// $Id: vme_rcc_lib.h,v 1.9 2007/11/08 07:56:44 joos Exp $
/************************************************************************/
/*									*/
/* File: vme_rcc_lib.h							*/
/*									*/
/* This is the private header file for RCC VMEbus library		*/
/*									*/
/*  2. Nov. 01  MAJO  created						*/
/*  2. Nov. 01  JOP   interrupts					*/
/*									*/
/************ C 2001 - The software with that certain something *********/

#ifndef _VME_RCC_LIB_H 
#define _VME_RCC_LIB_H

#include <linux/types.h>
#include "vme_rcc_common.h"

/***************/
/*error strings*/
/***************/
#define VME_SUCCESS_STR             "Function successfully executed"
#define VME_NOTKNOWN_STR            "Input parameter has illegal value"
#define VME_UNKNOWN_STR             "Unknown type of error"
#define VME_NOTOPEN_STR             "The library has not yet been opened"
#define VME_RANGE_STR               "Input parameter is out ofrange"
#define VME_BUSERROR_STR            "VMEbus bus error received"
#define VME_ALIGN_STR               "Misaligned address/size"
#define VME_NOCHAINMEM_STR          "Not enough memory available for DMA chain"
#define VME_NOBUSERROR_STR          "There was no bus error information"
#define VME_TOOLONG_STR             "Overflow of internal chain"
#define VME_DMABUSY_STR             "The DMA controller is busy"
#define VME_TIMEOUT_STR             "The time-out has expired"
#define VME_FILE_STR                "Error from file operation (open/close)"
#define VME_NOMAP_STR               "All master mappings are in use"
#define VME_NOSTATMAP_STR           "Static mapping does not fit parameters"
#define VME_IRGBUSY_STR             "The interrupg generator is busy"
#define VME_EIO_STR                 "Unix: I/O error"
#define VME_EFAULT_STR              "Unix: Bad address"
#define VME_VIRT_STR                "Failed to get user virtual address"
#define VME_REMAP_STR               "Error from remap_page_range() kernel function"
#define VME_ENOSYS_STR              "Unix: Function not implemented"
#define VME_NOSIZE_STR              "A <size> parameter is zero"
#define VME_CMEM_FAIL_STR           "Error from CMEM_RCC library"
#define VME_ERESTARTSYS_STR         "Unix: driver got interrupted in down_interruptible"
#define VME_DMAERR_STR              "Error in DMA transfer, see status words in transfer list"
#define VME_PCI_ERR_STR             "Error on PCI"
#define VME_VME_ERR_STR             "VMEbus BERR"
#define VME_PROTOCOL_ERR_STR        "Protocol error"
#define VME_NOT_EXECUTED_STR        "This transfer has not been executed"
#define VME_MUNMAP_STR              "Error from call to munmap()"
#define VME_ILLREV_STR              "Universe has wrong revision (too old)"
#define VME_IOREMAP_STR             "Error from call to ioremap()"
#define VME_REQIRQ_STR              "Error from call to request_irq()"
#define VME_TOOMANYINT_STR          "Too many interrupt items"
#define VME_TOOMANYHDL_STR          "Too many Interrupt handles"
#define VME_INTUSED_STR             "Vector already in use"
#define VME_ILLINTLEVEL_STR         "Illegal Interrupt Level"
#define VME_ILLINTTYPE_STR          "Illegal Interrupt Type"
#define VME_INTCONF_STR             "Illegal level, type combination"
#define VME_LVLDISABLED_STR         "Level is disabled"
#define VME_LVLISNOTRORA_STR        "Level is not RORA"
#define VME_ILLINTHANDLE_STR        "Illegal interrupt handle"
#define VME_INTBYSIGNAL_STR         "Interrupted by signal"
#define VME_NOINTERRUPT_STR         "No pending interrupt found"
#define VME_ENOMEM_STR              "No memory"
#define VME_KMALLOC_STR             "Error in driver from call to kmalloc"
#define VME_BERRTBLFULL_STR         "BERR process table full"
#define VME_BERRNOTFOUND_STR        "Entry in BERR process table not found"
#define VME_ILL_TO_STR              "Value for time_out is out of range"
#define VME_NODOMEMEM_STR           "No morememory left in DMA done list"
#define VME_NO_CODE_STR             "No error code available"
#define VME_UNKNOWN_BOARD_STR       "Failed to determine board type"
#define VME_IO_FAIL_STR             "Error from IO_RCC library"
#define VME_NOCRCSRMAP_STR          "There is no mapping for CR/CSR space access"
#define VME_SYSFAILTBLFULL_STR      "An other process has already linked the SYSFAIL interrupt"
#define VME_SYSFAILTBLNOTLINKED_STR "The SYSFAIL interrupt is not linked by your process"
#define VME_SYSFAILNOTLINKED_STR    "You have to link the SYSFAIL interrupt before you can register a signal"
#define VME_NOSTATMAP2_STR          "All master maps are in use"
#define VME_IOUNMAP_STR             "The kernel virtual address for the given master mapping could not be found"
#define VME_INTDISABLED_STR         "You are trying to link to a disabled interrupt level. Check the status with vmeconfig"

/***************************************/
/*Various upper limits for arrays, etc.*/
/***************************************/
#define VME_MAX_SLAVEMAP         4        //Max number of slave mappings
#define VME_DMA_MAX_BLOCK_SIZE   0x800000 //Max size of single DMA
#define VME_MAX_INTHANDLE	 10	  // Max # interrupt handles

/***************************************/
/*Definitions to be used in the library*/
/*do not modify                        */
/***************************************/
#define DEVICE                  "/dev/vme_rcc"
#define DMA_CHAIN_END           1
#define CRCSR_BASE              0
#define CRCSR_SIZE              0x01000000
#define CRCSR_OPT               0
#define CRCSR_OFF               0x80000

/********/
/*Macros*/
/********/
#define ISOPEN {if(!is_open) return(VME_NOTOPEN);}
#define PE(x) {printf("Error from vme_rcc library: %s\n",x);     break;}

#ifdef __cplusplus
extern "C" {
#endif
/******************************/
/* Internal service functions */
/******************************/
#ifdef __cplusplus
}
#endif

#endif