source: FPGA/FAD/stable/FACT_FAD/FACT_FAD_lib/hdl/debouncer.vhd@ 246

Last change on this file since 246 was 246, checked in by dneise, 14 years ago
initial check in of 1st stable version.
File size: 2.7 KB
Line 
1----------------------------------------------------------------------------------
2-- Company:
3-- Engineer:
4--
5-- Create Date: 13:42:35 01/08/2010
6-- Design Name:
7-- Module Name: debouncer - Behavioral
8-- Project Name:
9-- Target Devices:
10-- Tool versions:
11-- Description:
12--
13-- Dependencies:
14--
15-- Revision:
16-- Revision 0.01 - File Created
17-- Additional Comments:
18--
19----------------------------------------------------------------------------------
20-- hds interface_start
21LIBRARY IEEE;
22USE IEEE.STD_LOGIC_1164.ALL;
23USE IEEE.NUMERIC_STD.ALL;
24
25-- -- Uncomment the following library declaration if instantiating
26-- -- any Xilinx primitives in this code.
27-- library UNISIM;
28-- use UNISIM.VComponents.all;
29--
30ENTITY debouncer IS
31 GENERIC(
32 WIDTH : INTEGER := 17
33 );
34 PORT(
35 clk : IN STD_LOGIC;
36 -- rst : in STD_LOGIC;
37 trigger_in : IN STD_LOGIC;
38 trigger_out : OUT STD_LOGIC := '0'
39 );
40
41-- Declarations
42
43END debouncer ;
44-- hds interface_end
45
46architecture Behavioral of debouncer is
47
48 signal counter : STD_LOGIC_VECTOR(WIDTH-1 downto 0) := (others => '0');
49 signal int_trigger : std_logic := '0';
50 signal temp_trig : std_logic_vector(1 downto 0) := "00";
51 signal trigger_flag : std_logic := '0';
52 signal temp_signal : std_logic := '0';
53
54begin
55
56 debounce_proc: process (clk)
57 begin
58-- if (rst = '1') then
59-- counter <= (others => '0');
60-- trigger_out <= '0';
61-- elsif rising_edge(clk) then
62 if rising_edge(clk) then
63 if (trigger_in = '1') then
64 if (unsigned(counter) = 2**WIDTH-1) then
65 int_trigger <= '1';
66 counter <= (others => '1');
67 else
68 counter <= std_logic_vector(unsigned(counter) + to_unsigned(1,WIDTH));
69 end if;
70 else
71 if (unsigned(counter) = 0) then
72 int_trigger <= '0';
73 counter <= (others => '0');
74 else
75 counter <= std_logic_vector(unsigned(counter) - to_unsigned(1,WIDTH));
76 end if;
77 end if;
78 end if;
79 end process debounce_proc;
80
81 shaping_proc : process (clk)
82 begin
83-- if (rst = '1') then
84-- trigger_out <= '0';
85-- trigger_flag <= '0';
86-- temp_signal <= '0';
87-- elsif rising_edge(clk) then
88 if rising_edge(clk) then
89-- temp_trig <= temp_trig(2 downto 0) & trigger_in;
90-- trigger_out <= not temp_trig(3) and temp_trig(2);
91 temp_trig <= temp_trig(0) & int_trigger;
92 temp_signal <= not temp_trig(1) and temp_trig(0);
93 trigger_out <= temp_signal and not trigger_flag;
94 if (int_trigger = '0') then
95 trigger_flag <= '0';
96 end if;
97 if (temp_signal = '1') then
98 trigger_flag <= '1';
99 end if;
100 end if;
101 end process shaping_proc;
102
103
104end Behavioral;
105
106
Note: See TracBrowser for help on using the repository browser.