source: firmware/FAD/stable/FACT_FAD/FACT_FAD_lib/hdl/fad_definitions.vhd@ 10108

Last change on this file since 10108 was 260, checked in by dneise, 14 years ago
possible to switch off SPI SCLK now. see new revision of simple_daq in tools/FAD/
File size: 6.4 KB
Line 
1-- Package File Template
2--
3-- Purpose: This package defines supplemental types, subtypes,
4-- constants, and functions
5
6
7library IEEE;
8use IEEE.STD_LOGIC_1164.all;
9use IEEE.STD_LOGIC_ARITH.ALL;
10use IEEE.STD_LOGIC_UNSIGNED.ALL;
11-- use IEEE.NUMERIC_STD.ALL;
12
13package fad_definitions is
14
15
16-- Declare constants
17
18 type mac_type is array (0 to 2) of std_logic_vector (15 downto 0);
19 type ip_type is array (0 to 3) of integer;
20-- Network Settings
21
22 constant MAC_ADDRESS : mac_type := (X"0011", X"9561", X"97B4");
23
24 -- @ ETH zurich
25 -- constant NETMASK : ip_type := (255, 255, 248, 0);
26 -- constant IP_ADDRESS : ip_type := (192, 33, 99, 225);
27 -- constant GATEWAY : ip_type := (192, 33, 96, 1);
28
29 -- @ TU Dortmund
30 constant NETMASK : ip_type := (255, 255, 255, 0);
31 constant IP_ADDRESS : ip_type := (129, 217, 160, 119);
32 constant GATEWAY : ip_type := (129, 217, 160, 1);
33
34 constant FIRST_PORT : integer := 5000;
35-- Network Settings End
36
37 constant PACKAGE_VERSION : std_logic_vector(7 downto 0) := X"01";
38 constant PACKAGE_SUB_VERSION : std_logic_vector(7 downto 0) := X"02";
39 constant PACKAGE_HEADER_LENGTH : integer := 22;
40 constant PACKAGE_END_LENGTH : integer := 2; -- CRC and END-Flag
41
42 constant W5300_S_INC : std_logic_vector(6 downto 0) := "1000000"; -- socket address offset
43
44-- W5300 Registers
45 constant W5300_BASE_ADR : std_logic_vector (9 downto 0) := (others => '0');
46 constant W5300_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"0";
47 constant W5300_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2";
48 constant W5300_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"4";
49 constant W5300_SHAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"8";
50 constant W5300_GAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"10";
51 constant W5300_SUBR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"14";
52 constant W5300_SIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"18";
53 constant W5300_RTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1C";
54 constant W5300_RCR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1E";
55 constant W5300_TMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"20";
56 constant W5300_TMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"22";
57 constant W5300_TMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"24";
58 constant W5300_TMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"26";
59 constant W5300_RMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"28";
60 constant W5300_RMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2A";
61 constant W5300_RMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2C";
62 constant W5300_RMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2E";
63 constant W5300_MTYPER : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"30";
64
65 constant W5300_S0_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"0";
66 constant W5300_S0_CR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2";
67 constant W5300_S0_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"4";
68 constant W5300_S0_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"6";
69 constant W5300_S0_SSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"8";
70 constant W5300_S0_PORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"A";
71 constant W5300_S0_DPORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"12";
72 constant W5300_S0_DIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"14";
73 constant W5300_S0_TX_WRSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"20";
74 constant W5300_S0_TX_FSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"24";
75 constant W5300_S0_RX_RSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"28";
76 constant W5300_S0_TX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2E";
77 constant W5300_S0_RX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"30";
78-- End W5300 registers
79
80--
81 constant W5300_TX_FIFO_SIZE : integer := (15360 / 2); -- Socket TX FIFO-Size in 16 Bit Words
82
83 constant LOG2_OF_RAM_SIZE_64B : integer := 15;
84 --constant RAM_SIZE_64B : integer := 2**LOG2_OF_RAM_SIZE_64B;
85 constant RAM_SIZE_64B : integer := 24576;
86 constant RAM_SIZE_16B : integer := RAM_SIZE_64B * 4;
87
88-- TYPE definitions
89 type roi_max_type is array (0 to 8) of std_logic_vector (10 downto 0);
90 type roi_array_type is array (0 to 35) of integer range 0 to 1024;
91 type drs_s_cell_array_type is array (0 to 3) of std_logic_vector (9 downto 0);
92 type adc_data_array_type is array (0 to 3) of std_logic_vector (11 downto 0);
93
94 type dac_array_type is array (0 to 7) of integer range 0 to 2**16 - 1;
95 type sensor_array_type is array (0 to 3) of integer range 0 to 2**16 - 1;
96
97-- constant DEFAULT_ROI : roi_array_type := (115, 125, 100, 102, 155, 101, 0, 101, 106,
98-- 181, 121, 189, 101, 101, 187, 56, 187, 101,
99-- 2, 141, 101, 100, 10, 100, 178, 101, 174,
100-- 12, 181, 100, 102, 101, 102, 0, 101, 108);
101-- constant DEFAULT_ROI : roi_array_type := (others => 100);
102 constant DEFAULT_ROI : roi_array_type := (others => 210);
103
104 constant DEFAULT_DAC : dac_array_type := (20972, 34079, 20526, 0, 28836, 28836, 28836, 28836);
105 --constant DEFAULT_DAC : dac_array_type := (others => 0);
106
107 constant DEFAULT_DRSADDR : std_logic_vector (3 downto 0):= "0000";
108 constant DEFAULT_DRSADDR_MODE : std_logic := '0';
109
110
111
112-- Commands
113 constant CMD_START : std_logic_vector := X"C0";
114 constant CMD_STOP : std_logic_vector := X"30";
115 constant CMD_TRIGGER : std_logic_vector := X"A0";
116
117 constant CMD_TRIGGER_C : std_logic_vector := X"B0";
118 constant CMD_TRIGGER_S : std_logic_vector := X"20";
119 constant CMD_READ : std_logic_vector := X"0A";
120 constant CMD_WRITE : std_logic_vector := X"05";
121
122 constant CMD_DENABLE : std_logic_vector := X"06";
123 constant CMD_DDISABLE : std_logic_vector := X"07";
124 constant CMD_DWRITE_RUN : std_logic_vector := X"08";
125 constant CMD_DWRITE_STOP : std_logic_vector := X"09";
126 constant CMD_SCLK_ON : std_logic_vector := X"10";
127 constant CMD_SCLK_OFF : std_logic_vector := X"11";
128
129
130-- Declare functions and procedure
131
132
133end fad_definitions;
134
135
Note: See TracBrowser for help on using the repository browser.