|
Last change
on this file since 18795 was 14285, checked in by Jens Buss, 12 years ago |
|
put the drive system status check in to the separate script
|
|
File size:
1.5 KB
|
| Line | |
|---|
| 1 | #!dimctrl --exec
|
|---|
| 2 |
|
|---|
| 3 | # ==========================================================================
|
|---|
| 4 | # Amplitude vs. Voltage Offset Measurement
|
|---|
| 5 |
|
|---|
| 6 | # ==========================================================================
|
|---|
| 7 | # Script for Amplitude vs. Voltage Offset Measurement
|
|---|
| 8 |
|
|---|
| 9 | # call it by: .x ScriptsForDimCtrl/AmplVsOv.dim V=<voltage_offset_value>
|
|---|
| 10 |
|
|---|
| 11 | # ----------------------------------------------------
|
|---|
| 12 |
|
|---|
| 13 |
|
|---|
| 14 | > changing feedback voltage offset to ${V}
|
|---|
| 15 |
|
|---|
| 16 | FEEDBACK/STOP # STOP FEEDBACK
|
|---|
| 17 | .w 1000 # wait 1 second
|
|---|
| 18 |
|
|---|
| 19 | FEEDBACK/START_CURRENT_CONTROL ${V} # set Current_Control to given Offset value
|
|---|
| 20 |
|
|---|
| 21 | > ...checking if Voltage is ON
|
|---|
| 22 | # will ramp if not at nominal, will skip ramping if Voltage on
|
|---|
| 23 | .s BIAS_CONTROL 7 3000 1
|
|---|
| 24 | > Voltage is OFF, will ramp to nominal Voltage
|
|---|
| 25 | BIAS_CONTROL/SET_GLOBAL_DAC 1
|
|---|
| 26 | .s BIAS_CONTROL 9
|
|---|
| 27 | .s BIAS_CONTROL 5
|
|---|
| 28 | > ...ramping
|
|---|
| 29 | .s BIAS_CONTROL 9
|
|---|
| 30 |
|
|---|
| 31 | :1
|
|---|
| 32 | > Voltage is ON, waiting 45 sec for current_control to stabilize
|
|---|
| 33 | .w 42000 # wait 30 second for the current updates
|
|---|
| 34 |
|
|---|
| 35 | > OPERATOR: Write down: V_offset ${V}, Med(V), Med(I) and the Run number to the Excel file
|
|---|
| 36 |
|
|---|
| 37 | > starting LPext with 1000 Events # start external Lightpulser Run with 1000 Events
|
|---|
| 38 | # take a ExtLP run
|
|---|
| 39 | .x ScriptsForDimCtrl/ServiceScripts/IsTracking.dim
|
|---|
| 40 | .x ScriptsForDimCtrl/ServiceScripts/TakeExtLpRun.dim
|
|---|
| 41 |
|
|---|
| 42 | FEEDBACK/STOP # STOP FEEDBACK
|
|---|
| 43 | > ...Feedback stopped
|
|---|
| 44 | >
|
|---|
| 45 | > OPERATOR: make sure to restart the feedback with the correct offset when resuming data taking
|
|---|
| 46 | >
|
|---|
| 47 | > ...done
|
|---|
Note:
See
TracBrowser
for help on using the repository browser.
