######################################################## # FTM Board # FACT Trigger Master # # Pin location constraints # # by Patrick Vogler, 18 August 2010 # # modified by Q. Weitzel, 01 March 2011 # (NET W_A<0> added and assigned to unconnected pin) ######################################################## #Clock ####################################################### NET clk LOC = Y14 | IOSTANDARD=LVCMOS33; # FPGA-CLK from oscillator U47 # Ethernet Interface # connection to the WIZnet W5300 ethernet controller (U37) # on IO-Bank 1 ####################################################### # data bus NET W_D<0> LOC = M22 | IOSTANDARD=LVCMOS33; # 16-bit data bus to W5300 NET W_D<1> LOC = L22 | IOSTANDARD=LVCMOS33; # NET W_D<2> LOC = K23 | IOSTANDARD=LVCMOS33; # NET W_D<3> LOC = K25 | IOSTANDARD=LVCMOS33; # NET W_D<4> LOC = K26 | IOSTANDARD=LVCMOS33; # NET W_D<5> LOC = J22 | IOSTANDARD=LVCMOS33; # NET W_D<6> LOC = J23 | IOSTANDARD=LVCMOS33; # NET W_D<7> LOC = G23 | IOSTANDARD=LVCMOS33; # NET W_D<8> LOC = G24 | IOSTANDARD=LVCMOS33; # NET W_D<9> LOC = F24 | IOSTANDARD=LVCMOS33; # NET W_D<10> LOC = F25 | IOSTANDARD=LVCMOS33; # NET W_D<11> LOC = E24 | IOSTANDARD=LVCMOS33; # NET W_D<12> LOC = E26 | IOSTANDARD=LVCMOS33; # NET W_D<13> LOC = D24 | IOSTANDARD=LVCMOS33; # NET W_D<14> LOC = D26 | IOSTANDARD=LVCMOS33; # NET W_D<15> LOC = D25 | IOSTANDARD=LVCMOS33; # # W5300 address bus NET W_A<0> LOC = U18 | IOSTANDARD=LVCMOS33; # there is no real net W_A0 because NET W_A<1> LOC = AA25 | IOSTANDARD=LVCMOS33; # the W5300 is operated in the 16-bit mode NET W_A<2> LOC = AA24 | IOSTANDARD=LVCMOS33; # (see W5300 datasheet) NET W_A<3> LOC = AA23 | IOSTANDARD=LVCMOS33; # -> W_A<0> assigned to unconnected pin NET W_A<4> LOC = Y25 | IOSTANDARD=LVCMOS33; # NET W_A<5> LOC = Y24 | IOSTANDARD=LVCMOS33; # NET W_A<6> LOC = Y23 | IOSTANDARD=LVCMOS33; # NET W_A<7> LOC = W23 | IOSTANDARD=LVCMOS33; # NET W_A<8> LOC = V25 | IOSTANDARD=LVCMOS33; # NET W_A<9> LOC = V24 | IOSTANDARD=LVCMOS33; # # W5300 control signals # the signals W_INT, W_RD, W_WR and W_RES also go to testpoints T17 # W_CS is also routed to testpoint JP7 NET W_CS LOC = T20 | IOSTANDARD=LVCMOS33; # W5300 chip select NET W_INT LOC = U22 | IOSTANDARD=LVCMOS33; # interrupt NET W_RD LOC = R20 | IOSTANDARD=LVCMOS33; # read NET W_WR LOC = P22 | IOSTANDARD=LVCMOS33; # write NET W_RES LOC = U23 | IOSTANDARD=LVCMOS33; # reset W5300 chip # W5300 buffer ready indicator # NET W_BRDY<0> LOC = AB26 | IOSTANDARD=LVCMOS33; # # NET W_BRDY<1> LOC = AC26 | IOSTANDARD=LVCMOS33; # # NET W_BRDY<2> LOC = AC25 | IOSTANDARD=LVCMOS33; # # NET W_BRDY<3> LOC = AD26 | IOSTANDARD=LVCMOS33; # # W5300 associated testpoints # NET W_T<0> LOC = N21 | IOSTANDARD=LVCMOS33; # # NET W_T<1> LOC = M21 | IOSTANDARD=LVCMOS33; # # NET W_T<2> LOC = K21 | IOSTANDARD=LVCMOS33; # # NET W_T<3> LOC = R19 | IOSTANDARD=LVCMOS33; # # SPI Interface # connection to the EEPROM U36 (AL25L016M) and the temperature # sensors U45, U46, U48 and U49 (all MAX6662) # on IO-Bank 1 ####################################################### # NET S_CLK LOC = U20 | IOSTANDARD=LVCMOS33; # SPI clock # EEPROM # NET MOSI LOC = AA22 | IOSTANDARD=LVCMOS33; # master out slave in # NET MISO LOC = V22 | IOSTANDARD=LVCMOS33; # master in slave out # NET EE_CS LOC = G22 | IOSTANDARD=LVCMOS33; # master out slave in # temperature sensors # NET SIO LOC = F22 | IOSTANDARD=LVCMOS33; # serial IO # NET TS_CS<0> LOC = H21 | IOSTANDARD=LVCMOS33; # temperature sensors chip select0 # NET TS_CS<1> LOC = J21 | IOSTANDARD=LVCMOS33; # temperature sensors chip select1 # NET TS_CS<2> LOC = C25 | IOSTANDARD=LVCMOS33; # temperature sensors chip select2 # NET TS_CS<3> LOC = C26 | IOSTANDARD=LVCMOS33; # temperature sensors chip select3 # Trigger primitives inputs # on IO-Bank 2 ####################################################### # crate 0 # crate A NET Trig_Prim_A<0> LOC = AC6 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<0> NET Trig_Prim_A<1> LOC = AD6 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<1> NET Trig_Prim_A<2> LOC = AF3 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<2> NET Trig_Prim_A<3> LOC = AE4 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<3> NET Trig_Prim_A<4> LOC = AE6 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<4> NET Trig_Prim_A<5> LOC = AE7 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<5> NET Trig_Prim_A<6> LOC = AE8 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<6> NET Trig_Prim_A<7> LOC = AC8 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<7> NET Trig_Prim_A<8> LOC = AC11 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<8> NET Trig_Prim_A<9> LOC = AD11 | IOSTANDARD=LVCMOS33; # Trig_Prim_0_<9> # crate 1 # crate B NET Trig_Prim_B<0> LOC = AB16 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<0> NET Trig_Prim_B<1> LOC = AC15 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<1> NET Trig_Prim_B<2> LOC = AC16 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<2> NET Trig_Prim_B<3> LOC = AE17 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<3> NET Trig_Prim_B<4> LOC = AD19 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<4> NET Trig_Prim_B<5> LOC = AE19 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<5> NET Trig_Prim_B<6> LOC = AE20 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<6> NET Trig_Prim_B<7> LOC = AF20 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<7> NET Trig_Prim_B<8> LOC = AD21 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<8> NET Trig_Prim_B<9> LOC = AE23 | IOSTANDARD=LVCMOS33; # Trig_Prim_1_<9> # crate 2 # crate C NET Trig_Prim_C<0> LOC = AF23 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<0> NET Trig_Prim_C<1> LOC = AC21 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<1> NET Trig_Prim_C<2> LOC = AE21 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<2> NET Trig_Prim_C<3> LOC = AD20 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<3> NET Trig_Prim_C<4> LOC = AC20 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<4> NET Trig_Prim_C<5> LOC = AF19 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<5> NET Trig_Prim_C<6> LOC = AC19 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<6> NET Trig_Prim_C<7> LOC = AD17 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<7> NET Trig_Prim_C<8> LOC = AD14 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<8> NET Trig_Prim_C<9> LOC = AC14 | IOSTANDARD=LVCMOS33; # Trig_Prim_2_<9> # crate 3 # crate D NET Trig_Prim_D<0> LOC = AB12 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<0> NET Trig_Prim_D<1> LOC = AC12 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<1> NET Trig_Prim_D<2> LOC = AC9 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<2> NET Trig_Prim_D<3> LOC = AB9 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<3> NET Trig_Prim_D<4> LOC = AB7 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<4> NET Trig_Prim_D<5> LOC = AF8 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<5> NET Trig_Prim_D<6> LOC = AF4 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<6> NET Trig_Prim_D<7> LOC = AF5 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<7> NET Trig_Prim_D<8> LOC = AD7 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<8> NET Trig_Prim_D<9> LOC = AE3 | IOSTANDARD=LVCMOS33; # Trig_Prim_3_<9> # NIM inputs ####################################################### # on IO-Bank 3 NET ext_Trig<1> LOC = B1 | IOSTANDARD=LVCMOS33; # NET ext_Trig<2> LOC = B2 | IOSTANDARD=LVCMOS33; # NET Veto LOC = E4 | IOSTANDARD=LVCMOS33; # # NET NIM_In<0> LOC = D3 | IOSTANDARD=LVCMOS33; # # NET NIM_In<1> LOC = F4 | IOSTANDARD=LVCMOS33; # # NET NIM_In<2> LOC = E3 | IOSTANDARD=LVCMOS33; # # on IO-Bank 0 # input pin with global clock buffer available # NET NIM_In3_GCLK LOC = K14 | IOSTANDARD=LVCMOS33; # LEDs # on IO-Banks 0 and 3 ####################################################### # red NET LED_red<0> LOC = D6 | IOSTANDARD=LVCMOS33; # IO-Bank 0 NET LED_red<1> LOC = A4 | IOSTANDARD=LVCMOS33; # IO-Bank 0 NET LED_red<2> LOC = E1 | IOSTANDARD=LVCMOS33; # IO-Bank 3 NET LED_red<3> LOC = J5 | IOSTANDARD=LVCMOS33; # IO-Bank 3 # yellow NET LED_ye<0> LOC = C5 | IOSTANDARD=LVCMOS33; # IO-Bank 0 NET LED_ye<1> LOC = B3 | IOSTANDARD=LVCMOS33; # IO-Bank 0 # green NET LED_gn<0> LOC = B4 | IOSTANDARD=LVCMOS33; # IO-Bank 0 NET LED_gn<1> LOC = A3 | IOSTANDARD=LVCMOS33; # IO-Bank 0 # Clock conditioner LMK03000 # on IO-Bank 3 ####################################################### NET CLK_Clk_Cond LOC = G4 | IOSTANDARD=LVCMOS33; # IO-Bank 3 NET LE_Clk_Cond LOC = F2 | IOSTANDARD=LVCMOS33; # IO-Bank 3 NET LD_Clk_Cond LOC = J4 | IOSTANDARD=LVCMOS33; # IO-Bank 3 NET DATA_Clk_Cond LOC = F3 | IOSTANDARD=LVCMOS33; # IO-Bank 3 NET SYNC_Clk_Cond LOC = H2 | IOSTANDARD=LVCMOS33; # IO-Bank 3 # various RS-485 Interfaces # on IO-Bank 3 ####################################################### # Bus 1: FTU slow control NET Bus1_Tx_En LOC = H1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus1_Rx_En LOC = G3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 0 NET Bus1_RxD_0 LOC = K3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus1_TxD_0 LOC = L3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 1 NET Bus1_RxD_1 LOC = M2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus1_TxD_1 LOC = N4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 2 NET Bus1_RxD_2 LOC = P3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus1_TxD_2 LOC = P4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 3 NET Bus1_RxD_3 LOC = T4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus1_TxD_3 LOC = T3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # Bus 2: Trigger-ID to FAD boards NET Bus2_Tx_En LOC = K2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus2_Rx_En LOC = K4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 0 NET Bus2_RxD_0 LOC = L4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus2_TxD_0 LOC = M3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 1 NET Bus2_RxD_1 LOC = N2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus2_TxD_1 LOC = N1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 2 NET Bus2_RxD_2 LOC = R2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus2_TxD_2 LOC = R1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # crate 3 NET Bus2_RxD_3 LOC = U4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Bus2_TxD_3 LOC = U2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # auxiliary access # NET Aux_Rx_D LOC = W3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET Aux_Tx_D LOC = Y2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET Aux_Rx_En LOC = W4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # Rx- and Tx enable # NET Aux_Tx_En LOC = V1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # also for auxiliary Trigger-ID # auxiliary Trigger-ID (i.e. to send the Trigger-ID to the counting hut/house/container) # NET TrID_Rx_D LOC = U6 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET TrID_Tx_D LOC = T7 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # Crate-Resets # on IO-Bank 3 ####################################################### # NET Crate_Res0 LOC = M1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET Crate_Res1 LOC = P1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET Crate_Res2 LOC = R3 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NET Crate_Res3 LOC = V2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # Busy signals from the FAD boards # on IO-Bank 3 ####################################################### NET Busy0 LOC = M4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Busy1 LOC = P2 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Busy2 LOC = R4 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # NET Busy3 LOC = U1 | IOSTANDARD=LVCMOS33 | SLEW = SLOW ; # # NIM outputs # on IO-Bank 0 # LVDS output at the FPGA followed by LVDS to NIM # conversion stage ####################################################### # calibration # NET Cal_NIM1_p LOC = D18 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # Cal_NIM1+ # NET Cal_NIM1_n LOC = C18 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # Cal_NIM1- # NET Cal_NIM2_p LOC = B18 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # Cal_NIM2+ # NET Cal_NIM2_n LOC = A18 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # Cal_NIM2- # auxiliarry / spare NIM outputs # NET NIM_Out0_p LOC = C17 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # NIM_Out0+ # NET NIM_Out0_n LOC = B17 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # NIM_Out0- # NET NIM_Out1_p LOC = D17 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # NIM_Out1+ # NET NIM_Out1_n LOC = C16 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # NIM_Out1- # fast control signal outputs # LVDS output at the FPGA followed by LVDS to NIM # conversion stage ####################################################### # NET RES_p LOC = D16 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # RES+ Reset # NET RES_n LOC = C15 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # RES- IO-Bank 0 NET TRG_p LOC = B15 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # TRG+ Trigger NET TRG_n LOC = A15 | IOSTANDARD=LVDS_33 | DIFF_TERM="False"; # TRG- IO-Bank 0 NET TIM_Run_p LOC = AF25 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # TIM_Run+ Time Marker NET TIM_Run_n LOC = AE25 | IOSTANDARD=LVDS_33 | DIFF_TERM="False" ; # TIM_Run- on IO-Bank2 NET TIM_Sel LOC = AD22 | IOSTANDARD=LVCMOS33; # Time Marker selector IO-Bank 2 # NET CLD_FPGA LOC = AA14 | IOSTANDARD=LVCMOS33; # DRS-Clock feedback into FPGA # LVDS calibration outputs # on IO-Bank 0 ####################################################### # to connector J13 # NET Cal_0_p LOC = D22 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_0+ # NET Cal_0_n LOC = C22 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_0- # NET Cal_1_p LOC = D23 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_1+ # NET Cal_1_n LOC = C23 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_1- # NET Cal_2_p LOC = B23 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_2+ # NET Cal_2_n LOC = A22 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_2- # NET Cal_3_p LOC = C21 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_3+ # NET Cal_3_n LOC = B21 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_3- # to connector J12 # NET Cal_4_p LOC = E21 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_4+ # NET Cal_4_n LOC = D21 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_4- # NET Cal_5_p LOC = D20 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_5+ # NET Cal_5_n LOC = C20 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_5- # NET Cal_6_p LOC = B20 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_6+ # NET Cal_6_n LOC = A20 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_6- # NET Cal_7_p LOC = B19 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_7+ # NET Cal_7_n LOC = A19 | IOSTANDARD=LVDS_33 | DIFF_TERM=No ; # Cal_7- # Testpoints ###################################################### # Connector T7 # IO-Bank 0 # NET TP<0> LOC = B14 | IOSTANDARD=LVCMOS33; # # NET TP<1> LOC = A14 | IOSTANDARD=LVCMOS33; # # NET TP<2> LOC = C13 | IOSTANDARD=LVCMOS33; # # NET TP<3> LOC = B13 | IOSTANDARD=LVCMOS33; # # Connector T10 # IO-Bank 0 # NET TP<4> LOC = D13 | IOSTANDARD=LVCMOS33; # # NET TP<5> LOC = C12 | IOSTANDARD=LVCMOS33; # # NET TP<6> LOC = B12 | IOSTANDARD=LVCMOS33; # # NET TP<7> LOC = A12 | IOSTANDARD=LVCMOS33; # # on Connector T12 # IO-Bank 0 # NET TP<8> LOC = D11 | IOSTANDARD=LVCMOS33; # # NET TP<9> LOC = C11 | IOSTANDARD=LVCMOS33; # # on Connector T14 # IO-Bank 0 # NET TP<10> LOC = D10 | IOSTANDARD=LVCMOS33; # # NET TP<11> LOC = C10 | IOSTANDARD=LVCMOS33; # # NET TP<12> LOC = A10 | IOSTANDARD=LVCMOS33; # # NET TP<13> LOC = B10 | IOSTANDARD=LVCMOS33; # # on Connector T16 # IO-Bank 0 # NET TP<14> LOC = A9 | IOSTANDARD=LVCMOS33; # # NET TP<15> LOC = B9 | IOSTANDARD=LVCMOS33; # # NET TP<16> LOC = A8 | IOSTANDARD=LVCMOS33; # # NET TP<17> LOC = B8 | IOSTANDARD=LVCMOS33; # # on Connector T8 # IO-Bank 0 # NET TP<18> LOC = C8 | IOSTANDARD=LVCMOS33; # # NET TP<19> LOC = D8 | IOSTANDARD=LVCMOS33; # # NET TP<20> LOC = C6 | IOSTANDARD=LVCMOS33; # # NET TP<21> LOC = B6 | IOSTANDARD=LVCMOS33; # # on Connector T9 # IO-Bank 0 # NET TP<22> LOC = C7 | IOSTANDARD=LVCMOS33; # # NET TP<23> LOC = B7 | IOSTANDARD=LVCMOS33; # # on Connector T11 # IO-Bank 3 # NET TP<24> LOC = Y1 | IOSTANDARD=LVCMOS33; # # NET TP<25> LOC = AA3 | IOSTANDARD=LVCMOS33; # # NET TP<26> LOC = AA2 | IOSTANDARD=LVCMOS33; # # NET TP<27> LOC = AC1 | IOSTANDARD=LVCMOS33; # # on Connector T13 # IO-Bank 3 # NET TP<28> LOC = AB1 | IOSTANDARD=LVCMOS33; # # NET TP<29> LOC = AC3 | IOSTANDARD=LVCMOS33; # # NET TP<30> LOC = AC2 | IOSTANDARD=LVCMOS33; # # NET TP<31> LOC = AD2 | IOSTANDARD=LVCMOS33; # # on Connector T15 # NET TP<32> LOC = AD1 | IOSTANDARD=LVCMOS33; # IO-Bank 3 # NET TP_in<33> LOC = AE2 | IOSTANDARD=LVCMOS33; # input only # NET TP_in<34> LOC = AE1 | IOSTANDARD=LVCMOS33; # input only # Board ID - inputs # local board-ID "solder programmable" # all on 'input only' pins ####################################################### # NET brd_id<0> LOC = A13 | IOSTANDARD=LVCMOS33; # # NET brd_id<1> LOC = A17 | IOSTANDARD=LVCMOS33; # # NET brd_id<2> LOC = D12 | IOSTANDARD=LVCMOS33; # # NET brd_id<3> LOC = N25 | IOSTANDARD=LVCMOS33; # # NET brd_id<4> LOC = N26 | IOSTANDARD=LVCMOS33; # # NET brd_id<5> LOC = K24 | IOSTANDARD=LVCMOS33; # # NET brd_id<6> LOC = H24 | IOSTANDARD=LVCMOS33; # # NET brd_id<7> LOC = Y26 | IOSTANDARD=LVCMOS33; #