source: branches/Corsika7500Compatibility/datacenter/scripts/setup.isdc.cta

#!/bin/sh
#
# ========================================================================
#
# *
# * This file is part of MARS, the MAGIC Analysis and Reconstruction
# * Software. It is distributed to you in the hope that it can be a useful
# * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
# * It is distributed WITHOUT ANY WARRANTY.
# *
# * Permission to use, copy, modify and distribute this software and its
# * documentation for any purpose is hereby granted without fee,
# * provided that the above copyright notice appear in all copies and
# * that both that copyright notice and this permission notice appear
# * in supporting documentation. It is provided "as is" without express
# * or implied warranty.
# *
#
#
#   Author(s): Daniela Dorner  08/2009 <mailto:daniela.dorner@unige.ch>
#
#   Copyright: MAGIC Software Development, 2000-2009
#
#
# ========================================================================
#
# This a resource file for the scripts, in which the standard paths and 
# functions, which are needed more often are stored. 
#

if [ "$rootsys" = "" ]
then 
   rootsys=/opt/root5.20.x86_64
fi
if ! export | grep ROOTSYS | grep $rootsys  >|/dev/null
then
   export ROOTSYS=$rootsys
   export PATH=$PATH:$ROOTSYS/bin
   export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ROOTSYS/lib/root
fi

# queuing system
queuesys=sge #isdc

# logging and setup
logpath=/share/cta/automation/autologs
lockpath=/share/cta/automation/locks
setuppath=/share/cta/automation/setup

## paths of data
#datapath=/magic/data
#subsystempath=/magic/subsystemdata
#sequpath=/magic/sequences
#datasetpath=/magic/datasets

# paths and setup for mc
mcpath=/share/cta
#mcrawpath=$mcpath/rawfiles
#mcsequpath=$mcpath/sequences
#corsikapath=/home/operator/Corsika/Mmcs6500/
#detectordir=/home/msmeyer/MC/MagicSoft/Simulation/Detector
#reflectorversion="reflector 0.7"
#cameraversion="camera 0.8"
#export FLUPRO=$corsikapath'/fluka2008_3'


#webpath=/www/htdocs/datacenter


# get paths for mars, macros and scripts
mars=`dirname $0 | sed -e 's/\/datacenter\/scripts//'`
macrospath=$mars/datacenter/macros
scriptspath=$mars/datacenter/scripts
# rcfiles
# dependencies of steps
steps=$mars/resources/steps_cta_new.rc
# file with db information
sqlrc=$mars/sql.rc


#addresses to which the errors are sent
erradrs="daniela.dorner@unige.ch" 
#addresses to which the changes are sent
adrs="daniela.dorner@unige.ch" 


#setup for jobmanager
sleeptime=30 #30
sleeptimelimit=360 #360
errorsleeptimedefault=60 #60
max=50 #maximum number of processes for one script in case there are more than one and the others do not have anything to do
totalmax=1600 #maximum number of processes (total) overwrites pnototal(we) in case it is smaller


#
# FIXME: 
# max anz an prozessen setzen
# besser Verhaeltnis zwischen den Prozessen und das am besten noch 
# automatisch anpassen 
# evtl noch maximale anz an callistos setzen
# 

#hour:            0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
pnototal=(       1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 )
pnototalwe=(     1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 )

pnosimtel=(       50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 )
pnosimtelwe=(     50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 )

# restricted to nodes => numbers per node 
pnochimp=(         2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnochimpwe=(       2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnoctastar=(       2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnoctastarwe=(     2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereob=(       2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereobwe=(     2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereoc=(       2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereocwe=(     2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereog=(       2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 
pnostereogwe=(     2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ) 

# set variables for jobmanager 
#scripts=( "runsimtel" "runchimp" "runctastar" "runstereo 2" "runstereo 3" "runstereo 7" )
#scriptscolname=( "fCorsikaSimTelarray" "fChimp" "fCTAStar" "fStereoB" "fStereoC" "fStereoG" )
#pnosweek=( ${pnosimtel[@]}   ${pnochimp[@]}   ${pnoctastar[@]}   ${pnostereob[@]}   ${pnostereoc[@]}   ${pnostereog[@]} )
#pnoswe=( ${pnosimtelwe[@]} ${pnochimpwe[@]} ${pnoctastarwe[@]} ${pnostereobwe[@]} ${pnostereocwe[@]} ${pnostereogwe[@]} )
scripts=( "runsimtel" "runchimp" "runctastar" )
scriptscolname=( "fCorsikaSimTelarray" "fChimp" "fCTAStar" )
pnosweek=( ${pnosimtel[@]}   ${pnochimp[@]}   ${pnoctastar[@]} )
pnoswe=( ${pnosimtelwe[@]} ${pnochimpwe[@]} ${pnoctastarwe[@]} )

# number of script that are limited to a certain node
#numrestrictedscripts=5
numrestrictedscripts=2

# set up for nodes 
#  for processes that can run only on certain node
#  db: fProductionHostKEY
minnode=0
maxnode=26
excludednodes=( 7 14 23 )