source: branches/Mars_McMismatchStudy/fact/analysis/mc/callisto.C.GOOD@ 18066

Last change on this file since 18066 was 17962, checked in by dneise, 10 years ago
these modifications I found in the Mars.svn.2014.05.26 folder of Simona and added them to this branch without further thinking about them.
File size: 22.4 KB
Line 
1#include <sstream>
2#include <iostream>
3
4#include "MLog.h"
5#include "MLogManip.h"
6
7#if !defined(__CINT__) || defined(__MAKECINT__)
8
9#include "TH1F.h"
10#include "TFile.h"
11#include "TStyle.h"
12#include "TGraph.h"
13#include "TLine.h"
14
15#include "../mcore/DrsCalib.h"
16#include "MDrsCalibration.h"
17#include "MExtralgoSpline.h"
18#include "MSequence.h"
19#include "MStatusArray.h"
20#include "MHCamera.h"
21#include "MJob.h"
22#include "MWriteRootFile.h"
23#include "MHCamera.h"
24#include "MBadPixelsCam.h"
25#include "MBadPixelsPix.h"
26#include "MDirIter.h"
27#include "MTaskList.h"
28#include "MFDataPhrase.h"
29#include "MArrayF.h"
30#include "MBadPixelsTreat.h"
31#include "MCalibrateDrsTimes.h"
32#include "MHSectorVsTime.h"
33#include "MHCamEvent.h"
34#include "MExtractTimeAndChargeSpline.h"
35#include "MFillH.h"
36#include "MDrsCalibApply.h"
37#include "MGeomApply.h"
38#include "MContinue.h"
39#include "MRawFitsRead.h"
40#include "MReadMarsFile.h"
41#include "MEvtLoop.h"
42#include "MParList.h"
43#include "MStatusDisplay.h"
44#include "MDrsCalibrationTime.h"
45#include "MH3.h"
46#include "MGeomCamFACT.h"
47#include "MCalibrateFact.h"
48#include "MParameters.h"
49#include "MWriteAsciiFile.h"
50
51#endif
52
53using namespace std;
54
55/* Maybe you wanna use this macro like this:
56 *
57 * 0.) ---- call root ----
58 * root -b
59 *
60 * 1.) ---- compile the stuff ----
61 * .L fact/analysis/callisto_buildable_no_sequence_file.C++
62 * <read a lot of warnings>
63 *
64 * 2.) ---- you can call it then ----
65 * Therefore you need to specify all the paths ... see below.
66 *
67 * When you wanna call the stuff directly from the bash make sure to
68 * escape the bracets and quotes correctly.
69 *
70 * your can do:
71 * root -b -q callisto_buildable_no_sequence_file.C++'("path1","path2",...)'
72 * or:
73 * root -b -q callisto_buildable_no_sequence_file.C++(\"path1\",\"$HOME\",...)
74 * using bash enviroment variables like $HOME is not possible in the upper variant.
75 */
76
77int callisto(const TString drsfile="test300samples2.drs.fits.gz",
78 const TString pedfile="00000001.001_P_MonteCarlo000_Events.fits",
79 const TString datfile="00000003.387_D_MonteCarlo010_Events.fits",
80 TString outpath = "",
81 TString displayfile = "", TString displaytitle = "")
82{
83
84 // ======================================================
85
86 if (displaytitle.IsNull())
87 displaytitle = gSystem->BaseName(datfile);
88
89 FileStat_t fstat;
90 int rc = gSystem->GetPathInfo(outpath, fstat);
91 bool isdir = !rc || R_ISDIR(fstat.fMode);
92
93 TString filename = datfile + "_callisto.root";
94 filename.Replace(0, filename.Last('/')+1, "");
95 const char *buf = gSystem->ConcatFileName(outpath, filename);
96 TString outfile = buf;
97 delete [] buf;
98
99 if (displayfile.IsNull())
100 {
101 displayfile = outfile;
102 displayfile.Insert(displayfile.Last('.'), "-display");
103 }
104 else
105 {
106 if (isdir && gSystem->DirName(displayfile)==TString("."))
107 {
108 buf = gSystem->ConcatFileName(outfile, displayfile);
109 displayfile = buf;
110 delete [] buf;
111 }
112 }
113
114 // ======================================================
115
116 // true: Display correctly mapped pixels in the camera displays
117 // but the value-vs-index plot is in software/spiral indices
118 // false: Display pixels in hardware/linear indices,
119 // but the order is the camera display is distorted
120 bool usemap = true;
121
122 // map file to use (get that from La Palma!)
123 const char *pmap = usemap ? "/home/isdc/toscanos/FACT/Mars_svn/resources/FACTmap111030.txt" : NULL;
124
125 Bool_t maximum = kTRUE;
126
127 //const char *lp_template = maximum ?
128 // "/cm/shared/apps/fact/Mars_svn_LP/template-lp-extractor-maximum.root" :
129 // "/cm/shared/apps/fact/Mars_svn_LP/template-lp-extractor-leading-edge.root";
130
131 // const char *lp_template = "/home/isdc/toscanos/FACT/Mars_svn/resources/template-lp.root";
132
133 //const char *pulse_template = "/cm/shared/apps/fact/Mars_svn_LP/template-pulse.root";
134
135 const char *pulse_template = "/home/isdc/toscanos/FACT/Mars_svn/resources/template-pulse.root";
136
137 // ------------------------------------------------------
138
139 // Calib: 51 / 90 / 197 (20% TH)
140 // Data: 52 / 64 / 104 (20% TH)
141
142 // Extraction range in slices. It will always(!) contain the full range
143 // of integration
144 const int first_slice = 20; // 10ns
145 const int last_slice = 250; // 125ns
146
147 // Note that rise and fall time mean different things whether you use IntegralFixed or IntegraRel:
148 //
149 // IntegralFixed:
150 // * fRiseTime: Number of slices left from arrival time
151 // * fFallTime: Number of slices right from arrival time
152 // IntegralRel:
153 // * fRiseTime: Number of slices left from maximum time
154 // * fFallTime: Number of slices right from maximum time
155 //
156 const int rise_time_cal = maximum ? 40 : 10; // was 13; 5ns
157 const int fall_time_cal = maximum ? 120 : 160; // was 23; 80ns
158
159 const int rise_time_dat = maximum ? 10 : 2; // was 13; was 10; 1ns
160 const int fall_time_dat = maximum ? 40 : 48; // was 23; was 40; 24ns
161
162 // Extraction type: Extract integral and half leading edge
163
164 const MExtralgoSpline::ExtractionType_t type = maximum ? (MExtralgoSpline::kIntegralRel) : (MExtralgoSpline::kIntegralFixed);
165 //const int type = MExtralgoSpline::kIntegralFixed;
166
167
168 const double heighttm = 0.5; // IntegralAbs { 1.5pe * 9.6mV/pe } / IntegralRel { 0.5 }
169
170 Long_t max = 0; // All
171 Long_t max3 = max; // Pedestal Rndm
172 Long_t max4 = max; // Pedestal Ext
173
174 // ======================================================
175
176 if (pmap && gSystem->AccessPathName(pmap, kFileExists))
177 {
178 gLog << err << "ERROR - Cannot access mapping file '" << pmap << "'" << endl;
179 return 1;
180 }
181
182 gLog.Separator("Callisto");
183 gLog << all;
184 gLog << "Data File: " << datfile << '\n';
185 gLog << "DRS calib 300: " << drsfile << endl;;
186
187 MDrsCalibration drscalib300;
188 if (!drscalib300.ReadFits(drsfile.Data())) {
189 gLog << err << "ERROR - Cannot access drscallib300 file '" << drsfile << "'" << endl;
190 return 5;
191 }
192 gLog << all;
193 gLog << "Pedestal file: " << pedfile << '\n';
194 gLog << "Output file: " << outfile << '\n';
195 gLog << "Display file: " << displayfile << '\n';
196 gLog << "Display title: " << displaytitle << endl;
197
198 // ------------------------------------------------------
199 MStatusArray arrt, arrp;
200
201 // TFile ft(lp_template);
202 // if (arrt.Read()<=0)
203 // {
204 // gLog << err << "ERROR - Reading LP template from " << lp_template << endl;
205 // return 100;
206 // }
207
208 // MHCamera *lpref = (MHCamera*)arrt.FindObjectInCanvas("ExtCalSig;avg", "MHCamera", "Cam");
209 // if (!lpref)
210 // {
211 // gLog << err << "ERROR - LP Template not found in " << lp_template << endl;
212 // return 101;
213 // }
214 // lpref->SetDirectory(0);
215
216 // MHCamera *gain = (MHCamera*)arrt.FindObjectInCanvas("gain", "MHCamera", "Gain");
217 // if (!gain)
218 // {
219 // gLog << err << "ERROR - Gain not found in " << lp_template << endl;
220 // return 101;
221 // }
222 // gain->SetDirectory(0);
223
224 TFile fp(pulse_template);
225 if (arrp.Read()<=0)
226 {
227 gLog << err << "ERROR - Reading Pulse template from " << pulse_template << endl;
228 return 102;
229 }
230
231 TH1F *hpulse = (TH1F*)arrp.FindObjectInCanvas("hPixelEdgeMean0_0", "TH1F", "cgpPixelPulses0");
232 if (!hpulse)
233 {
234 gLog << err << "ERROR - Pulse Template not found in " << pulse_template << endl;
235 return 103;
236 }
237 hpulse->SetDirectory(0);
238 // ======================================================
239
240 MStatusDisplay *d = new MStatusDisplay;
241
242 MBadPixelsCam badpixels;
243 badpixels.InitSize(1440);
244 /*
245 badpixels[ 424].SetUnsuitable(MBadPixelsPix::kUnsuitable);
246 badpixels[ 583].SetUnsuitable(MBadPixelsPix::kUnsuitable);
247 badpixels[ 830].SetUnsuitable(MBadPixelsPix::kUnsuitable);
248 badpixels[ 923].SetUnsuitable(MBadPixelsPix::kUnsuitable);
249 badpixels[1208].SetUnsuitable(MBadPixelsPix::kUnsuitable);
250 badpixels[1399].SetUnsuitable(MBadPixelsPix::kUnsuitable);
251 */
252 // Twin pixel
253 // 113
254 // 115
255 // 354
256 // 423
257 // 1195
258 // 1393
259
260 MDrsCalibrationTime timecam;
261
262 // Plot the trigger pattern rates vs. run-number
263 MH3 hrate("MRawRunHeader.GetFileID", "MRawEvtHeader.GetTriggerID&0xff00");
264 hrate.SetWeight("1./TMath::Max(MRawRunHeader.GetRunLength,1)");
265 hrate.SetName("Rate");
266 hrate.SetTitle("Event rate [Hz];File Id;Trigger Type;");
267 hrate.InitLabels(MH3::kLabelsXY);
268 hrate.DefineLabelY( 0, "Data"); // What if TriggerID==0 already???
269 hrate.DefineLabelY(0x100, "Cal");
270 hrate.DefineLabelY(0x400, "Ped");
271 // hrate.DefaultLabelY("ERROR");
272 gStyle->SetOptFit(kTRUE);
273
274
275 // ========================= Result ==================================
276
277 //~ Double_t avgS = evt1f.GetHist()->GetMean();
278 //~ Double_t medS = evt1f.GetHist()->GetMedian();
279 //~ Double_t rmsS = evt1f.GetHist()->GetRMS();
280 //~ Double_t maxS = evt1f.GetHist()->GetMaximum();
281
282 MArrayF der1(hpulse->GetNbinsX());
283 MArrayF der2(hpulse->GetNbinsX());
284
285 MExtralgoSpline spline(hpulse->GetArray()+1, hpulse->GetNbinsX(),
286 der1.GetArray(), der2.GetArray());
287 spline.SetRiseFallTime(rise_time_dat, fall_time_dat);
288 spline.SetExtractionType(type);
289 spline.SetHeightTm(heighttm);
290
291 spline.Extract(hpulse->GetMaximumBin()-1);
292
293 // The pulser signal is most probably around 400mV/9.5mV
294 // IntegraFixed 2/48 corresponds to roughly 215mV*50slices
295 Double_t scale = 1./spline.GetSignal();
296
297 MArrayD calib(1440);
298 for (int i=0; i<1440; i++)
299 calib[i] =1.;
300
301 gROOT->SetSelectedPad(0);
302 d->AddTab("PulseTemp");
303 gPad->SetGrid();
304 hpulse->SetNameTitle("Pulse", "Single p.e. pulse template");
305 hpulse->SetDirectory(0);
306 hpulse->SetLineColor(kBlack);
307 hpulse->DrawCopy();
308
309 TAxis *ax = hpulse->GetXaxis();
310
311 Double_t w = hpulse->GetBinWidth(1);
312 Double_t T = w*(spline.GetTime()+0.5) +ax->GetXmin();
313 //~ Double_t H = w*(hpulse->GetMaximumBin()+0.5)+ax->GetXmin();
314
315 TLine line;
316 line.SetLineColor(kRed);
317 line.DrawLine(T-rise_time_dat*w, spline.GetHeight(),
318 T+fall_time_dat*w, spline.GetHeight());
319 line.DrawLine(T, spline.GetHeight()/4, T, 3*spline.GetHeight()/4);
320 line.DrawLine(T-rise_time_dat*w, 0,
321 T-rise_time_dat*w, spline.GetHeight());
322 line.DrawLine(T+fall_time_dat*w, 0,
323 T+fall_time_dat*w, spline.GetHeight());
324
325 TGraph gg;
326 for (int ix=1; ix<=hpulse->GetNbinsX(); ix++)
327 for (int i=0; i<10; i++)
328 {
329 Double_t x = hpulse->GetBinLowEdge(ix)+i*hpulse->GetBinWidth(ix)/10.;
330 gg.SetPoint(gg.GetN(), x+w/2, spline.EvalAt(ix-1+i/10.));
331 }
332
333 gg.SetLineColor(kBlue);
334 gg.SetMarkerColor(kBlue);
335 gg.SetMarkerStyle(kFullDotMedium);
336 gg.DrawClone("L");
337
338 gROOT->SetSelectedPad(0);
339 d->AddTab("CalConst");
340 MGeomCamFACT fact;
341 MHCamera hcalco(fact);
342 hcalco.SetName("CalConst");
343 hcalco.SetTitle(Form("Relative calibration constant [%.0f/pe]", 1./scale));
344 hcalco.SetCamContent(calib);
345 hcalco.SetAllUsed();
346 //hcalco.Scale(scale);
347 hcalco.DrawCopy();
348
349 // ======================================================
350
351 gLog << endl;
352 gLog.Separator("Extracting random pedestal");
353
354 MTaskList tlist3;
355
356 MParList plist3;
357 plist3.AddToList(&tlist3);
358 plist3.AddToList(&drscalib300);
359 plist3.AddToList(&badpixels);
360 plist3.AddToList(&timecam);
361
362 MEvtLoop loop3("DetermineRndmPed");
363 loop3.SetDisplay(d);
364 loop3.SetParList(&plist3);
365
366 // ------------------ Setup the tasks ---------------
367
368 MRawFitsRead read3;
369 read3.LoadMap(pmap);
370 read3.AddFile(pedfile);
371
372 MFillH fill3a(&hrate);
373
374 MContinue cont3("(MRawEvtHeader.GetTriggerID&0xff00)!=0x400", "SelectPed");
375
376 MGeomApply apply3;
377
378 MDrsCalibApply drsapply3;
379
380 //MFilterData filterdata5;
381
382 //---
383
384 MExtractTimeAndChargeSpline extractor3;
385 extractor3.SetRange(first_slice, last_slice);
386 extractor3.SetRiseTimeHiGain(rise_time_dat);
387 extractor3.SetFallTimeHiGain(fall_time_dat);
388 extractor3.SetHeightTm(heighttm);
389 extractor3.SetChargeType(type);
390 extractor3.SetSaturationLimit(600000);
391 extractor3.SetNoiseCalculation(kTRUE);
392
393// MHCamEvent evt2a(0, "PedRdm", "Extracted Pedestal Signal;;S");
394
395// MFillH fill2a(&evt2a, "MExtractedSignalCam", "FillPedRndm");
396
397 // Use this for data, but not for calibration events
398// evt2a.SetErrorSpread(kFALSE);
399
400 /*
401 MCalibrateData conv3;
402 conv3.SetCalibrationMode(MCalibrateData::kNone);
403 conv3.SetPedestalFlag(MCalibrateData::kNo);
404 conv3.SetCalibConvMinLimit(0);
405 conv3.SetCalibConvMaxLimit(10000);
406 conv3.SetScaleFactor(scale);
407 */
408
409 MCalibrateFact conv3;
410 conv3.SetScale(scale);
411 conv3.SetCalibConst(calib);
412
413 MBadPixelsTreat treat3;
414 treat3.SetProcessPedestalRun(kFALSE);
415 treat3.SetProcessPedestalEvt(kFALSE);
416 treat3.SetProcessTimes(kFALSE);
417
418 MHCamEvent evt3b(0, "PedRdm","Interpolated random pedestal;;Signal [~phe]");
419 //evt2b.SetErrorSpread(kFALSE);
420
421 MFillH fill3b(&evt3b, "MSignalCam", "FillPedRdm");
422 fill3b.SetDrawOption("gaus");
423
424 // ------------------ Setup eventloop and run analysis ---------------
425
426 tlist3.AddToList(&read3);
427 tlist3.AddToList(&apply3);
428 tlist3.AddToList(&drsapply3);
429 tlist3.AddToList(&cont3);
430 tlist3.AddToList(&extractor3);
431// tlist3.AddToList(&fill3a);
432 tlist3.AddToList(&conv3);
433 tlist3.AddToList(&treat3);
434 tlist3.AddToList(&fill3b);
435
436 if (!loop3.Eventloop(max3))
437 return 14;
438
439 if (!loop3.GetDisplay())
440 return 15;
441
442 // ======================================================
443
444 gLog << endl;
445 gLog.Separator("Extracting pedestal");
446
447 MTaskList tlist4;
448
449 MParList plist4;
450 plist4.AddToList(&tlist4);
451 plist4.AddToList(&drscalib300);
452 plist4.AddToList(&badpixels);
453 plist4.AddToList(&timecam);
454
455 MEvtLoop loop4("DetermineExtractedPed");
456 loop4.SetDisplay(d);
457 loop4.SetParList(&plist4);
458
459 // ------------------ Setup the tasks ---------------
460
461 MRawFitsRead read4;
462 read4.LoadMap(pmap);
463 read4.AddFile(pedfile);
464
465 MContinue cont4("(MRawEvtHeader.GetTriggerID&0xff00)!=0x400", "SelectPed");
466
467 MGeomApply apply4;
468
469 MDrsCalibApply drsapply4;
470
471 MExtractTimeAndChargeSpline extractor4;
472 extractor4.SetRange(first_slice, last_slice);
473 extractor4.SetRiseTimeHiGain(rise_time_dat);
474 extractor4.SetFallTimeHiGain(fall_time_dat);
475 extractor4.SetHeightTm(heighttm);
476 extractor4.SetChargeType(type);
477 extractor4.SetSaturationLimit(600000);
478 extractor4.SetNoiseCalculation(kFALSE);
479
480 // MHCamEvent evt3a(0, "PedExt", "Extracted Pedestal Signal;;S");
481
482 // MFillH fill3a(&evt3a, "MExtractedSignalCam", "FillPedExt");
483
484 // Use this for data, but not for calibration events
485// evt3a.SetErrorSpread(kFALSE);
486/*
487 MCalibrateData conv4;
488 conv4.SetCalibrationMode(MCalibrateData::kNone);
489 conv4.SetPedestalFlag(MCalibrateData::kNo);
490 conv4.SetCalibConvMinLimit(0);
491 conv4.SetCalibConvMaxLimit(10000);
492 conv4.SetScaleFactor(scale);
493*/
494 MCalibrateFact conv4;
495 conv4.SetScale(scale);
496 conv4.SetCalibConst(calib);
497
498 MBadPixelsTreat treat4;
499 treat4.SetProcessPedestalRun(kFALSE);
500 treat4.SetProcessPedestalEvt(kFALSE);
501
502 MHCamEvent evt4b(0, "PedExt","Interpolated extracted pedestal;;Signal [~phe]");
503 //evt4b.SetErrorSpread(kFALSE);
504
505 MFillH fill4b(&evt4b, "MSignalCam", "FillPedExt");
506 fill4b.SetDrawOption("gaus");
507
508 // ------------------ Setup eventloop and run analysis ---------------
509
510 tlist4.AddToList(&read4);
511 tlist4.AddToList(&apply4);
512 tlist4.AddToList(&drsapply4);
513 tlist4.AddToList(&cont4);
514 tlist4.AddToList(&extractor4);
515// tlist4.AddToList(&fill4a);
516 tlist4.AddToList(&conv4);
517 tlist4.AddToList(&treat4);
518 tlist4.AddToList(&fill4b);
519
520 if (!loop4.Eventloop(max4))
521 return 15;
522
523 if (!loop4.GetDisplay())
524 return 16;
525
526 // ===================================================================
527
528 gLog << endl;
529 gLog.Separator("Extracting and calibration data");
530
531 MTaskList tlist5;
532
533 MParList plist5;
534 plist5.AddToList(&tlist5);
535 plist5.AddToList(&drscalib300);
536 plist5.AddToList(&badpixels);
537 plist5.AddToList(&timecam);
538
539 MEvtLoop loop5("CalibratingData");
540 loop5.SetDisplay(d);
541 loop5.SetParList(&plist5);
542
543 // ------------------ Setup the tasks ---------------
544
545 MRawFitsRead read5a;
546 MReadMarsFile read5b("Events");
547 read5a.LoadMap(pmap);
548 read5a.AddFile(datfile);
549 read5b.DisableAutoScheme();
550 read5b.AddFile(datfile);
551
552 MRead &read5 = datfile.EndsWith(".root") ? static_cast<MRead&>(read5b) : static_cast<MRead&>(read5a);
553
554 MFillH fill5a(&hrate);
555
556 MGeomApply apply5;
557
558 MDrsCalibApply drsapply5;
559
560 MTreatSaturation treatsat5;
561
562 MFDataPhrase filterdat("(MRawEvtHeader.GetTriggerID&0xff00)==0", "SelectDat");
563 MFDataPhrase filtercal("(MRawEvtHeader.GetTriggerID&0xff00)==0x100", "SelectCal");
564 MFDataPhrase filterped("(MRawEvtHeader.GetTriggerID&0xff00)==0x400", "SelectPed");
565 MFDataPhrase filterncl("(MRawEvtHeader.GetTriggerID&0xff00)!=0x100", "SelectNonCal");
566
567 //MContinue cont4("MRawEvtHeader.GetTriggerID!=4", "SelectData");
568
569 // ---
570
571 MExtractTimeAndChargeSpline extractor5dat;
572 extractor5dat.SetRange(first_slice, last_slice);
573 extractor5dat.SetRiseTimeHiGain(rise_time_dat);
574 extractor5dat.SetFallTimeHiGain(fall_time_dat);
575 extractor5dat.SetHeightTm(heighttm);
576 extractor5dat.SetChargeType(type);
577 extractor5dat.SetSaturationLimit(600000);
578 extractor5dat.SetNoiseCalculation(kFALSE);
579
580 MExtractTimeAndChargeSpline extractor5cal;
581 extractor5cal.SetRange(first_slice, last_slice);
582 extractor5cal.SetRiseTimeHiGain(rise_time_cal);
583 extractor5cal.SetFallTimeHiGain(fall_time_cal);
584 extractor5cal.SetHeightTm(heighttm);
585 extractor5cal.SetChargeType(type);
586 extractor5cal.SetSaturationLimit(600000);
587 extractor5cal.SetNoiseCalculation(kFALSE);
588
589 MExtractTimeAndChargeSpline extractor5tm("ExtractTM");
590 extractor5tm.SetRange(last_slice, 294);
591 extractor5tm.SetRiseTimeHiGain(1);
592 extractor5tm.SetFallTimeHiGain(1);
593 extractor5tm.SetHeightTm(0.5);
594 extractor5tm.SetChargeType(MExtralgoSpline::kAmplitudeRel);
595 extractor5tm.SetSaturationLimit(600000);
596 extractor5tm.SetNoiseCalculation(kFALSE);
597 extractor5tm.SetNameSignalCam("TimeMarkerAmplitude");
598 extractor5tm.SetNameTimeCam("TimeMarkerTime");
599
600 extractor5dat.SetFilter(&filterncl);
601 extractor5cal.SetFilter(&filtercal);
602 //extractor4tm.SetFilter(&filtercal);
603
604 // ---
605/*
606 MCalibrateData conv5;
607 conv5.SetCalibrationMode(MCalibrateData::kNone);
608 conv5.SetPedestalFlag(MCalibrateData::kNo);
609 conv5.SetCalibConvMinLimit(0);
610 conv5.SetCalibConvMaxLimit(10000);
611 conv5.SetScaleFactor(scale);
612*/
613 MCalibrateFact conv5;
614 conv5.SetScale(scale);
615 conv5.SetCalibConst(calib);
616
617 MCalibrateDrsTimes calctm5;
618 calctm5.SetNameUncalibrated("UncalibratedTimes");
619
620 MCalibrateDrsTimes calctm5tm("CalibrateTimeMarker");
621 calctm5tm.SetNameArrivalTime("TimeMarkerTime");
622 calctm5tm.SetNameUncalibrated("UncalTimeMarker");
623 calctm5tm.SetNameCalibrated("TimeMarker");
624 calctm5tm.SetTimeMarker();
625 //calctm4tm.SetFilter(&filtercal);
626
627 MBadPixelsTreat treat5;
628 treat5.SetProcessPedestalRun(kFALSE);
629 treat5.SetProcessPedestalEvt(kFALSE);
630
631 MHCamEvent evt5b(0, "ExtSig", "Extracted signal;;S [mV·sl]");
632 MHCamEvent evt5c(0, "CalSig", "Calibrated and interpolated signal;;S [~phe]");
633 MHCamEvent evt5d(4, "ExtSigTm", "Extracted time;;T [sl]");
634 MHCamEvent evt5e(6, "CalSigTm", "Calibrated and interpolated time;;T [ns]");
635
636 MFillH fill5b(&evt5b, "MExtractedSignalCam", "FillExtSig");
637 MFillH fill5c(&evt5c, "MSignalCam", "FillCalSig");
638 MFillH fill5d(&evt5d, "MArrivalTimeCam", "FillExtTm");
639 MFillH fill5e(&evt5e, "MSignalCam", "FillCalTm");
640
641 fill5c.SetDrawOption("gaus");
642 fill5d.SetDrawOption("gaus");
643 fill5e.SetDrawOption("gaus");
644
645 /*
646 fill4b.SetFilter(&filterdat);
647 fill4c.SetFilter(&filterdat);
648 fill4d.SetFilter(&filterdat);
649 fill4e.SetFilter(&filterdat);
650 */
651
652 //MFSoftwareTrigger swtrig;
653 //MContinue contsw(&swtrig, "FilterSwTrigger", "Software trigger");
654 //contsw.SetInverted();
655
656 // The second rule is for the case reading raw-files!
657
658 MWriteRootFile write5(outfile, "RECREATE", "Calibrated Data", 2);
659 write5.AddContainer("MRawRunHeader", "RunHeaders");
660 write5.AddContainer("MGeomCam", "RunHeaders");
661 write5.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE);
662 write5.AddContainer("MCorsikaRunHeader", "RunHeaders", kFALSE);
663 write5.AddContainer("MMcRunHeader", "RunHeaders", kFALSE);
664
665 // Common events
666 write5.AddContainer("MCorsikaEvtHeader", "Events", kFALSE);
667 write5.AddContainer("MMcEvt", "Events", kFALSE);
668 write5.AddContainer("IncidentAngle", "Events", kFALSE);
669 write5.AddContainer("MPointingPos", "Events", kFALSE);
670 write5.AddContainer("MSignalCam", "Events");
671 write5.AddContainer("MTime", "Events", kFALSE);
672 write5.AddContainer("MRawEvtHeader", "Events");
673 //write.AddContainer("MTriggerPattern", "Events");
674
675 // ------------------ Setup histograms and fill tasks ----------------
676
677 MContinue test;
678 test.SetFilter(&filterncl);
679
680 MTaskList tlist5tm;
681 tlist5tm.AddToList(&extractor5tm);
682 tlist5tm.AddToList(&calctm5tm);
683 tlist5tm.SetFilter(&filtercal);
684
685 MTaskList tlist5dat;
686 tlist5dat.AddToList(&fill5b);
687 tlist5dat.AddToList(&fill5c);
688 tlist5dat.AddToList(&fill5d);
689 tlist5dat.AddToList(&fill5e);
690 tlist5dat.SetFilter(&filterdat);
691
692 tlist5.AddToList(&read5);
693 tlist5.AddToList(&apply5);
694 tlist5.AddToList(&drsapply5);
695 tlist5.AddToList(&treatsat5);
696 tlist5.AddToList(&filterncl);
697 //tlist5.AddToList(&test);
698 tlist5.AddToList(&filterdat);
699 tlist5.AddToList(&filtercal);
700 tlist5.AddToList(&filterped);
701 tlist5.AddToList(&fill5a);
702 tlist5.AddToList(&extractor5dat);
703 tlist5.AddToList(&extractor5cal);
704 tlist5.AddToList(&calctm5);
705 tlist5.AddToList(&tlist5tm);
706 tlist5.AddToList(&conv5);
707 tlist5.AddToList(&treat5);
708 tlist5.AddToList(&tlist5dat);
709 tlist5.AddToList(&write5);
710
711 if (!loop5.Eventloop(max4))
712 return 18;
713
714 if (!loop5.GetDisplay())
715 return 19;
716
717 d->SetTitle(displaytitle, kFALSE);
718 d->SaveAs(displayfile);
719
720 return 0;
721}
Note: See TracBrowser for help on using the repository browser.