source: firmware/FTM/ftm_definitions.vhd@ 18558

Last change on this file since 18558 was 12029, checked in by weitzel, 13 years ago
FTM: firmware version 6 committed with new IP address and LEDs off
File size: 25.2 KB
Line 
1----------------------------------------------------------------------------------
2-- Company: ETH Zurich, Institute for Particle Physics
3-- Engineer: Q. Weitzel
4--
5-- Create Date: February 2011
6-- Design Name:
7-- Module Name: ftm_definitions
8-- Project Name:
9-- Target Devices:
10-- Tool versions:
11-- Description: library file for FTM design
12--
13-- Dependencies:
14--
15-- Revision:
16-- Revision 0.01 - File Created
17-- Additional Comments:
18--
19-- modified: Patrick Vogler, February 17 2011
20-- merged with library file from Dortmund, Q. Weitzel, February 24, 2011
21--
22-- kw 25.02.: changes for HDL-Designer (use FACT_FTM.lib.ftm_...),
23-- DD_BLOCK_SIZE added (set to 0x008 for first tests), SD_ADDR_coin_win_[p,c] defined
24--
25-- modified: Quirin Weitzel, March 14 2011
26-- second merger with library file from dortmund (changes below)
27-- kw 01.03.: added array sd_block_default_ftu_active_list (type and defaults)
28-- kw 02.03.: added DD_BLOCK_SIZE_GENERAL (on-time counter + temperatures), changed DD_BLOCK_SIZE to 0x010 for testing
29-- kw 03.03.: added FTM_HEADER_LENGTH
30--
31-- modified: Quirin Weitzel, March 14 2011
32-- third merger with library file from dortmund (changes below)
33-- kw 22.03.: added FTU_ERROR_LENGTH
34-- kw 30.03.: added CMD_AUTOSEND, PAR_AUTOSEND_EA, PAR_AUTOSEND_DA
35--
36---kw 11.04.: added SD_ADDR_ftu_prescaling_0
37--
38-- modified: Quirin Weitzel, April 20 2011
39-- next merger with library file from dortmund (changes below)
40-- kw 14.04.: added sensor_array_type (temperature sensors)
41-- changed CMD_AUTOSEND to X"0040"
42-- added "start run / take X events", "stop run", "crate reset"
43-- kw 18.04.: removed PAR_READ_DD_ADDR, changed PAR_WRITE_SD_ADDR to 0x0004
44-- added FTM_PACKAGE_START and FTM_PACKAGE_END
45-- increased DD_BLOCK_SIZE and DD_BLOCK_SIZE_GENERAL by 1 (64 bit on-time counter)
46-- changed FTM_HEADER_LENGTH to 0x0E
47-- kw 20.04.: added "package types", SD_SINGLE_WORD_SIZE
48--
49-- kw 28.04.: changed SD_SINGLE_WORD_SIZE to X"002", added W5300_S0_KPALVTR (keep alive)
50--
51-- modified: Patrick Vogler, May 18 2011
52-- constants for light pulser and timing counter added
53--
54-- modified: Patrick Vogler, May 26 2011
55-- constants for a simpler Lightpulser Interface "Basic Version" added
56--
57-- qw 16.06.: network settings for La Palma added
58--
59-- qw 29.06.: changeover to firmware v2 -> FTU reconfiguration possible during run
60--
61-- kw 10.06.: added CMD_CONFIG_FTU
62--
63-- pv 21.07.: new lightpulser firmware to reduce LED current and light output
64-- changeover to firmware v3
65--
66-- pv 25.07.: new constants for lightpulser firmware
67-- new clock conditioner interface: data only sent during configuration,
68-- when changed
69-- changeover to firmware v4
70--
71-- qw 27.07.: two new status states introduced to indicate the lock state of the
72-- clock conditioner -> changeover to firmware v5
73----------------------------------------------------------------------------------
74
75
76library IEEE;
77use IEEE.STD_LOGIC_1164.all;
78use IEEE.STD_LOGIC_ARITH.ALL;
79use IEEE.STD_LOGIC_UNSIGNED.ALL;
80use IEEE.NUMERIC_STD.ALL;
81
82package ftm_array_types is
83
84 -- !!! some arrays are also defined in the ftm_constants package !!!
85
86 -- data arrays for a single FTU
87 type FTU_enable_array_type is array (0 to 3) of std_logic_vector(15 downto 0);
88 type FTU_dac_array_type is array (0 to 4) of std_logic_vector(15 downto 0);
89 type FTU_rate_array_type is array (0 to 4) of std_logic_vector(31 downto 0);
90 type active_FTU_array_type is array (0 to 3) of std_logic_vector(15 downto 0);
91 type FTU_answer_array_type is array (0 to 3) of integer range 0 to 10;
92
93 -- data array for clock conditioner interface
94 type clk_cond_array_type is array (0 to 14) of std_logic_vector (31 downto 0);
95
96 -- network array types
97 type ip_type is array (0 to 3) of integer;
98 type mac_type is array (0 to 2) of std_logic_vector (15 downto 0);
99
100 -- Temperature Sensor interface
101 type sensor_array_type is array (0 to 3) of integer range 0 to 2**16 - 1;
102
103end ftm_array_types;
104
105
106library IEEE;
107use IEEE.STD_LOGIC_1164.all;
108use IEEE.STD_LOGIC_ARITH.ALL;
109use IEEE.STD_LOGIC_UNSIGNED.ALL;
110-- for HDL-Designer
111-- LIBRARY FACT_FTM_lib;
112-- use FACT_FTM_lib.ftm_array_types.all;
113library ftm_definitions;
114use ftm_definitions.ftm_array_types.all;
115use IEEE.NUMERIC_STD.ALL;
116use ieee.math_real.all;
117
118package ftm_constants is
119
120 -- !!! many constants depend on each other or are defined 2x with different types !!!
121
122 constant NO_OF_CRATES : integer := 4;
123 constant NO_OF_FTUS_PER_CRATE : integer := 10;
124 constant NO_OF_FTU_ENABLE_REG : integer := 4;
125 constant NO_OF_FTU_DAC_REG : integer := 5;
126
127 --internal FPGA clock frequencies
128 constant INT_CLK_FREQUENCY_1 : integer := 50000000; -- 50MHz
129 constant INT_CLK_FREQUENCY_2 : integer := 250000000; -- 250MHz
130 constant LOW_FREQUENCY : integer := 1000000; -- has to be smaller than INT_CLK_FREQUENCY_1
131 --constant SCALER_FREQ_DIVIDER : integer := 10000; -- for simulation, should normally be 1
132 constant SCALER_FREQ_DIVIDER : integer := 1;
133
134 --FTM address and firmware ID
135 constant FTM_ADDRESS : std_logic_vector(7 downto 0) := "11000000"; -- 192
136 constant FIRMWARE_ID : std_logic_vector(7 downto 0) := "00000110"; -- firmware version
137
138 --communication with FTUs
139 constant FTU_RS485_BAUD_RATE : integer := 250000; -- bits / sec in our case
140 constant FTU_RS485_TIMEOUT : integer := (INT_CLK_FREQUENCY_1 * 2) / 1000; -- 2ms @ 50MHz (100000 clk periods)
141 --constant FTU_RS485_BAUD_RATE : integer := 10000000; -- for simulation
142 --constant FTU_RS485_TIMEOUT : integer := (INT_CLK_FREQUENCY_1 * 2) / 40000; -- for simulation
143 constant FTU_RS485_NO_OF_RETRY : integer range 0 to 2 := 2; -- in case of timeout, !!! HAS TO BE < 3 !!!
144 constant FTU_RS485_BLOCK_WIDTH : integer := 224; -- 28 byte protocol
145 constant FTU_RS485_START_DELIM : std_logic_vector(7 downto 0) := "01000000"; -- start delimiter "@"
146
147 --broadcast to FADs
148 constant FAD_RS485_BAUD_RATE : integer := 250000; -- bits / sec in our case
149 constant FAD_RS485_BLOCK_WIDTH : integer := 56; -- 7 byte trigger ID
150
151 --CRC setup
152 constant CRC_POLYNOMIAL : std_logic_vector(7 downto 0) := "00000111"; -- 8-CCITT
153 constant CRC_INIT_VALUE : std_logic_vector(7 downto 0) := "11111111";
154
155 --DNA identifier for simulation
156 constant DNA_FOR_SIM : bit_vector := X"01710000F0000501";
157
158 -- Clock conditioner (LMK03000, National semiconductor) interface
159 constant MICROWIRE_CLK_FREQUENCY : integer := 2000000; -- 2 MHz
160 -- value to be written to R0 of the LMK03000 to perform a reset, see LMK03000 datasheet
161 constant LMK03000_Reset : std_logic_vector (31 downto 0) := x"80000000";
162 constant LMK03000_REGISTER_WIDTH : integer := 32;
163 constant LMK03000_REGISTER_COUNT : integer := 15; -- number of registers to be programmed in the LMK03000 including reset
164 constant cc_R2_const : std_logic_vector := X"00000102"; -- unused
165 constant cc_R3_const : std_logic_vector := X"00000103"; -- channels
166 constant cc_R4_const : std_logic_vector := X"00000104";
167 constant cc_R5_const : std_logic_vector := X"00000105";
168 constant cc_R6_const : std_logic_vector := X"00000106";
169 constant cc_R7_const : std_logic_vector := X"00000107";
170
171 -- network settings Dortmund
172 -- constant MAC_ADDRESS : mac_type := (X"0011", X"9561", X"95A0");
173 -- constant NETMASK : ip_type := (255, 255, 255, 0);
174 -- constant IP_ADDRESS : ip_type := (129, 217, 160, 118);
175 -- constant GATEWAY : ip_type := (129, 217, 160, 1);
176 -- constant FIRST_PORT : integer := 5000;
177
178 -- network settings Zuerich, for backup/test FTM
179 -- constant MAC_ADDRESS : mac_type := (X"FAC7", X"0FAD", X"1101");
180 -- constant NETMASK : ip_type := (255, 255, 248, 0);
181 -- constant IP_ADDRESS : ip_type := (192, 33, 99, 246); --registered as ftmboard1.ethz.ch
182 -- constant GATEWAY : ip_type := (192, 33, 96, 1);
183 -- constant FIRST_PORT : integer := 5000;
184
185 -- network settings La Palma (internal subnet), for FTM in camera
186 constant MAC_ADDRESS : mac_type := (X"FAC7", X"1FAD", X"1102");
187 constant NETMASK : ip_type := (255, 255, 255, 0);
188 constant IP_ADDRESS : ip_type := (10, 0, 128, 120);
189 constant GATEWAY : ip_type := (10, 0, 128, 1);
190 constant FIRST_PORT : integer := 5000;
191
192 -- W5300 settings
193 constant W5300_S_INC : std_logic_vector(6 downto 0) := "1000000"; -- socket address offset
194 -- W5300 Registers
195 constant W5300_BASE_ADR : std_logic_vector (9 downto 0) := (others => '0');
196 constant W5300_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"0";
197 constant W5300_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2";
198 constant W5300_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"4";
199 constant W5300_SHAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"8";
200 constant W5300_GAR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"10";
201 constant W5300_SUBR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"14";
202 constant W5300_SIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"18";
203 constant W5300_RTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1C";
204 constant W5300_RCR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"1E";
205 constant W5300_TMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"20";
206 constant W5300_TMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"22";
207 constant W5300_TMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"24";
208 constant W5300_TMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"26";
209 constant W5300_RMS01R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"28";
210 constant W5300_RMS23R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2A";
211 constant W5300_RMS45R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2C";
212 constant W5300_RMS67R : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"2E";
213 constant W5300_MTYPER : std_logic_vector (9 downto 0) := W5300_BASE_ADR + X"30";
214 constant W5300_S0_MR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"0";
215 constant W5300_S0_CR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2";
216 constant W5300_S0_IMR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"4";
217 constant W5300_S0_IR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"6";
218 constant W5300_S0_SSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"8";
219 constant W5300_S0_PORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"A";
220 constant W5300_S0_DPORTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"12";
221 constant W5300_S0_DIPR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"14";
222 constant W5300_S0_KPALVTR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"1A";
223 constant W5300_S0_TX_WRSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"20";
224 constant W5300_S0_TX_FSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"24";
225 constant W5300_S0_RX_RSR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"28";
226 constant W5300_S0_TX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"2E";
227 constant W5300_S0_RX_FIFOR : std_logic_vector (9 downto 0) := W5300_BASE_ADR + "1000000000" + X"30";
228 -- End W5300 registers
229 constant W5300_TX_FIFO_SIZE_8B : integer := 65536; -- Socket TX FIFO-Size in Bytes
230 constant W5300_TX_FIFO_SIZE : integer := (W5300_TX_FIFO_SIZE_8B / 2); -- Socket TX FIFO-Size in 16 Bit Words
231 constant W5300_LAST_SOCKET : integer := 0;
232
233 -- Commands
234 constant CMD_START_DELIMITER : std_logic_vector := X"0040"; -- "@"
235 constant CMD_TLED : std_logic_vector := X"C000"; -- only a test
236 constant CMD_READ : std_logic_vector := X"0001";
237 constant PAR_READ_SD : std_logic_vector := X"0001"; -- read static data block
238 constant PAR_READ_DD : std_logic_vector := X"0002"; -- read dynamic data block
239 -- only for debugging: data_block (0) = ADDR
240 constant PAR_READ_SD_ADDR : std_logic_vector := X"0004"; -- read from address in static data block
241 constant CMD_WRITE : std_logic_vector := X"0002";
242 constant PAR_WRITE_SD : std_logic_vector := X"0001"; -- write static data block
243 -- only for debugging: data_block (0) = ADDR, data_block (1) = DATA
244 constant PAR_WRITE_SD_ADDR : std_logic_vector := X"0004"; -- write to address in static data ram
245 -- ping all FTUs
246 constant CMD_PING : std_logic_vector := X"0010"; -- ping all FTUs
247 -- turn automatic sending of dd-block and ftu-error-list on or off
248 constant CMD_AUTOSEND : std_logic_vector := X"0040";
249 constant PAR_AUTOSEND_EA : std_logic_vector := X"0001"; -- enable automatic sending
250 constant PAR_AUTOSEND_DA : std_logic_vector := X"0000"; -- disable automatic sending
251
252 -- start run / take X events
253 constant CMD_START : std_logic_vector := X"0004";
254 constant PAR_START_RUN : std_logic_vector := X"0001";
255 constant PAR_START_X_EVNTS : std_logic_vector := X"0002";
256
257 -- stop run
258 constant CMD_STOP : std_logic_vector := X"0008";
259
260 -- crate reset
261 constant CMD_CRESET : std_logic_vector := X"0020";
262 constant RESET_TIME : integer := 50; -- hold reset line for 1us (@ 50MHz clk)
263
264 -- configure one ftu
265 constant CMD_CONFIG_FTU : std_logic_vector := X"0080";
266
267 -- start and end of package
268 constant FTM_PACKAGE_START : std_logic_vector := X"FB01";
269 constant FTM_PACKAGE_END : std_logic_vector := X"04FE";
270
271 -- package types
272 constant FTM_PACKAGE_TYPE_SD : std_logic_vector := X"0001";
273 constant FTM_PACKAGE_TYPE_DD : std_logic_vector := X"0002";
274 constant FTM_PACKAGE_TYPE_FTU_LIST : std_logic_vector := X"0003";
275 constant FTM_PACKAGE_TYPE_FTU_ERR : std_logic_vector := X"0004";
276 constant FTM_PACKAGE_TYPE_SD_WORD : std_logic_vector := X"0005";
277
278 -- state types
279 constant FTM_STATE_IDLE : std_logic_vector := X"0101";
280 constant FTM_STATE_CFG : std_logic_vector := X"0002";
281 constant FTM_STATE_RUN : std_logic_vector := X"0103";
282 --constant FTM_STATE_CALIB : std_logic_vector := X"0004";
283 constant FTM_STATE_IDLE_NOT_LOCKED : std_logic_vector := X"0001";
284 constant FTM_STATE_RUN_NOT_LOCKED : std_logic_vector := X"0003";
285
286 -- header length of data packages
287 constant FTM_HEADER_LENGTH : std_logic_vector (7 DOWNTO 0) := X"0E";
288
289 -- FTU error message
290 constant FTU_ERROR_LENGTH : std_logic_vector (11 downto 0) := X"01D"; --(number of unsuccessful calls) + (28 * data) = 29
291
292 -- FTU-list parameters
293 constant FL_BLOCK_SIZE : std_logic_vector := X"0F9"; -- FTU-list size -- 9 + (40 * 6) = 249
294 constant NO_OF_FTU_LIST_REG : integer := 6;
295 constant FTU_LIST_RAM_OFFSET : integer := 16#009#;
296 constant FTU_LIST_RAM_ADDR_WIDTH : integer := 12;
297
298 constant NO_OF_DD_RAM_REG : integer := 12;
299
300 -- Static data block
301 constant SD_BLOCK_SIZE_GENERAL : integer := 32; -- X"20" -- static data block size without FTU data
302 constant SD_FTU_BASE_ADDR : std_logic_vector := X"020"; -- beginning of FTU data
303 constant STATIC_RAM_CFG_FTU_OFFSET : integer := 16#020#;
304 constant STATIC_RAM_ADDR_WIDTH : integer := 12;
305 constant SD_FTU_DATA_SIZE : integer := 10; -- X"00A" -- size of one FTU data block
306 constant SD_FTU_NUM : integer := 40; -- number of FTUs
307 constant SD_FTU_ACTIVE_BASE_ADDR : std_logic_vector := X"1B0"; -- beginning of active FTU lists
308 constant SD_FTU_ACTIVE_NUM : integer := 4; -- number of active FTU lists (cr0 to cr3)
309 constant SD_BLOCK_SIZE : std_logic_vector (11 downto 0) := X"1B4"; -- total size of static data block
310 constant SD_SINGLE_WORD_SIZE : std_logic_vector := X"002";
311
312 -- dynamic data block
313 constant DD_BLOCK_SIZE : std_logic_vector (11 downto 0) := X"1E8"; -- 8 + (40 * 12) = 0x1E8 --total size of dynamic data block
314 constant DD_BLOCK_SIZE_GENERAL : integer := 8; -- dynamic block size without FTU data
315 constant DYNAMIC_RAM_ADDR_WIDTH : integer := 12;
316
317 -- addresses in static data block
318 constant SD_ADDR_general_settings : std_logic_vector := X"000";
319 constant SD_ADDR_led : std_logic_vector := X"001";
320 constant SD_ADDR_lp_pt_freq : std_logic_vector := X"002";
321 constant SD_ADDR_lp_pt_ratio : std_logic_vector := X"003";
322 constant SD_ADDR_lp1_amplitude : std_logic_vector := X"004";
323 constant SD_ADDR_lp2_amplitude : std_logic_vector := X"005";
324 constant SD_ADDR_lp1_delay : std_logic_vector := X"006";
325 constant SD_ADDR_lp2_delay : std_logic_vector := X"007";
326 constant SD_ADDR_coin_n_p : std_logic_vector := X"008";
327 constant SD_ADDR_coin_n_c : std_logic_vector := X"009";
328 constant SD_ADDR_trigger_delay : std_logic_vector := X"00A";
329 constant SD_ADDR_timemarker_delay : std_logic_vector := X"00B";
330 constant SD_ADDR_dead_time : std_logic_vector := X"00C";
331 constant SD_ADDR_cc_R0_HI : std_logic_vector := X"00D";
332 constant SD_ADDR_cc_R0_LO : std_logic_vector := X"00E";
333 constant SD_ADDR_cc_R1_HI : std_logic_vector := X"00F";
334 constant SD_ADDR_cc_R1_LO : std_logic_vector := X"010";
335 constant SD_ADDR_cc_R8_HI : std_logic_vector := X"011";
336 constant SD_ADDR_cc_R8_LO : std_logic_vector := X"012";
337 constant SD_ADDR_cc_R9_HI : std_logic_vector := X"013";
338 constant SD_ADDR_cc_R9_LO : std_logic_vector := X"014";
339 constant SD_ADDR_cc_R11_HI : std_logic_vector := X"015";
340 constant SD_ADDR_cc_R11_LO : std_logic_vector := X"016";
341 constant SD_ADDR_cc_R13_HI : std_logic_vector := X"017";
342 constant SD_ADDR_cc_R13_LO : std_logic_vector := X"018";
343 constant SD_ADDR_cc_R14_HI : std_logic_vector := X"019";
344 constant SD_ADDR_cc_R14_LO : std_logic_vector := X"01A";
345 constant SD_ADDR_cc_R15_HI : std_logic_vector := X"01B";
346 constant SD_ADDR_cc_R15_LO : std_logic_vector := X"01C";
347 constant SD_ADDR_coin_win_p : std_logic_vector := X"01D";
348 constant SD_ADDR_coin_win_c : std_logic_vector := X"01E";
349 constant SD_ADDR_ftu_prescaling_0 : std_logic_vector := X"029";
350 constant SD_ADDR_ftu_active_cr0 : std_logic_vector := X"1B0";
351 constant SD_ADDR_ftu_active_cr1 : std_logic_vector := X"1B1";
352 constant SD_ADDR_ftu_active_cr2 : std_logic_vector := X"1B2";
353 constant SD_ADDR_ftu_active_cr3 : std_logic_vector := X"1B3";
354 constant STATIC_RAM_ACT_FTU_OFFSET : integer := 16#1B0#;
355
356
357 -- arrays for default values
358 type sd_block_default_array_type is array (0 to (SD_BLOCK_SIZE_GENERAL - 1)) of std_logic_vector (15 downto 0);
359 type sd_block_ftu_default_array_type is array (0 to (SD_FTU_DATA_SIZE - 1)) of std_logic_vector (15 downto 0);
360 type sd_block_default_ftu_active_list_type is array (0 to (SD_FTU_ACTIVE_NUM - 1)) of std_logic_vector (15 downto 0);
361
362 -- general default values
363 -- !!! to be defined !!!
364 constant sd_block_default_array : sd_block_default_array_type := (
365 X"0080", -- SD_ADDR_general_settings -- general settings
366 --X"0010", -- SD_ADDR_general_settings -- general settings
367 X"0000", -- SD_ADDR_led -- on-board status LEDs
368 X"03E8", -- SD_ADDR_lp_pt_freq -- light pulser and pedestal trigger frequency
369 --X"0001", -- SD_ADDR_lp_pt_freq -- light pulser and pedestal trigger frequency
370 X"0000", -- SD_ADDR_lp_pt_ratio... -- ratio between LP1, LP2 and pedestal triggers
371 --X"0001", -- SD_ADDR_lp_pt_ratio... -- ratio between LP1, LP2 and pedestal triggers
372 X"8020", -- SD_ADDR_lp1_amplitude -- light pulser 1 amplitude
373 X"4001", -- SD_ADDR_lp2_amplitude -- light pulser 2 amplitude
374 X"0000", -- SD_ADDR_lp1_delay -- light pulser 1 delay
375 X"0000", -- SD_ADDR_lp2_delay -- light pulser 2 delay
376 X"0001", -- SD_ADDR_coin_n_p -- majority coincidence n (for physics)
377 X"0014", -- SD_ADDR_coin_n_c -- majority coincidence n (for calibration)
378 X"0000", -- SD_ADDR_trigger_delay -- trigger delay
379 X"0000", -- SD_ADDR_timemarker_delay -- timemarker delay
380 X"00F8", -- SD_ADDR_dead_time -- dead time, 8ns + 4x248ns = 1000ns
381 X"0003", -- SD_ADDR_cc_R0_HI -- clock conditioner R0 bits 31...16
382 X"8000", -- SD_ADDR_cc_R0_LO -- clock conditioner R0 bits 15...0
383 X"0001", -- SD_ADDR_cc_R1_HI -- clock conditioner R1 bits 31...16
384 X"0101", -- SD_ADDR_cc_R1_LO -- clock conditioner R1 bits 15...0
385 X"1000", -- SD_ADDR_cc_R8_HI -- clock conditioner R8 bits 31...16
386 X"0908", -- SD_ADDR_cc_R8_LO -- clock conditioner R8 bits 15...0
387 X"A003", -- SD_ADDR_cc_R9_HI -- clock conditioner R9 bits 31...16
388 X"2A09", -- SD_ADDR_cc_R9_LO -- clock conditioner R9 bits 15...0
389 X"0082", -- SD_ADDR_cc_R11_HI -- clock conditioner R11 bits 31...16
390 X"000B", -- SD_ADDR_cc_R11_LO -- clock conditioner R11 bits 15...0
391 X"020A", -- SD_ADDR_cc_R13_HI -- clock conditioner R13 bits 31...16
392 X"000D", -- SD_ADDR_cc_R13_LO -- clock conditioner R13 bits 15...0
393 X"0830", -- SD_ADDR_cc_R14_HI -- clock conditioner R14 bits 31...16
394 X"280E", -- SD_ADDR_cc_R14_LO -- clock conditioner R14 bits 15...0
395 X"1400", -- SD_ADDR_cc_R15_HI -- clock conditioner R15 bits 31...16
396 X"FA0F", -- SD_ADDR_cc_R15_LO -- clock conditioner R15 bits 15...0
397 X"0001", -- SD_ADDR_coin_win_p -- majority coincidence window (for physics), 8ns + 4x1ns = 12ns
398 X"0001", -- SD_ADDR_coin_win_c -- majority coincidence window (for calibration), 8ns + 4x1ns = 12ns
399 X"001F" -- -- Spare
400 );
401
402 -- default values for all FTUs
403 constant sd_block_ftu_default_array : sd_block_ftu_default_array_type := (
404 X"01FF", -- enables patch 0 board x crate y
405 X"01FF", -- enables patch 1 board x crate y
406 X"01FF", -- enables patch 2 board x crate y
407 X"01FF", -- enables patch 3 board x crate y
408 X"01F4", -- DAC_A board x crate y
409 X"01F4", -- DAC_B board x crate y
410 X"01F4", -- DAC_C board x crate y
411 X"01F4", -- DAC_D board x crate y
412 X"0010", -- DAC_H board x crate y
413 X"0001" -- Prescaling board x crate y
414 );
415
416 --default values for active FTU lists
417 constant sd_block_default_ftu_active_list : sd_block_default_ftu_active_list_type := (
418 X"0000",
419 X"0000",
420 X"0000",
421 X"0000"
422 );
423
424 --======================================================================================
425 -- Constants for Light pulser interface width (8ns+value*4ns)
426 --======================================================================================
427 -- constant low_PLC : integer := 16; -- minimal pulse duration in units of 4 ns
428 -- constant width_PLC : integer := 6; -- counter width pulse duration
429 -- constant FLD_PULSE_LENGTH : integer := 12;
430 -- constant FLD_MIN_FREQ_DIV : integer := 25;
431 -- constant FLD_FD_MULT : integer := 50;
432 -- constant FLD_FD_MAX_RANGE : integer := 64;
433
434 -- --------------------------------------------------------------------------------------
435 -- Lightpulser Basic Version
436 -- --------------------------------------------------------------------------------------
437 constant FLD_PULSE_LENGTH_Pulse : integer := 2; -- 40ns pulse @ 50MHz, instead of 3: 60ns pulse @ 50MHz
438 constant FLD_PULSE_LENGTH_FM : integer := 3; -- 60ns pulse @ 50MHz
439 constant FLD_MIN_FREQ_DIV_BASIC : integer := 25; -- before 25 (8 inbetween)
440 constant FLD_FD_MULT_BASIC : integer := 10; -- before 10 (8 inbetween)
441 constant FLD_FD_MAX_RANGE_BASIC : integer := 127;-- before 64 (128 inbetween)
442
443 -- Timing counter
444 constant TC_WIDTH : integer := 48;
445 constant PRECOUNT_WIDTH : integer := 8;
446 constant PRECOUNT_DIVIDER : integer := 50;
447
448 --======================================================================================
449 -- Constants for calibration and pedestal triggers generation
450 --======================================================================================
451 constant LOW_SPEED_CLOCK_FREQ : real := 50000000.0;
452 constant LOW_SPEED_CLOCK_PERIOD : real := 1.0/LOW_SPEED_CLOCK_FREQ;
453 constant MS_PERIOD : real := 0.001;
454 constant MAX_MS_COUNTER_WIDTH : integer := integer(ceil(log2(real(MS_PERIOD/LOW_SPEED_CLOCK_PERIOD))));
455 constant MAX_MS_COUNTER_VAL : integer := integer(MS_PERIOD/LOW_SPEED_CLOCK_PERIOD);
456 --======================================================================================
457
458 --======================================================================================
459 -- Constants for trigger and TIM signals width (8ns+value*4ns)
460 --======================================================================================
461 constant TRIG_SIGNAL_PULSE_WIDTH : integer range 0 to 15 := 10;
462 constant TIM_SIGNAL_PULSE_WIDTH : integer range 0 to 15 := 0;
463 --======================================================================================
464
465end ftm_constants;
Note: See TracBrowser for help on using the repository browser.