source: FPGA/FAD/stable/FACT_FAD/FACT_FAD_lib/hdl/drs_pulser.vhd@ 692

Last change on this file since 692 was 246, checked in by dneise, 14 years ago
initial check in of 1st stable version.
File size: 9.0 KB
Line 
1library IEEE;
2use IEEE.STD_LOGIC_1164.ALL;
3use IEEE.STD_LOGIC_ARITH.ALL;
4use IEEE.std_logic_signed.all;
5
6library fact_fad_lib;
7use fact_fad_lib.fad_definitions.all;
8
9
10ENTITY drs_pulser is
11 port (
12 -- input CLK; RSRLOAD and SRCLK are derived from this signal
13 CLK : in std_logic;
14 -- async reset;
15 reset : in std_logic;
16
17 start_endless_mode : in std_logic;
18 start_read_stop_pos_mode : in std_logic;
19
20 SROUT_in_0 : in std_logic;
21 SROUT_in_1 : in std_logic;
22 SROUT_in_2 : in std_logic;
23 SROUT_in_3 : in std_logic;
24
25-- stop_pos_0 : out std_logic_vector(9 downto 0);
26-- stop_pos_1 : out std_logic_vector(9 downto 0);
27-- stop_pos_2 : out std_logic_vector(9 downto 0);
28-- stop_pos_3 : out std_logic_vector(9 downto 0);
29 stop_pos : out drs_s_cell_array_type;
30 stop_pos_valid : out std_logic;
31
32 RSRLOAD : out std_logic;
33 SRCLK : out std_logic;
34 busy :out std_logic
35 );
36end drs_pulser;
37
38
39ARCHITECTURE behavior of drs_pulser IS
40
41type states is (idle, started_endless, started_read_stop_pos , waiting_e, waiting_r, running_e, running_r);
42signal current_state : states := idle;
43signal next_state : states := idle;
44signal CEN,LEN : std_logic;
45
46
47signal local_roi : std_logic_vector (9 downto 0):= (others => '0');
48
49signal flag_read_stop_pos : std_logic := '0';
50
51signal cell_cntr : std_logic_vector (9 downto 0);
52signal cc_en : std_logic;
53signal cc_reset : std_logic;
54
55signal wait_cntr : std_logic_vector (2 downto 0);
56signal wc_en : std_logic;
57signal wc_reset : std_logic;
58
59signal int_stop_pos_0 : std_logic_vector(9 downto 0) := (others => '0');
60signal int_stop_pos_1 : std_logic_vector(9 downto 0) := (others => '0');
61signal int_stop_pos_2 : std_logic_vector(9 downto 0) := (others => '0');
62signal int_stop_pos_3 : std_logic_vector(9 downto 0) := (others => '0');
63
64begin
65 RSRLOAD <= (LEN and CLK);
66 SRCLK <= (CEN and CLK);
67 stop_pos(0) <= int_stop_pos_0;
68 stop_pos(1) <= int_stop_pos_1;
69 stop_pos(2) <= int_stop_pos_2;
70 stop_pos(3) <= int_stop_pos_3;
71
72
73
74 state_register: process(clk, reset)
75 begin
76 IF reset = '1' THEN
77 current_state <= idle ;
78 ELSIF clk = '0' and clk'event THEN -- ! falling edge !
79 current_state <= next_state ;
80 END IF;
81 end process state_register;
82
83 --Folgezustandsberechnung asynchron
84 transition: process(current_state,
85 start_endless_mode,
86 start_read_stop_pos_mode,
87 wait_cntr,
88 cell_cntr,
89 local_roi)
90 begin
91 CASE current_state IS
92 WHEN idle =>
93 if start_endless_mode = '1' then
94 next_state <= started_endless ;
95 elsif start_read_stop_pos_mode = '1' then
96 next_state <= started_read_stop_pos ;
97 end if;
98
99 WHEN started_endless =>
100 if cell_cntr = conv_std_logic_vector(1,10) then
101 next_state <= waiting_e;
102 end if;
103
104
105
106 WHEN started_read_stop_pos =>
107 if cell_cntr = conv_std_logic_vector(1,10) then
108 next_state <= waiting_r;
109 end if;
110
111 WHEN waiting_e =>
112 if wait_cntr = conv_std_logic_vector(0,3) then
113 next_state <= running_e;
114 else
115 next_state <= waiting_e;
116 end if;
117
118 WHEN waiting_r =>
119 if wait_cntr = conv_std_logic_vector(0,3) then
120 next_state <= running_r;
121 end if;
122
123
124 WHEN running_e =>
125 IF (start_endless_mode = '0') THEN
126 next_state <= idle;
127 END IF;
128
129 WHEN running_r =>
130 if cell_cntr >= local_roi THEN
131 next_state <= idle;
132 end if;
133 END CASE;
134 end process transition;
135
136 output_proc: process(current_state) --Ausgangsberechnung synchron, da current_state sich nur synchron aendert
137 begin
138 case current_state is
139
140 when idle =>
141 local_roi <= (others => '0');
142 flag_read_stop_pos <= '0';
143 stop_pos_valid <= '1';
144 LEN <= '0'; CEN <= '0';
145 busy <= '0';
146 cc_en <= '0'; cc_reset <= '1';
147 wc_en <= '0'; wc_reset <= '0';
148
149 when started_endless =>
150 local_roi <= "0111111111";
151 flag_read_stop_pos <= '0';
152 stop_pos_valid <= '0';
153 LEN <= '1'; CEN <= '0';
154 busy <= '1';
155 cc_en <= '1'; cc_reset <= '0';
156 wc_en <= '0'; wc_reset <= '1';
157
158 when started_read_stop_pos =>
159 local_roi <= conv_std_logic_vector(11,10);
160 flag_read_stop_pos <= '1';
161 stop_pos_valid <= '0';
162 LEN <= '1'; CEN <= '0';
163 busy <= '1';
164 cc_en <= '1'; cc_reset <= '0';
165 wc_en <= '0'; wc_reset <= '1';
166
167 when waiting_e | waiting_r =>
168 local_roi <= local_roi;
169 stop_pos_valid <= '0';
170 busy <= '1';
171 LEN <= '0'; CEN <= '0';
172 cc_en <= '0'; cc_reset <= '0';
173 wc_en <= '1'; wc_reset <= '0';
174
175 when running_e =>
176 flag_read_stop_pos <= '0';
177 stop_pos_valid <= '0';
178 LEN <= '0'; CEN <= '1';
179 cc_en <= '1'; cc_reset <= '0';
180 wc_en <= '0'; wc_reset <= '0';
181 busy <= '1';
182
183 when running_r =>
184 flag_read_stop_pos <= '1';
185 stop_pos_valid <= '0';
186 LEN <= '0'; CEN <= '1';
187 cc_en <= '1'; cc_reset <= '0';
188 wc_en <= '0'; wc_reset <= '0';
189 busy <= '1';
190 end case;
191 end process output_proc;
192
193
194 cellcounter: process (clk, cc_reset) begin
195
196 if (cc_reset = '1') then
197 cell_cntr <= (others=>'0');
198 elsif (rising_edge(clk)) then
199 if (cc_en = '1') then
200 cell_cntr <= cell_cntr + 1;
201 end if;
202 end if;
203
204 end process cellcounter;
205
206
207 waitcounter: process (clk, wc_reset) begin
208 if (wc_reset = '1') then
209 wait_cntr <= "011"; -- RSRLOAD -> warte 3 -> SRCLK
210 elsif (rising_edge(clk)) then
211 if (wc_en = '1') then
212 wait_cntr <= wait_cntr - 1;
213 end if;
214 end if;
215 end process waitcounter;
216
217 -- laut DRS4_rev09.pdf Seite 13 Figure 15
218 -- funktioniert das auslesen der Stop bzw. Startadresse so:
219 -- Sende 1x RSRLOAD- und mind. 9 SRCLK- pulse und sample SROUT zur
220 -- steigenden Flanke von SRCLK.
221 -- MSB first LSB last, kommen dann die 10 bits,
222 -- die die Stopposition darstellen.
223 --
224 -- diese Architecture liefert immer dann eine steigende Flanke
225 -- auf RSRCLK, wenn CLK eine steigende Flanke hat und CEN='1' ist.
226 -- Die an SROUT zur steigenden Flanke anliegenden Werte werden wie in einem Schieberegister
227 -- Schritt fuer Schritt in die stop_pos_x vectoren geschoben.
228 --
229 -- wenn sie 10 schritte weit reingschoben wurden, ist der process fertig.
230 -- es gibt keinen eigenen counter fuer die 10 schritte, der cell counter kann hier
231 -- missbraucht werden.
232 --
233 -- da der process eine steigende flanke auf SRCLK braucht um SROUT zu sampeln
234 -- wird im Prinzip ein Puls aud SRCLK *zuviel* erzeugt, das ist aber egal...
235 --
236 stop_pos_reader: process (CEN, clk, flag_read_stop_pos)
237 begin
238 IF (flag_read_stop_pos = '1') THEN -- nur wenn ich im read_stop_mode bin, laeuft dieser process
239 IF (CEN = '1') THEN -- nur wenn CEN='1' ist kommen SRCLK pulse raus.
240 IF (rising_edge(CLK)) THEN -- wenn steigende Flanke, dann SROUT samplen.
241 int_stop_pos_0 <= int_stop_pos_0(8 downto 0) & SROUT_in_0;
242 int_stop_pos_1 <= int_stop_pos_1(8 downto 0) & SROUT_in_1;
243 int_stop_pos_2 <= int_stop_pos_2(8 downto 0) & SROUT_in_2;
244 int_stop_pos_3 <= int_stop_pos_3(8 downto 0) & SROUT_in_3;
245
246 END IF; -- rising edge CLK
247 END IF; -- CEN ='1'
248 END IF; -- flag_read_stop_pos = '1'
249 end process stop_pos_reader;
250
251end behavior;
Note: See TracBrowser for help on using the repository browser.