source: fact/BIASctrl/Crate.cc@ 10044

/********************************************************************\

  Interface to FACT bias voltage crate
                
\********************************************************************/

#include "Crate.h"
#include "ProcessIO.h" // Must be not in HV.h to avoid problem with declaring class ProcessIO

using namespace std;

//
// Constructor
//
Crate::Crate(string CrateName, int Number, class ProcessIO *PIO) {
   
  struct termios tio;

  // Initialize
  InitOK = false;
  m = PIO;
  Name = new char [CrateName.size()+1];
  strcpy(Name, CrateName.c_str());
  CrateNumber = Number;
  WrapCount = -1;

  for (int i=0; i<MAX_NUM_BOARDS; i++) {
        for (int j=0; j<NUM_CHANNELS; j++) {
          OC[i][j] = false;
          Current[i][j] = 0;
        }
  }
  ResetHit = false;
  WrapOK = true;
  WrapCount = -1;
  ErrorCount = 0;

  // Create DIM services
  stringstream ID;
  ID << setfill('0') << setw(2) << CrateNumber;

  NameService = new DimService ((SERVER_NAME"/NAME/ID"+ID.str()).c_str(), Name);
  BiasVolt = new DimService ((char *) (SERVER_NAME"/VOLT/ID"+ID.str()).c_str(), (char *) "D", Volt, MAX_NUM_BOARDS*NUM_CHANNELS*sizeof(double));

  ClearVoltageArrays();

  // Open device
  if ((fDescriptor = open(("/dev/"+CrateName).c_str(), O_RDWR|O_NOCTTY|O_NDELAY)) == -1) {
    if(errno != 2) m->PrintMessage("Error: Could not open device %d/%s (%s)\n", CrateNumber, Name, strerror(errno));
    return;
  }

  // Get current serial port settings
  if (tcgetattr(fDescriptor, &tio) == -1) {
    m->PrintMessage("Error: tcgetattr() failed on device %s (%s)\n", Name, strerror(errno));
    return;   
  }

  // Set baudrate and raw mode
  if (cfsetspeed(&tio, BAUDRATE) == -1) {
        m->PrintMessage("Error: Could not set baud rate of device %s (%s)\n", Name,  strerror(errno));
        return;
  }
  cfmakeraw(&tio);
  if (tcsetattr(fDescriptor, TCSANOW, &tio ) == -1) {
        m->PrintMessage("Error: tcsetattr() failed on device %s (%s)\n", Name, strerror(errno));
        return;
  }
  
  InitOK = true;
}

//
// Destructor (Resets board)
//
Crate::~Crate() {

  if(fDescriptor != -1) {
    SystemReset();
    close(fDescriptor);
  }

  delete NameService;
  delete BiasVolt;
  delete[] Name;
}


// Communicate: Write and read from HV Board until time-out has been reached 
//
// Returns: 0 error, 1 success, -1 time-out exceeded
int Crate::Communicate(unsigned char* wbuf, int Bytes) {

  unsigned char rbuf[3];
  int N, Ret = 0;
  fd_set SelectDescriptor;
  struct timeval WaitTime = {(long) m->fTimeOut, (long) ((m->fTimeOut-(long) m->fTimeOut)*1e6)};
  
  // === Lock file descriptor ===
  if (lockf(fDescriptor, F_LOCK, 0) == -1) {
        m->Message(m->ERROR, "Failed to lock file descriptor (%s)", strerror(errno));
        return 0;
  }

  // === Write data ===
  if ((N = write(fDescriptor, wbuf, Bytes)) < Bytes) {
    if (N == -1) m->Message(m->ERROR, "Could not write data to crate (%s)", strerror(errno));
    else m->Message(m->ERROR, "Could write only %d of %d bytes to board", N, Bytes);
    ErrorCount++;
        goto ExitCommunicate;
  }

  // === Try to read until time-out ===
  FD_ZERO(&SelectDescriptor);   FD_SET(fDescriptor, &SelectDescriptor);
  if (select(fDescriptor+1, &SelectDescriptor, NULL, NULL, &WaitTime)==-1) {
    m->Message(m->ERROR, "Error with select() (%s)", strerror(errno));
        goto ExitCommunicate;
  }
  // Time-out expired?
  if (!FD_ISSET(fDescriptor, &SelectDescriptor)) {
        Ret = -1;
        goto ExitCommunicate;
  }

  // Read data   
  if ((N = read(fDescriptor, &rbuf, 1)) == -1) {
    m->Message(m->ERROR, "Read error (%s)", strerror(errno));
    ErrorCount++;
        goto ExitCommunicate;
  }

  // === Update status information if three bytes were returned ===
  if (N == 3) {
    // This data only valid for channel set or channel read
        LastCurrent = rbuf[1] + (rbuf[0]&15)*256;
        LastOC = rbuf[0] & 128;
        ResetHit = rbuf[2] & 128;

        // Check wrap counter
        if (WrapCount != -1) {
          if ((WrapCount+1)%8 == ((rbuf[0]>>4) & 7)) WrapOK = true;
          else WrapOK = false;
        }
        WrapCount = (rbuf[0]>>4) & 7;
        Ret = 1;
  }
  
  // === UnLock file descriptor ===
  ExitCommunicate:
  if (lockf(fDescriptor, F_LOCK, 0) == -1) {
        m->Message(m->ERROR, "Failed to lock file descriptor (%s)", strerror(errno));
        return 0;
  }
  
  return Ret;
}

//
// System reset of bias crate
//
int Crate::SystemReset() {
  
  unsigned char wbuf[] = {0,0,0};
  int ret;
  
  if((ret = Communicate(wbuf, 3)) == 1) {
    ClearVoltageArrays();
    ErrorCount = 0;
  }
  return ret;
}

//
// Read channel status
//
int Crate::ReadChannel(unsigned int Board, unsigned int Channel) {
  
   // Check limits
  if (Board > MAX_NUM_BOARDS) {
    m->PrintMessage("Error: Board number out of range\n"); 
    return 0;
  }
  if (Channel > NUM_CHANNELS) {
    m->PrintMessage("Error: Channel number out of range\n"); 
    return 0;
  }

  // Execute command
  unsigned char wbuf[] = {1<<5 | Board<<1 | (Channel&16)>>4, Channel<<4, 0};
  int ret;  
    
  if ((ret = Communicate(wbuf, 3)) == 1) {
        Current[Board][Channel] = LastCurrent;
        OC[Board][Channel] = LastOC;
  }
  return ret;
}


// ***** Global set *****
int Crate::GlobalSet(unsigned int SetPoint) {

  // Check limit
  if (SetPoint > 0x0FFF) {
    m->PrintMessage("Error: Voltage DAC value above 0x0FFF\n"); 
    return 0;
  }

  // Execute command
  unsigned char wbuf[] = {1<<6 , SetPoint>>8, SetPoint};
  int ret;  

  if ((ret = Communicate(wbuf, 3)) == 1) {
        for (int i=0; i<MAX_NUM_BOARDS; i++) {
      for (int j=0; j<NUM_CHANNELS; j++) DAC[i][j] = SetPoint;
        }
  }
  return ret;
}


// ***** Channel set *****
int Crate::ChannelSet(int Board, int Channel, unsigned int SetPoint) {
  
  // Check limits
  if (SetPoint > 0x0FFF) {
    m->PrintMessage("Error: Voltage DAC value above 0x0FFF\n"); 
    return 0;
  }
  if (Board > MAX_NUM_BOARDS) {
    m->PrintMessage("Error: Board number out of range\n"); 
    return 0;
  }
  if (Channel > NUM_CHANNELS) {
    m->PrintMessage("Error: Channel number out of range\n"); 
    return 0;
  }

  // Execute command
  unsigned char wbuf[] = {3<<5 |  Board<<1 | (Channel&16)>>4, Channel<<4 | SetPoint>>8, SetPoint};
  int ret;  
    
  if ((ret = Communicate(wbuf, 3)) == 1) {
    DAC[Board][Channel] = SetPoint;
        Current[Board][Channel] = LastCurrent;
        OC[Board][Channel] = LastOC;
  }
  return ret;
}


// ***** Synchronize board *****
bool Crate::Synch() {
  
  unsigned char wbuf = 0;
  int Trial = 0, ret;
  
  while(++Trial <= 3) {
    if((ret = Communicate(&wbuf, 1)) == 1) return true;
    if (ret == 0) break;
  }
  return false;
}


// ***** Set all voltages of board to zero *****
void Crate::ClearVoltageArrays() {

  for (int i=0; i<MAX_NUM_BOARDS; i++) {
    for (int j=0; j<NUM_CHANNELS; j++){
      DAC[i][j] = 0;
      //Volt[i][j] = 0.0;      
    }
  }
  // Update DIM services
  BiasVolt->updateService();
}