source: branches/Corsika7500Compatibility/mjobs/MJSimulation.cc@ 18459

Last change on this file since 18459 was 18450, checked in by ftemme, 9 years ago
Restructured the whole MJSimulation::Process method and added a lot of comments for a better overview what is done in ceres
File size: 48.4 KB
Line 
1/* ======================================================================== *\
2!
3! *
4! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5! * Software. It is distributed to you in the hope that it can be a useful
6! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7! * It is distributed WITHOUT ANY WARRANTY.
8! *
9! * Permission to use, copy, modify and distribute this software and its
10! * documentation for any purpose is hereby granted without fee,
11! * provided that the above copyright notice appear in all copies and
12! * that both that copyright notice and this permission notice appear
13! * in supporting documentation. It is provided "as is" without express
14! * or implied warranty.
15! *
16!
17!
18! Author(s): Thomas Bretz, 1/2009 <mailto:tbretz@astro.uni-wuerzburg.de>
19!
20! Copyright: MAGIC Software Development, 2000-2009
21!
22!
23\* ======================================================================== */
24
25/////////////////////////////////////////////////////////////////////////////
26//
27// MJSimulation
28//
29//
30// Force reading a corsika file even if the footer (RUNE-section) is missing
31// by setting fForceMode to kTRUE or from the resource file by
32//
33// ForceMode: Yes
34//
35//
36// To switch off the simulation of the camera electronics, use:
37//
38// Camera: Off
39//
40// Note, that the border of the camera and the propertied of the cones
41// are still simulated (simply because it is fast). Furthermore, this
42// switches off the trigger for the output, i.e. all data which deposits
43// at least one photon in at least one pixel is written to the output file.
44//
45//
46// In case of a pedestal or calibration run the artificial trigger can
47// be "switched off" and the cosmics trrigger "switched on" by setting
48// fForceTrigger to kTRUE or from the resource file by
49//
50// ForceTrigger: Yes
51//
52//
53/////////////////////////////////////////////////////////////////////////////
54#include "MJSimulation.h"
55
56#include <TEnv.h>
57#include <TCanvas.h>
58#include <iostream>
59
60// Core
61#include "MLog.h"
62#include "MLogManip.h"
63
64#include "MArgs.h"
65#include "MDirIter.h"
66#include "MParList.h"
67#include "MTaskList.h"
68#include "MEvtLoop.h"
69
70#include "MStatusDisplay.h"
71
72// Tasks
73#include "MCorsikaRead.h"
74#include "MContinue.h"
75#include "MFillH.h"
76#include "MGeomApply.h"
77#include "MParameterCalc.h"
78#include "MHillasCalc.h"
79#include "MImgCleanStd.h"
80#include "MWriteRootFile.h"
81#include "MWriteFitsFile.h"
82
83#include "MSimMMCS.h"
84#include "MSimAbsorption.h"
85#include "MSimAtmosphere.h"
86#include "MSimReflector.h"
87#include "MSimPointingPos.h"
88#include "MSimPSF.h"
89#include "MSimGeomCam.h"
90#include "MSimSignalCam.h"
91#include "MSimAPD.h"
92#include "MSimExcessNoise.h"
93#include "MSimCamera.h"
94#include "MSimTrigger.h"
95#include "MSimReadout.h"
96#include "MSimRandomPhotons.h"
97#include "MSimBundlePhotons.h"
98#include "MSimCalibrationSignal.h"
99
100// Histograms
101#include "MBinning.h"
102
103#include "MHn.h"
104#include "MHCamera.h"
105#include "MHCamEvent.h"
106#include "MHPhotonEvent.h"
107
108// Container
109#include "MRawRunHeader.h"
110#include "MParameters.h"
111#include "MReflector.h"
112#include "MParEnv.h"
113#include "MSpline3.h"
114#include "MParSpline.h"
115#include "MGeomCam.h"
116#include "MMatrix.h"
117
118#include "MPedestalCam.h"
119#include "MPedestalPix.h"
120
121ClassImp(MJSimulation);
122
123using namespace std;
124
125// --------------------------------------------------------------------------
126//
127// Default constructor.
128//
129// Sets fRuns to 0, fExtractor to NULL, fDataCheck to kFALSE
130//
131MJSimulation::MJSimulation(const char *name, const char *title)
132 : fForceMode(kFALSE), fCamera(kTRUE), fForceTrigger(kFALSE),
133 fWriteFitsFile(kFALSE), fOperationMode(kModeData), fRunNumber(-1)
134{
135 fName = name ? name : "MJSimulation";
136 fTitle = title ? title : "Standard analysis and reconstruction";
137}
138
139Bool_t MJSimulation::CheckEnvLocal()
140{
141 fForceMode = GetEnv("ForceMode", fForceMode);
142 fForceTrigger = GetEnv("ForceTrigger", fForceTrigger);
143 fCamera = GetEnv("Camera", fCamera);
144
145 return kTRUE;
146}
147
148Bool_t MJSimulation::WriteResult(const MParList &plist, const MSequence &seq, Int_t num)
149{
150 if (fPathOut.IsNull())
151 {
152 *fLog << inf << "No output path specified via SetPathOut - no output written." << endl;
153 return kTRUE;
154 }
155
156 TObjArray cont;
157 cont.Add(const_cast<TEnv*>(GetEnv()));
158 if (seq.IsValid())
159 cont.Add(const_cast<MSequence*>(&seq));
160
161 cont.Add(plist.FindObject("PulseShape"));
162 cont.Add(plist.FindObject("Reflector"));
163 cont.Add(plist.FindObject("MGeomCam"));
164 cont.Add(plist.FindObject("GeomCones"));
165
166 TNamed cmdline("CommandLine", fCommandLine.Data());
167 cont.Add(&cmdline);
168
169 if (fDisplay)
170 {
171 TString title = "-- Ceres";
172 if (seq.IsValid())
173 {
174 title += ": ";
175 title += seq.GetSequence();
176 }
177 title += " --";
178 fDisplay->SetTitle("Ceres", kFALSE);
179
180 cont.Add(fDisplay);
181 }
182
183 const TString name = Form("ceres%08d.root", num);
184 return WriteContainer(cont, name, "RECREATE");
185}
186
187void MJSimulation::SetupHist(MHn &hist) const
188{
189 hist.AddHist("MCorsikaEvtHeader.fTotalEnergy");
190 hist.InitName("Energy");
191 hist.InitTitle("Energy;E [GeV]");
192 hist.SetLog(kTRUE, kTRUE, kFALSE);
193
194 hist.AddHist("MPhotonEvent.GetNumExternal");
195 hist.InitName("Size");
196 hist.InitTitle("Size;S [#]");
197 hist.SetLog(kTRUE, kTRUE, kFALSE);
198
199 /*
200 hist.AddHist("-MCorsikaEvtHeader.fX/100","-MCorsikaEvtHeader.fY/100");
201 hist.SetDrawOption("colz");
202 hist.InitName("Impact;Impact;Impact");
203 hist.InitTitle("Impact;West <--> East [m];South <--> North [m]");
204 hist.SetAutoRange();
205 */
206
207 hist.AddHist("MCorsikaEvtHeader.GetImpact/100");
208 hist.InitName("Impact");
209 hist.InitTitle("Impact;Impact [m]");
210 hist.SetAutoRange();
211
212 hist.AddHist("MCorsikaEvtHeader.fFirstInteractionHeight/100000");
213 hist.InitName("Height");
214 hist.InitTitle("FirstInteractionHeight;h [km]");
215
216 hist.AddHist("(MCorsikaEvtHeader.fAz+MCorsikaRunHeader.fMagneticFieldAz)*TMath::RadToDeg()", "MCorsikaEvtHeader.fZd*TMath::RadToDeg()");
217 hist.InitName("SkyOrigin;Az;Zd");
218 hist.InitTitle("Sky Origin;Az [\\circ];Zd [\\circ]");
219 hist.SetDrawOption("colz");
220 hist.SetAutoRange();
221
222 hist.AddHist("IncidentAngle.fVal");
223 hist.InitName("ViewCone");
224 hist.InitTitle("Incident Angle;\\alpha [\\circ]");
225}
226
227template<class T>
228void MJSimulation::SetupCommonFileStructure(T &write) const
229{
230 // Common run headers
231 write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE, 1);
232 write.AddContainer("MCorsikaRunHeader", "RunHeaders", kFALSE, 1);
233 write.AddContainer("MRawRunHeader", "RunHeaders", kTRUE, 1);
234 write.AddContainer("MGeomCam", "RunHeaders", kTRUE, 1);
235 write.AddContainer("MMcRunHeader", "RunHeaders", kTRUE, 1);
236
237 // Common events
238 write.AddContainer("MCorsikaEvtHeader", "Events", kFALSE);
239 write.AddContainer("MRawEvtHeader", "Events");
240 write.AddContainer("MMcEvt", "Events", kFALSE);
241 write.AddContainer("MMcEvtBasic", "Events", kFALSE);
242 write.AddContainer("IncidentAngle", "Events", kFALSE);
243 write.AddContainer("MPointingPos", "Events", kFALSE);
244 write.AddContainer("MSimSourcePos", "Events", kFALSE);
245}
246
247void MJSimulation::SetupHeaderKeys(MWriteFitsFile &write,MRawRunHeader &header) const
248{
249 const MTime now(-1);
250 write.SetHeaderKey("ISMC",true,"Bool if File is Montecarlo File");
251 write.SetHeaderKey("TELESCOP", "FACT", "");
252 write.SetHeaderKey("PACKAGE", "MARS Cheobs", "");
253 write.SetHeaderKey("VERSION", "1.0", "");
254 write.SetHeaderKey("CREATOR", "Ceres", "");
255 write.SetHeaderKey("EXTREL", 1., "");
256 write.SetHeaderKey("COMPILED", __DATE__" " __TIME__, "");
257 write.SetHeaderKey("REVISION", "0", "");
258 write.SetHeaderKey("ORIGIN", "FACT", "");
259 write.SetHeaderKey("DATE", now.GetStringFmt("%Y-%m-%dT%H:%M:%S").Data(), "");
260 write.SetHeaderKey("NIGHT", now.GetNightAsInt(), "");
261 write.SetHeaderKey("TIMESYS", "UTC", "");
262 write.SetHeaderKey("TIMEUNIT", "d", "");
263 write.SetHeaderKey("MJDREF", 40587, "");
264 //write.SetHeaderKey("BLDVER", 1, "");
265 write.SetHeaderKey("RUNID", header.GetRunNumber(), "");
266 write.SetHeaderKey("NBOARD", 40, "");
267 write.SetHeaderKey("NPIX", header.GetNumPixel(), "");
268 write.SetHeaderKey("NROI", header.GetNumSamplesHiGain(), "");
269 write.SetHeaderKey("NROITM", 0, "");
270 write.SetHeaderKey("TMSHIFT", 0, "");
271 write.SetHeaderKey("CAMERA", "MGeomCamFACT", "");
272 write.SetHeaderKey("DAQ", "DRS4", "");
273
274 // FTemme: ADCRANGE and ADC have to be calculated, using the values for
275 // the fadctype.
276// write.SetHeaderKey("ADCRANGE", 2000, "Dynamic range in mV");
277// write.SetHeaderKey("ADC", 12, "Resolution in bits");
278
279 switch(header.GetRunType())
280 {
281 case MRawRunHeader::kRTData|MRawRunHeader::kRTMonteCarlo:
282 write.SetHeaderKey("RUNTYPE", "data", "");
283 break;
284 case MRawRunHeader::kRTPedestal|MRawRunHeader::kRTMonteCarlo:
285 write.SetHeaderKey("RUNTYPE", "pedestal", "");
286 break;
287 case MRawRunHeader::kRTCalibration|MRawRunHeader::kRTMonteCarlo:
288 write.SetHeaderKey("RUNTYPE", "calibration", "");
289 break;
290 }
291// write.SetHeaderKey("ID", 777, "Board 0: Board ID");
292// write.SetHeaderKey("FMVER", 532, "Board 0: Firmware Version");
293// write.SetHeaderKey("DNA", "0", "");
294// write.SetHeaderKey("BOARD", 0, "");
295// write.SetHeaderKey("PRESC", 40, "");
296// write.SetHeaderKey("PHASE", 0, "");
297// write.SetHeaderKey("DAC0", 26500, "");
298// write.SetHeaderKey("DAC1", 0, "");
299// write.SetHeaderKey("DAC2", 0, "");
300// write.SetHeaderKey("DAC3", 0, "");
301// write.SetHeaderKey("DAC4", 28800, "");
302// write.SetHeaderKey("DAC5", 28800, "");
303// write.SetHeaderKey("DAC6", 28800, "");
304// write.SetHeaderKey("DAC7", 28800, "");
305 write.SetHeaderKey("REFCLK", header.GetFreqSampling(), "");
306 write.SetHeaderKey("DRSCALIB", false, "");
307// write.SetHeaderKey("TSTARTI", 0, "");
308// write.SetHeaderKey("TSTARTF", 0., "");
309// write.SetHeaderKey("TSTOPI", 0, "");
310// write.SetHeaderKey("TSTOPF", 0., "");
311// write.SetHeaderKey("DATE-OBS", "1970-01-01T00:00:00", "");
312// write.SetHeaderKey("DATE-END", "1970-01-01T00:00:00", "");
313// write.SetHeaderKey("NTRG", 0, "");
314// write.SetHeaderKey("NTRGPED", 0, "");
315// write.SetHeaderKey("NTRGLPE", 0, "");
316// write.SetHeaderKey("NTRGTIM", 0, "");
317// write.SetHeaderKey("NTRGLPI", 0, "");
318// write.SetHeaderKey("NTRGEXT1", 0, "");
319// write.SetHeaderKey("NTRGEXT2", 0, "");
320// write.SetHeaderKey("NTRGMISC", 0, "");
321}
322
323void MJSimulation::SetupVetoColumns(MWriteFitsFile &write) const
324{
325 write.VetoColumn("MParameterD.fVal");
326 write.VetoColumn("MRawEvtData.fLoGainPixId");
327 write.VetoColumn("MRawEvtData.fLoGainFadcSamples");
328 write.VetoColumn("MRawEvtData.fABFlags");
329 write.VetoColumn("MRawEvtHeader.fNumTrigLvl2");
330 //write.VetoColumn("MRawEvtHeader.fTrigPattern");
331 write.VetoColumn("MRawEvtHeader.fNumLoGainOn");
332}
333
334// Setup the header accordingly to the used operation mode
335void MJSimulation::SetupHeaderOperationMode(MRawRunHeader &header) const
336{
337 switch (fOperationMode)
338 {
339 case kModeData:
340 header.SetRunType(MRawRunHeader::kRTMonteCarlo|MRawRunHeader::kRTData);
341 header.SetRunInfo(0, fRunNumber<0 ? 3 : fRunNumber);
342 break;
343
344 case kModePed:
345 header.SetRunType(MRawRunHeader::kRTMonteCarlo|MRawRunHeader::kRTPedestal);
346 header.SetSourceInfo("Pedestal");
347 header.SetRunInfo(0, fRunNumber<0 ? 1 : fRunNumber);
348 break;
349
350 case kModeCal:
351 header.SetRunType(MRawRunHeader::kRTMonteCarlo|MRawRunHeader::kRTCalibration);
352 header.SetSourceInfo("Calibration");
353 header.SetRunInfo(0, fRunNumber<0 ? 2 : fRunNumber);
354 break;
355
356 case kModePointRun:
357 header.SetRunType(MRawRunHeader::kRTMonteCarlo|MRawRunHeader::kRTPointRun);
358 header.SetRunInfo(0, fRunNumber<0 ? 0 : fRunNumber);
359 break;
360 }
361}
362
363void MJSimulation::CreateBinningObjects(MParList &plist) const
364{
365 MBinning *binse = (MBinning*) plist.FindCreateObj("MBinning","BinningEnergy");
366 binse->SetEdges(120, 1, 1000000,"log");
367 MBinning *binsth = (MBinning*) plist.FindCreateObj("MBinning","BinningThreshold");
368 binsth->SetEdges( 60, 0.9, 900000, "log");
369 MBinning *binsee = (MBinning*) plist.FindCreateObj("MBinning","BinningEnergyEst");
370 binsee->SetEdges( 36, 0.9, 900000, "log");
371 MBinning *binss = (MBinning*) plist.FindCreateObj("MBinning","BinningSize");
372 binss->SetEdges( 100, 1, 10000000, "log");
373 MBinning *binsi = (MBinning*) plist.FindCreateObj("MBinning","BinningImpact");
374 binsi->SetEdges( 32, 0, 800);
375 MBinning *binsh = (MBinning*) plist.FindCreateObj("MBinning","BinningHeight");
376 binsh->SetEdges( 150, 0, 50);
377 MBinning *binsaz = (MBinning*) plist.FindCreateObj("MBinning","BinningAz");
378 binsaz->SetEdges(720, -360, 360);
379 MBinning *binszd = (MBinning*) plist.FindCreateObj("MBinning","BinningZd");
380 binszd->SetEdges( 70, 0, 70);
381 MBinning *binsvc = (MBinning*) plist.FindCreateObj("MBinning","BinningViewCone");
382 binsvc->SetEdges( 35, 0, 7);
383 MBinning *binsel = (MBinning*) plist.FindCreateObj("MBinning","BinningTotLength");
384 binsel->SetEdges(150, 0, 50);
385 MBinning *binsew = (MBinning*) plist.FindCreateObj("MBinning","BinningMedLength");
386 binsew->SetEdges(150, 0, 15);
387 plist.FindCreateObj("MBinning","BinningDistC");
388 plist.FindCreateObj("MBinning","BinningDist");
389 plist.FindCreateObj("MBinning","BinningTrigPos");
390}
391
392Bool_t MJSimulation::Process(const MArgs &args, const MSequence &seq)
393{
394 // --------------------------------------------------------------------------------
395 // --------------------------------------------------------------------------------
396 // Initialization
397 // --------------------------------------------------------------------------------
398 // --------------------------------------------------------------------------------
399
400 // --------------------------------------------------------------------------------
401 // Logging output:
402 // --------------------------------------------------------------------------------
403 // - description of the job itself
404 // - list of the to processed sequence
405 *fLog << inf;
406 fLog->Separator(GetDescriptor());
407
408 if (!CheckEnv())
409 return kFALSE;
410
411 if (seq.IsValid())
412 *fLog << fSequence.GetFileName() << endl;
413 else
414 *fLog << "Input: " << args.GetNumArguments() << "-files" << endl;
415 *fLog << endl;
416
417 MDirIter iter;
418 if (seq.IsValid() && seq.GetRuns(iter, MSequence::kCorsika)<=0)
419 {
420 *fLog << err << "ERROR - Sequence valid but without files." << endl;
421 return kFALSE;
422 }
423 // --------------------------------------------------------------------------------
424 // Setup MParList and MTasklist
425 // --------------------------------------------------------------------------------
426 MParList plist;
427 plist.AddToList(this); // take care of fDisplay!
428 // setup TaskList
429 MTaskList tasks;
430 plist.AddToList(&tasks);
431
432 // --------------------------------------------------------------------------------
433 // --------------------------------------------------------------------------------
434 // Parameter Container Setup
435 // --------------------------------------------------------------------------------
436 // --------------------------------------------------------------------------------
437
438 // --------------------------------------------------------------------------------
439 // Setup container for the reflector, the cones and the camera geometry
440 // --------------------------------------------------------------------------------
441 // FIXME: Allow empty GeomCones!
442 MParEnv env0("Reflector");
443 MParEnv env1("GeomCones");
444 MParEnv env2("MGeomCam");
445 env0.SetClassName("MReflector");
446 env1.SetClassName("MGeomCam");
447 env2.SetClassName("MGeomCam");
448 plist.AddToList(&env0);
449 plist.AddToList(&env1);
450 plist.AddToList(&env2);
451 // --------------------------------------------------------------------------------
452 // Setup container for the "camera array" of the extracted number of photons
453 // --------------------------------------------------------------------------------
454 // from ExtractorRndm
455 plist.FindCreateObj("MPedPhotCam", "MPedPhotFromExtractorRndm");
456 // --------------------------------------------------------------------------------
457 // Setup spline containers for:
458 // --------------------------------------------------------------------------------
459 // - the pulse shape
460 // - the different photon acceptance splines
461 MParSpline shape("PulseShape");
462 MParSpline splinepde("PhotonDetectionEfficiency");
463 MParSpline splinemirror("MirrorReflectivity");
464 MParSpline splinecones("ConesAngularAcceptance");
465 MParSpline splinecones2("ConesTransmission");
466 MParSpline splineAdditionalPhotonAcceptance("AdditionalPhotonAcceptance");
467 plist.AddToList(&shape);
468 plist.AddToList(&splinepde);
469 plist.AddToList(&splinemirror);
470 plist.AddToList(&splinecones);
471 plist.AddToList(&splinecones2);
472 plist.AddToList(&splineAdditionalPhotonAcceptance);
473
474 // --------------------------------------------------------------------------------
475 // Setup container for the MC run header and the Raw run header
476 // --------------------------------------------------------------------------------
477 plist.FindCreateObj("MMcRunHeader");
478
479 MRawRunHeader header;
480 header.SetValidMagicNumber();
481 SetupHeaderOperationMode(header);
482 // FIXME: Move to MSimPointingPos, MSimCalibrationSignal
483 // Can we use this as input for MSimPointingPos?
484 header.SetObservation("On", "MonteCarlo");
485 plist.AddToList(&header);
486
487 // --------------------------------------------------------------------------------
488 // Setup container for the intended pulse position and for the trigger position
489 // --------------------------------------------------------------------------------
490 MParameterD pulpos("IntendedPulsePos");
491 // FIXME: Set a default which could be 1/3 of the digitization window
492 // pulpos.SetVal(40); // [ns]
493 plist.AddToList(&pulpos);
494
495 MParameterD trigger("TriggerPos");
496 trigger.SetVal(0);
497 plist.AddToList(&trigger);
498
499
500 // --------------------------------------------------------------------------------
501 // Setup container for the fix time offset, for residual time spread and for gapd time jitter
502 // --------------------------------------------------------------------------------
503 // Dominik and Sebastian on: fix time offsets
504 MMatrix fix_time_offsets_between_pixels_in_ns(
505 "MFixTimeOffset","titel"
506 );
507 plist.AddToList(&fix_time_offsets_between_pixels_in_ns);
508
509 // Jens Buss on: residual time spread
510 MParameterD resTimeSpread("ResidualTimeSpread");
511 resTimeSpread.SetVal(0.0);
512 plist.AddToList(&resTimeSpread);
513 // Jens Buss on: residual time spread
514 MParameterD gapdTimeJitter("GapdTimeJitter");
515 gapdTimeJitter.SetVal(0.0);
516 plist.AddToList(&gapdTimeJitter);
517
518 // --------------------------------------------------------------------------------
519 // Creation of binning objects and apply default settings
520 // --------------------------------------------------------------------------------
521 CreateBinningObjects(plist);
522
523 // --------------------------------------------------------------------------------
524 // --------------------------------------------------------------------------------
525 // Tasks Setup (Reading, Absorption, Reflector)
526 // --------------------------------------------------------------------------------
527 // --------------------------------------------------------------------------------
528
529 // --------------------------------------------------------------------------------
530 // Corsika read setup
531 // --------------------------------------------------------------------------------
532 MCorsikaRead read;
533 read.SetForceMode(fForceMode);
534
535 if (!seq.IsValid())
536 {
537 for (int i=0; i<args.GetNumArguments(); i++)
538 read.AddFile(args.GetArgumentStr(i));
539 }
540 else
541 read.AddFiles(iter);
542
543 // --------------------------------------------------------------------------------
544 // Precut
545 // --------------------------------------------------------------------------------
546 MContinue precut("", "PreCut");
547 precut.IsInverted();
548 precut.SetAllowEmpty();
549
550 // --------------------------------------------------------------------------------
551 // MSimMMCS (don't know what this is doing) and calculation of the incident angle
552 // --------------------------------------------------------------------------------
553 MSimMMCS simmmcs;
554 const TString sin2 = "sin(MCorsikaEvtHeader.fZd)*sin(MCorsikaRunHeader.fZdMin*TMath::DegToRad())";
555 const TString cos2 = "cos(MCorsikaEvtHeader.fZd)*cos(MCorsikaRunHeader.fZdMin*TMath::DegToRad())";
556 const TString cos = "cos(MCorsikaEvtHeader.fAz-MCorsikaRunHeader.fAzMin*TMath::DegToRad())";
557
558 const TString form = "acos("+sin2+"*"+cos+"+"+cos2+")*TMath::RadToDeg()";
559
560 MParameterCalc calcangle(form, "CalcIncidentAngle");
561 calcangle.SetNameParameter("IncidentAngle");
562
563 // --------------------------------------------------------------------------------
564 // Absorption tasks
565 // --------------------------------------------------------------------------------
566 // - Atmosphere (simatm)
567 // - photon detection efficiency (absapd)
568 // - mirror reflectivity (absmir)
569 // - angular acceptance of winston cones (cones)
570 // - transmission of winston cones (cones2)
571 // - additional photon acceptance (only motivated, not measured) (additionalPhotonAcceptance)
572 MSimAtmosphere simatm;
573 MSimAbsorption absapd("SimPhotonDetectionEfficiency");
574 MSimAbsorption absmir("SimMirrorReflectivity");
575 MSimAbsorption cones("SimConesAngularAcceptance");
576 MSimAbsorption cones2("SimConesTransmission");
577 MSimAbsorption additionalPhotonAcceptance("SimAdditionalPhotonAcceptance");
578 absapd.SetParName("PhotonDetectionEfficiency");
579 absmir.SetParName("MirrorReflectivity");
580 cones.SetParName("ConesAngularAcceptance");
581 cones.SetUseTheta();
582 cones2.SetParName("ConesTransmission");
583 additionalPhotonAcceptance.SetParName("AdditionalPhotonAcceptance");
584
585 // --------------------------------------------------------------------------------
586 // Simulating pointing position and simulating reflector
587 // --------------------------------------------------------------------------------
588 MSimPointingPos pointing;
589
590 MSimReflector reflect;
591 reflect.SetNameGeomCam("GeomCones");
592 reflect.SetNameReflector("Reflector");
593// MSimStarField stars;
594
595 // --------------------------------------------------------------------------------
596 // Continue tasks
597 // --------------------------------------------------------------------------------
598 // - Processing of the current events stops, if there aren't at least two photons (see cont3)
599 MContinue cont1("MPhotonEvent.GetNumPhotons<1", "ContEmpty1");
600 MContinue cont2("MPhotonEvent.GetNumPhotons<1", "ContEmpty2");
601 MContinue cont3("MPhotonEvent.GetNumPhotons<2", "ContEmpty3");
602 cont1.SetAllowEmpty();
603 cont2.SetAllowEmpty();
604 cont3.SetAllowEmpty();
605
606 // --------------------------------------------------------------------------------
607 // --------------------------------------------------------------------------------
608 // Tasks Setup (Cones, SiPM-Simulation, RandomPhotons, Camera, Trigger, DAQ)
609 // --------------------------------------------------------------------------------
610 // --------------------------------------------------------------------------------
611
612 // --------------------------------------------------------------------------------
613 // GeomApply, SimPSF, SimGeomCam, SimCalibrationSignal
614 // --------------------------------------------------------------------------------
615 // - MGeomApply only resizes all MGeomCam parameter container to the actual
616 // number of pixels
617 // - MSimPSF applies an additional smearing of the photons on the camera window
618 // on default it is switched of (set to 0), but can be applied by setting:
619 // MSimPSF.fSigma: <value>
620 // in the config file.
621 // Be aware, that there is also a smearing of the photons implemented in
622 // MSimReflector by setting:
623 // MReflector.SetSigmaPSF: <value>
624 // in the config file. This is at the moment done in the default config file.
625 // - MSimGeomCam identifies which pixel was hit by which photon
626 // - MSimCalibrationSignal is only used for simulated calibration runs
627 MGeomApply apply;
628
629 MSimPSF simpsf;
630
631 MSimGeomCam simgeom;
632 simgeom.SetNameGeomCam("GeomCones");
633
634 MSimCalibrationSignal simcal;
635 simcal.SetNameGeomCam("GeomCones");
636
637 // --------------------------------------------------------------------------------
638 // Simulation of random photons
639 // --------------------------------------------------------------------------------
640 // - be aware that here default values for the nsb rate and for the dark
641 // count rate are set. They will be overwritten if the values are defined
642 // in the config file
643 // - if you want to simulate a specific nsb rate you have to set the filename
644 // in the config file to an empty string and then you can specify the NSB rate:
645 // MSimRandomPhotons.FileNameNSB:
646 // MSimRandomPhotons.FrequencyNSB: 0.0
647
648 // Sky Quality Meter: 21.82M = 2.02e-4cd/m^2
649 // 1cd = 12.566 lm / 4pi sr
650 // FIXME: Simulate photons before cones and QE!
651 MSimRandomPhotons simnsb;
652 simnsb.SetFreq(5.8, 0.004); // ph/m^2/nm/sr/ns NSB, 4MHz dark count rate
653 simnsb.SetNameGeomCam("GeomCones");
654 // FIXME: How do we handle star-light? We need the rate but we also
655 // need to process it through the mirror!
656
657 // --------------------------------------------------------------------------------
658 // Simulation from the SiPM to the DAQ
659 // --------------------------------------------------------------------------------
660 // - MSimAPD simulates the whole behaviour of the SiPMs:
661 // (dead time of cells, crosstalk, afterpulses)
662 // - MSimExcessNoise adds a spread on the weight of each signal in the SiPMs
663 // - MSimBundlePhotons restructured the photon list of MPhotonEvent via a look
664 // up table. At the moment the tasks is skipped, due to the fact that there
665 // is no file name specified in the config file
666 // - MSimSignalCam only fills a SignalCam container for the cherenkov photons
667 // - MSimCamera simulates the behaviour of the camera:
668 // (electronic noise, accoupling, time smearing and offset for the photons,
669 // pulses injected by all photons)
670 // - MSimTrigger simulates the behaviour of the Trigger:
671 // (Adding patch voltages, applying clipping, applying discriminator, applying
672 // time over threshold and a possible trigger logic)
673 // - MContinue conttrig stops the processing of the current event if the trigger
674 // position is negativ (and therefore not valid)
675 // - MSimReadout simulates the behaviour of the readout:
676 // (Digitization and saturation of the ADC)
677 MSimAPD simapd;
678 simapd.SetNameGeomCam("GeomCones");
679
680 MSimExcessNoise simexcnoise;
681 MSimBundlePhotons simsum;
682 MSimSignalCam simsignal;
683 MSimCamera simcam;
684 MSimTrigger simtrig;
685 MContinue conttrig("TriggerPos.fVal<0", "ContTrigger");
686 MSimReadout simdaq;
687
688 // --------------------------------------------------------------------------------
689 // Standard analysis with hillas parameters for the true cherenkov photons
690 // --------------------------------------------------------------------------------
691 // Remove isolated pixels
692 MImgCleanStd clean(0, 0);
693 //clean.SetCleanLvl0(0); // The level above which isolated pixels are kept
694 clean.SetCleanRings(0);
695 clean.SetMethod(MImgCleanStd::kAbsolute);
696
697 //clean.SetNamePedPhotCam("MPedPhotFromExtractorRndm");
698
699 MHillasCalc hcalc;
700 hcalc.Disable(MHillasCalc::kCalcConc);
701
702
703 // --------------------------------------------------------------------------------
704 // Setup of histogram containers and the corresponding fill tasks
705 // --------------------------------------------------------------------------------
706 // Here is no functionality for the simulation, it is only visualization via
707 // showplot
708 MHn mhn1, mhn2, mhn3, mhn4;
709 SetupHist(mhn1);
710 SetupHist(mhn2);
711 SetupHist(mhn3);
712 SetupHist(mhn4);
713
714 MH3 mhtp("TriggerPos.fVal-IntendedPulsePos.fVal-PulseShape.GetWidth");
715 mhtp.SetName("TrigPos");
716 mhtp.SetTitle("Trigger position w.r.t. the first photon hitting a detector");
717
718 MH3 mhew("MPhotonStatistics.fLength");
719 mhew.SetName("TotLength");
720 mhew.SetTitle("Time between first and last photon hitting a detector;L [ns]");
721
722 MH3 mhed("MPhotonStatistics.fTimeMedDev");
723 mhed.SetName("MedLength");
724 mhed.SetTitle("Median deviation (1\\sigma);L [ns]");
725
726 MFillH fillh1(&mhn1, "", "FillCorsika");
727 MFillH fillh2(&mhn2, "", "FillH2");
728 MFillH fillh3(&mhn3, "", "FillH3");
729 MFillH fillh4(&mhn4, "", "FillH4");
730 MFillH filltp(&mhtp, "", "FillTriggerPos");
731 MFillH fillew(&mhew, "", "FillEvtWidth");
732 MFillH filled(&mhed, "", "FillMedDev");
733 fillh1.SetNameTab("Corsika", "Distribution as simulated by Corsika");
734 fillh2.SetNameTab("Detectable", "Distribution of events hit the detector");
735 fillh3.SetNameTab("Triggered", "Distribution of triggered events");
736 fillh4.SetNameTab("Cleaned", "Distribution after cleaning and cuts");
737 filltp.SetNameTab("TrigPos", "TriggerPosition w.r.t the first photon");
738 fillew.SetNameTab("EvtWidth", "Time between first and last photon hitting a detector");
739 filled.SetNameTab("MedDev", "Median deviation of arrival time of photons hitting a detector");
740
741 MHPhotonEvent planeG(1, "HPhotonEventGround"); // Get from MaxImpact
742 MHPhotonEvent plane0(2, "HMirrorPlane0"); // Get from MReflector
743 //MHPhotonEvent plane1(2, "HMirrorPlane1");
744 MHPhotonEvent plane2(2, "HMirrorPlane2");
745 MHPhotonEvent plane3(2, "HMirrorPlane3");
746 MHPhotonEvent plane4(2, "HMirrorPlane4");
747 MHPhotonEvent planeF1(6, "HPhotonEventCamera"); // Get from MGeomCam
748 MHPhotonEvent planeF2(header.IsPointRun()?4:6, "HPhotonEventCones"); // Get from MGeomCam
749
750 plist.AddToList(&planeG);
751 plist.AddToList(&plane0);
752 plist.AddToList(&plane2);
753 plist.AddToList(&plane3);
754 plist.AddToList(&plane4);
755 plist.AddToList(&planeF1);
756 plist.AddToList(&planeF2);
757
758 //MHPSF psf;
759
760 MFillH fillG(&planeG, "MPhotonEvent", "FillGround");
761 MFillH fill0(&plane0, "MirrorPlane0", "FillReflector");
762 //MFillH fill1(&plane1, "MirrorPlane1", "FillCamShadow");
763 MFillH fill2(&plane2, "MirrorPlane2", "FillCandidates");
764 MFillH fill3(&plane3, "MirrorPlane3", "FillReflected");
765 MFillH fill4(&plane4, "MirrorPlane4", "FillFocal");
766 MFillH fillF1(&planeF1, "MPhotonEvent", "FillCamera");
767 MFillH fillF2(&planeF2, "MPhotonEvent", "FillCones");
768 //MFillH fillP(&psf, "MPhotonEvent", "FillPSF");
769
770 fillG.SetNameTab("Ground", "Photon distribution at ground");
771 fill0.SetNameTab("Reflector", "Photon distribution at reflector plane w/o camera shadow");
772 //fill1.SetNameTab("CamShadow", "Photon distribution at reflector plane w/ camera shadow");
773 fill2.SetNameTab("Candidates", "*Can hit* photon distribution at reflector plane w/ camera shadow");
774 fill3.SetNameTab("Reflected", "Photon distribution after reflector projected to reflector plane");
775 fill4.SetNameTab("Focal", "Photon distribution at focal plane");
776 fillF1.SetNameTab("Camera", "Photon distribution which hit the detector");
777 fillF2.SetNameTab("Cones", "Photon distribution after cones");
778 //fillP.SetNameTab("PSF", "Photon distribution after cones for all mirrors");
779
780
781 MHCamEvent evt0a(/*10*/3, "Signal", "Average signal (absolute);;S [ph]");
782 MHCamEvent evt0c(/*10*/3, "MaxSignal", "Maximum signal (absolute);;S [ph]");
783 MHCamEvent evt0d(/*11*/8, "ArrTm", "Time after first photon;;T [ns]");
784 evt0a.SetErrorSpread(kFALSE);
785 evt0c.SetCollectMax();
786
787 MContinue cut("", "Cut");
788
789 MFillH fillx0a(&evt0a, "MSignalCam", "FillAvgSignal");
790 MFillH fillx0c(&evt0c, "MSignalCam", "FillMaxSignal");
791 MFillH fillx0d(&evt0d, "MSignalCam", "FillArrTm");
792 MFillH fillx1("MHHillas", "MHillas", "FillHillas");
793 MFillH fillx3("MHHillasSrc", "MHillasSrc", "FillHillasSrc");
794 MFillH fillx4("MHNewImagePar", "MNewImagePar", "FillNewImagePar");
795 MFillH fillth("MHThreshold", "", "FillThreshold");
796 MFillH fillca("MHCollectionArea", "", "FillTrigArea");
797
798 fillth.SetNameTab("Threshold");
799 fillca.SetNameTab("TrigArea");
800
801 // --------------------------------------------------------------------------------
802 // Formating of the outputfilepath
803 // --------------------------------------------------------------------------------
804 if (!fFileOut.IsNull())
805 {
806 const Ssiz_t dot = fFileOut.Last('.');
807 const Ssiz_t slash = fFileOut.Last('/');
808 if (dot>slash)
809 fFileOut = fFileOut.Remove(dot);
810 }
811 const char *fmt = fFileOut.IsNull() ?
812 Form("s/cer([0-9]+)([0-9][0-9][0-9])/%s\\/%08d.$2%%s_MonteCarlo$1.root/", Esc(fPathOut).Data(), header.GetRunNumber()) :
813 Form("%s/%s%%s.root", Esc(fPathOut).Data(), Esc(fFileOut).Data());
814
815 const TString rule1(Form(fmt, fFileOut.IsNull()?"_R":""));
816 const TString rule2(Form(fmt, "_Y"));
817 const TString rule4(Form(fmt, "_I"));
818 TString rule3(Form(fmt, Form("_%c", header.GetRunTypeChar())));
819
820 // --------------------------------------------------------------------------------
821 // Setup of the outputfile tasks
822 // --------------------------------------------------------------------------------
823 MWriteRootFile write4a( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
824 MWriteRootFile write4b( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
825 MWriteRootFile write3b( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
826 MWriteRootFile write2a( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
827 MWriteRootFile write2b( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
828 MWriteRootFile write1a( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
829 MWriteRootFile write1b( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
830
831 if (fWriteFitsFile)
832 rule3.ReplaceAll(".root", ".fits");
833
834 MWriteFitsFile write3af( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
835 MWriteRootFile write3ar( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
836
837 MTask &write3a = fWriteFitsFile ? static_cast<MTask&>(write3af) : static_cast<MTask&>(write3ar);
838
839 //SetupHeaderKeys(write3af,header);
840 SetupVetoColumns(write3af);
841
842 write3af.SetBytesPerSample("Data", 2);
843
844 write1a.SetName("WriteRefData");
845 write1b.SetName("WriteRefMC");
846 write2a.SetName("WriteSigData");
847 write2b.SetName("WriteSigMC");
848 write3a.SetName("WriteCamData");
849 write3b.SetName("WriteCamMC");
850 write4a.SetName("WriteImgData");
851 write4b.SetName("WriteImgMC");
852
853 SetupCommonFileStructure(write1a);
854 SetupCommonFileStructure(write2a);
855 SetupCommonFileStructure(write3ar);
856 SetupCommonFileStructure(write3af);
857 SetupCommonFileStructure(write4a);
858
859 // R: Dedicated file structure
860 write1a.AddContainer("MPhotonEvent", "Events");
861
862 // Y: Dedicated file structure
863 write2a.AddContainer("MPedPhotFromExtractorRndm", "RunHeaders", kTRUE, 1); // FIXME: Needed for the signal files to be display in MARS
864 write2a.AddContainer("MSignalCam", "Events");
865
866 // D: Dedicated file structure
867 write3af.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
868 write3af.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
869 write3af.AddContainer("ResidualTimeSpread", "RunHeaders", kTRUE, 1);
870 write3af.AddContainer("GapdTimeJitter", "RunHeaders", kTRUE, 1);
871 write3af.AddContainer("MRawEvtData", "Events");
872 write3af.AddContainer("MTruePhotonsPerPixelCont", "Events");
873
874 write3ar.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
875 write3ar.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
876 write3ar.AddContainer("MRawEvtData", "Events");
877 // It doesn't make much sene to write this information
878 // to the file because the units are internal units not
879 // related to the output samples
880 // if (header.IsDataRun() || fForceTrigger)
881 // write3a.AddContainer("TriggerPos", "Events");
882
883 // I: Dedicated file structure
884 write4a.AddContainer("MHillas", "Events");
885 write4a.AddContainer("MHillasSrc", "Events");
886 write4a.AddContainer("MImagePar", "Events");
887 write4a.AddContainer("MNewImagePar", "Events");
888
889 // Basic MC data
890 write1b.AddContainer("MMcEvtBasic", "OriginalMC");
891 write2b.AddContainer("MMcEvtBasic", "OriginalMC");
892 write3b.AddContainer("MMcEvtBasic", "OriginalMC");
893 write4b.AddContainer("MMcEvtBasic", "OriginalMC");
894
895
896 // --------------------------------------------------------------------------------
897 // --------------------------------------------------------------------------------
898 // Filling of tasks in tasklist
899 // --------------------------------------------------------------------------------
900 // --------------------------------------------------------------------------------
901
902 if (header.IsDataRun())
903 {
904 tasks.AddToList(&read); // Reading Corsika
905 tasks.AddToList(&precut); // Precut
906 tasks.AddToList(&pointing); // Simulating pointing
907 tasks.AddToList(&simmmcs); // Simulating MMCS
908 if (!fPathOut.IsNull() && !HasNullOut()) // Write Tasks for corsika infos
909 {
910 //tasks.AddToList(&write1b);
911 tasks.AddToList(&write2b);
912 if (fCamera)
913 tasks.AddToList(&write3b);
914 if (header.IsDataRun())
915 tasks.AddToList(&write4b);
916 }
917 // if (header.IsPointRun())
918 // tasks.AddToList(&stars);
919 if (1)
920 tasks.AddToList(&simatm); // Here because before fillh1 // atmosphere absorption
921 tasks.AddToList(&calcangle); // calculation incident angle
922 tasks.AddToList(&fillh1); // fill histogram task
923 tasks.AddToList(&fillG); // fill histogram task
924 if (!header.IsPointRun())
925 {
926 tasks.AddToList(&absapd); // photon detection efficiency of the apds
927 tasks.AddToList(&absmir); // mirror reflectivity
928 tasks.AddToList(&additionalPhotonAcceptance); // addition photon acceptance
929 if (0)
930 tasks.AddToList(&simatm); // FASTER? // be aware this is 'commented'
931 }
932 tasks.AddToList(&reflect); // Simulation of the reflector
933 if (!header.IsPointRun())
934 {
935 tasks.AddToList(&fill0); // fill histogram task
936 //tasks.AddToList(&fill1);
937 tasks.AddToList(&fill2); // fill histogram task
938 tasks.AddToList(&fill3); // fill histogram task
939 tasks.AddToList(&fill4); // fill histogram task
940 tasks.AddToList(&fillF1); // fill histogram task
941 }
942 tasks.AddToList(&cones); // angular acceptance of winston cones
943 tasks.AddToList(&cones2); // transmission of winston cones
944 //if (header.IsPointRun())
945 // tasks.AddToList(&fillP);
946 tasks.AddToList(&cont1); // continue if at least 2 photons
947 }
948 // -------------------------------
949 tasks.AddToList(&apply); // apply geometry to MGeomCam containers
950 if (header.IsDataRun())
951 {
952 tasks.AddToList(&simpsf); // simulates additional psf (NOT used in default mode)
953 tasks.AddToList(&simgeom); // tag which pixel is hit by which photon
954 tasks.AddToList(&cont2); // continue if at least 2 photons
955 if (!header.IsPointRun())
956 {
957 tasks.AddToList(&fillF2); // fill histogram task
958 tasks.AddToList(&fillh2); // fill histogram task
959 }
960 tasks.AddToList(&cont3); // continue if at least 3 photons
961 }
962 if (fCamera)
963 {
964 if (header.IsPedestalRun() || header.IsCalibrationRun())
965 tasks.AddToList(&simcal); // add calibration signal for calibration runs
966 tasks.AddToList(&simnsb); // simulate nsb and dark counts
967 tasks.AddToList(&simapd); // simulate SiPM behaviour (dead time, crosstalk ...)
968 tasks.AddToList(&simexcnoise); // add excess noise
969 }
970 tasks.AddToList(&simsum); // bundle photons (NOT used in default mode)
971 if (fCamera)
972 {
973 tasks.AddToList(&simcam); // simulate camera behaviour (creates analog signal)
974 if (header.IsDataRun() || fForceTrigger)
975 tasks.AddToList(&simtrig); // simulate trigger
976 tasks.AddToList(&conttrig); // continue if trigger pos is valid
977 tasks.AddToList(&simdaq); // simulate data aquisition
978 }
979 tasks.AddToList(&simsignal); // What do we do if signal<0? // fill MSimSignal container
980 if (!fPathOut.IsNull() && !HasNullOut())
981 {
982 //tasks.AddToList(&write1a);
983 if (!header.IsPedestalRun())
984 tasks.AddToList(&write2a); // outputtask
985 if (fCamera)
986 tasks.AddToList(&write3a); // outputtask (this is the raw data writing tasks)
987 }
988 // -------------------------------
989 if (fCamera)
990 {
991 // FIXME: MHCollectionArea Trigger Area!
992 if (header.IsDataRun())
993 tasks.AddToList(&fillh3); // fill histogram task
994 tasks.AddToList(&filltp); // fill histogram task
995 }
996 if (header.IsDataRun())
997 {
998 tasks.AddToList(&fillew); // fill histogram task
999 tasks.AddToList(&filled); // fill histogram task
1000 }
1001 if (!header.IsPedestalRun())
1002 {
1003 tasks.AddToList(&fillx0a); // fill histogram task
1004 tasks.AddToList(&fillx0c); // fill histogram task
1005 }
1006 if (header.IsDataRun())
1007 {
1008 tasks.AddToList(&clean); // Cleaning for standard analysis
1009 tasks.AddToList(&hcalc); // Hillas parameter calculation
1010 tasks.AddToList(&cut);
1011 tasks.AddToList(&fillx0d); // fill histogram task
1012 tasks.AddToList(&fillx1); // fill histogram task
1013 //tasks.AddToList(&fillx2);
1014 tasks.AddToList(&fillx3); // fill histogram task
1015 tasks.AddToList(&fillx4); // fill histogram task
1016 if (!HasNullOut())
1017 tasks.AddToList(&write4a);
1018 //tasks.AddToList(&fillx5);
1019
1020 tasks.AddToList(&fillh4); // fill histogram task
1021 tasks.AddToList(&fillth); // fill histogram task
1022 tasks.AddToList(&fillca); // fill histogram task
1023 }
1024
1025
1026 // --------------------------------------------------------------------------------
1027 // --------------------------------------------------------------------------------
1028 // Event loop and processing display
1029 // --------------------------------------------------------------------------------
1030 // --------------------------------------------------------------------------------
1031
1032 // --------------------------------------------------------------------------------
1033 // Creation of event loop
1034 // --------------------------------------------------------------------------------
1035 tasks.SetAccelerator(MTask::kAccDontReset|MTask::kAccDontTime);
1036
1037 // Create and setup the eventloop
1038 MEvtLoop evtloop(fName);
1039 evtloop.SetParList(&plist);
1040 evtloop.SetDisplay(fDisplay);
1041 evtloop.SetLogStream(&gLog);
1042 if (!SetupEnv(evtloop))
1043 return kFALSE;
1044
1045 // FIXME: If pedestal file given use the values from this file
1046
1047
1048 // --------------------------------------------------------------------------------
1049 // Preparation of the graphicalk display which is shown while processing
1050 // --------------------------------------------------------------------------------
1051
1052 MGeomCam *cam = static_cast<MGeomCam*>(env2.GetCont());
1053
1054
1055 MBinning *binsd = (MBinning*) plist.FindObject("BinningDistC");
1056 MBinning *binsd0 = (MBinning*) plist.FindObject("BinningDist");
1057 MBinning *binstr = (MBinning*) plist.FindObject("BinningTrigPos");
1058 if (binstr->IsDefault())
1059 binstr->SetEdgesLin(150, -shape.GetWidth(),
1060 header.GetFreqSampling()/1000.*header.GetNumSamples()+shape.GetWidth());
1061
1062 if (binsd->IsDefault() && cam)
1063 binsd->SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
1064
1065 if (binsd0->IsDefault() && cam)
1066 binsd0->SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
1067
1068
1069 header.Print();
1070
1071 // FIXME: Display acceptance curves!
1072
1073 if (fDisplay)
1074 {
1075 TCanvas &c = fDisplay->AddTab("Info");
1076 c.Divide(2,2);
1077
1078 c.cd(1);
1079 gPad->SetBorderMode(0);
1080 gPad->SetFrameBorderMode(0);
1081 gPad->SetGridx();
1082 gPad->SetGridy();
1083 gROOT->SetSelectedPad(0);
1084 shape.DrawClone()->SetBit(kCanDelete);
1085
1086 if (env0.GetCont() && (header.IsDataRun() || header.IsPointRun()))
1087 {
1088 c.cd(3);
1089 gPad->SetBorderMode(0);
1090 gPad->SetFrameBorderMode(0);
1091 gPad->SetGridx();
1092 gPad->SetGridy();
1093 gROOT->SetSelectedPad(0);
1094 static_cast<MReflector*>(env0.GetCont())->DrawClone("line")->SetBit(kCanDelete);
1095 }
1096
1097 if (fCamera)
1098 {
1099 if (env1.GetCont())
1100 {
1101 c.cd(2);
1102 gPad->SetBorderMode(0);
1103 gPad->SetFrameBorderMode(0);
1104 gPad->SetGridx();
1105 gPad->SetGridy();
1106 gROOT->SetSelectedPad(0);
1107 MHCamera *c = new MHCamera(static_cast<MGeomCam&>(*env1.GetCont()));
1108 c->SetStats(kFALSE);
1109 c->SetBit(MHCamera::kNoLegend);
1110 c->SetBit(kCanDelete);
1111 c->Draw();
1112 }
1113
1114 if (cam)
1115 {
1116 c.cd(4);
1117 gPad->SetBorderMode(0);
1118 gPad->SetFrameBorderMode(0);
1119 gPad->SetGridx();
1120 gPad->SetGridy();
1121 gROOT->SetSelectedPad(0);
1122 MHCamera *c = new MHCamera(*cam);
1123 c->SetStats(kFALSE);
1124 c->SetBit(MHCamera::kNoLegend);
1125 c->SetBit(kCanDelete);
1126 c->Draw();
1127 }
1128 }
1129
1130 TCanvas &d = fDisplay->AddTab("Info2");
1131 d.Divide(2,3);
1132
1133 d.cd(1);
1134 gPad->SetBorderMode(0);
1135 gPad->SetFrameBorderMode(0);
1136 gPad->SetGridx();
1137 gPad->SetGridy();
1138 gROOT->SetSelectedPad(0);
1139 splinepde.DrawClone()->SetBit(kCanDelete);
1140
1141 d.cd(3);
1142 gPad->SetBorderMode(0);
1143 gPad->SetFrameBorderMode(0);
1144 gPad->SetGridx();
1145 gPad->SetGridy();
1146 gROOT->SetSelectedPad(0);
1147 splinecones2.DrawClone()->SetBit(kCanDelete);
1148
1149 d.cd(5);
1150 gPad->SetBorderMode(0);
1151 gPad->SetFrameBorderMode(0);
1152 gPad->SetGridx();
1153 gPad->SetGridy();
1154 gROOT->SetSelectedPad(0);
1155 splinemirror.DrawClone()->SetBit(kCanDelete);
1156
1157 d.cd(2);
1158 gPad->SetBorderMode(0);
1159 gPad->SetFrameBorderMode(0);
1160 gPad->SetGridx();
1161 gPad->SetGridy();
1162 gROOT->SetSelectedPad(0);
1163 splinecones.DrawClone()->SetBit(kCanDelete);
1164 //splinecones2.DrawClone("same")->SetBit(kCanDelete);
1165
1166 d.cd(6);
1167 gPad->SetBorderMode(0);
1168 gPad->SetFrameBorderMode(0);
1169 gPad->SetGridx();
1170 gPad->SetGridy();
1171 gROOT->SetSelectedPad(0);
1172 MParSpline *all = (MParSpline*)splinepde.DrawClone();
1173 //all->SetTitle("Combined acceptance");
1174 all->SetBit(kCanDelete);
1175 if (splinemirror.GetSpline())
1176 all->Multiply(*splinemirror.GetSpline());
1177 if (splinecones2.GetSpline())
1178 all->Multiply(*splinecones2.GetSpline());
1179 }
1180
1181 // --------------------------------------------------------------------------------
1182 // Perform event loop
1183 // --------------------------------------------------------------------------------
1184
1185 // Execute first analysis
1186 if (!evtloop.Eventloop(fMaxEvents))
1187 {
1188 gLog << err << GetDescriptor() << ": Failed." << endl;
1189 return kFALSE;
1190 }
1191
1192 //-------------------------------------------
1193 // FIXME: Display Spline in tab
1194 // FIXME: Display Reflector in tab
1195 // FIXME: Display Routing(?) in tab
1196 // FIXME: Display Camera(s) in tab
1197 //-------------------------------------------
1198
1199 if (!WriteResult(plist, seq, header.GetRunNumber()))
1200 return kFALSE;
1201
1202 *fLog << all << GetDescriptor() << ": Done." << endl << endl << endl;;
1203
1204 return kTRUE;
1205}
Note: See TracBrowser for help on using the repository browser.