source: firmware/FTU/old_design/spi_interface/spi_xmit_shift_reg_16.vhd@ 18678

---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
--  File:          spi_xmit_shift_reg_16.vhd
--
--
--  Original file: spi_xmit_shift_reg.vhd
--
--  Created:  9-6-00 ALS
--  SPI shift register that shifts data out on MOSI. No data is shifted in.
--  This is an 8-bit, loadable register. The data output from the shift register is
--  clocked one additional system clock to align the data with the outgoing clock on
--  SCK.
--
--  Revised: 9-11-00 ALS
--  Revised: 9-20-00 ALS

---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
--  Modified from 8 to 16 bit word size by Patrick Vogler
--  18th November 2009
--
--       Modifications are marked by: *Mod: <modification>
--
--  Cleaned up by Quirin Weitzel
--  21th January 2010
---------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;

entity spi_xmit_shift_reg is
  port(
    data_ld      : in STD_LOGIC;                      -- Data load enable
    data_in      : in STD_LOGIC_VECTOR (15 downto 0); -- Data to load in, *Mod: 15 instead of 7, parallel input extended from 8 to 16 bit
    shift_in     : in STD_LOGIC;                      -- Serial data in
    shift_en     : in STD_LOGIC;                      -- Shift enable         
    mosi         : out STD_LOGIC;                     -- Shift serial data out
    ss_in_int    : in STD_LOGIC;                      -- another master is on bus
    reset        : in STD_LOGIC;                      -- reset
    sclk         : in STD_LOGIC;                      -- clock
    sys_clk      : in STD_LOGIC                       -- system clock
  );
        
end spi_xmit_shift_reg;

architecture DEFINITION of spi_xmit_shift_reg is

--******************************** Constants ***********************
constant RESET_ACTIVE : std_logic := '0';

--******************************** Signals *************************
signal data_int     : STD_LOGIC_VECTOR (15 downto 0);-- *Mod: 15 instead of 7, parallel output extended from 8 to 16 bit
signal mosi_int     : STD_LOGIC;

begin

  --******************************** SPI Xmit Shift Register ***********************
  -- This shift register is clocked on SCK_1
  xmit_shift_reg:  process(sclk, reset, ss_in_int)
  begin    
    -- Clear output register
    if (reset = RESET_ACTIVE or ss_in_int = '0') then
      data_int <= (others => '0');
           
      -- On rising edge of spi clock, shift data
    elsif sclk'event and sclk = '1' then

      -- Load data
      if (data_ld = '1') then
        data_int <= data_in;

        -- If shift enable is high
      elsif shift_en = '1' then

        -- Shift the data
        data_int <= data_int(14 downto 0) & shift_in; --*Mod: 14 instead of 6, shift register extended from 8 to 16 bit
      end if;
      
    end if;

  end process;

  --******************************** MOSI Output Register ***********************
  -- This output register is clocked on the system clock and aligns the data from the
  -- shift register with the outgoing SCK
  outreg: process (sys_clk, reset)
  begin
    if reset = RESET_ACTIVE then
      mosi_int <= '0';
    elsif sys_clk'event and sys_clk = '1' then
      
      mosi_int <= data_int(15); -- *Mod: 15 instead of 7, shift register extended form 8 to 16 bit
    end if;
  end process;

  -- The MOSI output is 3-stated if the SS_IN_INT signal is asserted indicating that another
  -- master is on the bus
  mosi <= mosi_int when ss_in_int = '1' 
          else    'Z';

end DEFINITION;