|
Last change
on this file since 87 was 80, checked in by lstark, 15 years ago |
|
feedback through socket and test mode implemented
|
|
File size:
1.5 KB
|
| Line | |
|---|
| 1 | # Main configuration file for the HV control program V1.0, 2009 06 26, 07:56:06
|
|---|
| 2 | # Note: this file will be updated at program exit
|
|---|
| 3 |
|
|---|
| 4 | LogPath ../hvcontrol/log/
|
|---|
| 5 |
|
|---|
| 6 | PixMapTable ../config/PixelMap.txt
|
|---|
| 7 |
|
|---|
| 8 | TestMode TRUE #Test Mode: if no HV boards are connected, the test mode can be used.TimeOut 1.00 s # Timeout to return from read (0.01,...5.00) s
|
|---|
| 9 |
|
|---|
| 10 | StatusRefreshRate 50.00 Hz # Status update rate (0.01,...50.00) Hz
|
|---|
| 11 |
|
|---|
| 12 | CCPort 3000 # Port used to look for commands from the Central Control
|
|---|
| 13 | CCClient ihp-eth63 # Central Control client name
|
|---|
| 14 |
|
|---|
| 15 | IsDAC FALSE # Define here if user input is interpreted as DAC value or voltage
|
|---|
| 16 |
|
|---|
| 17 | DACMin 11008 # Starting point for calibration of DAC to voltage values
|
|---|
| 18 | DACMax 12496 # End point for calibration of DAC to voltage values
|
|---|
| 19 | HVMin 67.000000 # Starting point for calibration of voltage to DAC values
|
|---|
| 20 | HVMax 76.000000 # End point for calibration of voltage to DAC values
|
|---|
| 21 | HVCalibOffset 67.000000 # Calibration of DAC to voltage values
|
|---|
| 22 | HVCalibSlope 0.006400 # Calibration of DAC to voltage values
|
|---|
| 23 |
|
|---|
| 24 | HVMaxDiff 500.000000 # Speed for HV changes limited to 1V/ms
|
|---|
| 25 | # List of HV boards (at most 20 HV boards will be recognized):
|
|---|
| 26 | Board0 FTCVIP44
|
|---|
| 27 | Board1 FTE11AW4
|
|---|
| 28 | Board2 DUMMY
|
|---|
| 29 | Board3 DUMMY
|
|---|
| 30 | Board4 FTE11ANQ
|
|---|
| 31 | Board5 DUMMY
|
|---|
| 32 | Board6 FTCVINZA
|
|---|
| 33 | Board7 DUMMY
|
|---|
| 34 | Board8 DUMMY
|
|---|
| 35 | Board9 FTE11ATK
|
|---|
Note:
See
TracBrowser
for help on using the repository browser.
