source: firmware/FTM/Timing_counters/Timing_counter.vhd@ 14271

Last change on this file since 14271 was 10779, checked in by weitzel, 14 years ago
some changes in FTM Timing_counter
File size: 3.9 KB
Line 
1----------------------------------------------------------------------------------
2-- Company: ETH Zurich, Institute for Particle Physics
3-- Engineer: Patrick Vogler
4--
5-- Create Date: March 11 2011
6-- Design Name:
7-- Module Name: FTM Timing counter
8-- Project Name:
9-- Target Devices:
10-- Tool versions:
11-- Description: 48 bit counter for time stamping and on-time counting
12--
13-- Dependencies:
14--
15-- Revision:
16-- Revision 0.01 - File Created
17-- Additional Comments:
18--
19--
20-- modifications:
21--
22-- April 12 2011 by Patrick Vogler
23--
24-- May 18 2011 by Patrick Vogler
25--
26-- May 20, 2011, by Q. Weitzel
27-- counting was wrong by one clock cycle (1 us)
28--
29-- May 23, 2011, by Q. Weitzel
30-- counter reset changed from async to sync reset
31-- reset, enable and read_counter removed from sensitity lists
32--
33----------------------------------------------------------------------------------
34
35library IEEE;
36use IEEE.STD_LOGIC_1164.ALL;
37use IEEE.STD_LOGIC_ARITH.ALL;
38use IEEE.STD_LOGIC_UNSIGNED.ALL;
39
40use IEEE.NUMERIC_STD.ALL;
41
42---- Uncomment the following library declaration if instantiating
43---- any Xilinx primitives in this code.
44library UNISIM;
45use UNISIM.VComponents.all;
46
47library ftm_definitions;
48USE ftm_definitions.ftm_array_types.all;
49USE ftm_definitions.ftm_constants.all;
50
51
52entity Timing_counter is
53 port(
54
55-- Clock
56-------------------------------------------------------------------------------
57 clk : in STD_LOGIC; -- 50 MHz system clock
58
59 enable : in STD_LOGIC; -- enable counter
60 reset : in Std_LOGIC; -- reset counter
61
62 -- handshake signal
63 read_counter : in STD_LOGIC; -- read counter
64 reading_started : out STD_LOGIC;
65 reading_valid : out STD_LOGIC; -- counter reading at output ready
66
67 -- counter reading
68 counter_reading : out std_logic_vector (TC_WIDTH - 1 downto 0)
69 );
70end Timing_counter;
71
72
73architecture Behavioral of Timing_counter is
74
75type type_read_counter_state is (IDLE, COPY, SET_VALID, RESET_STARTED);
76signal read_counter_state : type_read_counter_state := IDLE;
77
78signal counting : std_logic_vector (TC_WIDTH - 1 downto 0) := (others => '0');
79signal counter_reading_sig : std_logic_vector (TC_WIDTH - 1 downto 0) := (others => '0');
80signal precounting : std_logic_vector (PRECOUNT_WIDTH - 1 downto 0) := (others => '0');
81
82
83begin
84-- counting
85-------------------------------------------------------------------------------
86 count : process (clk)
87 begin
88
89 if rising_edge(clk) then
90 if (reset = '1') then
91 counting <= (others => '0');
92 precounting <= (others => '0');
93 elsif enable = '1' then
94 precounting <= precounting + 1;
95 if (precounting = (PRECOUNT_DIVIDER - 1)) then
96 counting <= counting + 1;
97 precounting <= (others => '0');
98 end if;
99 end if;
100 end if;
101
102 end process count;
103
104-- read counter
105-------------------------------------------------------------------------------
106 readout_counter : process (clk)
107 begin
108 if rising_edge(clk) then
109 case read_counter_state is
110
111 when IDLE =>
112 if read_counter = '1' then
113 reading_valid <= '0';
114 reading_started <= '1';
115 read_counter_state <= COPY;
116 end if;
117
118 when COPY =>
119 counter_reading_sig <= counting;
120 read_counter_state <= SET_VALID;
121
122 when SET_VALID =>
123 read_counter_state <= RESET_STARTED;
124
125 when RESET_STARTED =>
126 if read_counter = '0' then
127 reading_started <= '0';
128 reading_valid <= '1';
129 read_counter_state <= IDLE;
130 end if;
131
132 end case;
133 end if;
134end process readout_counter;
135
136counter_reading <= counter_reading_sig;
137
138end Behavioral;
Note: See TracBrowser for help on using the repository browser.