source: drsdaq/VME/atlas/include/vme_rcc/vme_rcc_lib.h@ 8405

Last change on this file since 8405 was 22, checked in by ogrimm, 16 years ago
First commit of drsdaq program
  • Property svn:executable set to *
File size: 5.7 KB
Line 
1// $Id: vme_rcc_lib.h,v 1.9 2007/11/08 07:56:44 joos Exp $
2/************************************************************************/
3/* */
4/* File: vme_rcc_lib.h */
5/* */
6/* This is the private header file for RCC VMEbus library */
7/* */
8/* 2. Nov. 01 MAJO created */
9/* 2. Nov. 01 JOP interrupts */
10/* */
11/************ C 2001 - The software with that certain something *********/
12
13#ifndef _VME_RCC_LIB_H
14#define _VME_RCC_LIB_H
15
16#include <linux/types.h>
17#include "vme_rcc_common.h"
18
19/***************/
20/*error strings*/
21/***************/
22#define VME_SUCCESS_STR "Function successfully executed"
23#define VME_NOTKNOWN_STR "Input parameter has illegal value"
24#define VME_UNKNOWN_STR "Unknown type of error"
25#define VME_NOTOPEN_STR "The library has not yet been opened"
26#define VME_RANGE_STR "Input parameter is out ofrange"
27#define VME_BUSERROR_STR "VMEbus bus error received"
28#define VME_ALIGN_STR "Misaligned address/size"
29#define VME_NOCHAINMEM_STR "Not enough memory available for DMA chain"
30#define VME_NOBUSERROR_STR "There was no bus error information"
31#define VME_TOOLONG_STR "Overflow of internal chain"
32#define VME_DMABUSY_STR "The DMA controller is busy"
33#define VME_TIMEOUT_STR "The time-out has expired"
34#define VME_FILE_STR "Error from file operation (open/close)"
35#define VME_NOMAP_STR "All master mappings are in use"
36#define VME_NOSTATMAP_STR "Static mapping does not fit parameters"
37#define VME_IRGBUSY_STR "The interrupg generator is busy"
38#define VME_EIO_STR "Unix: I/O error"
39#define VME_EFAULT_STR "Unix: Bad address"
40#define VME_VIRT_STR "Failed to get user virtual address"
41#define VME_REMAP_STR "Error from remap_page_range() kernel function"
42#define VME_ENOSYS_STR "Unix: Function not implemented"
43#define VME_NOSIZE_STR "A <size> parameter is zero"
44#define VME_CMEM_FAIL_STR "Error from CMEM_RCC library"
45#define VME_ERESTARTSYS_STR "Unix: driver got interrupted in down_interruptible"
46#define VME_DMAERR_STR "Error in DMA transfer, see status words in transfer list"
47#define VME_PCI_ERR_STR "Error on PCI"
48#define VME_VME_ERR_STR "VMEbus BERR"
49#define VME_PROTOCOL_ERR_STR "Protocol error"
50#define VME_NOT_EXECUTED_STR "This transfer has not been executed"
51#define VME_MUNMAP_STR "Error from call to munmap()"
52#define VME_ILLREV_STR "Universe has wrong revision (too old)"
53#define VME_IOREMAP_STR "Error from call to ioremap()"
54#define VME_REQIRQ_STR "Error from call to request_irq()"
55#define VME_TOOMANYINT_STR "Too many interrupt items"
56#define VME_TOOMANYHDL_STR "Too many Interrupt handles"
57#define VME_INTUSED_STR "Vector already in use"
58#define VME_ILLINTLEVEL_STR "Illegal Interrupt Level"
59#define VME_ILLINTTYPE_STR "Illegal Interrupt Type"
60#define VME_INTCONF_STR "Illegal level, type combination"
61#define VME_LVLDISABLED_STR "Level is disabled"
62#define VME_LVLISNOTRORA_STR "Level is not RORA"
63#define VME_ILLINTHANDLE_STR "Illegal interrupt handle"
64#define VME_INTBYSIGNAL_STR "Interrupted by signal"
65#define VME_NOINTERRUPT_STR "No pending interrupt found"
66#define VME_ENOMEM_STR "No memory"
67#define VME_KMALLOC_STR "Error in driver from call to kmalloc"
68#define VME_BERRTBLFULL_STR "BERR process table full"
69#define VME_BERRNOTFOUND_STR "Entry in BERR process table not found"
70#define VME_ILL_TO_STR "Value for time_out is out of range"
71#define VME_NODOMEMEM_STR "No morememory left in DMA done list"
72#define VME_NO_CODE_STR "No error code available"
73#define VME_UNKNOWN_BOARD_STR "Failed to determine board type"
74#define VME_IO_FAIL_STR "Error from IO_RCC library"
75#define VME_NOCRCSRMAP_STR "There is no mapping for CR/CSR space access"
76#define VME_SYSFAILTBLFULL_STR "An other process has already linked the SYSFAIL interrupt"
77#define VME_SYSFAILTBLNOTLINKED_STR "The SYSFAIL interrupt is not linked by your process"
78#define VME_SYSFAILNOTLINKED_STR "You have to link the SYSFAIL interrupt before you can register a signal"
79#define VME_NOSTATMAP2_STR "All master maps are in use"
80#define VME_IOUNMAP_STR "The kernel virtual address for the given master mapping could not be found"
81#define VME_INTDISABLED_STR "You are trying to link to a disabled interrupt level. Check the status with vmeconfig"
82
83/***************************************/
84/*Various upper limits for arrays, etc.*/
85/***************************************/
86#define VME_MAX_SLAVEMAP 4 //Max number of slave mappings
87#define VME_DMA_MAX_BLOCK_SIZE 0x800000 //Max size of single DMA
88#define VME_MAX_INTHANDLE 10 // Max # interrupt handles
89
90/***************************************/
91/*Definitions to be used in the library*/
92/*do not modify */
93/***************************************/
94#define DEVICE "/dev/vme_rcc"
95#define DMA_CHAIN_END 1
96#define CRCSR_BASE 0
97#define CRCSR_SIZE 0x01000000
98#define CRCSR_OPT 0
99#define CRCSR_OFF 0x80000
100
101/********/
102/*Macros*/
103/********/
104#define ISOPEN {if(!is_open) return(VME_NOTOPEN);}
105#define PE(x) {printf("Error from vme_rcc library: %s\n",x); break;}
106
107#ifdef __cplusplus
108extern "C" {
109#endif
110/******************************/
111/* Internal service functions */
112/******************************/
113#ifdef __cplusplus
114}
115#endif
116
117#endif
Note: See TracBrowser for help on using the repository browser.