Version history of FADctrl

22/10/2010	First check-in of FADctrl. Initial version derived from drsdaq revision 10007.
5/1/2011	First version of amplitude calibration (no secondary calibration, yet). New 'socketmode' command.
13/1/2011	Amplitude calibration data is written to text file.
19/1/2011	Implemented secondary calibration.
21/1/2011	DIM event thread now informed through pipe of new data
23/1/2011	Data can be written to disk in M0 format
24/1/2011	Integrated amplitude calibration into FADBoard class
27/1/2011	Moved OpenOtherSockets() to FADBoard class
2/2/2011	Warning if amplitude calibration missing for data taking
4/2/2011	Fixed exitHandler() being stuck at pthread_join()
11/2/2011	Moved connect() call to thread of FADBoard class
14/2/2011	Moved initialisation commands to Evidence configuration file
18/2/2011   Added 'reconnect' command
28/2/2011	Removed 'static' keywords in FADBoard::ReadLoop()
1/3/2011	Board list can be passed via command line
2/3/2011	Implemented new FAD data format
28/3/2011	Boards with communication error set themselves inactive
29/3/2011	Added Status message service for each board (removed several console messages in turn)
			Limited update rate of slow control data to 1 second or interval set by 'update'
1/4/2011	Added DIM frequency service
5/4/2011	Added DIM rate service for each board
6/4/2011	Bug fix in internal pipe communication	
4/5/2011	Removed 'daqmode' (had no function). Added 'reset_trigger' and 'runnumber' commands.
			Event format adapted (ADC data not sent in network byte order anymore).
20/5/2011	Missing pthread_mutexattr_init() in FADBoard constructor caused spurious errors when
			locking mutex
			Added cleanup handler to thread in FADBoard class to ensure mutex is unlocked when thread
			cancelled
25/5/2011	dcm_lock and dcm_ready bits were incorrectly evaluated.
3/6/2011	Raw data files will only contain boards active at the start of the run.
7/6/2011	DIM event service only contains active boards
21/6/2011	Command 'boards' takes 'none as argument
24/6/2011	PLL lock status published as DIM service
7/7/2011	Fixed error in setting the active boards in EventThread()
13/7/2011   FAD board time published as DIM service
13/6/2012   New command to determine dynamic range using the calibration DACs