source: firmware/FAD/FACT_FAD_lib/hdl/memory_manager_2.vhd@ 18752

Last change on this file since 18752 was 11755, checked in by neise, 13 years ago
reinit of this svn repos .... it was all too messy deleted the old folders and restarted with FACT_FAD_lib only. (well and the testbenches)
File size: 13.1 KB
Line 
1library ieee;
2use ieee.std_logic_1164.all;
3use IEEE.STD_LOGIC_ARITH.all;
4use ieee.STD_LOGIC_UNSIGNED.all;
5
6library FACT_FAD_lib;
7use FACT_FAD_lib.fad_definitions.all;
8
9-- library UNISIM;
10-- use UNISIM.VComponents.all;
11-- USE IEEE.NUMERIC_STD.all;
12
13-- RAM_ADDR_WIDTH_64B is used for
14-- output ram_start_addr
15
16-- RAM_ADDR_WIDTH_16B is used for
17-- output wiz_ram_start_addr
18
19
20ENTITY memory_manager_2 IS
21generic(
22 RAM_ADDR_WIDTH_64B : integer := 12;
23 RAM_ADDR_WIDTH_16B : integer := 14
24);
25PORT(
26 state : OUT std_logic_vector (3 DOWNTO 0); -- state is encoded here ... useful for debugging.
27
28 clk : IN std_logic;
29
30 -- CONFIG handshake:
31 config_start : IN std_logic;
32 config_ready : OUT std_logic := '1';
33 -- output of CONFIG states
34 roi_array : IN roi_array_type;
35 roi_max : OUT roi_max_type := (others => conv_std_logic_vector (0, 11));
36 package_length : OUT std_logic_vector (15 downto 0) := (others => '0');
37
38 wiz_number_of_channels : OUT std_logic_vector (3 downto 0) := (others => '0');
39
40 -- interface to DG:
41 dg_start_config : OUT std_logic := '0';
42 dg_config_done : IN std_logic;
43 ram_write_ready : IN std_logic;
44 ram_write_ea : OUT std_logic := '0';
45 ram_start_addr : OUT std_logic_vector (RAM_ADDR_WIDTH_64B-1 DOWNTO 0) := (others => '0');
46
47 -- interface to W5300:
48 wiz_read_done : IN std_logic;
49 wiz_write_ea : OUT std_logic := '0';
50 wiz_write_length : OUT std_logic_vector (16 downto 0) := (others => '0');
51 wiz_ram_start_addr : OUT std_logic_vector (RAM_ADDR_WIDTH_16B-1 downto 0) := (others => '0');
52 wiz_write_header : OUT std_logic := '0';
53 wiz_write_end : OUT std_logic := '0';
54
55
56 data_ram_empty : out std_logic -- stupid signal, I need to get rid of it. DN 23.05.2011
57);
58
59-- Declarations
60
61END memory_manager_2 ;
62
63--
64ARCHITECTURE beha OF memory_manager_2 IS
65
66type state_mm_type is ( MM_CONFIG, MAX_ROI, MAX_ROI1, MAX_ROI2, FIFO_CALC, RAM_CALC, RAM_CALC1, RAM_CALC2,
67 CONFIG_DG, WAIT_FOR_CONFIG_DG,
68 MM_MAIN,
69 WRITE_FIN, READ_FIN, UPDATE_OUTPUT, UPDATE_OUTPUT_2);
70signal state_mm : state_mm_type := MM_CONFIG;
71
72--type roi_array_type is array (0 to 35) of integer range 0 to 1024;
73type roi_max_array_type is array (0 to 8) of integer range 0 to 1024;
74type channel_size_type is array (0 to 8) of integer range 0 to W5300_TX_FIFO_SIZE;
75type fifo_write_length_type is array (0 to 8) of integer range 0 to W5300_TX_FIFO_SIZE;
76type fifo_channels_array_type is array (0 to 8) of integer range 0 to 9;
77type fifo_package_size_ram_type is array (0 to 8) of integer range 0 to RAM_SIZE_16B;
78
79signal roi_max_array : roi_max_array_type := (others => 0);
80
81-- size of channel groups (16 bit)
82signal channel_size : channel_size_type := (others => 0);
83-- write length of packages (16 bit)
84signal fifo_write_length : fifo_write_length_type := (others => 0);
85-- number of channels per package
86signal fifo_channels_array : fifo_channels_array_type := (others => 0);
87-- size of packages in ram (16 bit)
88signal fifo_package_size_ram : fifo_package_size_ram_type := (others => 0);
89--
90signal event_size_ram : integer range 0 to RAM_SIZE_16B := 0;
91signal event_size_ram_64b : integer range 0 to RAM_SIZE_64B := 0;
92signal event_size : integer range 0 to RAM_SIZE_16B := 0;
93
94signal drs_id : integer range 0 to 4 := 0;
95signal channel_id : integer range 0 to 9 := 0;
96signal channel_index : integer range 0 to 9 := 0;
97signal package_index : integer range 0 to 9 := 0;
98signal number_of_packages : integer range 0 to 9 := 0;
99signal max_events_ram : integer range 0 to 2048;
100signal events_in_ram : integer range 0 to 2048;
101signal event_start_addr : integer range 0 to (RAM_SIZE_64B - 1);
102signal write_start_addr : integer range 0 to (RAM_SIZE_16B - 1);
103
104
105signal roi_index : integer range 0 to 45 := 0;
106signal temp_roi : integer range 0 to 1024 := 0;
107
108-- SYNCH IN INPUT SIGNALS -----------------------------------------
109
110 signal config_start_sr : std_logic_vector(1 downto 0) := "00";
111 signal ram_write_ready_sr : std_logic_vector(1 downto 0) := "00";
112 signal wiz_read_ready_sr : std_logic_vector(1 downto 0) := "00";
113 signal dg_config_done_sr : std_logic_vector(1 downto 0) := "00";
114 -- no shift register, but local copy.
115 signal roi_array_local : roi_array_type;
116
117
118 signal state_sig : std_logic_vector( 3 downto 0 ) := "0000";
119
120BEGIN
121 state <= state_sig;
122
123 data_ram_empty <= '1' when events_in_ram = 0 else '0';
124
125 mm : process (clk)
126 begin
127 if rising_edge (clk) then
128 -- here: the synchin in of asynchronous input signals takes place.
129 config_start_sr <= config_start_sr(0) & config_start;
130 ram_write_ready_sr <= ram_write_ready_sr(0) & ram_write_ready;
131 wiz_read_ready_sr <= wiz_read_ready_sr(0) & wiz_read_done;
132 dg_config_done_sr <= dg_config_done_sr(0) & dg_config_done;
133 roi_array_local <= roi_array;
134
135 case state_mm is
136
137
138
139
140 when MM_CONFIG =>
141 state_sig <= X"1";
142
143
144 config_ready <= '0';
145 roi_max_array <= (others => 0);
146 channel_size <= (others => 0);
147 fifo_write_length <= (others => 0);
148 fifo_channels_array <= (others => 0);
149 event_size <= 0;
150 ram_write_ea <= '0';
151 wiz_write_ea <= '0';
152 state_mm <= MAX_ROI;
153
154
155 -- calculate max ROIs and channel sizes
156 when MAX_ROI =>
157 state_sig <= X"2";
158 roi_index <= (drs_id * 9) + channel_id;
159 state_mm <= MAX_ROI1;
160 when MAX_ROI1 =>
161 state_sig <= X"3";
162 temp_roi <= roi_array_local (roi_index);
163 state_mm <= MAX_ROI2;
164 when MAX_ROI2 =>
165 state_sig <= X"4";
166 if (channel_id < 9) then
167 if ( temp_roi > roi_max_array (channel_id)) then
168 roi_max_array (channel_id) <= temp_roi;
169 end if;
170 channel_size (channel_id) <= channel_size (channel_id) + temp_roi + CHANNEL_HEADER_SIZE;
171 drs_id <= drs_id + 1;
172 state_mm <= MAX_ROI;
173 if (drs_id = 3) then
174 drs_id <= 0;
175 channel_id <= channel_id + 1;
176 end if;
177 else
178 drs_id <= 0;
179 channel_id <= 0;
180 channel_size (0) <= channel_size (0) + PACKAGE_HEADER_LENGTH;
181 channel_size (8) <= channel_size (8) + PACKAGE_END_LENGTH;
182 state_mm <= FIFO_CALC;
183 end if;
184
185 -- calculate number of channels that fit in FIFO
186 when FIFO_CALC =>
187 state_sig <= X"5";
188 if (channel_id < 9) then
189 if ((fifo_write_length (package_index) + channel_size (channel_id)) <= W5300_TX_FIFO_SIZE) then
190 fifo_write_length (package_index) <= fifo_write_length (package_index) + channel_size (channel_id);
191 fifo_channels_array (package_index) <= fifo_channels_array (package_index) + 1;
192 channel_id <= channel_id + 1;
193 event_size <= event_size + channel_size (channel_id);
194 else
195 package_index <= package_index + 1;
196 end if;
197 else
198 number_of_packages <= package_index + 1;
199 package_index <= 0;
200 channel_index <= 0;
201 channel_id <= 0;
202 fifo_package_size_ram <= (others => 0);
203 fifo_package_size_ram (0) <= PACKAGE_HEADER_LENGTH + PACKAGE_HEADER_ZEROS;
204 event_size_ram <= 0;
205 event_size_ram_64b <= 0;
206 max_events_ram <= 0;
207 state_mm <= RAM_CALC;
208 end if;
209
210 when RAM_CALC =>
211 state_sig <= X"6";
212 if (package_index < number_of_packages) then
213 if (channel_index < fifo_channels_array (package_index)) then
214 fifo_package_size_ram (package_index) <=
215 fifo_package_size_ram (package_index) + ((roi_max_array (channel_id) + CHANNEL_HEADER_SIZE) * NUMBER_OF_DRS);
216 channel_index <= channel_index + 1;
217 channel_id <= channel_id + 1;
218 else
219 package_index <= package_index + 1;
220 event_size_ram <= event_size_ram + fifo_package_size_ram (package_index);
221 channel_index <= 0;
222 end if;
223 else
224 fifo_package_size_ram (package_index - 1) <= fifo_package_size_ram (package_index - 1) + PACKAGE_END_LENGTH + PACKAGE_END_ZEROS;
225 event_size_ram <= event_size_ram + PACKAGE_END_LENGTH + PACKAGE_END_ZEROS;
226 state_mm <= RAM_CALC1;
227 end if;
228 when RAM_CALC1 =>
229 state_sig <= X"7";
230 max_events_ram <= max_events_ram + 1;
231 if ((max_events_ram * event_size_ram) <= RAM_SIZE_16B) then
232 state_mm <= RAM_CALC1;
233 else
234 max_events_ram <= max_events_ram - 1;
235 state_mm <= RAM_CALC2;
236 end if;
237 when RAM_CALC2 =>
238 state_sig <= X"8";
239 event_size_ram_64b <= (event_size_ram / 4);
240 events_in_ram <= 0;
241 event_start_addr <= 0;
242 write_start_addr <= 0;
243 package_index <= 0;
244 channel_id <= 0;
245 ram_start_addr <= (others => '0');
246
247 package_length <= conv_std_logic_vector (event_size, 16);
248 for i in 0 to 8 loop
249 roi_max(i) <= conv_std_logic_vector(roi_max_array(i), 11);
250 end loop;
251 state_mm <= CONFIG_DG;
252
253 when CONFIG_DG =>
254 state_sig <= X"9";
255 dg_start_config <= '1';
256 state_mm <= CONFIG_DG;
257 if (dg_config_done_sr(1) = '0') then
258 dg_start_config <= '0';
259 state_mm <= WAIT_FOR_CONFIG_DG;
260 end if;
261
262 when WAIT_FOR_CONFIG_DG =>
263 state_sig <= X"E";
264 state_mm <= WAIT_FOR_CONFIG_DG;
265 if (dg_config_done_sr(1) = '1') then
266 state_mm <= UPDATE_OUTPUT;
267 end if;
268
269
270 when MM_MAIN =>
271 state_sig <= X"A";
272 state_mm <= MM_MAIN;
273
274 config_ready <= '1';
275
276 if (config_start_sr(1) = '1') then
277 state_mm <= MM_CONFIG;
278
279 elsif (ram_write_ready_sr(1) = '1') then
280 -- this is part of the DG - MM handshake.
281 -- pulling write_ea low shows that MM understood DG is ready
282 ram_write_ea <= '0';
283
284 events_in_ram <= events_in_ram + 1;
285 if ((event_start_addr + event_size_ram_64b) < (RAM_SIZE_64B - event_size_ram_64b)) then
286 event_start_addr <= event_start_addr + event_size_ram_64b;
287 else
288 event_start_addr <= 0;
289 end if;
290 state_mm <= WRITE_FIN;
291
292 elsif (wiz_read_ready_sr(1) = '1') then
293 wiz_write_ea <= '0';
294
295 if (package_index = (number_of_packages - 1)) then
296
297 -- next address
298 if ((write_start_addr + fifo_package_size_ram (package_index)) < (RAM_SIZE_16B - event_size_ram)) then
299 write_start_addr <= write_start_addr + fifo_package_size_ram (package_index);
300 else
301 write_start_addr <= 0;
302 end if;
303 else
304 write_start_addr <= write_start_addr + fifo_package_size_ram (package_index);
305 end if;
306
307 -- increase pack_index
308 -- the package_index goes from 0..NumOfPack-1
309
310 if ( package_index < (number_of_packages - 1)) then
311 package_index <= package_index + 1;
312 else
313 package_index <= 0;
314 events_in_ram <= events_in_ram - 1;
315 end if;
316
317
318
319
320 state_mm <= READ_FIN;
321
322 end if;
323
324 ------------------------- WRITING to MEM was finished ------------------------------------
325 ------------------------------------------------------------------------------------------
326 when WRITE_FIN =>
327 state_sig <= X"B";
328 ram_start_addr <= conv_std_logic_vector(event_start_addr, RAM_ADDR_WIDTH_64B);
329 -- 2nd part of hand shake is, that DG pulls low ram_write_ready
330 if (ram_write_ready_sr(1) = '0') then
331 state_mm <= UPDATE_OUTPUT;
332 end if;
333
334
335 ------------------------- READING from MEM was finished ----------------------------------
336 ------------------------------------------------------------------------------------------
337
338 when READ_FIN =>
339 state_sig <= X"C";
340 if (wiz_read_ready_sr(1) = '0') then
341
342
343 state_mm <= UPDATE_OUTPUT;
344 end if;
345
346
347
348
349 when UPDATE_OUTPUT =>
350
351
352 wiz_ram_start_addr <= conv_std_logic_vector(write_start_addr, RAM_ADDR_WIDTH_16B);
353 wiz_write_length <= conv_std_logic_vector(fifo_write_length (package_index), 17);
354 wiz_number_of_channels <= conv_std_logic_vector(fifo_channels_array (package_index), 4);
355
356 if (package_index = 0) then
357 -- first package -> write header
358 wiz_write_header <= '1';
359 else
360 wiz_write_header <= '0';
361 end if;
362
363 if (package_index = (number_of_packages - 1)) then
364 -- last package -> write end-flag
365 wiz_write_end <= '1';
366 else
367 wiz_write_end <= '0';
368 end if;
369
370 state_mm <= UPDATE_OUTPUT_2;
371
372
373 when UPDATE_OUTPUT_2 =>
374 state_sig <= X"D";
375 state_mm <= MM_MAIN;
376
377 if (events_in_ram > 0) then
378 wiz_write_ea <= '1';
379 else
380 wiz_write_ea <= '0';
381 end if;
382
383 if (events_in_ram < max_events_ram) then
384 ram_write_ea <= '1';
385 else
386 ram_write_ea <= '0';
387 end if;
388
389
390 when others =>
391 state_sig <= X"F";
392 state_mm <= MM_CONFIG;
393
394 end case; -- state_mm
395 end if;
396 end process mm;
397
398
399
400END ARCHITECTURE beha;
401
Note: See TracBrowser for help on using the repository browser.