source: fact/tools/PyDimCtrl/fact_dim_servers.py@ 15148

Last change on this file since 15148 was 14884, checked in by neise, 12 years ago
changed the layout of fact_dim_servers.py
File size: 125.3 KB
Line 
1from make_fix_dimservers import FactDimServer
2class FTM_CONTROL ( FactDimServer):
3 def version_number(self):
4 """
5 Dim Service
6 Native Dim service: Version number of Dim in use
7 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
8 L
9 """
10 return self._get("VERSION_NUMBER")
11
12 def disable_reports(self, *args):
13 """
14 Dim Command
15 disable sending rate reports
16 status[bool]:disable or enable that the FTM sends rate reports (yes/no)
17 B
18 """
19 self._cmd("DISABLE_REPORTS", *args)
20
21 def toggle_pixel(self, *args):
22 """
23 Dim Command
24 DESC in SERVICE_DESC is empty ?!
25 S:1
26 """
27 self._cmd("TOGGLE_PIXEL", *args)
28
29 def disable_all_patches_except(self, *args):
30 """
31 Dim Command
32 DESC in SERVICE_DESC is empty ?!
33 S:1
34 """
35 self._cmd("DISABLE_ALL_PATCHES_EXCEPT", *args)
36
37 def set_trigger_multiplicity(self, *args):
38 """
39 Dim Command
40 Setup the Multiplicity condition for physcis triggers
41 N[int]:Number of requirered coincident triggers from sum-patches (1-40)
42 S:1
43 """
44 self._cmd("SET_TRIGGER_MULTIPLICITY", *args)
45
46 def state(self):
47 """
48 Dim Service
49 Provides the state of the state machine as quality of service.
50 Text[string]:A human readable string sent by the last state change.
51 C
52 """
53 return self._get("STATE")
54
55 def set_trigger_interval(self, *args):
56 """
57 Dim Command
58 Sets the trigger interval which is the distance between two consecutive artificial triggers.
59 interval[ms]:The applied trigger interval in millisecond (min 1ms / 10bit)
60 I:1
61 """
62 self._cmd("SET_TRIGGER_INTERVAL", *args)
63
64 def enable_ftu(self, *args):
65 """
66 Dim Command
67 Enable or disable FTU
68 Board[idx]:Index of the board (0-39), -1 for all
69 Enable[bool]:Whether FTU should be enabled or disabled (yes/no)
70 I:1;B:1
71 """
72 self._cmd("ENABLE_FTU", *args)
73
74 def service_list(self):
75 """
76 Dim Service
77 Native Dim service: List of services, commands and formats
78 ServiceList[string]:For details see the Dim manual.
79 C
80 """
81 return self._get("SERVICE_LIST")
82
83 def set_calibration_multiplicity(self, *args):
84 """
85 Dim Command
86 Setup the Multiplicity condition for artificial (calibration) triggers
87 N[int]:Number of requirered coincident triggers from sum-patches (1-40)
88 S:1
89 """
90 self._cmd("SET_CALIBRATION_MULTIPLICITY", *args)
91
92 def reset_crate(self, *args):
93 """
94 Dim Command
95 Reset one of the crates 0-3
96 crate[short]:Crate number to be reseted (0-3)
97 S:1
98 """
99 self._cmd("RESET_CRATE", *args)
100
101 def reset_configure(self, *args):
102 """
103 Dim Command
104 Reset states during a configuration or in case of configuration error
105
106 """
107 self._cmd("RESET_CONFIGURE", *args)
108
109 def disable_pixel(self, *args):
110 """
111 Dim Command
112 (-1 or all)
113 S:1
114 """
115 self._cmd("DISABLE_PIXEL", *args)
116
117 def enable_veto(self, *args):
118 """
119 Dim Command
120 Enable veto line
121 Enable[bool]:Enable veto (yes/no)
122 B:1
123 """
124 self._cmd("ENABLE_VETO", *args)
125
126 def enable_pixel(self, *args):
127 """
128 Dim Command
129 (-1 or all)
130 S:1
131 """
132 self._cmd("ENABLE_PIXEL", *args)
133
134 def set_calibration_window(self, *args):
135 """
136 Dim Command
137 DESC in SERVICE_DESC is empty ?!
138 S:1
139 """
140 self._cmd("SET_CALIBRATION_WINDOW", *args)
141
142 def enable_ext1(self, *args):
143 """
144 Dim Command
145 Switch on the triggers through the first external line
146 Enable[bool]:Enable ext1 trigger (yes/no)
147 B:1
148 """
149 self._cmd("ENABLE_EXT1", *args)
150
151 def set_trigger_window(self, *args):
152 """
153 Dim Command
154 DESC in SERVICE_DESC is empty ?!
155 S:1
156 """
157 self._cmd("SET_TRIGGER_WINDOW", *args)
158
159 def service_desc(self):
160 """
161 Dim Service
162 Descriptions of services or commands and there arguments
163 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
164 C
165 """
166 return self._get("SERVICE_DESC")
167
168 def state_list(self):
169 """
170 Dim Service
171 Provides a list with descriptions for each service.
172 StateList[string]:A \n separated list of the form id:name=description
173 C
174 """
175 return self._get("STATE_LIST")
176
177 def set_threshold(self, *args):
178 """
179 Dim Command
180 Set the comparator threshold
181 Patch[idx]:Index of the patch (0-159), -1 for all
182 Threshold[counts]:Threshold to be set in binary counts
183 I:2
184 """
185 self._cmd("SET_THRESHOLD", *args)
186
187 def request_static_data(self, *args):
188 """
189 Dim Command
190 request transmission of static data from FTM to memory
191
192 """
193 self._cmd("REQUEST_STATIC_DATA", *args)
194
195 def dynamic_data(self):
196 """
197 Dim Service
198 Regular reports sent by FTM
199 FTMtimeStamp[us]:Time in microseconds, since trigger enabled or disabled
200 OnTimeCounter[us]:Ontime, i.e. FTM processes triggers (e.g. No FAD busy)
201 Temperatures[Nan]:not yet defined nor used (wanna be FTM onboard temps)
202 TriggerPatchCounter[int]:counting since last update (prescaling)
203 BoardsCounter[int]:FTU board counting after N out of 4 and since last update
204 RateOverflow[bitpattern]:bits 0-4=patches overflow, 5=board overflow, 1 per board
205 Prescaling[500ms]:Update rate of the rate counter
206 CrcError[int]:Number of checksum error in RS485 communication
207 State[int]:State value of the FTM firmware (cf. FTM doc)
208 X:1;X:1;F:4;I:160;I:40;S:40;S:40;S:40;S:1
209 """
210 return self._get("DYNAMIC_DATA")
211
212 def set_time_marker_delay(self, *args):
213 """
214 Dim Command
215 delay[int]:The applied time marker delay is: delay*4ns+8ns
216 I:1
217 """
218 self._cmd("SET_TIME_MARKER_DELAY", *args)
219
220 def configure(self, *args):
221 """
222 Dim Command
223 DESC in SERVICE_DESC is empty ?!
224 C
225 """
226 self._cmd("CONFIGURE", *args)
227
228 def reconnect(self, *args):
229 """
230 Dim Command
231 (Re)connect ethernet connection to FTM, a new address can be given
232 [host][string]:new ethernet address in the form <host:port>
233 O
234 """
235 self._cmd("RECONNECT", *args)
236
237 def enable_clock_conditioner(self, *args):
238 """
239 Dim Command
240 Enable clock conidtioner output in favor of time marker output
241 Enable[bool]:Enable clock conditioner (yes/no)
242 B:1
243 """
244 self._cmd("ENABLE_CLOCK_CONDITIONER", *args)
245
246 def take_n_events(self, *args):
247 """
248 Dim Command
249 take n events (distribute n triggers)
250 number[int]:Number of events to be taken
251 I
252 """
253 self._cmd("TAKE_N_EVENTS", *args)
254
255 def enable_group1_lpint(self, *args):
256 """
257 Dim Command
258 DESC in SERVICE_DESC is empty ?!
259 B:1
260 """
261 self._cmd("ENABLE_GROUP1_LPINT", *args)
262
263 def exit(self, *args):
264 """
265 Dim Command
266 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
267 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
268 L:1
269 """
270 self._cmd("EXIT", *args)
271
272 def trigger_rates(self):
273 """
274 Dim Service
275 Patch,Board,Camera trigger rates
276 FTMtimeStamp[us]:Time in microseconds, since trigger enabled or disabled
277 OnTimeCounter[us]:Effective on-time, ie. FTM triggers (eg. w/o busy)
278 TriggerCounter[int]:Counter of triggers since enabled or disabled
279 TriggerRate[Hz]:Trigger rate
280 BoardRate[Hz]:Trigger rate of individual FTUs
281 PatchRate[Hz]:Trigger rate of individual patches
282 ElapsedTime[sec]:Time elapsed since previous report
283 OnTime[sec]:OnTime elapsed since previous report
284 X:1;X:1;I:1;F:1;F:40;F:160;F:1;F:1
285 """
286 return self._get("TRIGGER_RATES")
287
288 def passport(self):
289 """
290 Dim Service
291 Info about the FTM and FPGA version
292 BoardId[int]:BoardId, hexCode
293 DNA[int]:DNA of the FTM board
294 X:1;S:1
295 """
296 return self._get("PASSPORT")
297
298 def set_n_out_of_4(self, *args):
299 """
300 Dim Command
301 Set the comparator threshold
302 Board[idx]:Index of the board (0-39), -1 for all
303 Threshold[counts]:Threshold to be set in binary counts
304 I:2
305 """
306 self._cmd("SET_N_OUT_OF_4", *args)
307
308 def set_intensity_lpext(self, *args):
309 """
310 Dim Command
311 DESC in SERVICE_DESC is empty ?!
312 S:1
313 """
314 self._cmd("SET_INTENSITY_LPEXT", *args)
315
316 def enable_group2_lpext(self, *args):
317 """
318 Dim Command
319 DESC in SERVICE_DESC is empty ?!
320 B:1
321 """
322 self._cmd("ENABLE_GROUP2_LPEXT", *args)
323
324 def enable_group1_lpext(self, *args):
325 """
326 Dim Command
327 DESC in SERVICE_DESC is empty ?!
328 B:1
329 """
330 self._cmd("ENABLE_GROUP1_LPEXT", *args)
331
332 def set_clock_register(self, *args):
333 """
334 Dim Command
335 DESC in SERVICE_DESC is empty ?!
336 X:8
337 """
338 self._cmd("SET_CLOCK_REGISTER", *args)
339
340 def load(self, *args):
341 """
342 Dim Command
343 Loads the static data (FTM configuration) from a file into memory and sends it to the FTM
344 filename[string]:Filename (can include a path), .bin is automatically added
345 C
346 """
347 self._cmd("LOAD", *args)
348
349 def save(self, *args):
350 """
351 Dim Command
352 Saves the static data (FTM configuration) from memory to a file
353 filename[string]:Filename (can include a path), .bin is automatically added
354 C
355 """
356 self._cmd("SAVE", *args)
357
358 def toggle_ftu(self, *args):
359 """
360 Dim Command
361 Toggle status of FTU (this is mainly meant to be used in the GUI)
362 Board[idx]:Index of the board (0-39)
363 I:1
364 """
365 self._cmd("TOGGLE_FTU", *args)
366
367 def ftu_list(self):
368 """
369 Dim Service
370 Logs the changes of status of the FTUs
371 FTMtimeStamp[us]:Time in microseconds
372 ActiveFTU[bitpattern]:Description of enabled FTUs
373 NumBoards[int]:Total number of enabled FTUs
374 NumBoardsCrate[int]:Total number of enabled FTUs per crate
375 DNA[hexCode]:Hex code identifier of FTUs
376 Addr[bitpattern]:Crate address (hardware) of FTUs
377 Ping[int]:Number of pings until FTU response
378 X:1;X:1;S:1;C:4;X:40;C:40;C:40
379 """
380 return self._get("FTU_LIST")
381
382 def client_list(self):
383 """
384 Dim Service
385 Native Dim service: A list of all connected clients
386 C
387 """
388 return self._get("CLIENT_LIST")
389
390 def set_register(self, *args):
391 """
392 Dim Command
393 set register to value
394 addr[short]:Address of register
395 val[short]:Value to be set
396 I:2
397 """
398 self._cmd("SET_REGISTER", *args)
399
400 def enable_ext2(self, *args):
401 """
402 Dim Command
403 Switch on the triggers through the second external line
404 Enable[bool]:Enable ext2 trigger (yes/no)
405 B:1
406 """
407 self._cmd("ENABLE_EXT2", *args)
408
409 def enable_group2_lpint(self, *args):
410 """
411 Dim Command
412 DESC in SERVICE_DESC is empty ?!
413 B:1
414 """
415 self._cmd("ENABLE_GROUP2_LPINT", *args)
416
417 def toggle_led(self, *args):
418 """
419 Dim Command
420 toggle led
421
422 """
423 self._cmd("TOGGLE_LED", *args)
424
425 def counter(self):
426 """
427 Dim Service
428 Communication statistics to or from FTM control and FTM
429 NumHeaders[int]:Num. of headers (any header) received by ftm control
430 NumStaticData[int]:Num. of static data blocks (ftm and ftu settings)
431 NumDynamicData[int]:Num. of dynamic data blocks (e.g. rates)
432 NumFtuList[int]:Num. of FTU list (FTU identifiers, answer from ping)
433 NumErrors[int]:Num. of error messages
434 NumRegister[int]:Num. of answers from a single register accesess
435 I:1;I:1;I:1;I:1;I:1;I:1
436 """
437 return self._get("COUNTER")
438
439 def enable_patch(self, *args):
440 """
441 Dim Command
442 DESC in SERVICE_DESC is empty ?!
443 S:1
444 """
445 self._cmd("ENABLE_PATCH", *args)
446
447 def set_dead_time(self, *args):
448 """
449 Dim Command
450 dead_time[int]:The applied dead time is: dead_time*4ns+8ns
451 I:1
452 """
453 self._cmd("SET_DEAD_TIME", *args)
454
455 def enable_trigger(self, *args):
456 """
457 Dim Command
458 Switch on the physics trigger
459 Enable[bool]:Enable physics trigger (yes/no)
460 B:1
461 """
462 self._cmd("ENABLE_TRIGGER", *args)
463
464 def set_verbose(self, *args):
465 """
466 Dim Command
467 set verbosity state
468 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
469 B
470 """
471 self._cmd("SET_VERBOSE", *args)
472
473 def message(self):
474 """
475 Dim Service
476 A general logging service providing a quality of service (severity)
477 Message[string]:The message
478 C
479 """
480 return self._get("MESSAGE")
481
482 def set_trigger_delay(self, *args):
483 """
484 Dim Command
485 delay[int]:The applied trigger delay is: delay*4ns+8ns
486 I:1
487 """
488 self._cmd("SET_TRIGGER_DELAY", *args)
489
490 def reset_camera(self, *args):
491 """
492 Dim Command
493 Reset all crates. The commands are sent in the order 0,1,2,3
494
495 """
496 self._cmd("RESET_CAMERA", *args)
497
498 def stop_trigger(self, *args):
499 """
500 Dim Command
501 stop a run (stop distributing triggers)
502
503 """
504 self._cmd("STOP_TRIGGER", *args)
505
506 def set_hex_output(self, *args):
507 """
508 Dim Command
509 enable or disable hex output for received data
510 hexout[bool]:disable or enable hex output for received data (yes/no)
511 B
512 """
513 self._cmd("SET_HEX_OUTPUT", *args)
514
515 def set_prescaling(self, *args):
516 """
517 Dim Command
518 Sets the FTU readout time intervals
519 time[0.5s]:The interval is given in units of 0.5s, i.e. 1 means 0.5s, 2 means 1s, ...
520 I:1
521 """
522 self._cmd("SET_PRESCALING", *args)
523
524 def ping(self, *args):
525 """
526 Dim Command
527 send ping
528
529 """
530 self._cmd("PING", *args)
531
532 def static_data(self):
533 """
534 Dim Service
535 Configuration of FTM and FTUs
536 FTMtimeStamp[us]:Time in microseconds, since trigger enabled or disabled
537 GeneralSettings[bitpattern]:Status of the FTM settings (cf. FTM doc)
538 LEDStatus[bitpattern]:Not Used
539 ActiveFTU[bitpattern]:List of enabled FTUs
540 TriggerInterval[bitpattern]:Period of cal. and ped. events (cf. FTM doc)
541 TriggerSeq[int]:Sequence of calib. and pedestal events (LPint, LPext, Ped)
542 LPSettings[bitpattern]:Settings of LP, enabled int, ext, intensity int, ext
543 PhysTrigMult[int]:N for N out of 40 logic on FTM (Physics)
544 CalibTrigMult[int]: N for N out of 40 logic on FTM (Calib)
545 PhysTrigWindow[ns]:Coincidence window for N out of 40 (Physics)
546 CalibTrigWindow[ns]:Coincidence window for N out of 40 (Calib)
547 TrigDelay[ns]:Trigger delay applied on FTM
548 TMDelay[ns]:TM delay applied on FTM
549 DeadTime[ns]:Dead time applied after each event on the FTM
550 ClkCond[bitpattern]:Clock conditionner settings on the FTM (DRS sampling freq.)
551 PixEnabled[bitpattern]:Enabled pixels, pckd in 90 shorts (160*9bits=180bytes)
552 PatchThresh[DACcounts]:Threshold of the trigger patches
553 Multiplicity[DACcounts]:N out of 4 logic settings per FTU
554 Prescaling[500ms]:Update rate of the rate counter
555 X:1;S:1;S:1;X:1;S:1;S:3;C:4;S:1;S:1;S:1;S:1;S:1;S:1;I:1;I:8;S:90;S:160;S:40;S:40
556 """
557 return self._get("STATIC_DATA")
558
559 def error(self):
560 """
561 Dim Service
562 DESC in SERVICE_DESC is empty ?!
563 X:1;S:1;S:28
564 """
565 return self._get("ERROR")
566
567 def start_trigger(self, *args):
568 """
569 Dim Command
570 start a run (start distributing triggers)
571
572 """
573 self._cmd("START_TRIGGER", *args)
574
575 def get_register(self, *args):
576 """
577 Dim Command
578 read register from address addr
579 addr[short]:Address of register
580 I
581 """
582 self._cmd("GET_REGISTER", *args)
583
584 def disconnect(self, *args):
585 """
586 Dim Command
587 disconnect from ethernet
588
589 """
590 self._cmd("DISCONNECT", *args)
591
592 def disable_all_pixels_except(self, *args):
593 """
594 Dim Command
595 DESC in SERVICE_DESC is empty ?!
596 S:1
597 """
598 self._cmd("DISABLE_ALL_PIXELS_EXCEPT", *args)
599
600 def set_trigger_sequence(self, *args):
601 """
602 Dim Command
603 Setup the sequence of artificial triggers produced by the FTM
604 Ped[short]:number of pedestal triggers in a row
605 LPext[short]:number of triggers of the external light pulser
606 LPint[short]:number of triggers of the internal light pulser
607 S:3
608 """
609 self._cmd("SET_TRIGGER_SEQUENCE", *args)
610
611 def set_dynamic_output(self, *args):
612 """
613 Dim Command
614 enable or disable output for received dynamic data (data is still broadcasted via Dim)
615 dynout[bool]:disable or enable output for dynamic data (yes/no)
616 B
617 """
618 self._cmd("SET_DYNAMIC_OUTPUT", *args)
619
620 def disable_patch(self, *args):
621 """
622 Dim Command
623 DESC in SERVICE_DESC is empty ?!
624 S:1
625 """
626 self._cmd("DISABLE_PATCH", *args)
627
628 def set_clock_frequency(self, *args):
629 """
630 Dim Command
631 DESC in SERVICE_DESC is empty ?!
632 S:1
633 """
634 self._cmd("SET_CLOCK_FREQUENCY", *args)
635
636 def request_dynamic_data(self, *args):
637 """
638 Dim Command
639 request transmission of dynamic data block
640
641 """
642 self._cmd("REQUEST_DYNAMIC_DATA", *args)
643
644 def set_intensity_lpint(self, *args):
645 """
646 Dim Command
647 DESC in SERVICE_DESC is empty ?!
648 S:1
649 """
650 self._cmd("SET_INTENSITY_LPINT", *args)
651
652class RATE_SCAN ( FactDimServer):
653 def process_data(self):
654 """
655 Dim Service
656 Rate scan process data
657 min[DAC]:Value at which scan was started
658 max[DAC]:Value at which scan will end
659 step[DAC]:Step size for scan
660 I:1;I:1;I:1
661 """
662 return self._get("PROCESS_DATA")
663
664 def state(self):
665 """
666 Dim Service
667 Provides the state of the state machine as quality of service.
668 Text[string]:A human readable string sent by the last state change.
669 C
670 """
671 return self._get("STATE")
672
673 def service_desc(self):
674 """
675 Dim Service
676 Descriptions of services or commands and there arguments
677 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
678 C
679 """
680 return self._get("SERVICE_DESC")
681
682 def service_list(self):
683 """
684 Dim Service
685 Native Dim service: List of services, commands and formats
686 ServiceList[string]:For details see the Dim manual.
687 C
688 """
689 return self._get("SERVICE_LIST")
690
691 def start_threshold_scan(self, *args):
692 """
693 Dim Command
694 Start rate scan for the threshold in the defined range
695 min[int]:Start value in DAC counts
696 max[int]:Limiting value in DAC counts
697 step[int]:Single step in DAC counts
698 I:3
699 """
700 self._cmd("START_THRESHOLD_SCAN", *args)
701
702 def print_cmd(self, *args):
703 """
704 Dim Command
705 DESC in SERVICE_DESC is empty ?!
706
707 """
708 self._cmd("PRINT_CMD", *args)
709
710 def client_list(self):
711 """
712 Dim Service
713 Native Dim service: A list of all connected clients
714 C
715 """
716 return self._get("CLIENT_LIST")
717
718 def set_reference_patch(self, *args):
719 """
720 Dim Command
721 Use the given patch trigger-rate as reference for the reolution
722 patch[idx]:Index of the patch (360*crate+36*board+patch)
723 I:1
724 """
725 self._cmd("SET_REFERENCE_PATCH", *args)
726
727 def exit(self, *args):
728 """
729 Dim Command
730 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
731 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
732 L:1
733 """
734 self._cmd("EXIT", *args)
735
736 def change_step_size(self, *args):
737 """
738 Dim Command
739 Change the step size during a ratescan in progress
740 step[int]:Single step in DAC counts
741 I:1
742 """
743 self._cmd("CHANGE_STEP_SIZE", *args)
744
745 def data(self):
746 """
747 Dim Service
748 Id[s]:Start time used to identify measurement (UnixTime)
749 Threshold[dac]:Threshold in DAC counts
750 ElapsedTime[s]:Real elapsed time
751 RelOnTime[ratio]:Relative on time
752 TriggerRate[Hz]:Camera trigger rate
753 BoardRate[Hz]:Board trigger rates
754 PatchRate[Hz]:Patch trigger rates
755 X:1;I:1;F:1;F:1;F:1;F:40;F:160
756 """
757 return self._get("DATA")
758
759 def stop(self, *args):
760 """
761 Dim Command
762 Stop a ratescan in progress
763
764 """
765 self._cmd("STOP", *args)
766
767 def message(self):
768 """
769 Dim Service
770 A general logging service providing a quality of service (severity)
771 Message[string]:The message
772 C
773 """
774 return self._get("MESSAGE")
775
776 def start_n_out_of_4_scan(self, *args):
777 """
778 Dim Command
779 Start rate scan for N-out-of-4 in the defined range
780 min[int]:Start value in DAC counts
781 max[int]:Limiting value in DAC counts
782 step[int]:Single step in DAC counts
783 I:3
784 """
785 self._cmd("START_N_OUT_OF_4_SCAN", *args)
786
787 def change_maximum(self, *args):
788 """
789 Dim Command
790 Change the maximum limit during a ratescan in progress
791 max[int]:Limiting value in DAC counts
792 I:1
793 """
794 self._cmd("CHANGE_MAXIMUM", *args)
795
796 def state_list(self):
797 """
798 Dim Service
799 Provides a list with descriptions for each service.
800 StateList[string]:A \n separated list of the form id:name=description
801 C
802 """
803 return self._get("STATE_LIST")
804
805 def version_number(self):
806 """
807 Dim Service
808 Native Dim service: Version number of Dim in use
809 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
810 L
811 """
812 return self._get("VERSION_NUMBER")
813
814 def set_reference_board(self, *args):
815 """
816 Dim Command
817 Use the given board trigger-rate as reference for the reolution
818 board[idx]:Index of the board (4*crate+board)
819 I:1
820 """
821 self._cmd("SET_REFERENCE_BOARD", *args)
822
823 def set_reference_camera(self, *args):
824 """
825 Dim Command
826 Use the camera trigger rate as reference for the reolution
827
828 """
829 self._cmd("SET_REFERENCE_CAMERA", *args)
830
831class RATE_CONTROL ( FactDimServer):
832 def state(self):
833 """
834 Dim Service
835 Provides the state of the state machine as quality of service.
836 Text[string]:A human readable string sent by the last state change.
837 C
838 """
839 return self._get("STATE")
840
841 def client_list(self):
842 """
843 Dim Service
844 Native Dim service: A list of all connected clients
845 C
846 """
847 return self._get("CLIENT_LIST")
848
849 def stop(self, *args):
850 """
851 Dim Command
852 Stop a calibration or ratescan in progress
853
854 """
855 self._cmd("STOP", *args)
856
857 def service_list(self):
858 """
859 Dim Service
860 Native Dim service: List of services, commands and formats
861 ServiceList[string]:For details see the Dim manual.
862 C
863 """
864 return self._get("SERVICE_LIST")
865
866 def state_list(self):
867 """
868 Dim Service
869 Provides a list with descriptions for each service.
870 StateList[string]:A \n separated list of the form id:name=description
871 C
872 """
873 return self._get("STATE_LIST")
874
875 def message(self):
876 """
877 Dim Service
878 A general logging service providing a quality of service (severity)
879 Message[string]:The message
880 C
881 """
882 return self._get("MESSAGE")
883
884 def print_cmd(self, *args):
885 """
886 Dim Command
887 Print current status
888
889 """
890 self._cmd("PRINT_CMD", *args)
891
892 def calibrate(self, *args):
893 """
894 Dim Command
895 Start a search for a reasonable minimum global threshold
896
897 """
898 self._cmd("CALIBRATE", *args)
899
900 def service_desc(self):
901 """
902 Dim Service
903 Descriptions of services or commands and there arguments
904 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
905 C
906 """
907 return self._get("SERVICE_DESC")
908
909 def set_verbose(self, *args):
910 """
911 Dim Command
912 set verbosity state
913 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
914 B
915 """
916 self._cmd("SET_VERBOSE", *args)
917
918 def set_target_rate(self, *args):
919 """
920 Dim Command
921 Set a target trigger rate for the calibration
922 F:1
923 """
924 self._cmd("SET_TARGET_RATE", *args)
925
926 def exit(self, *args):
927 """
928 Dim Command
929 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
930 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
931 L:1
932 """
933 self._cmd("EXIT", *args)
934
935 def threshold(self):
936 """
937 Dim Service
938 Resulting threshold after calibration
939 threshold[dac]:Resulting threshold from calibration
940 S:1
941 """
942 return self._get("THRESHOLD")
943
944 def set_min_threshold(self, *args):
945 """
946 Dim Command
947 Set a minimum threshold at which th rate control starts calibrating
948 I:1
949 """
950 self._cmd("SET_MIN_THRESHOLD", *args)
951
952 def version_number(self):
953 """
954 Dim Service
955 Native Dim service: Version number of Dim in use
956 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
957 L
958 """
959 return self._get("VERSION_NUMBER")
960
961class FEEDBACK ( FactDimServer):
962 def reference(self):
963 """
964 Dim Service
965 Amplitude reference value(s)Vref[mV]:Amplitude reference
966 F:416
967 """
968 return self._get("REFERENCE")
969
970 def enable_output(self, *args):
971 """
972 Dim Command
973 Enable sending of correction values caluclated by the control loop to the biasctrl
974 B:1
975 """
976 self._cmd("ENABLE_OUTPUT", *args)
977
978 def version_number(self):
979 """
980 Dim Service
981 Native Dim service: Version number of Dim in use
982 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
983 L
984 """
985 return self._get("VERSION_NUMBER")
986
987 def print_calibration(self, *args):
988 """
989 Dim Command
990 DESC in SERVICE_DESC is empty ?!
991
992 """
993 self._cmd("PRINT_CALIBRATION", *args)
994
995 def exit(self, *args):
996 """
997 Dim Command
998 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
999 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1000 L:1
1001 """
1002 self._cmd("EXIT", *args)
1003
1004 def state(self):
1005 """
1006 Dim Service
1007 Provides the state of the state machine as quality of service.
1008 Text[string]:A human readable string sent by the last state change.
1009 C
1010 """
1011 return self._get("STATE")
1012
1013 def stop(self, *args):
1014 """
1015 Dim Command
1016 Stop any control loop
1017
1018 """
1019 self._cmd("STOP", *args)
1020
1021 def start_temp_control(self, *args):
1022 """
1023 Dim Command
1024 Start the temperature control loop
1025 offset[V]:Offset from the nominal temperature corrected value in Volts
1026 F:1
1027 """
1028 self._cmd("START_TEMP_CONTROL", *args)
1029
1030 def set_kp(self, *args):
1031 """
1032 Dim Command
1033 Set proportional constant Kp
1034 D:1
1035 """
1036 self._cmd("SET_KP", *args)
1037
1038 def store_reference(self, *args):
1039 """
1040 Dim Command
1041 Store the last (averaged) value as new reference (for debug purpose only)
1042
1043 """
1044 self._cmd("STORE_REFERENCE", *args)
1045
1046 def service_desc(self):
1047 """
1048 Dim Service
1049 Descriptions of services or commands and there arguments
1050 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1051 C
1052 """
1053 return self._get("SERVICE_DESC")
1054
1055 def print_cmd(self, *args):
1056 """
1057 Dim Command
1058 DESC in SERVICE_DESC is empty ?!
1059
1060 """
1061 self._cmd("PRINT_CMD", *args)
1062
1063 def set_t(self, *args):
1064 """
1065 Dim Command
1066 Set time-constant. (-1 to use the cycle time, i.e. the time for the last average cycle, instead)
1067 D:1
1068 """
1069 self._cmd("SET_T", *args)
1070
1071 def start_feedback_control(self, *args):
1072 """
1073 Dim Command
1074 Start the feedback control loop
1075 Num[short]:Number of events 'medianed' to calculate the correction value
1076 S:1
1077 """
1078 self._cmd("START_FEEDBACK_CONTROL", *args)
1079
1080 def set_current_request_interval(self, *args):
1081 """
1082 Dim Command
1083 interval[ms]:Interval between two current requests in modes which need that.
1084
1085 """
1086 self._cmd("SET_CURRENT_REQUEST_INTERVAL", *args)
1087
1088 def set_reference(self, *args):
1089 """
1090 Dim Command
1091 Set a new global reference value (for debug purpose only)
1092 F:1
1093 """
1094 self._cmd("SET_REFERENCE", *args)
1095
1096 def start_global_feedback(self, *args):
1097 """
1098 Dim Command
1099 Start the global feedback control loopNum[short]:Number of events averaged to calculate the correction value
1100 S:1
1101 """
1102 self._cmd("START_GLOBAL_FEEDBACK", *args)
1103
1104 def deviation(self):
1105 """
1106 Dim Service
1107 Control loop information
1108 DeltaAmpl[mV]:Amplitude offset measures
1109 DeltaBias[mV]:Correction value calculated
1110 DeltaTemp[mV]:Correction calculated from temperature
1111 DeltaUser[mV]:Additional offset specified by user
1112 F:416;F:416;F:1;F:1
1113 """
1114 return self._get("DEVIATION")
1115
1116 def client_list(self):
1117 """
1118 Dim Service
1119 Native Dim service: A list of all connected clients
1120 C
1121 """
1122 return self._get("CLIENT_LIST")
1123
1124 def message(self):
1125 """
1126 Dim Service
1127 A general logging service providing a quality of service (severity)
1128 Message[string]:The message
1129 C
1130 """
1131 return self._get("MESSAGE")
1132
1133 def calibration(self):
1134 """
1135 Dim Service
1136 Current offsets
1137 Avg[uA]:Average offset
1138 Rms[uA]:Rms of offset
1139 R[Ohm]:Measured calibration resistor
1140 F:416;F:416;F:416
1141 """
1142 return self._get("CALIBRATION")
1143
1144 def set_kd(self, *args):
1145 """
1146 Dim Command
1147 Set derivative constant Kd
1148 D:1
1149 """
1150 self._cmd("SET_KD", *args)
1151
1152 def set_ki(self, *args):
1153 """
1154 Dim Command
1155 Set integral constant Ki
1156 D:1
1157 """
1158 self._cmd("SET_KI", *args)
1159
1160 def start_current_control(self, *args):
1161 """
1162 Dim Command
1163 Start the current/temperature control loop
1164 offset[V]:Offset from the nominal current/temperature corrected value in Volts
1165 F:1
1166 """
1167 self._cmd("START_CURRENT_CONTROL", *args)
1168
1169 def calibrate_currents(self, *args):
1170 """
1171 Dim Command
1172 DESC in SERVICE_DESC is empty ?!
1173
1174 """
1175 self._cmd("CALIBRATE_CURRENTS", *args)
1176
1177 def state_list(self):
1178 """
1179 Dim Service
1180 Provides a list with descriptions for each service.
1181 StateList[string]:A \n separated list of the form id:name=description
1182 C
1183 """
1184 return self._get("STATE_LIST")
1185
1186 def service_list(self):
1187 """
1188 Dim Service
1189 Native Dim service: List of services, commands and formats
1190 ServiceList[string]:For details see the Dim manual.
1191 C
1192 """
1193 return self._get("SERVICE_LIST")
1194
1195class LID_CONTROL ( FactDimServer):
1196 def data(self):
1197 """
1198 Dim Service
1199 status[bool]:Lid1/2 open or closed
1200 I[A]:Lid1/2 current
1201 P[dac]:Lid1/2 hall sensor position in averaged dac counts
1202 S:2;F:2;F:2
1203 """
1204 return self._get("DATA")
1205
1206 def close(self, *args):
1207 """
1208 Dim Command
1209 Close the lids
1210
1211 """
1212 self._cmd("CLOSE", *args)
1213
1214 def post(self, *args):
1215 """
1216 Dim Command
1217 set verbosity state
1218 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1219 C
1220 """
1221 self._cmd("POST", *args)
1222
1223 def exit(self, *args):
1224 """
1225 Dim Command
1226 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1227 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1228 L:1
1229 """
1230 self._cmd("EXIT", *args)
1231
1232 def service_desc(self):
1233 """
1234 Dim Service
1235 Descriptions of services or commands and there arguments
1236 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1237 C
1238 """
1239 return self._get("SERVICE_DESC")
1240
1241 def version_number(self):
1242 """
1243 Dim Service
1244 Native Dim service: Version number of Dim in use
1245 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1246 L
1247 """
1248 return self._get("VERSION_NUMBER")
1249
1250 def state_list(self):
1251 """
1252 Dim Service
1253 Provides a list with descriptions for each service.
1254 StateList[string]:A \n separated list of the form id:name=description
1255 C
1256 """
1257 return self._get("STATE_LIST")
1258
1259 def open(self, *args):
1260 """
1261 Dim Command
1262 Open the lids
1263
1264 """
1265 self._cmd("OPEN", *args)
1266
1267 def service_list(self):
1268 """
1269 Dim Service
1270 Native Dim service: List of services, commands and formats
1271 ServiceList[string]:For details see the Dim manual.
1272 C
1273 """
1274 return self._get("SERVICE_LIST")
1275
1276 def message(self):
1277 """
1278 Dim Service
1279 A general logging service providing a quality of service (severity)
1280 Message[string]:The message
1281 C
1282 """
1283 return self._get("MESSAGE")
1284
1285 def client_list(self):
1286 """
1287 Dim Service
1288 Native Dim service: A list of all connected clients
1289 C
1290 """
1291 return self._get("CLIENT_LIST")
1292
1293 def set_verbose(self, *args):
1294 """
1295 Dim Command
1296 set verbosity state
1297 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1298 B
1299 """
1300 self._cmd("SET_VERBOSE", *args)
1301
1302 def state(self):
1303 """
1304 Dim Service
1305 Provides the state of the state machine as quality of service.
1306 Text[string]:A human readable string sent by the last state change.
1307 C
1308 """
1309 return self._get("STATE")
1310
1311class FSC_CONTROL ( FactDimServer):
1312 def state_list(self):
1313 """
1314 Dim Service
1315 Provides a list with descriptions for each service.
1316 StateList[string]:A \n separated list of the form id:name=description
1317 C
1318 """
1319 return self._get("STATE_LIST")
1320
1321 def state(self):
1322 """
1323 Dim Service
1324 Provides the state of the state machine as quality of service.
1325 Text[string]:A human readable string sent by the last state change.
1326 C
1327 """
1328 return self._get("STATE")
1329
1330 def exit(self, *args):
1331 """
1332 Dim Command
1333 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1334 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1335 L:1
1336 """
1337 self._cmd("EXIT", *args)
1338
1339 def voltage(self):
1340 """
1341 Dim Service
1342 t[s]:FSC uptime
1343 FAD_Ud[V]:FAD digital (crate 0-3)
1344 FAD_Up[V]:FAD positive (crate 0-3)
1345 FAD_Un[V]:FAD negative (crate 0-3)
1346 FPA_Ud[V]:FPA digital (crate 0-3)
1347 FPA_Up[V]:FPA positive (crate 0-3)
1348 FPA_Un[V]:FPA negative (crate 0-3)
1349 ETH_U[V]:Ethernet switch (pos/neg)
1350 FTM_U[V]:FTM - trigger master (pos/neg)
1351 FFC_U[V]:FFC
1352 FLP_U[V]:FLP - light pulser
1353 F:1;F:4;F:4;F:4;F:4;F:4;F:4;F:2;F:2;F:1;F:1
1354 """
1355 return self._get("VOLTAGE")
1356
1357 def current(self):
1358 """
1359 Dim Service
1360 t[s]:FSC uptime
1361 FAD_Id[A]:FAD digital (crate 0-3)
1362 FAD_Ip[A]:FAD positive (crate 0-3)
1363 FAD_In[A]:FAD negative (crate 0-3)
1364 FPA_Id[A]:FPA digital (crate 0-3)
1365 FPA_Ip[A]:FPA positive (crate 0-3)
1366 FPA_In[A]:FPA negative (crate 0-3)
1367 ETH_I[A]:Ethernet switch (pos/neg)
1368 FTM_I[A]:FTM - trigger master (pos/neg)
1369 FFC_I[A]:FFC
1370 FLP_I[A]:FLP - light pulser
1371 F:1;F:4;F:4;F:4;F:4;F:4;F:4;F:2;F:2;F:1;F:1
1372 """
1373 return self._get("CURRENT")
1374
1375 def client_list(self):
1376 """
1377 Dim Service
1378 Native Dim service: A list of all connected clients
1379 C
1380 """
1381 return self._get("CLIENT_LIST")
1382
1383 def service_list(self):
1384 """
1385 Dim Service
1386 Native Dim service: List of services, commands and formats
1387 ServiceList[string]:For details see the Dim manual.
1388 C
1389 """
1390 return self._get("SERVICE_LIST")
1391
1392 def service_desc(self):
1393 """
1394 Dim Service
1395 Descriptions of services or commands and there arguments
1396 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1397 C
1398 """
1399 return self._get("SERVICE_DESC")
1400
1401 def version_number(self):
1402 """
1403 Dim Service
1404 Native Dim service: Version number of Dim in use
1405 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1406 L
1407 """
1408 return self._get("VERSION_NUMBER")
1409
1410 def disconnect(self, *args):
1411 """
1412 Dim Command
1413 disconnect from ethernet
1414
1415 """
1416 self._cmd("DISCONNECT", *args)
1417
1418 def dump_stream(self, *args):
1419 """
1420 Dim Command
1421 DESC in SERVICE_DESC is empty ?!
1422 B:1
1423 """
1424 self._cmd("DUMP_STREAM", *args)
1425
1426 def humidity(self):
1427 """
1428 Dim Service
1429 t[s]:FSC uptime
1430 H[%]:Humidity sensors readout
1431 F:1;F:4
1432 """
1433 return self._get("HUMIDITY")
1434
1435 def temperature(self):
1436 """
1437 Dim Service
1438 t[s]:FSC uptime
1439 T_sens[deg C]:Sensor compartment temperatures
1440 T_crate[deg C]:Temperatures crate 0 (back/front), 1 (b/f), 2 (b/f), 3 (b/f)
1441 T_ps[deg C]:Temp power supplies crate 0 (back/front), 1, 2, 3
1442 T_aux[deg C]:Auxiliary power supply temperatures FTM (top/bottom), FSC (t/b)
1443 T_back[deg C]:FTM backpanel temperatures FTM (top/bottom), FSC (top/bottom)
1444 T_eth[deg C]:Ethernet switches temperatures top (front/back), bottom (f/b)
1445 F:1;F:31;F:8;F:8;F:4;F:4;F:4
1446 """
1447 return self._get("TEMPERATURE")
1448
1449 def set_verbose(self, *args):
1450 """
1451 Dim Command
1452 set verbosity state
1453 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1454 B:1
1455 """
1456 self._cmd("SET_VERBOSE", *args)
1457
1458 def reconnect(self, *args):
1459 """
1460 Dim Command
1461 (Re)connect ethernet connection to FTM, a new address can be given
1462 [host][string]:new ethernet address in the form <host:port>
1463 O
1464 """
1465 self._cmd("RECONNECT", *args)
1466
1467 def message(self):
1468 """
1469 Dim Service
1470 A general logging service providing a quality of service (severity)
1471 Message[string]:The message
1472 C
1473 """
1474 return self._get("MESSAGE")
1475
1476class PWR_CONTROL ( FactDimServer):
1477 def set_verbose(self, *args):
1478 """
1479 Dim Command
1480 Set verbosity state
1481 verbosity[bool]:disable or enable verbosity for interpreted data (yes/no)
1482 B:1
1483 """
1484 self._cmd("SET_VERBOSE", *args)
1485
1486 def camera_power(self, *args):
1487 """
1488 Dim Command
1489 Switch camera power
1490 power[bool]:Switch camera power 'on' or 'off'
1491 B:1
1492 """
1493 self._cmd("CAMERA_POWER", *args)
1494
1495 def set_debug_rx(self, *args):
1496 """
1497 Dim Command
1498 Set debux-rx state
1499 debug[bool]:dump received text and parsed text to console (yes/no)
1500 B:1
1501 """
1502 self._cmd("SET_DEBUG_RX", *args)
1503
1504 def version_number(self):
1505 """
1506 Dim Service
1507 Native Dim service: Version number of Dim in use
1508 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1509 L
1510 """
1511 return self._get("VERSION_NUMBER")
1512
1513 def service_desc(self):
1514 """
1515 Dim Service
1516 Descriptions of services or commands and there arguments
1517 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1518 C
1519 """
1520 return self._get("SERVICE_DESC")
1521
1522 def exit(self, *args):
1523 """
1524 Dim Command
1525 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1526 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1527 L:1
1528 """
1529 self._cmd("EXIT", *args)
1530
1531 def toggle_drive(self, *args):
1532 """
1533 Dim Command
1534 Toggle drive power
1535
1536 """
1537 self._cmd("TOGGLE_DRIVE", *args)
1538
1539 def state(self):
1540 """
1541 Dim Service
1542 Provides the state of the state machine as quality of service.
1543 Text[string]:A human readable string sent by the last state change.
1544 C
1545 """
1546 return self._get("STATE")
1547
1548 def client_list(self):
1549 """
1550 Dim Service
1551 Native Dim service: A list of all connected clients
1552 C
1553 """
1554 return self._get("CLIENT_LIST")
1555
1556 def data(self):
1557 """
1558 Dim Service
1559 water_lvl[bool]:Water level ok
1560 water_flow[bool]:Water flowing
1561 pwr_24V[bool]:24V power enabled
1562 pwr_pump[bool]:Pump power enabled
1563 pwr_bias[bool]:Bias power enabled
1564 pwr_drive[bool]:Drive power enabled (command value)
1565 main_drive[bool]:Drive manual main switch on
1566 feedback_drive[bool]:Drive power on (feedback value)
1567 C:1;C:1;C:1;C:1;C:1;C:1;C:1;C:1
1568 """
1569 return self._get("DATA")
1570
1571 def service_list(self):
1572 """
1573 Dim Service
1574 Native Dim service: List of services, commands and formats
1575 ServiceList[string]:For details see the Dim manual.
1576 C
1577 """
1578 return self._get("SERVICE_LIST")
1579
1580 def post(self, *args):
1581 """
1582 Dim Command
1583 set verbosity state
1584 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1585 C
1586 """
1587 self._cmd("POST", *args)
1588
1589 def message(self):
1590 """
1591 Dim Service
1592 A general logging service providing a quality of service (severity)
1593 Message[string]:The message
1594 C
1595 """
1596 return self._get("MESSAGE")
1597
1598 def state_list(self):
1599 """
1600 Dim Service
1601 Provides a list with descriptions for each service.
1602 StateList[string]:A \n separated list of the form id:name=description
1603 C
1604 """
1605 return self._get("STATE_LIST")
1606
1607class DATA_LOGGER ( FactDimServer):
1608 def filename_run(self):
1609 """
1610 Dim Service
1611 Path and base name used for the run files.
1612 Type[int]:type of open files (1=log, 2=rep, 4=fits)
1613 Name[string]:path and base file name
1614 I:1;C
1615 """
1616 return self._get("FILENAME_RUN")
1617
1618 def stop(self, *args):
1619 """
1620 Dim Command
1621 Stop all data logging, close all files.
1622
1623 """
1624 self._cmd("STOP", *args)
1625
1626 def message(self):
1627 """
1628 Dim Service
1629 A general logging service providing a quality of service (severity)
1630 Message[string]:The message
1631 C
1632 """
1633 return self._get("MESSAGE")
1634
1635 def enable_numsubs_service(self, *args):
1636 """
1637 Dim Command
1638 Switch the service which distributes information about the number of subscriptions and open files on or off.
1639 Enable[bool]:Enable of disable NUM_SUBS service (yes/no).
1640 B:1
1641 """
1642 self._cmd("ENABLE_NUMSUBS_SERVICE", *args)
1643
1644 def enable_filename_services(self, *args):
1645 """
1646 Dim Command
1647 Switch service which distributes information about the open files on or off.
1648 Enable[bool]:Enable of disable filename services (yes/no).
1649 B:1
1650 """
1651 self._cmd("ENABLE_FILENAME_SERVICES", *args)
1652
1653 def exit(self, *args):
1654 """
1655 Dim Command
1656 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1657 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1658 L:1
1659 """
1660 self._cmd("EXIT", *args)
1661
1662 def set_run_timeout(self, *args):
1663 """
1664 Dim Command
1665 Set the timeout delay for old run numbers.
1666 timeout[min]:Time out in minutes after which files for expired runs are closed.
1667 L:1
1668 """
1669 self._cmd("SET_RUN_TIMEOUT", *args)
1670
1671 def num_subs(self):
1672 """
1673 Dim Service
1674 Num. open files + num. subscribed services
1675 NSubAndOpenFiles[int]:Num. of subs and open files
1676 I:2
1677 """
1678 return self._get("NUM_SUBS")
1679
1680 def service_desc(self):
1681 """
1682 Dim Service
1683 Descriptions of services or commands and there arguments
1684 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1685 C
1686 """
1687 return self._get("SERVICE_DESC")
1688
1689 def set_statistics_update_interval(self, *args):
1690 """
1691 Dim Command
1692 Interval in which the data-logger statistics service (STATS) is updated.
1693 Interval[ms]:Value in milliseconds (<=0: no update).
1694 S:1
1695 """
1696 self._cmd("SET_STATISTICS_UPDATE_INTERVAL", *args)
1697
1698 def version_number(self):
1699 """
1700 Dim Service
1701 Native Dim service: Version number of Dim in use
1702 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1703 L
1704 """
1705 return self._get("VERSION_NUMBER")
1706
1707 def client_list(self):
1708 """
1709 Dim Service
1710 Native Dim service: A list of all connected clients
1711 C
1712 """
1713 return self._get("CLIENT_LIST")
1714
1715 def set_debug_mode(self, *args):
1716 """
1717 Dim Command
1718 Switch debug mode on or off. Debug mode prints information about every service written to a file.
1719 Enable[bool]:Enable of disable debug mode (yes/no).
1720 B:1
1721 """
1722 self._cmd("SET_DEBUG_MODE", *args)
1723
1724 def print_info(self, *args):
1725 """
1726 Dim Command
1727 Print information about the internal status of the data logger.
1728
1729 """
1730 self._cmd("PRINT_INFO", *args)
1731
1732 def start(self, *args):
1733 """
1734 Dim Command
1735 Start the nightly logging. Nightly file location must be specified already
1736
1737 """
1738 self._cmd("START", *args)
1739
1740 def stop_run_logging(self, *args):
1741 """
1742 Dim Command
1743 Go from the wait for run to nightly open state.
1744
1745 """
1746 self._cmd("STOP_RUN_LOGGING", *args)
1747
1748 def service_list(self):
1749 """
1750 Dim Service
1751 Native Dim service: List of services, commands and formats
1752 ServiceList[string]:For details see the Dim manual.
1753 C
1754 """
1755 return self._get("SERVICE_LIST")
1756
1757 def stats(self):
1758 """
1759 Dim Service
1760 Statistics about size written
1761 X:4
1762 """
1763 return self._get("STATS")
1764
1765 def reset(self, *args):
1766 """
1767 Dim Command
1768 Transition to exit error states. Closes the any open file.
1769
1770 """
1771 self._cmd("RESET", *args)
1772
1773 def start_run_logging(self, *args):
1774 """
1775 Dim Command
1776 Go to waiting for run number state. In this state with any received run-number a new file is opened.
1777
1778 """
1779 self._cmd("START_RUN_LOGGING", *args)
1780
1781 def state_list(self):
1782 """
1783 Dim Service
1784 Provides a list with descriptions for each service.
1785 StateList[string]:A \n separated list of the form id:name=description
1786 C
1787 """
1788 return self._get("STATE_LIST")
1789
1790 def state(self):
1791 """
1792 Dim Service
1793 Provides the state of the state machine as quality of service.
1794 Text[string]:A human readable string sent by the last state change.
1795 C
1796 """
1797 return self._get("STATE")
1798
1799 def filename_nightly(self):
1800 """
1801 Dim Service
1802 Path and base name used for the nightly files.
1803 Type[int]:type of open files (1=log, 2=rep, 4=fits)
1804 Name[string]:path and base file name
1805 I:1;C
1806 """
1807 return self._get("FILENAME_NIGHTLY")
1808
1809class TNG_WEATHER ( FactDimServer):
1810 def set_verbose(self, *args):
1811 """
1812 Dim Command
1813 set verbosity state
1814 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1815 B
1816 """
1817 self._cmd("SET_VERBOSE", *args)
1818
1819 def state(self):
1820 """
1821 Dim Service
1822 Provides the state of the state machine as quality of service.
1823 Text[string]:A human readable string sent by the last state change.
1824 C
1825 """
1826 return self._get("STATE")
1827
1828 def state_list(self):
1829 """
1830 Dim Service
1831 Provides a list with descriptions for each service.
1832 StateList[string]:A \n separated list of the form id:name=description
1833 C
1834 """
1835 return self._get("STATE_LIST")
1836
1837 def version_number(self):
1838 """
1839 Dim Service
1840 Native Dim service: Version number of Dim in use
1841 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1842 L
1843 """
1844 return self._get("VERSION_NUMBER")
1845
1846 def dust(self):
1847 """
1848 Dim Service
1849 Dust[ug/m^3]:Dust (total)
1850 F:1
1851 """
1852 return self._get("DUST")
1853
1854 def service_desc(self):
1855 """
1856 Dim Service
1857 Descriptions of services or commands and there arguments
1858 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1859 C
1860 """
1861 return self._get("SERVICE_DESC")
1862
1863 def client_list(self):
1864 """
1865 Dim Service
1866 Native Dim service: A list of all connected clients
1867 C
1868 """
1869 return self._get("CLIENT_LIST")
1870
1871 def message(self):
1872 """
1873 Dim Service
1874 A general logging service providing a quality of service (severity)
1875 Message[string]:The message
1876 C
1877 """
1878 return self._get("MESSAGE")
1879
1880 def data(self):
1881 """
1882 Dim Service
1883 T_10M[deg C]:Temperature 10m above ground
1884 T_5M[deg C]:Temperature 5m above ground
1885 T_2M[deg C]:Temperature 2m above ground
1886 T_0[deg C]:Temperature at ground
1887 T_dew[deg C]:Dew point
1888 H[%]:Humidity
1889 P[mbar]:Air pressure
1890 v[km/h]:Wind speed
1891 d[deg]:Wind direction (N-E)
1892 DeltaM1
1893 Dust[ug/m^3]:Dust (total)
1894 Seeing[W/m^2]:Seeing
1895 F:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1
1896 """
1897 return self._get("DATA")
1898
1899 def service_list(self):
1900 """
1901 Dim Service
1902 Native Dim service: List of services, commands and formats
1903 ServiceList[string]:For details see the Dim manual.
1904 C
1905 """
1906 return self._get("SERVICE_LIST")
1907
1908 def exit(self, *args):
1909 """
1910 Dim Command
1911 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1912 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1913 L:1
1914 """
1915 self._cmd("EXIT", *args)
1916
1917class MAGIC_LIDAR ( FactDimServer):
1918 def client_list(self):
1919 """
1920 Dim Service
1921 Native Dim service: A list of all connected clients
1922 C
1923 """
1924 return self._get("CLIENT_LIST")
1925
1926 def data(self):
1927 """
1928 Dim Service
1929 Zd[deg]:Pointing direction zenith distance
1930 Az[deg]:Pointing direction azimuth
1931 CHE[km]:Cloud height
1932 COT[1]:Cloud optical transparency at 532nm
1933 PBL[100]:Planetary boundary layer normalized to 100 for clear nights
1934 F:1;F:1;F:1;F:1;F:1
1935 """
1936 return self._get("DATA")
1937
1938 def service_list(self):
1939 """
1940 Dim Service
1941 Native Dim service: List of services, commands and formats
1942 ServiceList[string]:For details see the Dim manual.
1943 C
1944 """
1945 return self._get("SERVICE_LIST")
1946
1947 def state(self):
1948 """
1949 Dim Service
1950 Provides the state of the state machine as quality of service.
1951 Text[string]:A human readable string sent by the last state change.
1952 C
1953 """
1954 return self._get("STATE")
1955
1956 def set_verbose(self, *args):
1957 """
1958 Dim Command
1959 set verbosity state
1960 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
1961 B
1962 """
1963 self._cmd("SET_VERBOSE", *args)
1964
1965 def exit(self, *args):
1966 """
1967 Dim Command
1968 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
1969 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
1970 L:1
1971 """
1972 self._cmd("EXIT", *args)
1973
1974 def version_number(self):
1975 """
1976 Dim Service
1977 Native Dim service: Version number of Dim in use
1978 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
1979 L
1980 """
1981 return self._get("VERSION_NUMBER")
1982
1983 def message(self):
1984 """
1985 Dim Service
1986 A general logging service providing a quality of service (severity)
1987 Message[string]:The message
1988 C
1989 """
1990 return self._get("MESSAGE")
1991
1992 def service_desc(self):
1993 """
1994 Dim Service
1995 Descriptions of services or commands and there arguments
1996 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
1997 C
1998 """
1999 return self._get("SERVICE_DESC")
2000
2001 def state_list(self):
2002 """
2003 Dim Service
2004 Provides a list with descriptions for each service.
2005 StateList[string]:A \n separated list of the form id:name=description
2006 C
2007 """
2008 return self._get("STATE_LIST")
2009
2010class AGILENT_CONTROL ( FactDimServer):
2011 def service_list(self):
2012 """
2013 Dim Service
2014 Native Dim service: List of services, commands and formats
2015 ServiceList[string]:For details see the Dim manual.
2016 C
2017 """
2018 return self._get("SERVICE_LIST")
2019
2020 def set_verbose(self, *args):
2021 """
2022 Dim Command
2023 set verbosity state
2024 verbosity[bool]:disable or enable verbosity for received data (yes/no)
2025 B:1
2026 """
2027 self._cmd("SET_VERBOSE", *args)
2028
2029 def set_power(self, *args):
2030 """
2031 Dim Command
2032 Enable or disable power output
2033 output[bool]:set power output to 'on' or 'off'
2034 B:1
2035 """
2036 self._cmd("SET_POWER", *args)
2037
2038 def service_desc(self):
2039 """
2040 Dim Service
2041 Descriptions of services or commands and there arguments
2042 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
2043 C
2044 """
2045 return self._get("SERVICE_DESC")
2046
2047 def power_cycle(self, *args):
2048 """
2049 Dim Command
2050 Power cycle the power output
2051 delay[short]:Defines the delay between switching off and on.
2052 S:1
2053 """
2054 self._cmd("POWER_CYCLE", *args)
2055
2056 def version_number(self):
2057 """
2058 Dim Service
2059 Native Dim service: Version number of Dim in use
2060 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
2061 L
2062 """
2063 return self._get("VERSION_NUMBER")
2064
2065 def reconnect(self, *args):
2066 """
2067 Dim Command
2068 (Re)connect ethernet connection to Agilent, a new address can be given
2069 [host][string]:new ethernet address in the form <host:port>
2070 O
2071 """
2072 self._cmd("RECONNECT", *args)
2073
2074 def set_debug_rx(self, *args):
2075 """
2076 Dim Command
2077 set debug state
2078 debug[bool]:disable or enable verbosity for received raw data (yes/no)
2079 B:1
2080 """
2081 self._cmd("SET_DEBUG_RX", *args)
2082
2083 def message(self):
2084 """
2085 Dim Service
2086 A general logging service providing a quality of service (severity)
2087 Message[string]:The message
2088 C
2089 """
2090 return self._get("MESSAGE")
2091
2092 def state(self):
2093 """
2094 Dim Service
2095 Provides the state of the state machine as quality of service.
2096 Text[string]:A human readable string sent by the last state change.
2097 C
2098 """
2099 return self._get("STATE")
2100
2101 def client_list(self):
2102 """
2103 Dim Service
2104 Native Dim service: A list of all connected clients
2105 C
2106 """
2107 return self._get("CLIENT_LIST")
2108
2109 def disconnect(self, *args):
2110 """
2111 Dim Command
2112 disconnect from ethernet
2113
2114 """
2115 self._cmd("DISCONNECT", *args)
2116
2117 def data(self):
2118 """
2119 Dim Service
2120 U_nom[V]: Nominal output voltage
2121 U_mes[V]: Measured output voltage
2122 I_mes[A]: Measured current
2123 I_max[A]: Current limit
2124 F:1;F:1;F:1;F:1
2125 """
2126 return self._get("DATA")
2127
2128 def state_list(self):
2129 """
2130 Dim Service
2131 Provides a list with descriptions for each service.
2132 StateList[string]:A \n separated list of the form id:name=description
2133 C
2134 """
2135 return self._get("STATE_LIST")
2136
2137 def exit(self, *args):
2138 """
2139 Dim Command
2140 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
2141 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
2142 L:1
2143 """
2144 self._cmd("EXIT", *args)
2145
2146class FAD_CONTROL ( FactDimServer):
2147 def version_number(self):
2148 """
2149 Dim Service
2150 Native Dim service: Version number of Dim in use
2151 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
2152 L
2153 """
2154 return self._get("VERSION_NUMBER")
2155
2156 def state_list(self):
2157 """
2158 Dim Service
2159 Provides a list with descriptions for each service.
2160 StateList[string]:A \n separated list of the form id:name=description
2161 C
2162 """
2163 return self._get("STATE_LIST")
2164
2165 def enable_continous_trigger(self, *args):
2166 """
2167 Dim Command
2168 Enable continous (internal) trigger.
2169 B:1
2170 """
2171 self._cmd("ENABLE_CONTINOUS_TRIGGER", *args)
2172
2173 def event_data(self):
2174 """
2175 Dim Service
2176 DESC in SERVICE_DESC is empty ?!
2177 F:1440;F:1440;F:1440;F:1440
2178 """
2179 return self._get("EVENT_DATA")
2180
2181 def print_event(self, *args):
2182 """
2183 Dim Command
2184 Print (last) event
2185 board[short]:slot from which the event should be printed (-1 for all)
2186 S:1
2187 """
2188 self._cmd("PRINT_EVENT", *args)
2189
2190 def block_transmission(self, *args):
2191 """
2192 Dim Command
2193 Blocks the transmission of commands to the given slot. Use with care! For debugging pupose only!
2194 slot[short]:Slot to which the command transmission should be blocked (0-39)
2195 enable[bool]:Whether the command transmission should be blockes (yes) or allowed (no)
2196 S:1;B:1
2197 """
2198 self._cmd("BLOCK_TRANSMISSION", *args)
2199
2200 def set_debug_tx(self, *args):
2201 """
2202 Dim Command
2203 Enable or disable the output of messages in case of successfull data transmission to the boards.
2204 debug[bool]:disable or enable debug output for transmitted data (yes/no)
2205 B:1
2206 """
2207 self._cmd("SET_DEBUG_TX", *args)
2208
2209 def dac(self):
2210 """
2211 Dim Service
2212 DAC settings of each FAD board
2213 DAC[int]:DAC counts, sequentially DAC 0 board 0, 0/1, 0/2... (plus min max)
2214 S:336
2215 """
2216 return self._get("DAC")
2217
2218 def status(self):
2219 """
2220 Dim Service
2221 Status of FAD boards
2222 status[bitpattern]:Status of each FAD board. Maybe buggy
2223 S:42
2224 """
2225 return self._get("STATUS")
2226
2227 def disconnect(self, *args):
2228 """
2229 Dim Command
2230 Disconnect a connected slot.
2231 S:1
2232 """
2233 self._cmd("DISCONNECT", *args)
2234
2235 def set_max_memory(self, *args):
2236 """
2237 Dim Command
2238 Set maximum memory buffer size allowed to be consumed by the EventBuilder to buffer events.
2239 memory[short]:Buffer size in Mega-bytes.
2240 S:1
2241 """
2242 self._cmd("SET_MAX_MEMORY", *args)
2243
2244 def firmware_version(self):
2245 """
2246 Dim Service
2247 Firmware version number of fad boards
2248 firmware[float]:Version number of firmware, for each board. 40=min, 41=max
2249 F:42
2250 """
2251 return self._get("FIRMWARE_VERSION")
2252
2253 def load_drs_calibration(self, *args):
2254 """
2255 Dim Command
2256 Load a DRS calibration file
2257 absolute path
2258 C
2259 """
2260 self._cmd("LOAD_DRS_CALIBRATION", *args)
2261
2262 def add_address(self, *args):
2263 """
2264 Dim Command
2265 Add the address of a DRS4 board to the first free slot
2266 IP[string]:address in the format <address:port>
2267 C
2268 """
2269 self._cmd("ADD_ADDRESS", *args)
2270
2271 def drs_runs(self):
2272 """
2273 Dim Service
2274 DESC in SERVICE_DESC is empty ?!
2275 I:1;I:3
2276 """
2277 return self._get("DRS_RUNS")
2278
2279 def enable_trigger_line(self, *args):
2280 """
2281 Dim Command
2282 Incoming triggers can be accepted/will not be accepted
2283 B:1
2284 """
2285 self._cmd("ENABLE_TRIGGER_LINE", *args)
2286
2287 def enable_dwrite(self, *args):
2288 """
2289 Dim Command
2290 Set Dwrite (possibly high / always low)
2291 B:1
2292 """
2293 self._cmd("ENABLE_DWRITE", *args)
2294
2295 def feedback_data(self):
2296 """
2297 Dim Service
2298 DESC in SERVICE_DESC is empty ?!
2299 F:1440
2300 """
2301 return self._get("FEEDBACK_DATA")
2302
2303 def set_file_format(self, *args):
2304 """
2305 Dim Command
2306 DESC in SERVICE_DESC is empty ?!
2307 S:1
2308 """
2309 self._cmd("SET_FILE_FORMAT", *args)
2310
2311 def reference_clock(self):
2312 """
2313 Dim Service
2314 Reference clock of FAD boards
2315 refClocks[t]:ref clocks of FAD boards. 40=min, 41=max
2316 I:42
2317 """
2318 return self._get("REFERENCE_CLOCK")
2319
2320 def phase_shift(self, *args):
2321 """
2322 Dim Command
2323 Adjust ADC phase (in 'steps')
2324 phase[short]
2325 S:1
2326 """
2327 self._cmd("PHASE_SHIFT", *args)
2328
2329 def enable_busy_off(self, *args):
2330 """
2331 Dim Command
2332 Set BUSY continously low
2333 B:1
2334 """
2335 self._cmd("ENABLE_BUSY_OFF", *args)
2336
2337 def set_data_output(self, *args):
2338 """
2339 Dim Command
2340 Enable or disable printing of the received adc data to the console
2341 dataout[bool]:disable or enable data output for received data (yes/no)
2342 B:1
2343 """
2344 self._cmd("SET_DATA_OUTPUT", *args)
2345
2346 def block_transmission_range(self, *args):
2347 """
2348 Dim Command
2349 Blocks the transmission of commands to the given range of slots. Use with care! For debugging pupose only!
2350 first[short]:First slot to which the command transmission should be blocked (0-39)
2351 last[short]:Last slot to which the command transmission should be blocked (0-39)
2352 enable[bool]:Whether the command transmission should be blockes (yes) or allowed (no)
2353 S:2;B:1
2354 """
2355 self._cmd("BLOCK_TRANSMISSION_RANGE", *args)
2356
2357 def events(self):
2358 """
2359 Dim Service
2360 Event counts
2361 evtsCount[int]:Num evts cur. run, total (all run), evt ID, trig. Num
2362 I:4
2363 """
2364 return self._get("EVENTS")
2365
2366 def ignore_events_range(self, *args):
2367 """
2368 Dim Command
2369 Instructs the event-builder to ignore events from the given slot but still read the data from the socket.
2370 first[short]:First slot from which the data should be ignored when building events
2371 last[short]:Last slot from which the data should be ignored when building events
2372 enable[bool]:Whether the event builder should ignore data from this slot (yes) or allowed (no)
2373 S:2;B:1
2374 """
2375 self._cmd("IGNORE_EVENTS_RANGE", *args)
2376
2377 def send_data(self, *args):
2378 """
2379 Dim Command
2380 Send a command with data to the FADs. Values between 0 and 0xffff are allowed.
2381 command[uint16]:Command to be transmittted.
2382 data[uint16]:Data to be sent with the command.
2383 I:2
2384 """
2385 self._cmd("SEND_DATA", *args)
2386
2387 def abort(self, *args):
2388 """
2389 Dim Command
2390 Immediately abort EventBuilder thread and disconnect all slots.
2391
2392 """
2393 self._cmd("ABORT", *args)
2394
2395 def reset_event_counter(self, *args):
2396 """
2397 Dim Command
2398 Reset the FAD boards' event counter to 0.
2399
2400 """
2401 self._cmd("RESET_EVENT_COUNTER", *args)
2402
2403 def set_hex_output(self, *args):
2404 """
2405 Dim Command
2406 Enable or disable hex output for received data
2407 hexout[bool]:disable or enable hex output for received data (yes/no)
2408 B:1
2409 """
2410 self._cmd("SET_HEX_OUTPUT", *args)
2411
2412 def statistics1(self):
2413 """
2414 Dim Service
2415 Event Builder status for GUI display
2416 threadInfo[int]:Number of read, proc and writes
2417 bufferInfo[int]:Events in buffer, incomp., comp., tot., max past cycle, total
2418 memInfo[int]:total buf. mem, used mem, max used, max past cycle
2419 EvtCnt[int]:Number of events skipped, written, with errors
2420 badRoi[int]:Num boards with wrong ROI in event, run or board
2421 badRoiBoard[int]:Num boards with wrong ROI
2422 deltaT[ms]:Time in ms for rates
2423 rateNew[int]:Number of new start events received
2424 numConn[int]:Number of connections per board
2425 errConn[int]:IO errors per board
2426 rateBytes[int]:Bytes read this cycle
2427 totBytes[int]:Bytes read (counter)
2428 I:3;I:5;X:4;I:3;I:3;I:40;I:1;I:2;C:40;I:40;I:40;X:40
2429 """
2430 return self._get("STATISTICS1")
2431
2432 def enable_sclk(self, *args):
2433 """
2434 Dim Command
2435 Set SCLK
2436 B:1
2437 """
2438 self._cmd("ENABLE_SCLK", *args)
2439
2440 def enable_busy_on(self, *args):
2441 """
2442 Dim Command
2443 Set BUSY constantly high (has priority over BUSY_OFF)
2444 B:1
2445 """
2446 self._cmd("ENABLE_BUSY_ON", *args)
2447
2448 def set_region_of_interest(self, *args):
2449 """
2450 Dim Command
2451 Set region-of-interest to value
2452 channel[short]:Channel on each chip for which the ROI is set (0-8), -1 for all
2453 val[short]:Value to be set
2454 I:2
2455 """
2456 self._cmd("SET_REGION_OF_INTEREST", *args)
2457
2458 def set_trigger_rate(self, *args):
2459 """
2460 Dim Command
2461 Enable continous trigger
2462 I:1
2463 """
2464 self._cmd("SET_TRIGGER_RATE", *args)
2465
2466 def statistics2(self):
2467 """
2468 Dim Service
2469 Event Builder status, events oriented
2470 reset[int]:If increased, reset all counters
2471 numRead[int]:How often sucessful read from N sockets per loop
2472 gotByte[int]:number of bytes read per board
2473 gotErr[int]:number of com. errors per board
2474 evtStat[int]:number of evts read, completed, with errors, incomplete
2475 procStat[int]:num. of evts proc., w probs, acc. or rej. by SW trigger
2476 feedStat[int]:number of evts used or rejected by feedback system
2477 wrtStat[int]:number of evts written to disk, with errors
2478 runStat[int]:number of run opened, closed, with open or close errors
2479 numConn[int]:number of sockets successfully opened per board
2480 I:1;I:280;X:40;I:40;I:4;I:4;I:2;I:2;I:3;C:40
2481 """
2482 return self._get("STATISTICS2")
2483
2484 def service_desc(self):
2485 """
2486 Dim Service
2487 Descriptions of services or commands and there arguments
2488 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
2489 C
2490 """
2491 return self._get("SERVICE_DESC")
2492
2493 def send_cmd(self, *args):
2494 """
2495 Dim Command
2496 Send a command to the FADs. Values between 0 and 0xffff are allowed.
2497 command[uint16]:Command to be transmittted.
2498 I:1
2499 """
2500 self._cmd("SEND_CMD", *args)
2501
2502 def stop(self, *args):
2503 """
2504 Dim Command
2505 Stop EventBuilder thread (still write buffered events) and disconnect all slots.
2506
2507 """
2508 self._cmd("STOP", *args)
2509
2510 def connect(self, *args):
2511 """
2512 Dim Command
2513 Connect a disconnected slot.
2514 S:1
2515 """
2516 self._cmd("CONNECT", *args)
2517
2518 def send_single_trigger(self, *args):
2519 """
2520 Dim Command
2521 Issue software triggers
2522
2523 """
2524 self._cmd("SEND_SINGLE_TRIGGER", *args)
2525
2526 def dump_recv(self, *args):
2527 """
2528 Dim Command
2529 For debugging purpose: the times when data has been receives are dumped to a file.
2530 switch[bool]:Enable (yes) or disable (no)
2531 B:1
2532 """
2533 self._cmd("DUMP_RECV", *args)
2534
2535 def enable_drs(self, *args):
2536 """
2537 Dim Command
2538 Switch Domino wave
2539 B:1
2540 """
2541 self._cmd("ENABLE_DRS", *args)
2542
2543 def start_drs_calibration(self, *args):
2544 """
2545 Dim Command
2546 DESC in SERVICE_DESC is empty ?!
2547
2548 """
2549 self._cmd("START_DRS_CALIBRATION", *args)
2550
2551 def start(self, *args):
2552 """
2553 Dim Command
2554 Start EventBuilder thread and connect all valid slots.
2555
2556 """
2557 self._cmd("START", *args)
2558
2559 def set_dac_value(self, *args):
2560 """
2561 Dim Command
2562 Set DAC numbers in range to value
2563 addr[short]:Address of register (-1 for all)
2564 val[short]:Value to be set
2565 I:2
2566 """
2567 self._cmd("SET_DAC_VALUE", *args)
2568
2569 def drs_calibration(self):
2570 """
2571 Dim Service
2572 DESC in SERVICE_DESC is empty ?!
2573 I:1;I:3;F:1474560;F:1474560;F:1474560;F:1474560;F:1474560;F:1474560;F:163840;F:163840
2574 """
2575 return self._get("DRS_CALIBRATION")
2576
2577 def dna(self):
2578 """
2579 Dim Service
2580 DNA of FAD boards
2581 DNA[hex]:Hex identifier of each FAD board
2582 X:40
2583 """
2584 return self._get("DNA")
2585
2586 def configure(self, *args):
2587 """
2588 Dim Command
2589 Configure a new run. If the internla trigger is enabled this might even start a new run.
2590 time_max[s]:Maximum time before the run is closed in seconds (0: unlimited)
2591 num_max[int]:Maximum number of events before the run is closed in seconds (0: unlimited)
2592 run_type[string]:Run type which describes the runs
2593 X:2;C
2594 """
2595 self._cmd("CONFIGURE", *args)
2596
2597 def set_register(self, *args):
2598 """
2599 Dim Command
2600 set register to value
2601 addr[short]:Address of register
2602 val[short]:Value to be set
2603 I:2
2604 """
2605 self._cmd("SET_REGISTER", *args)
2606
2607 def enable_srclk(self, *args):
2608 """
2609 Dim Command
2610 Set SRCLK
2611 B:1
2612 """
2613 self._cmd("ENABLE_SRCLK", *args)
2614
2615 def send_n_triggers(self, *args):
2616 """
2617 Dim Command
2618 Issue N software triggers (note that these are the triggers sent, not the triggers executed)
2619 N[int]: Number of triggers to be sent to the board.
2620 I
2621 """
2622 self._cmd("SEND_N_TRIGGERS", *args)
2623
2624 def remove_slot(self, *args):
2625 """
2626 Dim Command
2627 Remove the Iaddress in slot n. For a list see LIST
2628 slot[short]:Remove the address in slot n from the list
2629 S:1
2630 """
2631 self._cmd("REMOVE_SLOT", *args)
2632
2633 def set_verbose(self, *args):
2634 """
2635 Dim Command
2636 Set verbosity state
2637 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
2638 B:1
2639 """
2640 self._cmd("SET_VERBOSE", *args)
2641
2642 def set_run_number(self, *args):
2643 """
2644 Dim Command
2645 Sent a new run-number to the boards
2646 num[int]:Run number
2647 X:1
2648 """
2649 self._cmd("SET_RUN_NUMBER", *args)
2650
2651 def client_list(self):
2652 """
2653 Dim Service
2654 Native Dim service: A list of all connected clients
2655 C
2656 """
2657 return self._get("CLIENT_LIST")
2658
2659 def enable_command_socket_mode(self, *args):
2660 """
2661 Dim Command
2662 Set debug mode (yes: dump events through command socket, no=dump events through other sockets)
2663 B:1
2664 """
2665 self._cmd("ENABLE_COMMAND_SOCKET_MODE", *args)
2666
2667 def state(self):
2668 """
2669 Dim Service
2670 Provides the state of the state machine as quality of service.
2671 Text[string]:A human readable string sent by the last state change.
2672 C
2673 """
2674 return self._get("STATE")
2675
2676 def exit(self, *args):
2677 """
2678 Dim Command
2679 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
2680 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
2681 L:1
2682 """
2683 self._cmd("EXIT", *args)
2684
2685 def raw_data(self):
2686 """
2687 Dim Service
2688 DESC in SERVICE_DESC is empty ?!
2689 S:1;I:1;S:1;I:1;I:2;I:40;S:1440;S:160;F
2690 """
2691 return self._get("RAW_DATA")
2692
2693 def list_slots(self, *args):
2694 """
2695 Dim Command
2696 Print a list of all available board addressesa and whether they are enabled
2697
2698 """
2699 self._cmd("LIST_SLOTS", *args)
2700
2701 def set_debug_event_builder_out(self, *args):
2702 """
2703 Dim Command
2704 Enable or disable the debug output from the event builder
2705 enable[bool]:Enable/Disable (yes/no)
2706 B:1
2707 """
2708 self._cmd("SET_DEBUG_EVENT_BUILDER_OUT", *args)
2709
2710 def temperature(self):
2711 """
2712 Dim Service
2713 FADs temperatures
2714 temp[deg. C]:0 global min, 1-40 min, 41 global max, 42-81 max
2715 F:82
2716 """
2717 return self._get("TEMPERATURE")
2718
2719 def dump_stream(self, *args):
2720 """
2721 Dim Command
2722 For debugging purpose: the binary data stream read from the sockets 0-7 can be dumped to files.
2723 switch[bool]:Enable (yes) or disable (no)
2724 B:1
2725 """
2726 self._cmd("DUMP_STREAM", *args)
2727
2728 def region_of_interest(self):
2729 """
2730 Dim Service
2731 DESC in SERVICE_DESC is empty ?!
2732 S:2
2733 """
2734 return self._get("REGION_OF_INTEREST")
2735
2736 def ignore_events(self, *args):
2737 """
2738 Dim Command
2739 Instructs the event-builder to ignore events from the given slot but still read the data from the socket.
2740 slot[short]:Slot from which the data should be ignored when building events
2741 enable[bool]:Whether the event builder should ignore data from this slot (yes) or allowed (no)
2742 S:1;B:1
2743 """
2744 self._cmd("IGNORE_EVENTS", *args)
2745
2746 def start_run(self):
2747 """
2748 Dim Service
2749 Run numbers
2750 run[idx]:Run no of last conf'd run (-1 if reset or none config'd yet)
2751 next[idx]:Run number which will be assigned to next configuration
2752 X:1;X:1
2753 """
2754 return self._get("START_RUN")
2755
2756 def prescaler(self):
2757 """
2758 Dim Service
2759 Trigger generator prescaler of fad boards
2760 prescaler[int]:Trigger generator prescaler value, for each board
2761 S:42
2762 """
2763 return self._get("PRESCALER")
2764
2765 def file_format(self):
2766 """
2767 Dim Service
2768 DESC in SERVICE_DESC is empty ?!
2769 S:1
2770 """
2771 return self._get("FILE_FORMAT")
2772
2773 def runs(self):
2774 """
2775 Dim Service
2776 Run files statistics
2777 stats[int]:num of open files, min/max run no, last opened or closed run
2778 file[string]:filename of last opened file
2779 I:5;C
2780 """
2781 return self._get("RUNS")
2782
2783 def run_number(self):
2784 """
2785 Dim Service
2786 Run numbers coming from FAD boards
2787 runNumbers[int]:current run number of each FAD board. 40=min, 41=max
2788 I:42
2789 """
2790 return self._get("RUN_NUMBER")
2791
2792 def service_list(self):
2793 """
2794 Dim Service
2795 Native Dim service: List of services, commands and formats
2796 ServiceList[string]:For details see the Dim manual.
2797 C
2798 """
2799 return self._get("SERVICE_LIST")
2800
2801 def toggle(self, *args):
2802 """
2803 Dim Command
2804 DESC in SERVICE_DESC is empty ?!
2805 S:1
2806 """
2807 self._cmd("TOGGLE", *args)
2808
2809 def reset_secondary_drs_baseline(self, *args):
2810 """
2811 Dim Command
2812 DESC in SERVICE_DESC is empty ?!
2813
2814 """
2815 self._cmd("RESET_SECONDARY_DRS_BASELINE", *args)
2816
2817 def message(self):
2818 """
2819 Dim Service
2820 A general logging service providing a quality of service (severity)
2821 Message[string]:The message
2822 C
2823 """
2824 return self._get("MESSAGE")
2825
2826 def close_open_files(self, *args):
2827 """
2828 Dim Command
2829 Close all run files opened by the EventBuilder.
2830
2831 """
2832 self._cmd("CLOSE_OPEN_FILES", *args)
2833
2834 def stats(self):
2835 """
2836 Dim Service
2837 Statistics about size written
2838 X:4
2839 """
2840 return self._get("STATS")
2841
2842 def soft_reset(self, *args):
2843 """
2844 Dim Command
2845 Wait for buffers to drain, close all files and reinitialize event builder thread.
2846
2847 """
2848 self._cmd("SOFT_RESET", *args)
2849
2850 def hard_reset(self, *args):
2851 """
2852 Dim Command
2853 Free all buffers, close all files and reinitialize event builder thread.
2854
2855 """
2856 self._cmd("HARD_RESET", *args)
2857
2858 def connections(self):
2859 """
2860 Dim Service
2861 Connection status of FAD boards
2862 status[bitpattern]:lower bits stat1, upper bits stat2, for every board. 40=thread
2863 char[unknown]:to be completed
2864 C:40;C:1
2865 """
2866 return self._get("CONNECTIONS")
2867
2868 def reset_configure(self, *args):
2869 """
2870 Dim Command
2871 If configuration failed and the fadctrl is waiting for something, use this to reset the state.
2872
2873 """
2874 self._cmd("RESET_CONFIGURE", *args)
2875
2876class MAGIC_WEATHER ( FactDimServer):
2877 def version_number(self):
2878 """
2879 Dim Service
2880 Native Dim service: Version number of Dim in use
2881 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
2882 L
2883 """
2884 return self._get("VERSION_NUMBER")
2885
2886 def service_list(self):
2887 """
2888 Dim Service
2889 Native Dim service: List of services, commands and formats
2890 ServiceList[string]:For details see the Dim manual.
2891 C
2892 """
2893 return self._get("SERVICE_LIST")
2894
2895 def client_list(self):
2896 """
2897 Dim Service
2898 Native Dim service: A list of all connected clients
2899 C
2900 """
2901 return self._get("CLIENT_LIST")
2902
2903 def state(self):
2904 """
2905 Dim Service
2906 Provides the state of the state machine as quality of service.
2907 Text[string]:A human readable string sent by the last state change.
2908 C
2909 """
2910 return self._get("STATE")
2911
2912 def data(self):
2913 """
2914 Dim Service
2915 stat:Status
2916 T[deg C]:Temperature
2917 T_dew[deg C]:Dew point
2918 H[%]:Humidity
2919 P[hPa]:Air pressure
2920 v[km/h]:Wind speed
2921 v_max[km/h]:Wind gusts
2922 d[deg]:Wind direction (N-E)
2923 S:1;F:1;F:1;F:1;F:1;F:1;F:1;F:1
2924 """
2925 return self._get("DATA")
2926
2927 def message(self):
2928 """
2929 Dim Service
2930 A general logging service providing a quality of service (severity)
2931 Message[string]:The message
2932 C
2933 """
2934 return self._get("MESSAGE")
2935
2936 def state_list(self):
2937 """
2938 Dim Service
2939 Provides a list with descriptions for each service.
2940 StateList[string]:A \n separated list of the form id:name=description
2941 C
2942 """
2943 return self._get("STATE_LIST")
2944
2945 def set_verbose(self, *args):
2946 """
2947 Dim Command
2948 set verbosity state
2949 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
2950 B
2951 """
2952 self._cmd("SET_VERBOSE", *args)
2953
2954 def service_desc(self):
2955 """
2956 Dim Service
2957 Descriptions of services or commands and there arguments
2958 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
2959 C
2960 """
2961 return self._get("SERVICE_DESC")
2962
2963 def exit(self, *args):
2964 """
2965 Dim Command
2966 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
2967 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
2968 L:1
2969 """
2970 self._cmd("EXIT", *args)
2971
2972class CHAT ( FactDimServer):
2973 def exit(self, *args):
2974 """
2975 Dim Command
2976 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
2977 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
2978 L:1
2979 """
2980 self._cmd("EXIT", *args)
2981
2982 def client_list(self):
2983 """
2984 Dim Service
2985 Native Dim service: A list of all connected clients
2986 C
2987 """
2988 return self._get("CLIENT_LIST")
2989
2990 def state_list(self):
2991 """
2992 Dim Service
2993 Provides a list with descriptions for each service.
2994 StateList[string]:A \n separated list of the form id:name=description
2995 C
2996 """
2997 return self._get("STATE_LIST")
2998
2999 def version_number(self):
3000 """
3001 Dim Service
3002 Native Dim service: Version number of Dim in use
3003 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
3004 L
3005 """
3006 return self._get("VERSION_NUMBER")
3007
3008 def service_desc(self):
3009 """
3010 Dim Service
3011 Descriptions of services or commands and there arguments
3012 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3013 C
3014 """
3015 return self._get("SERVICE_DESC")
3016
3017 def msg(self, *args):
3018 """
3019 Dim Command
3020 msg[string]:message to be distributed
3021 C
3022 """
3023 self._cmd("MSG", *args)
3024
3025 def state(self):
3026 """
3027 Dim Service
3028 Provides the state of the state machine as quality of service.
3029 Text[string]:A human readable string sent by the last state change.
3030 C
3031 """
3032 return self._get("STATE")
3033
3034 def service_list(self):
3035 """
3036 Dim Service
3037 Native Dim service: List of services, commands and formats
3038 ServiceList[string]:For details see the Dim manual.
3039 C
3040 """
3041 return self._get("SERVICE_LIST")
3042
3043 def message(self):
3044 """
3045 Dim Service
3046 A general logging service providing a quality of service (severity)
3047 Message[string]:The message
3048 C
3049 """
3050 return self._get("MESSAGE")
3051
3052class DRIVE_CONTROL ( FactDimServer):
3053 def track_on(self, *args):
3054 """
3055 Dim Command
3056 Move the telescope to the given position and start tracking
3057 Name[string]:Source name
3058 C
3059 """
3060 self._cmd("TRACK_ON", *args)
3061
3062 def status(self):
3063 """
3064 Dim Service
3065 DESC in SERVICE_DESC is empty ?!
3066 C:2;C:1
3067 """
3068 return self._get("STATUS")
3069
3070 def state_list(self):
3071 """
3072 Dim Service
3073 Provides a list with descriptions for each service.
3074 StateList[string]:A \n separated list of the form id:name=description
3075 C
3076 """
3077 return self._get("STATE_LIST")
3078
3079 def set_led_brightness(self, *args):
3080 """
3081 Dim Command
3082 Set the LED brightness of the top and bottom leds
3083 top[au]:Allowed range 0-32767 for top LEDs
3084 bot[au]:Allowed range 0-32767 for bottom LEDs
3085 I:2
3086 """
3087 self._cmd("SET_LED_BRIGHTNESS", *args)
3088
3089 def track_wobble(self, *args):
3090 """
3091 Dim Command
3092 Move the telescope to the given wobble position around the given source and start tracking
3093 id:Wobble angle id (1 or 2)
3094 Name[string]:Source name
3095 S:1;C
3096 """
3097 self._cmd("TRACK_WOBBLE", *args)
3098
3099 def wobble(self, *args):
3100 """
3101 Dim Command
3102 Move the telescope to the given wobble position around the given sky coordinates and start tracking them
3103 Ra[h]:Right ascension
3104 Dec[deg]:Declination
3105 Offset[deg]:Wobble offset
3106 Angle[deg]:Wobble angle
3107 D:4
3108 """
3109 self._cmd("WOBBLE", *args)
3110
3111 def source_position(self):
3112 """
3113 Dim Service
3114 Ra_src[h]:Source right ascension
3115 Dec_src[deg]:Source declination
3116 Ra_cmd[h]:Command right ascension
3117 Dec_cmd[deg]:Command declination
3118 Offset[deg]:Wobble offset
3119 Angle[deg]:Wobble angle
3120 Name[string]:Source name if available
3121 D:1;D:1;D:1;D:1;D:1;D:1;C:31
3122 """
3123 return self._get("SOURCE_POSITION")
3124
3125 def move_to(self, *args):
3126 """
3127 Dim Command
3128 Move the telescope to the given local coordinates
3129 Zd[deg]:Zenith distance
3130 Az[deg]:Azimuth
3131 D:2
3132 """
3133 self._cmd("MOVE_TO", *args)
3134
3135 def stop(self, *args):
3136 """
3137 Dim Command
3138 Stop any kind of movement.
3139
3140 """
3141 self._cmd("STOP", *args)
3142
3143 def leds_off(self, *args):
3144 """
3145 Dim Command
3146 Switch off TPoint LEDs
3147
3148 """
3149 self._cmd("LEDS_OFF", *args)
3150
3151 def jupiter(self, *args):
3152 """
3153 Dim Command
3154 Start tracking Jupiter
3155
3156 """
3157 self._cmd("JUPITER", *args)
3158
3159 def park(self, *args):
3160 """
3161 Dim Command
3162 Park the telescope
3163
3164 """
3165 self._cmd("PARK", *args)
3166
3167 def service_desc(self):
3168 """
3169 Dim Service
3170 Descriptions of services or commands and there arguments
3171 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3172 C
3173 """
3174 return self._get("SERVICE_DESC")
3175
3176 def service_list(self):
3177 """
3178 Dim Service
3179 Native Dim service: List of services, commands and formats
3180 ServiceList[string]:For details see the Dim manual.
3181 C
3182 """
3183 return self._get("SERVICE_LIST")
3184
3185 def moon(self, *args):
3186 """
3187 Dim Command
3188 Start tracking the moon
3189
3190 """
3191 self._cmd("MOON", *args)
3192
3193 def reload_sources(self, *args):
3194 """
3195 Dim Command
3196 Reload sources from database after database has changed..
3197
3198 """
3199 self._cmd("RELOAD_SOURCES", *args)
3200
3201 def exit(self, *args):
3202 """
3203 Dim Command
3204 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
3205 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
3206 L:1
3207 """
3208 self._cmd("EXIT", *args)
3209
3210 def print_cmd(self, *args):
3211 """
3212 Dim Command
3213 Print source list.
3214
3215 """
3216 self._cmd("PRINT_CMD", *args)
3217
3218 def set_verbose(self, *args):
3219 """
3220 Dim Command
3221 Set verbosity state
3222 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
3223 B
3224 """
3225 self._cmd("SET_VERBOSE", *args)
3226
3227 def message(self):
3228 """
3229 Dim Service
3230 A general logging service providing a quality of service (severity)
3231 Message[string]:The message
3232 C
3233 """
3234 return self._get("MESSAGE")
3235
3236 def resume(self, *args):
3237 """
3238 Dim Command
3239 If drive is in Error state, this can b used to resume the last tracking command, if the last command sent to cosy was a tracking command.
3240
3241 """
3242 self._cmd("RESUME", *args)
3243
3244 def tpoint(self):
3245 """
3246 Dim Service
3247 Take a TPoint (given values will be written to the TPoint files)
3248 mag[float]:Magnitude of the star
3249 name[string]:Name of the star
3250 D:1;D:1;D:1;D:1;D:1;D:1;D:1;D:1;S:1;D:1;D:1;D:1;D:1;D:1;D:1;D:1;C
3251 """
3252 return self._get("TPOINT")
3253
3254 def set_autoresume(self, *args):
3255 """
3256 Dim Command
3257 Enable/disable auto resume
3258 resume[bool]:if enabled, drive is tracking and goes to error state, the last tracking command is repeated automatically.
3259 B
3260 """
3261 self._cmd("SET_AUTORESUME", *args)
3262
3263 def reconnect(self, *args):
3264 """
3265 Dim Command
3266 (Re)connect ethernet connection to FTM, a new address can be given
3267 [host][string]:new ethernet address in the form <host:port>
3268 O
3269 """
3270 self._cmd("RECONNECT", *args)
3271
3272 def tracking_position(self):
3273 """
3274 Dim Service
3275 Ra[h]:Command right ascension
3276 Dec[deg]:Command declination
3277 Ha[h]:Corresponding hour angle
3278 Zd[deg]:Nominal zenith distance
3279 Az[deg]:Nominal azimuth angle
3280 dZd[deg]:Control deviation Zd
3281 dAz[deg]:Control deviation Az
3282 dev[arcsec]:Absolute control deviation
3283 D:1;D:1;D:1;D:1;D:1;D:1;D:1;D:1
3284 """
3285 return self._get("TRACKING_POSITION")
3286
3287 def venus(self, *args):
3288 """
3289 Dim Command
3290 Start tracking Venus
3291
3292 """
3293 self._cmd("VENUS", *args)
3294
3295 def take_tpoint(self, *args):
3296 """
3297 Dim Command
3298 Take a TPoint
3299
3300 """
3301 self._cmd("TAKE_TPOINT", *args)
3302
3303 def disconnect(self, *args):
3304 """
3305 Dim Command
3306 disconnect from ethernet
3307
3308 """
3309 self._cmd("DISCONNECT", *args)
3310
3311 def saturn(self, *args):
3312 """
3313 Dim Command
3314 Start tracking Saturn
3315
3316 """
3317 self._cmd("SATURN", *args)
3318
3319 def unlock(self, *args):
3320 """
3321 Dim Command
3322 Unlock locked state.
3323
3324 """
3325 self._cmd("UNLOCK", *args)
3326
3327 def state(self):
3328 """
3329 Dim Service
3330 Provides the state of the state machine as quality of service.
3331 Text[string]:A human readable string sent by the last state change.
3332 C
3333 """
3334 return self._get("STATE")
3335
3336 def pointing_position(self):
3337 """
3338 Dim Service
3339 Zd[deg]:Zenith distance (encoder readout)
3340 Az[deg]:Azimuth angle (encoder readout)
3341 D:1;D:1
3342 """
3343 return self._get("POINTING_POSITION")
3344
3345 def track(self, *args):
3346 """
3347 Dim Command
3348 Move the telescope to the given sky coordinates and start tracking them
3349 Ra[h]:Right ascension
3350 Dec[deg]:Declination
3351 D:2
3352 """
3353 self._cmd("TRACK", *args)
3354
3355 def client_list(self):
3356 """
3357 Dim Service
3358 Native Dim service: A list of all connected clients
3359 C
3360 """
3361 return self._get("CLIENT_LIST")
3362
3363 def mars(self, *args):
3364 """
3365 Dim Command
3366 Start tracking Mars
3367
3368 """
3369 self._cmd("MARS", *args)
3370
3371 def track_source(self, *args):
3372 """
3373 Dim Command
3374 Move the telescope to the given wobble position around the given source and start tracking
3375 Offset[deg]:Wobble offset
3376 Angle[deg]:Wobble angle
3377 Name[string]:Source name
3378 D:2;C
3379 """
3380 self._cmd("TRACK_SOURCE", *args)
3381
3382 def version_number(self):
3383 """
3384 Dim Service
3385 Native Dim service: Version number of Dim in use
3386 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
3387 L
3388 """
3389 return self._get("VERSION_NUMBER")
3390
3391class SMART_FACT ( FactDimServer):
3392 def print_cmd(self, *args):
3393 """
3394 Dim Command
3395 Print a list of the states of all connected servers.
3396
3397 """
3398 self._cmd("PRINT_CMD", *args)
3399
3400 def service_list(self):
3401 """
3402 Dim Service
3403 Native Dim service: List of services, commands and formats
3404 ServiceList[string]:For details see the Dim manual.
3405 C
3406 """
3407 return self._get("SERVICE_LIST")
3408
3409 def version_number(self):
3410 """
3411 Dim Service
3412 Native Dim service: Version number of Dim in use
3413 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
3414 L
3415 """
3416 return self._get("VERSION_NUMBER")
3417
3418 def client_list(self):
3419 """
3420 Dim Service
3421 Native Dim service: A list of all connected clients
3422 C
3423 """
3424 return self._get("CLIENT_LIST")
3425
3426 def service_desc(self):
3427 """
3428 Dim Service
3429 Descriptions of services or commands and there arguments
3430 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3431 C
3432 """
3433 return self._get("SERVICE_DESC")
3434
3435 def exit(self, *args):
3436 """
3437 Dim Command
3438 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
3439 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
3440 L:1
3441 """
3442 self._cmd("EXIT", *args)
3443
3444 def message(self):
3445 """
3446 Dim Service
3447 A general logging service providing a quality of service (severity)
3448 Message[string]:The message
3449 C
3450 """
3451 return self._get("MESSAGE")
3452
3453 def state(self):
3454 """
3455 Dim Service
3456 Provides the state of the state machine as quality of service.
3457 Text[string]:A human readable string sent by the last state change.
3458 C
3459 """
3460 return self._get("STATE")
3461
3462 def state_list(self):
3463 """
3464 Dim Service
3465 Provides a list with descriptions for each service.
3466 StateList[string]:A \n separated list of the form id:name=description
3467 C
3468 """
3469 return self._get("STATE_LIST")
3470
3471class MCP ( FactDimServer):
3472 def message(self):
3473 """
3474 Dim Service
3475 A general logging service providing a quality of service (severity)
3476 Message[string]:The message
3477 C
3478 """
3479 return self._get("MESSAGE")
3480
3481 def state_list(self):
3482 """
3483 Dim Service
3484 Provides a list with descriptions for each service.
3485 StateList[string]:A \n separated list of the form id:name=description
3486 C
3487 """
3488 return self._get("STATE_LIST")
3489
3490 def version_number(self):
3491 """
3492 Dim Service
3493 Native Dim service: Version number of Dim in use
3494 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
3495 L
3496 """
3497 return self._get("VERSION_NUMBER")
3498
3499 def print_cmd(self, *args):
3500 """
3501 Dim Command
3502 Print the states and connection status of all systems connected to the MCP.
3503
3504 """
3505 self._cmd("PRINT_CMD", *args)
3506
3507 def exit(self, *args):
3508 """
3509 Dim Command
3510 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
3511 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
3512 L:1
3513 """
3514 self._cmd("EXIT", *args)
3515
3516 def client_list(self):
3517 """
3518 Dim Service
3519 Native Dim service: A list of all connected clients
3520 C
3521 """
3522 return self._get("CLIENT_LIST")
3523
3524 def stop(self, *args):
3525 """
3526 Dim Command
3527 Stops the trigger (either disables the FTM trigger or the internal DRS trigger)
3528
3529 """
3530 self._cmd("STOP", *args)
3531
3532 def service_list(self):
3533 """
3534 Dim Service
3535 Native Dim service: List of services, commands and formats
3536 ServiceList[string]:For details see the Dim manual.
3537 C
3538 """
3539 return self._get("SERVICE_LIST")
3540
3541 def service_desc(self):
3542 """
3543 Dim Service
3544 Descriptions of services or commands and there arguments
3545 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3546 C
3547 """
3548 return self._get("SERVICE_DESC")
3549
3550 def start(self, *args):
3551 """
3552 Dim Command
3553 Start the configuration and data taking for a run-type of a pre-defined setup
3554 TimeMax[s]:Maximum number of seconds before the run will be closed automatically
3555 NumMax[count]:Maximum number events before the run will be closed automatically
3556 Name[text]:Name of the configuration to be used for taking data
3557 X:2;C
3558 """
3559 self._cmd("START", *args)
3560
3561 def reset(self, *args):
3562 """
3563 Dim Command
3564 If a configuration blockes because a system cannot configure itself properly, this command can be called to leave the configuration procedure. The command is also propagated to FTM and FAD
3565
3566 """
3567 self._cmd("RESET", *args)
3568
3569 def configuration(self):
3570 """
3571 Dim Service
3572 Run configuration information
3573 MaxTime[s]:Maximum time before the run gets stopped
3574 MaxEvents[num]:Maximum number of events before the run gets stopped
3575 Name[text]:Name of the chosen configuration
3576 X:1;X:1;C
3577 """
3578 return self._get("CONFIGURATION")
3579
3580 def state(self):
3581 """
3582 Dim Service
3583 Provides the state of the state machine as quality of service.
3584 Text[string]:A human readable string sent by the last state change.
3585 C
3586 """
3587 return self._get("STATE")
3588
3589class TIME_CHECK ( FactDimServer):
3590 def message(self):
3591 """
3592 Dim Service
3593 A general logging service providing a quality of service (severity)
3594 Message[string]:The message
3595 C
3596 """
3597 return self._get("MESSAGE")
3598
3599 def exit(self, *args):
3600 """
3601 Dim Command
3602 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
3603 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
3604 L:1
3605 """
3606 self._cmd("EXIT", *args)
3607
3608 def state(self):
3609 """
3610 Dim Service
3611 Provides the state of the state machine as quality of service.
3612 Text[string]:A human readable string sent by the last state change.
3613 C
3614 """
3615 return self._get("STATE")
3616
3617 def service_list(self):
3618 """
3619 Dim Service
3620 Native Dim service: List of services, commands and formats
3621 ServiceList[string]:For details see the Dim manual.
3622 C
3623 """
3624 return self._get("SERVICE_LIST")
3625
3626 def version_number(self):
3627 """
3628 Dim Service
3629 Native Dim service: Version number of Dim in use
3630 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
3631 L
3632 """
3633 return self._get("VERSION_NUMBER")
3634
3635 def state_list(self):
3636 """
3637 Dim Service
3638 Provides a list with descriptions for each service.
3639 StateList[string]:A \n separated list of the form id:name=description
3640 C
3641 """
3642 return self._get("STATE_LIST")
3643
3644 def service_desc(self):
3645 """
3646 Dim Service
3647 Descriptions of services or commands and there arguments
3648 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3649 C
3650 """
3651 return self._get("SERVICE_DESC")
3652
3653 def client_list(self):
3654 """
3655 Dim Service
3656 Native Dim service: A list of all connected clients
3657 C
3658 """
3659 return self._get("CLIENT_LIST")
3660
3661class BIAS_CONTROL ( FactDimServer):
3662 def dac(self):
3663 """
3664 Dim Service
3665 U[dac]:Current dac setting
3666 Uref[dac]:Reference dac setting
3667 S:416;S:416
3668 """
3669 return self._get("DAC")
3670
3671 def set_channel_dac(self, *args):
3672 """
3673 Dim Command
3674 Set a new target value in DAC counts for a single channel. Starts ramping if necessary.
3675 channel[short]:Channel for which to set the target voltage [0-415]
3676 voltage[dac]:Target voltage in DAC units for the given channel
3677 S:1;S:1
3678 """
3679 self._cmd("SET_CHANNEL_DAC", *args)
3680
3681 def request_status(self, *args):
3682 """
3683 Dim Command
3684 Asynchronously request the status (current) of all channels.
3685
3686 """
3687 self._cmd("REQUEST_STATUS", *args)
3688
3689 def expert_reset(self, *args):
3690 """
3691 Dim Command
3692 Send the RESET command (note that this is possibly harmfull command)
3693
3694 """
3695 self._cmd("EXPERT_RESET", *args)
3696
3697 def increase_all_channels_voltage(self, *args):
3698 """
3699 Dim Command
3700 Add the given voltages to the current reference voltages. Starts ramping if necessary.offset[V]:Offsets to be added to the reference voltage of all channels in volts
3701 F:416
3702 """
3703 self._cmd("INCREASE_ALL_CHANNELS_VOLTAGE", *args)
3704
3705 def reset_over_current_status(self, *args):
3706 """
3707 Dim Command
3708 Set all channels in over current state to 0V and send a system reset to reset the over current flags.
3709
3710 """
3711 self._cmd("RESET_OVER_CURRENT_STATUS", *args)
3712
3713 def print_currents(self, *args):
3714 """
3715 Dim Command
3716 Print a table with all current read back with the last request operation
3717
3718 """
3719 self._cmd("PRINT_CURRENTS", *args)
3720
3721 def print_info(self, *args):
3722 """
3723 Dim Command
3724 Print a table with all current read back with the last request operation
3725
3726 """
3727 self._cmd("PRINT_INFO", *args)
3728
3729 def reconnect(self, *args):
3730 """
3731 Dim Command
3732 (Re)connect USB connection to Bias power supply, a new address can be given
3733 tty[string]:new USB address
3734 O
3735 """
3736 self._cmd("RECONNECT", *args)
3737
3738 def enable_dummy_mode(self, *args):
3739 """
3740 Dim Command
3741 Enable dummy mode. In this mode SetAllChannels prints informations instead of sending anything to the bias crate.
3742 enable[bool]:disable or enable dummy mode
3743 B:1
3744 """
3745 self._cmd("ENABLE_DUMMY_MODE", *args)
3746
3747 def set_channel_offset_to_zero(self, *args):
3748 """
3749 Dim Command
3750 Set a single channel channels to its G-APD reference voltage. Starts ramping if necessary.
3751 channel[short]:Channel for which to set the target voltage [0-416]
3752 S:1
3753 """
3754 self._cmd("SET_CHANNEL_OFFSET_TO_ZERO", *args)
3755
3756 def exit(self, *args):
3757 """
3758 Dim Command
3759 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
3760 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
3761 L:1
3762 """
3763 self._cmd("EXIT", *args)
3764
3765 def set_channel_voltage(self, *args):
3766 """
3767 Dim Command
3768 Set a new target voltage for a single channel. Starts ramping if necessary.
3769 channel[short]:Channel for which to set the target voltage [0-415]
3770 voltage[V]:Target voltage in volts for the given channel (will be converted to DAC units)
3771 S:1;F:1
3772 """
3773 self._cmd("SET_CHANNEL_VOLTAGE", *args)
3774
3775 def set_global_dac(self, *args):
3776 """
3777 Dim Command
3778 Set a new target value for all channels in DAC counts. Starts ramping if necessary. (This command is not realized with the GLOBAL SET command.)
3779 voltage[dac]:Global target voltage in DAC counts.
3780 S:1
3781 """
3782 self._cmd("SET_GLOBAL_DAC", *args)
3783
3784 def set_all_channels_voltage(self, *args):
3785 """
3786 Dim Command
3787 Set all channels to the given new reference voltage. Starts ramping if necessary.voltage[V]:New reference voltage for all channels
3788 F:416
3789 """
3790 self._cmd("SET_ALL_CHANNELS_VOLTAGE", *args)
3791
3792 def voltage(self):
3793 """
3794 Dim Service
3795 Uout[V]:Output voltage
3796 F:416
3797 """
3798 return self._get("VOLTAGE")
3799
3800 def stop(self, *args):
3801 """
3802 Dim Command
3803 Stop an on-going ramping
3804
3805 """
3806 self._cmd("STOP", *args)
3807
3808 def expert_set_channel_voltage(self, *args):
3809 """
3810 Dim Command
3811 Send a single channel set command. The given voltage is converted to DAC commands.
3812 S:1;F:1
3813 """
3814 self._cmd("EXPERT_SET_CHANNEL_VOLTAGE", *args)
3815
3816 def set_zero_voltage(self, *args):
3817 """
3818 Dim Command
3819 Set all channels to a zero reference voltage. Starts ramping if necessary.
3820
3821 """
3822 self._cmd("SET_ZERO_VOLTAGE", *args)
3823
3824 def client_list(self):
3825 """
3826 Dim Service
3827 Native Dim service: A list of all connected clients
3828 C
3829 """
3830 return self._get("CLIENT_LIST")
3831
3832 def print_voltages(self, *args):
3833 """
3834 Dim Command
3835 Print a table with all voltages (current and reference voltages as currently in memory)
3836
3837 """
3838 self._cmd("PRINT_VOLTAGES", *args)
3839
3840 def increase_global_voltage(self, *args):
3841 """
3842 Dim Command
3843 Increases the voltage of all channels by the given offset. Starts ramping if necessary. (This command is not realized with the GLOBAL SET command.)
3844 offset[V]:Offset to be added to all channels (will be converted to DAC counts)
3845 F:1
3846 """
3847 self._cmd("INCREASE_GLOBAL_VOLTAGE", *args)
3848
3849 def set_global_voltage(self, *args):
3850 """
3851 Dim Command
3852 Set a new target voltage for all channels. Starts ramping if necessary. (This command is not realized with the GLOBAL SET command.)
3853 voltage[V]:Global target voltage in volts (will be converted to DAC units)
3854 F:1
3855 """
3856 self._cmd("SET_GLOBAL_VOLTAGE", *args)
3857
3858 def state_list(self):
3859 """
3860 Dim Service
3861 Provides a list with descriptions for each service.
3862 StateList[string]:A \n separated list of the form id:name=description
3863 C
3864 """
3865 return self._get("STATE_LIST")
3866
3867 def expert_set_global_dac(self, *args):
3868 """
3869 Dim Command
3870 Send the global set command.
3871 S:1
3872 """
3873 self._cmd("EXPERT_SET_GLOBAL_DAC", *args)
3874
3875 def nominal(self):
3876 """
3877 Dim Service
3878 Ubr[V]:Nominal breakdown voltage at 25deg C
3879 Uov[V]:Nominal overvoltage
3880 Uoff[V]:Bias crate channel offsets
3881 F:416;F:416;F:416
3882 """
3883 return self._get("NOMINAL")
3884
3885 def set_update_interval(self, *args):
3886 """
3887 Dim Command
3888 Set the updat einterval how often the currents are requested
3889 interval[ms]:Update interval in milliseconds
3890 I:1
3891 """
3892 self._cmd("SET_UPDATE_INTERVAL", *args)
3893
3894 def expert_set_channel_dac(self, *args):
3895 """
3896 Dim Command
3897 Send a single channel set command.
3898 S:1;S:1
3899 """
3900 self._cmd("EXPERT_SET_CHANNEL_DAC", *args)
3901
3902 def increase_channel_voltage(self, *args):
3903 """
3904 Dim Command
3905 Increases the voltage of all channels by the given offset. Starts ramping if necessary. (This command is not realized with the GLOBAL SET command.)
3906 channel[short]:Channel for which to adapt the voltage [0-415]
3907 offset[V]:Offset to be added to all channels (will be converted to DAC counts)
3908 S:1;F:1
3909 """
3910 self._cmd("INCREASE_CHANNEL_VOLTAGE", *args)
3911
3912 def set_all_channels_offset(self, *args):
3913 """
3914 Dim Command
3915 Set all channels to their G-APD reference voltage plus the given offset. Starts ramping if necessary.
3916 offset[V]:Offset to be added to teh G-APD reference voltage globally
3917 F:416
3918 """
3919 self._cmd("SET_ALL_CHANNELS_OFFSET", *args)
3920
3921 def set_global_offset_to_zero(self, *args):
3922 """
3923 Dim Command
3924 Set all channels to their G-APD reference voltage. Starts ramping if necessary.
3925
3926 """
3927 self._cmd("SET_GLOBAL_OFFSET_TO_ZERO", *args)
3928
3929 def set_global_offset(self, *args):
3930 """
3931 Dim Command
3932 Set all channels to their G-APD breakdown voltage plus overvoltage plus the given offset. Starts ramping if necessary.
3933 offset[V]:Offset to be added to the G-APD reference voltage globally
3934 F:1
3935 """
3936 self._cmd("SET_GLOBAL_OFFSET", *args)
3937
3938 def current(self):
3939 """
3940 Dim Service
3941 I[dac]:Bias current (conversion: 5000uA/4096dac)
3942 S:416
3943 """
3944 return self._get("CURRENT")
3945
3946 def service_desc(self):
3947 """
3948 Dim Service
3949 Descriptions of services or commands and there arguments
3950 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
3951 C
3952 """
3953 return self._get("SERVICE_DESC")
3954
3955 def message(self):
3956 """
3957 Dim Service
3958 A general logging service providing a quality of service (severity)
3959 Message[string]:The message
3960 C
3961 """
3962 return self._get("MESSAGE")
3963
3964 def state(self):
3965 """
3966 Dim Service
3967 Provides the state of the state machine as quality of service.
3968 Text[string]:A human readable string sent by the last state change.
3969 C
3970 """
3971 return self._get("STATE")
3972
3973 def print_gapd_reference_voltages(self, *args):
3974 """
3975 Dim Command
3976 Print the G-APD reference values (breakdown voltage + overvoltage) obtained from file
3977
3978 """
3979 self._cmd("PRINT_GAPD_REFERENCE_VOLTAGES", *args)
3980
3981 def set_verbose(self, *args):
3982 """
3983 Dim Command
3984 set verbosity state
3985 verbosity[bool]:disable or enable verbosity for received data (yes/no), except dynamic data
3986 B:1
3987 """
3988 self._cmd("SET_VERBOSE", *args)
3989
3990 def service_list(self):
3991 """
3992 Dim Service
3993 Native Dim service: List of services, commands and formats
3994 ServiceList[string]:For details see the Dim manual.
3995 C
3996 """
3997 return self._get("SERVICE_LIST")
3998
3999 def expert_mode(self, *args):
4000 """
4001 Dim Command
4002 Enable usage of expert commands (note that for safty reasons the are exclusive with the standard commands)
4003 B:1
4004 """
4005 self._cmd("EXPERT_MODE", *args)
4006
4007 def expert_set_global_voltage(self, *args):
4008 """
4009 Dim Command
4010 Send the global set command. The given voltage is converted to DAC counts.
4011 F:1
4012 """
4013 self._cmd("EXPERT_SET_GLOBAL_VOLTAGE", *args)
4014
4015 def set_channel_offset(self, *args):
4016 """
4017 Dim Command
4018 Set single channels to its G-APD breakdown voltage plus overvoltage plus the given offset. Starts ramping if necessary.
4019 channel[short]:Channel for which to set the target voltage [0-415]
4020 offset[V]:Offset to be added to the G-APD reference voltage of the given channel
4021 S:1;F:1
4022 """
4023 self._cmd("SET_CHANNEL_OFFSET", *args)
4024
4025 def start(self, *args):
4026 """
4027 Dim Command
4028 Start a ramping if no ramping is in progress and if reference values differ from current voltages
4029
4030 """
4031 self._cmd("START", *args)
4032
4033 def version_number(self):
4034 """
4035 Dim Service
4036 Native Dim service: Version number of Dim in use
4037 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
4038 L
4039 """
4040 return self._get("VERSION_NUMBER")
4041
4042 def disconnect(self, *args):
4043 """
4044 Dim Command
4045 disconnect from USB
4046
4047 """
4048 self._cmd("DISCONNECT", *args)
4049
4050class DIM_CONTROL ( FactDimServer):
4051 def service_list(self):
4052 """
4053 Dim Service
4054 Native Dim service: List of services, commands and formats
4055 ServiceList[string]:For details see the Dim manual.
4056 C
4057 """
4058 return self._get("SERVICE_LIST")
4059
4060 def message(self):
4061 """
4062 Dim Service
4063 A general logging service providing a quality of service (severity)
4064 Message[string]:The message
4065 C
4066 """
4067 return self._get("MESSAGE")
4068
4069 def start(self, *args):
4070 """
4071 Dim Command
4072 Start a JavaScript
4073 C
4074 """
4075 self._cmd("START", *args)
4076
4077 def stop(self, *args):
4078 """
4079 Dim Command
4080 Stop a runnning batch script or JavaScript
4081 C
4082 """
4083 self._cmd("STOP", *args)
4084
4085 def state(self):
4086 """
4087 Dim Service
4088 Provides the state of the state machine as quality of service.
4089 Text[string]:A human readable string sent by the last state change.
4090 C
4091 """
4092 return self._get("STATE")
4093
4094 def client_list(self):
4095 """
4096 Dim Service
4097 Native Dim service: A list of all connected clients
4098 C
4099 """
4100 return self._get("CLIENT_LIST")
4101
4102 def exit(self, *args):
4103 """
4104 Dim Command
4105 This is a native Dim command: Exit programremotely. FACT++ programs use the given number as return code.
4106 Rc[int]:Return code, under normal circumstances this should be 0 or 1 (42 will call exit() directly, 0x42 will call abort() directly.
4107 L:1
4108 """
4109 self._cmd("EXIT", *args)
4110
4111 def execute(self, *args):
4112 """
4113 Dim Command
4114 Execute a batch script
4115 C
4116 """
4117 self._cmd("EXECUTE", *args)
4118
4119 def service_desc(self):
4120 """
4121 Dim Service
4122 Descriptions of services or commands and there arguments
4123 Description[string]:For a detailed explanation of the descriptive string see the class reference of DimDescriptionService.
4124 C
4125 """
4126 return self._get("SERVICE_DESC")
4127
4128 def state_list(self):
4129 """
4130 Dim Service
4131 Provides a list with descriptions for each service.
4132 StateList[string]:A \n separated list of the form id:name=description
4133 C
4134 """
4135 return self._get("STATE_LIST")
4136
4137 def version_number(self):
4138 """
4139 Dim Service
4140 Native Dim service: Version number of Dim in use
4141 DimVer[int]:Version*100+Release (e.g. V19r17 = 1917)
4142 L
4143 """
4144 return self._get("VERSION_NUMBER")
4145
Note: See TracBrowser for help on using the repository browser.