source: fact/BIASctrl/User.cc@ 11406

Last change on this file since 11406 was 11362, checked in by ogrimm, 13 years ago
Default voltage allowed for pixel and channel commands
File size: 19.0 KB
Line 
1//
2// Class processing user input
3//
4
5#include "User.h"
6#include <readline/readline.h>
7
8using namespace std;
9
10// Branch table for command evaluation
11static const struct CL_Struct { const char *Name;
12 void (User::*CommandPointer)();
13 unsigned int MinNumParameter;
14 const char *Parameters;
15 const char *Help;
16 } CommandList[] =
17 {{"pixel", &User::cmd_hv, 2, "<pix id> <volt|default>", "Change bias of pixel (to default value)"},
18 {"channel", &User::cmd_hv, 2, "<range> <volt|default>", "Change bias of (all) channels of active crate"},
19 {"gs", &User::cmd_gs, 1, "[crate] <volt>", "Global voltage set active crate"},
20 {"reset", &User::cmd_reset, 0, "", "Reset active crate"},
21 {"synch", &User::cmd_synch, 0, "", "Synchronize active crate"}, {"crate", &User::cmd_crate, 1, "<number>", "Select active crate"},
22 {"status", &User::cmd_status, 0, "[dac|current]", "Show status information (DAC values if requested)"},
23 {"mode", &User::cmd_mode, 1, "<static|dynamic>", "Set voltage stabilization mode (experimental)"},
24 {"load", &User::cmd_load, 1, "<file>", "Load and set bias settings from file"},
25 {"save", &User::cmd_save, 1, "<file>", "Save current bias settings to file"},
26 {"rate", &User::cmd_rate, 1, "<rate>", "Set refresh rate in Hz"},
27 {"timeout", &User::cmd_timeout, 1, "<time>", "Set timeout to return from read in seconds"},
28 {"help", &User::cmd_help, 0, "", "Print help"},
29 {"exit", &User::cmd_exit, 0, "", "Exit program"}};
30
31
32//
33// Constructor
34//
35User::User(): EvidenceServer(SERVER_NAME) {
36
37 MainThread = pthread_self();
38
39 // DIM console service used in PrintMessage()
40 ConsoleText = NULL;
41 ConsoleOut = new DimService(SERVER_NAME"/ConsoleOut", (char *) "");
42
43 // Get configuration data
44 vector<string> Boards = Tokenize(GetConfig("Boards"), " \t");
45 Boards = Tokenize("FTE00FOH", " \t");
46 fTimeOut = atof(GetConfig("TimeOut").c_str());
47 fStatusRefreshRate = atof(GetConfig("StatusRefreshRate").c_str());
48 fMaxDiff = atof(GetConfig("HVMaxDiffNew").c_str());
49
50 if (fStatusRefreshRate < MIN_RATE || fStatusRefreshRate > MAX_RATE) fStatusRefreshRate = 1;
51
52 vector<string> Text = Tokenize(GetConfig("DefaultVoltage", ""), " \t");
53
54 for (unsigned int i=0; i<Text.size(); i++) {
55 DefaultVoltage.push_back(atof(Text[i].c_str()));
56 }
57
58 // Open devices
59 for (unsigned int i=0; i<Boards.size(); i++) {
60
61 class Crate *New = new class Crate(Boards[i], Crates.size(), this);
62
63 if (New->InitOK && New->Synch()) {
64 PrintMessage("Synchronized and reset crate %s (#%d)\n", Boards[i].c_str(), Crates.size());
65 Crates.push_back(New);
66 }
67 else {
68 Message(WARN, "Failed to synchronize crate %s", Boards[i].c_str());
69 delete New;
70 }
71 }
72
73 // Set active crate
74 if (!Boards.empty()) ActiveCrate = 0;
75 else ActiveCrate = -1;
76
77 // Create PixelMap instance (map from config server)
78 DimRpcInfo RPC((char *) "ConfigRequest", (char *) "");
79 RPC.setData((char *) "Misc PixelMap");
80 PixMap = new PixelMap(std::string(RPC.getString(), RPC.getSize()));
81
82 // Install DIM command (after all initialized)
83 DIMCommand = new DimCommand((char *) SERVER_NAME"/Command", (char *) "C", this);
84
85 // Create monitor thread and make accessible for sending signal
86 if ((pthread_create(&Thread, NULL, (void * (*)(void *)) LaunchMonitor,(void *) this)) != 0) {
87 Message(FATAL, "pthread_create() failed with Monitor thread");
88 }
89}
90
91//
92// Destructor
93//
94User::~User() {
95
96 // Wait for thread to quit
97 if (pthread_cancel(Thread) != 0) Message(ERROR, "pthread_cancel() failed in ()");
98 if (pthread_join(Thread, NULL) != 0) Message(ERROR, "pthread_join() failed in ()");
99
100 // Delete all crates
101 for (unsigned int i=0; i<Crates.size(); i++) delete Crates[i];
102
103 delete DIMCommand;
104 delete PixMap;
105 delete ConsoleOut;
106 free(ConsoleText);
107}
108
109//
110// Process user input
111//
112void User::commandHandler() {
113
114 // Build string safely
115 string Command = string(getCommand()->getString(), getCommand()->getSize());
116
117 // Check if command is legal and ignore empty commands
118 if (getCommand() != DIMCommand || Command.size() < 2) return;
119
120 // Shell command
121 if(Command[0]=='.') {
122 if (system(Command.c_str()+1) == 1) {
123 PrintMessage("Error with system() call\n");
124 }
125 return;
126 }
127
128 // Parse command into tokens
129 Parameter = Tokenize(Command, " ");
130
131 // Search for command in command list
132 for(unsigned int CmdNumber=0; CmdNumber<sizeof(CommandList)/sizeof(CL_Struct); CmdNumber++) {
133 if (Match(Parameter[0], CommandList[CmdNumber].Name)) {
134 if(Parameter.size()-1 < CommandList[CmdNumber].MinNumParameter) {
135 PrintMessage("Usage: %s %s\n", CommandList[CmdNumber].Name, CommandList[CmdNumber].Parameters);
136 return;
137 }
138
139 // Jump to command function
140 (this->*CommandList[CmdNumber].CommandPointer)();
141 return;
142 }
143 }
144 PrintMessage("Unknown command '%s'\n", Parameter[0].c_str());
145}
146
147
148// Print help
149void User::cmd_help() {
150
151 char Buffer[MAX_COM_SIZE];
152 for(unsigned int i=0; i<sizeof(CommandList)/sizeof(CL_Struct); i++) {
153 snprintf(Buffer, sizeof(Buffer), "%s %s", CommandList[i].Name, CommandList[i].Parameters);
154 PrintMessage("%-28s%s\n", Buffer, CommandList[i].Help);
155 }
156
157 PrintMessage(".<command> Execute shell command\n\n"
158 "Items in <> are mandatory, in [] optional, | indicates mutual exclusive or.\n"
159 "Channel ranges can be 'all', a single number or in the form 'a-b'.\n");
160}
161
162//
163// Synchronize boards
164//
165void User::cmd_synch() {
166
167 if (ActiveCrate == -1) return;
168
169 if (Crates[ActiveCrate]->Synch()) PrintMessage("Synchronized crate %d\n", ActiveCrate);
170 else PrintMessage("Failed to synchronize crate %d\n", ActiveCrate);
171}
172
173//
174// Select active crate
175//
176void User::cmd_crate() {
177
178 int Crate;
179
180 if (!ConvertToInt(Parameter[1], &Crate)) {
181 PrintMessage("Error: Wrong number format\n");
182 return;
183 }
184
185 // Check limits
186 if (Crate<0 || Crate>=(int) Crates.size()) {
187 PrintMessage("Crate number %d not existing\n", Crate);
188 return;
189 }
190
191 ActiveCrate = Crate;
192}
193
194//
195// Set new bias voltage
196//
197void User::cmd_hv() {
198
199 unsigned int Errors=0;
200 double Double;
201 struct Range Crt, Chan;
202 unsigned int PixelID = 0;
203 vector< map<unsigned int, double> > Voltages (Crates.size());
204
205 // Loop over all parameters
206 for (unsigned int n=1; n < Parameter.size()-1; n+=2) {
207
208 // Pixel identification?
209 if (Match(Parameter[0], "pixel")) {
210 // Skip if first character is not digit
211 if (isdigit(Parameter[n][0] == 0)) continue;
212
213 // Extract pixel ID
214 PixelID = atoi(Parameter[n].c_str());
215
216 // Skip if pixel ID not existing
217 if (PixMap->Pixel_to_HVcrate(PixelID) == PixMap->PM_ERROR_CODE) continue;
218
219 Crt.Min = Crt.Max = PixMap->Pixel_to_HVcrate(PixelID);
220 Chan.Min = Chan.Max = PixMap->Pixel_to_HVboard(PixelID)*NUM_CHANNELS + PixMap->Pixel_to_HVchannel(PixelID);
221 }
222 // Channel identification
223 else {
224 if (ActiveCrate == -1) continue;
225 else Crt.Min = Crt.Max = ActiveCrate;
226
227 Chan.Min = 0;
228 Chan.Max = MAX_NUM_BOARDS*NUM_CHANNELS-1;
229
230 if (!ConvertToRange(Parameter[n], Chan)) {
231 PrintMessage("Numeric conversion or out-of-range error for parameter %d, skipping channel\n", n);
232 continue;
233 }
234 }
235
236 // Convert voltage value and check format
237 if (!ConvertToDouble(Parameter[n+1], &Double) && !Match(Parameter[n+1], "default")) {
238 PrintMessage("Error: Wrong number format for voltage setting\n");
239 continue;
240 }
241
242 // Loop over given crates and channels
243 for (int i=Crt.Min; i<=Crt.Max; i++) for (int j=Chan.Min; j<=Chan.Max; j++) {
244 // Check that indices are in legal range
245 if (i<0 || i>=(int) Crates.size() || j<0 || j >=MAX_NUM_BOARDS*NUM_CHANNELS) continue;
246
247 // Voltage change (number starts with + oder -) ignored if current DAC value is zero
248 if ((Parameter[n+1][0]=='+' || Parameter[n+1][0]=='-') && Crates[i]->GetDAC(j) == 0) continue;
249
250 // Should the default value be set?
251 if (Match(Parameter[n+1], "default")) {
252 // Pixel ID given directly or channel number?
253 if (!Match(Parameter[0], "pixel")) {
254 vector<unsigned int> List = PixMap->HV_to_Pixel(i, j/NUM_CHANNELS, j%NUM_CHANNELS);
255 if (!List.empty()) PixelID = List[0];
256 else PixelID = numeric_limits<unsigned int>::max();
257 }
258
259 // Set default voltage
260 if (PixelID < DefaultVoltage.size()) Voltages[i][j] = DefaultVoltage[PixelID];
261 else Voltages[i][j] = 0;
262 continue;
263 }
264
265 // Relative or absolute change?
266 if (isdigit(Parameter[n+1][0]) == 0) Voltages[i][j] = Crates[i]->GetVoltage(j) + Double;
267 else Voltages[i][j] = Double;
268 } // Channels
269 } // Loop over command argument
270
271 // Ramp voltages and update DIM services
272 for (unsigned int i=0; i<Voltages.size(); i++) {
273 Errors += RampVoltages(i, Voltages[i]);
274 Crates[i]->UpdateDIM();
275 }
276
277 // Error message only if not yet too many errors
278 if (Errors > 0) {
279 for (unsigned int i=0; i<Crates.size(); i++) {
280 if (Crates[i]->ErrorCount > MAX_ERR_COUNT) return;
281 }
282 Message(ERROR, "%d errors occurred from SetChannels()", Errors);
283 }
284}
285
286//
287// Load bias settings from file
288//
289void User::cmd_load() {
290
291 char Buffer[MAX_COM_SIZE];
292 int Errors = 0, Channel;
293 double Value;
294 FILE *File;
295 map<unsigned int, double> Voltages;
296
297 // Open file
298 if ((File=fopen(Parameter[1].c_str(), "r")) == NULL) {
299 PrintMessage("Error: Could not open file '%s' (%s)\n", Parameter[1].c_str(), strerror(errno));
300 return;
301 }
302
303 // Scan through file line by line
304 while (fgets(Buffer, sizeof(Buffer), File) != NULL) {
305 for (unsigned int Crate=0; Crate<Crates.size(); Crate++) if (Match(Crates[Crate]->Name, Buffer)) {
306
307 if ((int) Crate != ActiveCrate) continue;
308 PrintMessage("Found bias settings for crate %s (#%d)\n\r", Crates[Crate]->Name, Crate);
309
310 Voltages.clear();
311 Channel = 0;
312 while (fscanf(File, "%lf", &Value)==1 && Channel<MAX_NUM_BOARDS*NUM_CHANNELS) {
313 Voltages[Channel++] = Value;
314 }
315
316 // Ramp channels
317 Errors += RampVoltages(Crate, Voltages);
318
319 // Update DIM service
320 Crates[Crate]->UpdateDIM();
321
322 if (ferror(File) != 0) {
323 PrintMessage("Error reading DAC value from file, terminating. (%s)\n",strerror(errno));
324 return;
325 }
326 else PrintMessage("\nFinished updating board\n");
327 } // Loop over boards
328 } // while()
329
330 if (Errors != 0) PrintMessage("Warning: %d error(s) occurred\n", Errors);
331 if (fclose(File) != 0) PrintMessage("Error: Could not close file '%s'\n", Parameter[1].c_str());
332}
333
334//
335// Set refresh rate
336//
337void User::cmd_rate() {
338
339 double Rate;
340
341 if (!ConvertToDouble(Parameter[1], &Rate)) {
342 PrintMessage("Error: Wrong number format\n");
343 return;
344 }
345
346 // Check limits
347 if (Rate<MIN_RATE || Rate>MAX_RATE) {
348 PrintMessage("Refresh rate out of range (min: %.2f Hz, max: %.2f Hz)\n", MIN_RATE, MAX_RATE);
349 return;
350 }
351
352 fStatusRefreshRate = Rate;
353 PrintMessage("Refresh rate set to %.2f Hz\n", fStatusRefreshRate);
354}
355
356//
357// Reset crates
358//
359void User::cmd_reset() {
360
361 if (ActiveCrate == -1) return;
362
363 if (Crates[ActiveCrate]->SystemReset() == 1) PrintMessage("System reset of crate %d\n", ActiveCrate);
364 else PrintMessage("Error: Could not reset crate %d\n", ActiveCrate);
365
366}
367
368//
369// Read channel
370//
371void User::cmd_gs() {
372
373 double Voltage;
374
375 if (ActiveCrate == -1) return;
376
377 if (!ConvertToDouble(Parameter[1], &Voltage)) {
378 PrintMessage("Error: Wrong number format\n");
379 return;
380 }
381
382 if (Crates[ActiveCrate]->GlobalSet(Voltage) != 1) {
383 PrintMessage("Error: Could not global set crate %d\n", ActiveCrate);
384 }
385}
386
387//
388// Save bias settings of all boards
389//
390void User::cmd_save() {
391
392 FILE *File;
393 time_t Time = time(NULL);
394
395 if ((File = fopen(Parameter[1].c_str(), "w")) == NULL) {
396 PrintMessage("Error: Could not open file '%s' (%s)\n", Parameter[1].c_str(), strerror(errno));
397 return;
398 }
399
400 fprintf(File,"********** Bias settings of %s **********\n\n", ctime(&Time));
401
402 for (unsigned int i=0; i<Crates.size(); i++) {
403 fprintf(File, "%s\n\n", Crates[i]->Name);
404
405 for (int j=0; j<MAX_NUM_BOARDS*NUM_CHANNELS; j++) fprintf(File,"%.3f ",Crates[i]->GetVoltage(j));
406 fprintf(File, "\n");
407 }
408
409 if (fclose(File) != 0) {
410 PrintMessage("Error: Could not close file '%s' (%s)\n", Parameter[1].c_str(), strerror(errno));
411 }
412}
413
414//
415// Set operation mode
416//
417void User::cmd_mode() {
418
419 if (Match(Parameter[1], "static")) Mode = mode_static;
420 else {
421 Mode = mode_dynamic;
422 for (unsigned int i=0; i<Crates.size(); i++) {
423 Crates[i]->SetRefCurrent();
424 }
425 }
426}
427
428//
429// Print status
430//
431void User::cmd_status() {
432
433 PrintMessage(" Number of crates: %d\n", Crates.size());
434 PrintMessage(" Active crate: %d\n", ActiveCrate);
435 PrintMessage(" Refresh rate: %.2f Hz\n", fStatusRefreshRate);
436 PrintMessage(" Time out: %.2f s\n\n", fTimeOut);
437 PrintMessage(" MaxDiff : %u\n", fMaxDiff);
438
439 for (unsigned int i=0; i<Crates.size(); i++) {
440 PrintMessage(" CRATE %d (%s)\n Wrap counter: %s (%d) Reset: %s Error count: %d\n ",
441 i, Crates[i]->Name, Crates[i]->WrapOK ? "ok":"error", Crates[i]->WrapCount,
442 Crates[i]->ResetHit ? "yes" : "no", Crates[i]->ErrorCount);
443
444 if (Parameter.size() == 1) PrintMessage("Channel voltages (in V)");
445 else if (Match(Parameter[1], "dac")) PrintMessage("Channel voltages (in DAC values)");
446 else PrintMessage("Channel currents (in uA)");
447
448 for (int j=0; j<MAX_NUM_BOARDS*NUM_CHANNELS; j++) {
449 if (j%12 == 0) PrintMessage("\n%3.1d: ", j);
450 if (!Crates[i]->Present[j/NUM_CHANNELS][j%NUM_CHANNELS]) PrintMessage(" - ");
451 else if (Parameter.size() == 1) PrintMessage("%#5.2f ",Crates[i]->GetVoltage(j));
452 else if (Match(Parameter[1], "dac")) PrintMessage("%5d ", Crates[i]->GetDAC(j));
453 else PrintMessage("%#5.2f %s ", Crates[i]->GetCurrent(j), Crates[i]->OC[j/NUM_CHANNELS][j%NUM_CHANNELS] ? "OC":"");
454 }
455 PrintMessage("\n");
456 }
457}
458
459//
460// Set timeout to return from read
461//
462void User::cmd_timeout() {
463
464 double Timeout;
465
466 if (!ConvertToDouble(Parameter[1], &Timeout)) {
467 PrintMessage("Error: Wrong number format\n");
468 return;
469 }
470
471 fTimeOut = Timeout;
472 PrintMessage("Timeout set to %.2f s\n", fTimeOut);
473}
474
475//
476// Exit program (Signal makes readline return and sets ExitRequest)
477//
478void User::cmd_exit() {
479
480 pthread_kill(MainThread, SIGTERM);
481}
482
483
484//
485// Print message to screen and to DIM text service
486//
487void User::PrintMessage(const char *Format, ...) {
488
489 static char Error[] = "vasprintf() failed in PrintMessage()";
490 char *Text;
491
492 // Evaluate arguments
493 va_list ArgumentPointer;
494 va_start(ArgumentPointer, Format);
495 if (vasprintf(&Text, Format, ArgumentPointer) == -1) Text = Error;
496 va_end(ArgumentPointer);
497
498 // Print to console
499 printf("%s", Text); // New prompt
500 fflush(stdout);
501 if (strlen(Text)>0 && Text[strlen(Text)-1]=='\n') rl_on_new_line(); // New prompt
502
503 // Send to DIM text service
504 ConsoleOut->updateService(Text);
505
506 // Free old text
507 if (ConsoleText != Error) free(ConsoleText);
508 ConsoleText = Text;
509}
510
511
512// Ramp to new voltage with maximum step size given in fMaxDiff
513// No ramping when decreasing voltage
514unsigned int User::RampVoltages(int Crate, map<unsigned int, double> Voltages) {
515
516 map<unsigned int, double> Target;
517 int Errors = 0;
518
519 // Ramp until all channels at desired value
520 while (!Voltages.empty() && Errors < MAX_ERR_COUNT) {
521 // Remove channels already at target (check for DAC, not for floating-point voltage)
522 for (map<unsigned int, double>::iterator it = Voltages.begin(); it != Voltages.end(); ++it) {
523 //if (Crates[Crate]->GetDAC(it->first) == (unsigned int ) (it->second/90.0*0x0fff)) Voltages.erase(it);
524 if (fabs(Crates[Crate]->GetVoltage(it->first)-it->second) < 0.001) Voltages.erase(it);
525 }
526
527 // Limit voltage changes to fMaxDiff
528 Target = Voltages;
529 for (map<unsigned int, double>::iterator it = Target.begin(); it != Target.end(); ++it) {
530 if (Crates[Crate]->GetVoltage(it->first) + fMaxDiff < it->second) {
531 it->second = Crates[Crate]->GetVoltage(it->first) + fMaxDiff;
532 }
533 }
534
535 // Set channels to next target and wait 10 ms
536 if (Crates[Crate]->SetChannels(Target) != 1) Errors++;
537 usleep(10000);
538 }
539
540 return Errors;
541}
542
543
544//
545// Check status
546//
547void User::Monitor() {
548
549 static bool Warned = false;
550 int Ret;
551
552 while (!ExitRequest) {
553
554 // Wait (this is the only allowed cancelation point)
555 if ((Ret=pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL)) != 0) {
556 Message(FATAL, "pthread_setcancelstate() failed (%s)", strerror(Ret));
557 }
558 if (usleep((unsigned long) floor(1000000./fStatusRefreshRate)) == -1) {
559 Message(FATAL, "usleep() failed (%s)", strerror(errno));
560 }
561 if ((Ret=pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL)) != 0) {
562 Message(FATAL, "pthread_setcancelstate() failed (%s)", strerror(Ret));
563 }
564
565 // Check all crates
566 for (unsigned int i=0; i<Crates.size(); i++) {
567 if (Crates[i]->ErrorCount > MAX_ERR_COUNT) {
568 if (!Warned) {
569 Warned = true;
570 Message(WARN, "Crate %d has many read/write errors, further error reporting disabled", i);
571 }
572 continue;
573 }
574
575 if (Crates[i]->ResetHit) {
576 Message(INFO, "Manual reset of board %d, setting voltages to zero and issuing system reset", i);
577 Crates[i]->GlobalSet(0);
578 Crates[i]->SystemReset();
579 }
580
581 if (!Crates[i]->WrapOK) {
582 Message(ERROR, "Wrap counter mismatch of board %d", i);
583 }
584
585 if (Crates[i]->ReadAll() != 1) {
586 Message(ERROR, "Monitor could not read status from crate %d", i);
587 continue;
588 }
589
590 map<unsigned int, double> Voltages;
591
592 for (int j=0; j<MAX_NUM_BOARDS*NUM_CHANNELS; j++) {
593 if (Crates[i]->OC[j/NUM_CHANNELS][j%NUM_CHANNELS]) {
594 Message(WARN, "Overcurrent on crate %d, board %d, channel %d, setting voltage to zero", i, j/NUM_CHANNELS, j%NUM_CHANNELS);
595 Voltages[j] = 0;
596 }
597 }
598 if (!Voltages.empty()) {
599 Crates[i]->SetChannels(Voltages);
600 Crates[i]->SystemReset();
601 }
602
603 if (Mode == mode_dynamic) Crates[i]->AdaptVoltages();
604 } // for
605 } // while
606}
607
608// Call monitor loop inside class
609void User::LaunchMonitor(User *m) {
610
611 m->Monitor();
612}
613
614
615//
616// Check if two strings match (min 1 character must match)
617//
618bool User::Match(string str, const char *cmd) {
619
620 return strncasecmp(str.c_str(),cmd,strlen(str.c_str())==0 ? 1:strlen(str.c_str())) ? false:true;
621}
622
623//
624// Conversion function from string to double or int
625//
626// Return false if conversion did not stop on whitespace or EOL character
627bool User::ConvertToDouble(string String, double *Result) {
628
629 char *EndPointer;
630
631 *Result = strtod(String.c_str(), &EndPointer);
632 if(!isspace(*EndPointer) && *EndPointer!='\0') return false;
633 return true;
634}
635
636bool User::ConvertToInt(string String, int *Result) {
637
638 char *EndPointer;
639
640 *Result = (int) strtol(String.c_str(), &EndPointer, 0);
641 if(!isspace(*EndPointer) && *EndPointer!='\0') return false;
642 return true;
643}
644
645//
646// Interprets a range
647//
648bool User::ConvertToRange(string String, struct User::Range &R) {
649
650 int N=0, M=0; // Init to avoid compiler warning
651
652 // Full range
653 if (Match(String, "all")) return true;
654
655 // Single number
656 if (ConvertToInt(String, &N)) {
657 if (N>= R.Min && N<=R.Max) {
658 R.Max = R.Min = N;
659 return true;
660 }
661 return false;
662 }
663
664 // Range a-b
665 vector<string> V = EvidenceServer::Tokenize(String, "-");
666 if (V.size()==2 && ConvertToInt(V[0], &N) && ConvertToInt(V[1], &M) && N>=R.Min && M<=R.Max) {
667 R.Min = N;
668 R.Max = M;
669 return true;
670 }
671
672 return false;
673}
Note: See TracBrowser for help on using the repository browser.