# Main configuration file for the HV control program V1.0, 2009 06 17, 15:50:39
# Note: this file will be updated at program exit

LogPath            ../hvcontrol/log/

PixMapTable        ../config/PixelMap.txt

TimeOut            0.10 s   # Timeout to return from read (0.01,...5.00) s

StatusRefreshRate  50.00 Hz   # Status update rate (0.01,...50.00) Hz

CCPort             3000   # Port used to look for commands from the Central Control
CCClient           ihp-eth63   # Central Control client name

IsDAC              FALSE   # Define here if user input is interpreted as DAC value or voltage

DACMin             11008   # Starting point for calibration of DAC to voltage values
DACMax             12496   # End point for calibration of DAC to voltage values
HVMin              67.000000   # Starting point for calibration of voltage to DAC values
HVMax              76.000000   # End point for calibration of voltage to DAC values
HVCalibOffset      67.000000   # Calibration of DAC to voltage values
HVCalibSlope       0.006400   # Calibration of DAC to voltage values

HVMaxDiff          500.000000   # Speed for HV changes limited to 1V/ms
# List of HV boards (at most 20 HV boards will be recognized):
Board0             FTCVIP44
Board1             FTE11AW4
Board2             DUMMY
Board3             DUMMY
Board4             FTE11ANQ
Board5             DUMMY
Board6             FTCVINZA
Board7             DUMMY
Board8             DUMMY
Board9             FTE11ATK