source: firmware/FAD/FACT_FAD_lib/hdl/mod7_beha.vhd@ 13232

--
-- VHDL Architecture FACT_FAD_lib.mod7.beha
--
-- Created:
--          by - dneise.UNKNOWN (E5B-LABOR6)
--          at - 09:55:28 16.02.2011
--
-- using Mentor Graphics HDL Designer(TM) 2009.2 (Build 10)
--
LIBRARY ieee;
USE ieee.std_logic_1164.all;
--USE ieee.std_logic_arith.all;
USE ieee.std_logic_unsigned.all;

ENTITY mod7 IS
        PORT( 
                        clk            : IN     std_logic;
                        
                        number  : in std_logic_vector(31 downto 0);
                        start : in std_logic;
        
                        remainder : out std_logic_vector(2 downto 0) := (others => '0');
                        started : out std_logic := '0';
                        valid : out std_logic :='0'
                        );
END ENTITY mod7;

--
ARCHITECTURE beha OF mod7 IS
        signal local_number : std_logic_vector (32 downto 0) := (OTHERS => '0'); --33bit number, easy to divide into 3bit-words
        
        type state_type is (
                                                        IDLE_STATE, 
                                                        SUBMOD1_STATE,
                                                        SUM1_STATE,
                                                        SUBMOD2_STATE,
                                                        SUM2_STATE,
                                                        SUBMOD3_STATE,
                                                        SUM3_STATE,
                                                        RESULT_STATE);

        signal state : state_type := IDLE_STATE;
        
        signal sum1  : std_logic_vector (8 downto 0) := (OTHERS => '0'); -- eigentlich reichen 7bit, aber 9 lassen sich leichter teilen
        signal sum2  : std_logic_vector (5 downto 0) := (OTHERS => '0'); -- eigentlich reichen 4 bit, aber 6 lassen sich leichter teilen
        signal sum3  : std_logic_vector (2 downto 0) := (OTHERS => '0'); 
        signal result  : std_logic_vector (2 downto 0) := (OTHERS => '0'); 
        
        type sm1_type is        array (0 to 10) of std_logic_vector (8 downto 0);  -- eigentlich sind es 3 bit werte, aber wenn ich summiere brauche ich die breite (fast)
        type sm2_type is        array (0 to 2) of std_logic_vector (5 downto 0); -- eigentlich sind es 3 bit werte, aber wenn ich summiere brauche ich die breite (fast)
        type sm3_type is        array (0 to 1) of std_logic_vector (2 downto 0);
        
                
        signal submod1 : sm1_type := (others => "000000000");
        signal submod2 : sm2_type := (others => "000000");
        signal submod3 : sm3_type := (others => "000");
        
        
BEGIN
        remainder <= result;
        
        process (clk)
                begin

                        
                        if rising_edge(clk) then
                        
                                case state is
                                        
                                        when IDLE_STATE =>
                                                started         <= '0';
                                                if (start = '1') then 
                                                        started         <= '1';
                                                        valid           <= '0';
                                                        local_number <= '0' & number;
                                                        state <= SUBMOD1_STATE;
                                                else 
                                                        state <= IDLE_STATE;
                                                end if;

                                        when SUBMOD1_STATE =>
                                                for i in 0 to 10 loop
                                                        if (local_number( 3*i+2 downto 3*i ) = "111" ) then
                                                                submod1(i) <= "000000000";
                                                        else
                                                                submod1(i) <= "000000" & local_number( 3*i+2 downto 3*i );
                                                        end if;
                                                end loop;
                                                state <= SUM1_STATE;

                                        when SUM1_STATE =>
                                                sum1 <= submod1(0) +
                                                                                submod1(1) + 
                                                                                submod1(2) + 
                                                                                submod1(3) + 
                                                                                submod1(4) + 
                                                                                submod1(5) + 
                                                                                submod1(6) + 
                                                                                submod1(7) + 
                                                                                submod1(8) + 
                                                                                submod1(9) + 
                                                                                submod1(10);
                                                
                                                state <= SUBMOD2_STATE;
                                                                                 
                                        when SUBMOD2_STATE =>
                                        for i in 0 to 2 loop
                                                if (sum1( 3*i+2 downto 3*i ) = "111" ) then
                                                        submod2(i) <= "000000";
                                                else
                                                        submod2(i) <= "000" & sum1( 3*i+2 downto 3*i );
                                                end if;
                                        end loop;
                                        state <= SUM2_STATE;

                                        when SUM2_STATE =>
                                                sum2 <= submod2(0) +    submod2(1) +  submod2(2);
                                                state <= SUBMOD3_STATE;

                                        when SUBMOD3_STATE =>
                                                for i in 0 to 1 loop
                                                        if (sum2( 3*i+2 downto 3*i ) = "111" ) then
                                                                submod3(i) <= "000";
                                                        else
                                                                submod3(i) <= sum2( 3*i+2 downto 3*i );
                                                        end if;
                                                end loop;
                                                state <= SUM3_STATE;

                                        when SUM3_STATE =>
                                                sum3 <= submod3(0) +    submod3(1);
                                                state <= RESULT_STATE; 

                                        when RESULT_STATE =>
                                                started         <= '0';
                                                valid           <= '1';
                                                if (sum3( 2 downto 0 ) = "111" ) then
                                                        result <= "000";
                                                else
                                                        result <= sum3( 2 downto 0 );
                                                end if;
                                                state <= IDLE_STATE; 
                                        
                                        when others =>
                                                null;
                                        end case;
                                        
                        end if;
                end process;
                                
END ARCHITECTURE beha;