source: fact/FADctrl/FADFormat.h@ 13400

#ifndef FADFORMAT_H_SEEN
#define FADFORMAT_H_SEEN

#include <stdint.h>

//
// Commands for FAD
//
#define CMD_Start 0x2200                                                // Start Run
#define CMD_Stop 0x2300                                                 // Stop Run
#define CMD_mode_command 0x3000                 // Set Socket mode to: command mode
#define CMD_mode_all_sockets 0x3100// Set Socket mode to: daq mode

#define CMD_Trigger 0xA000              // single trigger
#define CMD_DENABLE 0x0600      // DENABLE line HIGH
#define CMD_DDISABLE 0x0700     // DENABLE line LOW
#define CMD_DWRITE_RUN 0x0800   // DWRITE possibly HIGH
#define CMD_DWRITE_STOP 0x0900  // DWRITE always LOW
#define CMD_SCLK_ON 0x1000  
#define CMD_SCLK_OFF 0x1100
#define CMD_PS_DIRINC 0x1200
#define CMD_PS_DIRDEC 0x1300
#define CMD_PS_DO 0x1400
#define CMD_PS_RESET 0x1700
#define CMD_SRCLK_ON 0x1500
#define CMD_SRCLK_OFF 0x1600
#define CMD_Trigger_C 0x1F00    // continous trigger
#define CMD_Trigger_S 0x2000    // stop continous trigger

#define CMD_Execute 0x0400              // only after 'execute' Config-RAM changes will have an effect
#define CMD_Write 0x0500                // write to Config-RAM
#define CMD_Read 0x0A00                 // read from Config-RAM
#define CMD_RESET_TRIGGER_ID 0x2A00

#define CMD_TRIGGERS_ON 0x1800  // enables the trigger line
#define CMD_TRIGGERS_OFF 0x1900 // disables the trigger line

#define CMD_DRS_RST_LOW 0x3200
#define CMD_DRS_RST_HIGH 0x3300


//
// Other definitions
//
#define MAX_ADDR 0xFF           // highest address in Config-RAM
#define BADDR_ROI 0x00          // Baseaddress ROI-Values
#define BADDR_DAC 0x24          // Baseaddress DAC-Values
#define BADDR_CONT_TRIGGER_TIME 0x2C // Baseaddress for the continouus trigger timing.
#define ADDR_RUNNUMBER 0x2D //
#define MAX_VAL 65535
#define MAX_ROIVAL 1024
#define MAX_DACVAL 65535

const unsigned int NChannels    = 9;
const unsigned int NBins                = 1024;
const unsigned int NChips               = 4;
const unsigned int NTemp                = 4;
const unsigned int NDAC                 = 8;

//
// Data structures
//
typedef struct {

  uint16_t start_package_flag;
  uint16_t package_length;
  uint16_t version_no;
  uint16_t PLLLCK;

  uint16_t trigger_crc;
  uint16_t trigger_type;
  uint32_t trigger_id;

  uint32_t fad_evt_counter;
  uint32_t REFCLK_frequency;

  uint16_t board_id;
        uint8_t  zeroes;
  int8_t adc_clock_phase_shift;
  uint16_t number_of_triggers_to_generate;
  uint16_t trigger_generator_prescaler;

  uint64_t DNA;

  uint32_t time;
  uint32_t runnumber;

  int16_t drs_temperature[NTemp];

  uint16_t dac[NDAC];

} __attribute__((__packed__)) PEVNT_HEADER;

typedef struct {
uint16_t id;
uint16_t start_cell;
uint16_t roi;
uint16_t filling;
uint16_t adc_data[];
} __attribute__((__packed__)) PCHANNEL;
typedef struct {
uint16_t package_crc;
uint16_t end_package_flag;
} __attribute__((__packed__)) PEVNT_FOOTER;

#endif