# Configuration data for the Evidence Control System
#
# The first entry of each line gives the requester for the parameter in
# the second entry. The remaining text of the line is send in reponse
# to the configuration request.
# A plus sign before the line break signals continuation of the line.


#
# Sky Quality Monitor
#

SQM address	sqm.ethz.ch
SQM port	10001
SQM period	20

#
# Central Data Collector
#

# Minumum absolute change to include in history buffer. Standard regular
# expressions are supported. Negative value means do not to disk.

DColl minchange	SQM/NSB:0.2 Alarm/MasterAlarm:-1 Alarm/Summary:-1 +
		BIAS/VOLT/ID00/*-*:0.01 BIAS/Textout:-1 +
		ARDUINO/VAL*:0.2 ARDUINO/VAL0[79]:0.5 

DColl datadir		../../../no_back/EvidenceData
DColl logfile		../../../no_back/EvidenceData/Evidence.log
DColl sizeupdate	30	# Min delay in seconds between file size updates

DColl histsize	5000	# Number of items in history buffer


#
# Alarm Handler
#

Alarm servers	DIS_DNS DColl SQM Config BIAS ARDUINO	# Servers to watch
Alarm period	30	# Check interval in seconds


#
# Bias control
#

Bias PixMapTable        ../config/PixelMap.txt
Bias TimeOut            0.50   # Timeout to return from read (0.01,...5.00) s
Bias StatusRefreshRate  2.00  # Status update rate (0.01,...50.00) Hz
Bias CCPort		3000      # Socket port
Bias DACMin		11008     # Starting point of DAC to voltage calibration
Bias DACMax		12496     # End point
Bias HVCalibOffset 67.000000 # Calibration of DAC to voltage values
Bias HVCalibSlope  0.006400  # Calibration of DAC to voltage values
Bias HVMaxDiff     500   # Maximum change of DAC value per iteration
Bias Boards        FTCVIP44	  # List of HV boards