source: firmware/FTM/trigger/drivers/detection_logic/unary_to_binary.vhd@ 13417

--=======================================================================================
-- TITLE        : Binary to decimal converter
-- DESCRIPTION  :       Convert 5bits to the sum on 3bits of the bits to '1' in input vector
-- FILE         : binary_to_decimal.vhd
-- COMPANY      : Micro-Cameras & Space Exploration SA
--=======================================================================================
-- CREATION
-- DATE                         AUTHOR  PROJECT                 REVISION
-- 07/03/2011 JGi                110307a
--=======================================================================================
-- MODIFICATION HISTORY
-- DATE                         AUTHOR  PROJECT                 REVISION        COMMENTS
-- 07/03/2011 JGi                           110307a     Description
--=======================================================================================
-- Library Definition
library ieee;
  use ieee.std_logic_1164.all;
  use ieee.numeric_std.all;

-- Entity Definition
entity unary_to_binary is
  port( --clock
        clk_250MHz      : in  std_logic;
        --input
        vector_in               : in    std_logic_vector(4 downto 0);
        --output
        result                  : out   std_logic_vector(2 downto 0));
end unary_to_binary;

-- Architecture Definition
architecture RTL of unary_to_binary is

  type t_reg is record
    -- Internal register declaration
    -- Ouput register declaration
    result                      : std_logic_vector(2 downto 0);
  end record;

  signal i_next_reg : t_reg     := (result                      => (others => '0'));
  signal i_reg      : t_reg     := (result                      => (others => '0'));

begin

  -- Combinatorial logic
  process(vector_in, i_reg)
    variable v_reg  : t_reg     := (result      => (others => '0'));
        variable temp_vect_0, temp_vect_1, temp_vect_2, temp_vect_3, temp_vect_4        :       
                                                unsigned(2 downto 0)    := (others => '0');
  begin
    v_reg := i_reg;
    --===================================================================================

    --===================================================================================
    -- Bit count processing
    --===================================================================================
    -- Simulate 5 vectors of 3 bits for the sum
    temp_vect_0 := "00" & vector_in(0);
    temp_vect_1 := "00" & vector_in(1);
    temp_vect_2 := "00" & vector_in(2);
    temp_vect_3 := "00" & vector_in(3);
    temp_vect_4 := "00" & vector_in(4);

                -- Sum all the simulated vectors
    v_reg.result        := std_logic_vector(temp_vect_0 + temp_vect_1 + temp_vect_2     +
                                                                                                                                                        temp_vect_3 + temp_vect_4);
    --===================================================================================

    --===================================================================================
    -- Drive register input
    i_next_reg <= v_reg;

    --===================================================================================
    -- Output assignation
                result  <= i_reg.result;
    --===================================================================================
  end process;

  -- Sequential logic
  process(clk_250MHz)
  begin
    if rising_edge(clk_250MHz) then
      i_reg <= i_next_reg;
    end if;
  end process;

end RTL;