source: tags/Mars-V0.10/mpedestal/MPedCalcPedRun.cc

/* ======================================================================== *\
!
! *
! * This file is part of MARS, the MAGIC Analysis and Reconstruction
! * Software. It is distributed to you in the hope that it can be a useful
! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
! * It is distributed WITHOUT ANY WARRANTY.
! *
! * Permission to use, copy, modify and distribute this software and its
! * documentation for any purpose is hereby granted without fee,
! * provided that the above copyright notice appear in all copies and
! * that both that copyright notice and this permission notice appear
! * in supporting documentation. It is provided "as is" without express
! * or implied warranty.
! *
!
!
!   Author(s): Josep Flix 04/2001 <mailto:jflix@ifae.es>
!   Author(s): Thomas Bretz 05/2001 <mailto:tbretz@astro.uni-wuerzburg.de>
!   Author(s): Sebastian Commichau 12/2003 
!   Author(s): Javier Rico 01/2004 <mailto:jrico@ifae.es>
!   Author(s): Markus Gaug 01/2004 <mailto:markus@ifae.es>
!
!   Copyright: MAGIC Software Development, 2000-2004
!
!
\* ======================================================================== */
/////////////////////////////////////////////////////////////////////////////
//
//   MPedCalcPedRun
//
//  This task takes a pedestal run file and fills MPedestalCam during
//  the Process() with the pedestal and rms computed in an event basis.
//  In the PostProcess() MPedestalCam is finally filled with the pedestal
//  mean and rms computed in a run basis.
//  More than one run (file) can be merged
//
//  MPedCalcPedRun applies the following formula (1):
// 
//  Pedestal per slice = sum(x_i) / n / slices
//  PedRMS per slice   = Sqrt(  ( sum(x_i^2) - sum(x_i)^2/n ) / n-1 / slices )
// 
//  where x_i is the sum of "slices" FADC slices and sum means the sum over all
//  events. "n" is the number of events, "slices" is the number of summed FADC samples.
// 
//  Note that the slice-to-slice fluctuations are not Gaussian, but Poissonian, thus 
//  asymmetric and they are correlated.
// 
//  It is important to know that the Pedestal per slice and PedRMS per slice depend 
//  on the number of used FADC slices, as seen in the following plots:
//
//Begin_Html
/*
<img src="images/PedestalStudyInner.gif">
*/
//End_Html
//
//Begin_Html
/*
<img src="images/PedestalStudyOuter.gif">
*/
//
// The plots show the inner and outer pixels, respectivly and have the following meaning:
// 
// 1) The calculated mean pedestal per slice (from MPedCalcPedRun)
// 2) The fitted mean pedestal per slice     (from MHPedestalCam)
// 3) The calculated pedestal RMS per slice  (from MPedCalcPedRun)
// 4) The fitted sigma of the pedestal distribution per slice
//                                           (from MHPedestalCam)
// 5) The relative difference between calculation and histogram fit
//    for the mean
// 6) The relative difference between calculation and histogram fit
//    for the sigma or RMS, respectively.
// 
// The calculated means do not change significantly except for the case of 2 slices, 
// however the RMS changes from 5.7 per slice in the case of 2 extracted slices 
// to 8.3 per slice in the case of 26 extracted slices. This change is very significant.
// 
// The plots have been produced on run 20123. You can reproduce them using
// the macro pedestalstudies.C
// 
//  Usage of this class: 
//  ====================
// 
//  Call: SetRange(higainfirst, higainlast, logainfirst, logainlast) 
//  to modify the ranges in which the window is allowed to move. 
//  Defaults are: 
// 
//   fHiGainFirst =  fgHiGainFirst =  0 
//   fHiGainLast  =  fgHiGainLast  =  29
//   fLoGainFirst =  fgLoGainFirst =  0 
//   fLoGainLast  =  fgLoGainLast  =  14
//
//  Call: SetWindowSize(windowhigain, windowlogain) 
//  to modify the sliding window widths. Windows have to be an even number. 
//  In case of odd numbers, the window will be modified.
//
//  Defaults are:
//
//   fHiGainWindowSize = fgHiGainWindowSize = 14
//   fLoGainWindowSize = fgLoGainWindowSize = 0
//
//
// ToDo:
//   - Take a setup file (ReadEnv-implementation) as input
//
//
//  Input Containers:
//   MRawEvtData
//   MRawRunHeader
//   MRawEvtHeader
//   MGeomCam
//
//  Output Containers:
//   MPedestalCam
//
//  See also: MPedestalCam, MPedestalPix, MHPedestalCam, MExtractor
//
/////////////////////////////////////////////////////////////////////////////
#include "MPedCalcPedRun.h"

#include "MParList.h"

#include "MLog.h"
#include "MLogManip.h"

#include "MRawRunHeader.h"  
#include "MRawEvtHeader.h"  
#include "MRawEvtPixelIter.h"
#include "MRawEvtData.h"

#include "MPedestalPix.h"
#include "MPedestalCam.h"

#include "MGeomPix.h"
#include "MGeomCam.h"

#include "MExtractPedestal.h"
#include "MExtractTimeAndCharge.h"

#include "MTriggerPattern.h"

ClassImp(MPedCalcPedRun);

using namespace std;

const UShort_t MPedCalcPedRun::fgExtractWinFirst       = 0;
const UShort_t MPedCalcPedRun::fgExtractWinSize        = 6;
const UInt_t   MPedCalcPedRun::gkFirstRunWithFinalBits = 45605;
// --------------------------------------------------------------------------
//
// Default constructor: 
//
// Sets:
// - all pointers to NULL
// - fWindowSizeHiGain to fgHiGainWindowSize
// - fWindowSizeLoGain to fgLoGainWindowSize
//
// Calls: 
// - AddToBranchList("fHiGainPixId");
// - AddToBranchList("fHiGainFadcSamples");
// - SetRange(fgHiGainFirst, fgHiGainLast, fgLoGainFirst, fgLoGainLast)
//
MPedCalcPedRun::MPedCalcPedRun(const char *name, const char *title)
    : fOverlap(0), fIsFirstPedRun(kFALSE), fUsedEvents(0), fTrigPattern(NULL)
{
  fName  = name  ? name  : "MPedCalcPedRun";
  fTitle = title ? title : "Task to calculate pedestals from pedestal runs raw data";
  
  SetExtractWindow(fgExtractWinFirst, fgExtractWinSize);
  
  //  SetNumEventsDump(1001);
  //  SetNumAreasDump(1001);
  //  SetNumSectorsDump(1001);
}

// --------------------------------------------------------------------------
//
// In case that the variables fExtractLast is greater than the number of 
// High-Gain FADC samples obtained from the run header, the flag 
// fOverlap is set to the difference and fExtractLast is set back by the
// same number of slices.
//
void MPedCalcPedRun::CheckExtractionWindow()
{
  const UShort_t lastavailable = fRunHeader->GetNumSamplesHiGain()-1;
  
  if (fExtractWinLast <= lastavailable)
    return;
  
  const UShort_t diff = fExtractWinLast - lastavailable;
  
  *fLog << warn << endl;
  *fLog << "Selected ExtractWindow [" << fExtractWinFirst << "," << fExtractWinLast;
  *fLog << "] ranges out of range [0," << lastavailable << "]." << endl;
  *fLog << "Using " << diff << " samples from the 'Lo-Gain' slices for the pedestal extraction" << endl;
  
  fExtractWinLast -= diff;
  fOverlap         = diff;
}

void MPedCalcPedRun::Reset()
{

  MExtractPedestal::ResetArrays();
  fUsedEvents    = 0;
}

// --------------------------------------------------------------------------
//
// Set fIsFirstPedRun=kTRUE
//
Int_t MPedCalcPedRun::PreProcess(MParList *pList)
{

  fUsedEvents    = 0;
  fIsFirstPedRun = kTRUE;
  fIsNotPedRun   = kFALSE;
  
  fTrigPattern = (MTriggerPattern*)pList->FindObject("MTriggerPattern");
  if (!fTrigPattern)
    *fLog << inf << "MTriggerPattern not found... Cannot use interlaced pedestal events." << endl;

  return MExtractPedestal::PreProcess(pList);
}

// --------------------------------------------------------------------------
//
// The run type is checked for "kRTPedestal"
// and the variable fIsNotPedRun is set in that case
//
Bool_t MPedCalcPedRun::ReInit(MParList *pList)
{

  if (!MExtractPedestal::ReInit(pList))
    return kFALSE;

  CheckExtractionWindow();

  //
  // If this is the first ped run, the next run (call to ReInit)
  // is not the first anymore
  //
  switch (fRunHeader->GetRunType())
  {
  case MRawRunHeader::kRTPedestal:
  case MRawRunHeader::kRTMonteCarlo:
      fIsFirstPedRun = kFALSE;
      fIsNotPedRun   = kFALSE;
      return kTRUE;
  
  case MRawRunHeader::kRTCalibration:
      {
          TString proj(fRunHeader->GetProjectName());
          proj.ToLower();

          // test if a continuous light run has been declared as calibration...
          if (proj.Contains("cl"))
          {
              fIsFirstPedRun = kFALSE;
              fIsNotPedRun   = kFALSE;
              return kTRUE;
          }
      }
  }

  fIsNotPedRun = kTRUE;

  //
  // If this is the first call to ReInit (before reading the first file)
  // nothing should be done. It occurs for the case that the first treated 
  // file is not of pedestal type.
  //
  if (fIsFirstPedRun)
    return kTRUE;
  
  //
  // In the other case, produce the MPedestalCam to be use the subsequent
  // (non-pedestal) events
  //
  *fLog << inf << "Finalizing pedestal calculations..." << flush;
  
  if (!Finalize())
    return kFALSE;
  
  Reset();

  return kTRUE;
}

// --------------------------------------------------------------------------
//
// Return kTRUE (without doing anything) in case that the run type is not 
// equal to 1 (pedestal run)
//
// Fill the MPedestalCam container with the signal mean and rms for the event.
// Store the measured signal in arrays fSumx and fSumx2 so that we can 
// calculate the overall mean and rms in the PostProcess()
//
Int_t MPedCalcPedRun::Calc()
{
  if (fIsNotPedRun && !IsPedBitSet())
    return kTRUE;
  
  //  if (fUsedEvents == fNumEventsDump)
  //    {
  //      *fLog << endl;
  //      *fLog << inf << GetDescriptor() << " : Finalize pedestal calculations..." << flush;
  //      Finalize();
  //      Reset();
  //    }
  
  fUsedEvents++;

  MRawEvtPixelIter pixel(fRawEvt);
  
  while (pixel.Next())
  {
      const UInt_t idx = pixel.GetPixelId();

      Float_t sum = 0.;
      UInt_t  ab0 = 0;
      UInt_t  ab1 = 0;
      
      if (fExtractor)
        CalcExtractor(pixel, sum, (*fPedestalsIn)[idx]);
      else
        CalcSums(pixel, sum, ab0, ab1);

      fSumx[idx] += sum;

      if (fIntermediateStorage)
        (*fPedestalsInter)[idx].Set(sum,0.,0.,fUsedEvents);

      const Float_t sqrsum = sum*sum;

      fSumx2[idx]  += sqrsum;
      fSumAB0[idx] += ab0;
      fSumAB1[idx] += ab1;

      if (fUseSpecialPixels)
        continue;

      const UInt_t aidx   = (*fGeom)[idx].GetAidx();
      const UInt_t sector = (*fGeom)[idx].GetSector();      

      fAreaSumx[aidx]      += sum;
      fSectorSumx[sector]  += sum;

      fAreaSumx2[aidx]     += sqrsum;
      fSectorSumx2[sector] += sqrsum;

      fAreaSumAB0[aidx]    += ab0;
      fAreaSumAB1[aidx]    += ab1;
      
      fSectorSumAB0[aidx]  += ab0;
      fSectorSumAB1[aidx]  += ab1;
  }
  
  fPedestalsOut->SetReadyToSave();

  return kTRUE;
}


void MPedCalcPedRun::CalcExtractor(const MRawEvtPixelIter &pixel, Float_t &sum, MPedestalPix &ped)
{
    const Bool_t abflag = pixel.HasABFlag();

    Byte_t *first  = pixel.GetHiGainSamples() + fExtractWinFirst;
    Byte_t *logain = pixel.GetLoGainSamples();

    Byte_t  sat = 0;

    Float_t dummy;
    fExtractor->FindTimeAndChargeHiGain(first,logain,sum,dummy,dummy,dummy,sat,ped,abflag);
}

void MPedCalcPedRun::CalcSums(const MRawEvtPixelIter &pixel, Float_t &sum, UInt_t &ab0, UInt_t &ab1)
{

  Byte_t *higain = pixel.GetHiGainSamples() + fExtractWinFirst;
  Byte_t *ptr = higain;
  Byte_t *end = ptr + fExtractWinSize;

  const Bool_t abflag = pixel.HasABFlag();

  Int_t sumi = 0;
      
  Int_t  cnt = 0;
  do
  {
      sumi += *ptr;
      if (!pixel.IsABFlagValid())
          continue;

      const Int_t abFlag = (fExtractWinFirst + abflag + cnt) & 0x1;
      if (abFlag)
          ab1 += *ptr;
      else
          ab0 += *ptr;

      cnt++;
  } while (++ptr != end);

  if (fOverlap != 0)
  {
      ptr = pixel.GetLoGainSamples();
      end = ptr + fOverlap;

      do
      {
          sumi += *ptr;
          if (!pixel.IsABFlagValid())
              continue;

          const Int_t abFlag = (fExtractWinFirst + abflag + cnt) & 0x1;
          if (abFlag)
              ab1 += *ptr;
          else
              ab0 += *ptr;

          cnt++;
      } while (++ptr != end);
  }

  sum = (Float_t)sumi;
}

// --------------------------------------------------------------------------
//
// Compute signal mean and rms in the whole run and store it in MPedestalCam
//
Int_t MPedCalcPedRun::Finalize()
{
    if (fUsedEvents == 0)
        return kTRUE;

    //
    // Necessary check for extraction of special pixels
    // together with data which does not yet have them
    //
    if (fSumx.GetSize()==0)
        return kTRUE;

    MRawEvtPixelIter pixel(fRawEvt);
    while (pixel.Next())
        CalcPixResults(fUsedEvents, pixel.GetPixelId());

    if (!fUseSpecialPixels)
    {

        //
        // Loop over the (two) area indices to get the averaged pedestal per aidx
        //
        for (UInt_t aidx=0; aidx<fAreaValid.GetSize(); aidx++)
            if (fAreaValid[aidx]>0)
                CalcAreaResults(fUsedEvents, fAreaValid[aidx], aidx);

        //
        // Loop over the (six) sector indices to get the averaged pedestal per sector
        //
        for (UInt_t sector=0; sector<fSectorValid.GetSize(); sector++)
            if (fSectorValid[sector]>0)
                CalcSectorResults(fUsedEvents, fSectorValid[sector], sector);
    }

    fPedestalsOut->SetTotalEntries(fUsedEvents*fExtractWinSize);
    fPedestalsOut->SetReadyToSave();

    return kTRUE;
}

Int_t MPedCalcPedRun::PostProcess()
{
    if (!fRawEvt)
        return kTRUE;

    if (!Finalize())
        return kFALSE;

    return MExtractPedestal::PostProcess();
}

//-----------------------------------------------------------------------
// 
// Return if the pedestal bit was set from the calibration trigger box.
// The last but one bit is used for the "pedestal-bit".
//
// This bit is set since run gkFirstRunWithFinalBits
//
Bool_t MPedCalcPedRun::IsPedBitSet()
{
    if (fRunHeader->GetRunNumber()<gkFirstRunWithFinalBits)
        return kFALSE;

    if (!fTrigPattern)
        return kFALSE;

    return (fTrigPattern->GetPrescaled() & MTriggerPattern::kPedestal) ? kTRUE : kFALSE;
}

void MPedCalcPedRun::Print(Option_t *o) const
{
    MExtractPedestal::Print(o);

    const Int_t last = fExtractor 
      ? fExtractWinFirst + fExtractor->GetWindowSizeHiGain() -1
      : fExtractWinLast;

    *fLog << "ExtractWindow from slice      " << fExtractWinFirst << " to " << last << " incl." << endl;
    *fLog << "Num overlap lo-gain slices:   " << fOverlap << endl;
    *fLog << "First pedrun out of sequence: " << (fIsFirstPedRun?"yes":"no") << endl;
    *fLog << "Number of used events so far: " << fUsedEvents << endl;
}