source: tags/Mars-V0.9.1/NEWS@ 17827

Last change on this file since 17827 was 6942, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 31.0 KB
Line 
1 -*-*- END -*-*-
2 *** Version 0.9.1 (2005/04/14)
3
4 - Fix bug on the arrival time reconstruction when using Digital
5 Filter (in some marginal cases (10%) times were reconstructed shifted
6 by 0.2 slices)
7
8 - all executables now return 2 where in previous versions -1 has
9 been returned (gave problems with shell-scripts)
10
11 - the Hi-/Lo-Gain intercalibration for monte carlo files is now
12 also done with a intercalibration input file
13
14 - a bug in the time fine adjustment of the digital filter has been fixed
15
16 - a lot of small fixes to calling TPad::Divide with a margin==0
17
18 - MStatusDisplay now shows the memory usage
19
20 - added a memory leak statistic after the eventloop
21
22 - MHadronness replaced by MParameterD
23
24 - wobble mode can now be switched on from the data-set
25
26 - switched on bad pixel detection for a pedestal level
27 which is more than 5 times the variance
28
29 - Fixed default paths to be correct for the new data center
30
31 - Fixed handling of drive data. The pointing position in now
32 copied to MPointingPos inside star for real and MC events
33
34 - made sure, that the sequences in a dataset are sorted by
35 their number to ensure the correct synchronization
36
37 - added all resource files necessary to handle spline extraction
38 of signal for the late 2004 and the early 2005 data
39
40 - update the reference lines for the december data
41
42 - changed default for fgHiGainFirst from 2 to 0 in spline extractor
43 This is important for the Dec. and Jan. data where the calibration
44 pulse position changes much.
45
46 - changed default for fgOffsetFromLogain from -1.8 to -2.8 in digital
47 filter. This corrects only an defective extraction of the MC at low-gain
48 signals lower than 90 phes.
49
50 - fixed some slowdown in calibrating data with interleaved events from
51 Jan and Dec.
52
53 - implemented new values from new starguider report as defined
54 in TDAS00-07 V7.1 (eg SkyBrighness)
55
56 - Fixed the formerly wrong unit of azimuth and zenith angle deviation
57 in starguider report (If you merpp the same reports with this version
58 you'll get the correct units (arcmin) but a different result
59 than with old versions (wrong units))
60
61 - As a workaround made the pretty palette the default. The inverse
62 Depp Blue Sea has a bug which slows down long calibration runs a lot.
63
64 - added a lot of scripts and macros in directory datacenter used
65 for automatic processing
66
67
68
69 *** Version 0.9 (2005/03/23)
70
71 - Calibration is now done autmatically into photo-electrons like
72 decided by the Collaboration Board
73
74 - Reference lines in the display can be read from resource file
75
76 - Interlaced calibration events can be handled by callisto
77
78 - Hi-Gain vs. Lo-Gain calibration constants can be calculated
79 and applied in callisto.
80
81 - class MJCalibTest can be called by callisto
82
83 - callisto can now run with three data types: rawdata, rootdata, MC
84
85 - added two classes mreport/MReportStarguider.cc and
86 mreport/MReportStarguider.h for implementing starguider-data
87
88 - the output of merpp-update now contains starguider information:
89 MReportStarguider and MTimeStarguider
90
91 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
92 values were lower than they should. This was more visible for high
93 energy (Size) events.
94
95 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
96
97 - added a new loop to callisto to support the correct extraction of
98 the pedestal and pedestal rms through the signal extractor
99
100 - added class to perform fourier tranformation of a hexagonal structure
101 (MHexagonalFT)
102
103 - added class to perform fourier tranformation of a hexagonal structure
104 in a tasklist (MHexagonalFTCalc) example: hft.C
105
106 - added class to enhance the MCerPhotEvt from the Magic camera geometry
107 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
108 small pixels, example: extendcam.C
109
110 - added possibility to write data to memory (TTree) using MWriteRootFile
111
112 - added possibility to read a TTree stored only in memory by MReadTree
113
114 - new classes to deal with the interleaved calibration events:
115 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
116
117 - implemented filters to callisto to skip calibration events
118
119 - changed callisto to calculate three kinds of pedestals and pedestal rms:
120 + fundamental pedestal (MPedPhotFundamental): extracted directly from
121 the slices by statistics
122 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
123 signal extractor without randomization
124 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
125 with the signal extractor with randomization (extraction window is
126 randomly fixed)
127 The three kind of pedestal is not yet implemented (for speed reasons) as
128 long as nobody really needs it:
129 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
130 extracted with the signal extractor with randomization
131
132 - callisto now finds the pulse position in the data automatically
133
134 - implemented data reduction in calibrated data by reducing the precision
135 of the stored floating point values (pedestal, rms and signal) to
136 roughly 0.5%
137
138 - fixed showplot to make file format conversion (eg. converting a
139 status display stored in a root file into a postscript file) in
140 batch mode possible:
141 showplot -b --save-as-ps[=outfile.ps] infile.root
142
143 - Allow class names as part of filter rules, eg
144 (MFSupercuts) && (MHillas.fSize>100)
145
146 - fixed a lot of stuff to allow all programs to process MonteCarlo
147 camera files.
148
149 - enhanced possibility to debug reading of resource file
150
151 - MDataChain should handle priorities of operator more
152 accurate now
153
154 - completely revised the container in which the signal is stored
155 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
156 * the new implementation is faster and
157 * needs less storage space
158
159 - FIRST version which can process Monte Carlos through the
160 whole chain of programs (callisto, star, etc)
161
162 - implemented new image parameters for the border length of
163 the shower image (MNewImagePar2)
164
165 - implemented wobble-mode in ganymed
166
167 - new class (MJOptimize) taking care of all optimization processes
168
169
170
171 *** Version 0.8.6 (2004/10/05)
172
173 - New combined signal and time extractor
174 MExtractTimeAndChargeDigitalFilter
175
176 - The Report for the trigger section in the CC run summary has been
177 updated, and now the IPRs (Individual Pixel Rates) are available.
178
179 - new macros for database interaction: filldotrun.C, filldotrbk.C
180
181 - added new program which can convert colored output which was redirected
182 into a file back into colored text (for example to display it with
183 more): showlog
184
185 - added new program to display an MStatusArray of plots (stored with
186 MStatusDisplay) from a file: showplot
187
188 - Added support for Sequences (MSequence). Sequences are blocks of run
189 files containing the same calibration and belonging to the same
190 source
191
192 - Added a new task (MTaskEnv) which can be used in setup files to switch
193 between different tasks (for example to choose a signal extractor)
194
195 - Implemented automatic file splitting in MWriteRootFile
196
197 - After image cleaning an island index is assigned to all used pixels.
198 The index corresponds to the order of the islands in size.
199
200 - added a cleaning which takes signal height _and_ arrival time into
201 account: probability cleaning (for more details see MImgCleanStd)
202
203 - added a cleaning which takes takes the absolute number of photons
204 times the area ratio as cleaning level
205 (for more details see MImgCleanStd)
206
207 - Changed calculation of image parameters such, that it can be done
208 for all used pixels or the pixels with a defined island index only
209
210 - implemented new image parameters displaying the number of islands,
211 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
212
213 - event display in executable changed to support also calibrated files
214 (done with MJCalibrateSignal)
215
216 - added program doing the calibration and the signal extraction
217 and signal calibration: callisto Most part of the setup is done
218 by a resource file: callisto.rc
219
220 - implemented support for pixels with negative IDs (Raw file format
221 version 4)
222
223 - implemented an new option in merpp (--auto-time) to get the time
224 range for cc and/or caco data from the run header of the raw data
225
226 - New star-program (star and MJStar). Taking calibrated data from
227 callisto/MJCalibrateSignal as input. The setup is done through
228 a resource file: star.rc
229
230 - Added possibility to setup the eventloop in the mars-executable
231 Camera Display by a resource file: mars.rc
232
233 - The the mars-executable Camera Display can now also read
234 calibrated data files written by callisto/MJCalibrateSignal
235
236 - Added a new class which can calculate the source position in
237 the camera from a pointing model known to be correct and
238 the pointing model used for observations (MSrcPosFromModel)
239
240 - added a new version of the class calculating the effective on-time
241 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
242 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
243 MHTimeDiffTheta.
244
245 - added the possibility to count how often a signal is above (or
246 below) a certain threshold in MHCamEvent and MHCamEventRot (this
247 can replace MHTriggerLvl0)
248
249 - added ore convinient ways to set the axis-titles of your histograms
250 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
251 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
252
253
254
255 *** Version 0.8.5 (2004/08/06)
256
257 - new Signal Extractors: MExtractFixedWindowSpline
258 and MExtractAmplitudeSpline
259
260 - implementes interleave in merpp to be able to merpp parts of a file
261
262 - implemented force-functionality to merpp
263
264 - star display to display star catalogs (MAstroCatalog)
265
266 - star display to 'mirror' stars to the camera (MAstroCamera)
267
268 - implemented a new cleaning option which allows cleaning scaled with
269 the real ratio of the rms depending on the pixel size, not only the
270 square root of the pixelsize (MImgCleanStd, MCameraData)
271
272 - removed obsolete MBlind* classes
273
274 - Signal extractor taking the AB flag into account implemented (this makes
275 an odd number of slices for signal extraction possible
276 (MExtractSignalABcorr)
277
278 - implemented a class extracting the pedestal from the raw-data (events)
279 itself using empty lo-gain (MpedCalcFromLoGain)
280
281 - Added mean values to MPedPhotCam
282
283 - Added Makefile for Darwin (this OS is NOT officially supported!)
284
285
286
287 *** Version 0.8.4 (2004/04/19)
288
289 - new fast arrival time extractor using cubic splines:
290 MExtractTimeFastSpline
291
292 - implementes multi-argument support in MDataChain
293 ("pow(a, b)")
294
295 - implemented double reference support in MDataChain
296 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
297
298 - added support in MF for expressiond like
299 "MHillas.fWidth<2*<MHillas.fLength"
300
301 - MDataChain is now able to support variables like [0], [1], ...
302 which can be used in fit functions as parameters. The interface
303 is implemented through the new virtual function
304 MParContainer::SetVariables
305
306 - added new class MArrivalTimeCam/MArrivalTimePix:
307 Storage containers to hold the ArrivalTime of the camera/pixel
308
309 - added new classes for the calibration of relative arrival times:
310 MCalibrationRelTimePix and MCalibrationRelTimeCam
311
312 - added new classes to extract the signal of the blind pixel and the
313 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
314
315 - added new classes for the bad-pixels treatment (MBadPixels*)
316 which are more powerfull than the old ones (MBlindPixel*)
317 and will replace them.
318
319 - added filter against cosmics: MFCosmics
320
321 - added new class MArrivalTimeCalc2:
322 Calculates the arrival time as the signal weighted mean of the time
323 slices in the maximum window
324
325 - added a new macro call pointspreadfucntion.C that fits with a 2D
326 gaussian the DC spot for an star. It gives you the RMS of
327 the PSF and the center of the star, very useful for misspointing
328 studies.
329
330 - added support for multi-telescope camera files. Added classes
331 MStereoCalc and MStereoPar, classes to calculate and store shower
332 parameters calculated from the data of two telescopes, for the MC
333 studies regarding the MAGIC clone.
334
335 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
336 MC data calibrated in photons instead of ADC counts.
337
338 - added three macros to show the calibration and analysis chain of
339 MC data. The macro starmc.C does both calibration and analysis, producing
340 an output containing Hillas parameters for each event. The macro
341 mccalibrate.C does just the calibration and writes out a file containing
342 pixel information in photons instead of FADC data. The macro starmc2.C
343 reads in such a file and produces an output with Hillas parameters.
344
345 - added MPedPhotCalc to compute pedestals in units of photons, see
346 macro pedphotcalc.C
347
348 - added all class to perform the calibration, see macro calibration.C
349
350 - added class MFFT to perform Fast Fourier Transforms
351
352 - added class MSimulatedAnnealing to perform simulated annealing
353 minimizations
354
355 - added new macro bootcampstandardanalysis.C which holds the skeleton
356 of the analysis chain discussed in the december bootcamp.
357
358 - added support for DAQ raw data file format V2
359
360 - implemented an arbitrary time stamp for the events from raw-data
361 files with file version<3. It is calculated from the run number,
362 the date of start and the FADC clock tick from the first module
363
364 - implemented the correct decoding of the event time-stamp
365 coming from the DAQ for raw-data files with file-version>2
366
367 - added a new classes storing the pedestals in units of photons:
368 MPedPhotPix, MPedPhotCam
369
370 - added support for DC current files from the camera control
371
372 - added support for start- and stop-time when merpping report files
373
374 - added MReportCC storing the weather data from the CC-REPORT
375
376 - added class to fill trainings and test matrices (MTFillMatrix)
377
378 - added a filter performing a software trigger (MFSoftwareTrigger)
379
380 - Added classes to perform parts of the standard analysis (Jobs):
381 + MJPedestals
382 + MJCalibration
383 + MJExtractSignal
384 Note: All of them are preliminary!
385
386 - Added Iterator to iterate over files giving only the run-number
387
388 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
389 the evolution of a sector vs time
390
391
392
393 *** Version 0.8.3 (2003/12/05)
394
395 - adapted Random Forest classes to allow the use with MC
396 multi-telescope files which can be produced with the coming
397 camera version 0.7.
398
399 - added classes to read and interprete central control report files
400 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
401
402 - enhanced merpp (the executable) to support .raw and .rep files.
403
404 - added classes for light calibration (MCalibration* and
405 MHCalibration*) by Markus Gaug. Further work has to be and will
406 be done soon.
407
408 - Added a preliminary 'synchronizer' (MReadReports) which will
409 replace MReadMarsFile as soon as it is finished.
410
411 - Added a tutorial macro demonstrating how report files are merpped
412 and how they can be read from the root file in the correct order
413 of time (readrep.C)
414
415 - Added a generalized histogram (similar to MH3) called MVsTime
416 which allows to plot variables (or rules - MDataChain - of
417 variables) vs time. For an example have a look at tempvstime.C.
418
419 - Changed the name of the event trees:
420 + Events --> Events
421 + PedEvents --> Pedestals
422 + CalEvents --> Calibration
423
424 - changed name of MTime in the event trees from MRawEvtTime to MTime
425
426 - added displaying the sector indices to the mars event display
427
428 - Magic Online Analysis (MOnA) implemented in a first version
429 (see mona.cc, MOnlineDump and MOnlineDisplay)
430
431 - added classes to calculate event rate
432 (preliminary: MEventRateCalc, MEventRate)
433
434 - added new executable 'readdaq' to read *.raw files from the DAQ directly
435
436 - added classes dealing with the telescope pointing position (MPointing*)
437
438 - implemented the 'final' Mars time stamp based on some experiences with
439 the new 'Synchonizer'
440
441
442
443 *** Version 0.8.2 (2003/11/10)
444
445 - accelerated standard analysis by a factor of 6-8 ...
446 + doing precalculations in MGeomCam for the pixel area ratio
447 + creating a look up table for the single pixels in MCerPhotEvt
448
449 - added task to calculates weights in case you want to 'change'
450 the energy spectrum of a monte carlo file
451 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
452
453 - added a new executable star which implements the
454 star.C macro as precompiled executable. Currently a flexible
455 setup is not possible, but a 'input card' setup will follow.
456
457 - Starting to implement Multi-Telescope-Support based on the
458 upcomming camera version 0.7. The base for a general support
459 is implemented and the star-functionality is proven to work.
460
461 - Replaced Event-Display in and Camera-Display in the Mars GUI
462 executable by a more convinient display base on MStatusDisplay.
463
464 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
465
466
467
468 *** Version 0.8.1 (2003/10/20)
469
470 - added signal subtraction for pure on data by means of fitting
471 the background in the off region or by performing a combined
472 signal/background fit. Provides necessary histograms for
473 obtaining energy spectra and a light curve.
474
475 - added classes to perform and study the selection of the
476 2nd Level Trigger on MC data (example in triglvl2.C macro)
477
478 - added pedestal calculation
479
480 - implemented "democratic cleaning" (tail cut value proportional
481 to pixel area) according to Wolfgang's suggestion.
482
483 - added Sigmabar treatment (calculation and basic histogramming)
484
485 - added basic routines to apply padding
486
487 - added first implementation of MARS-based source visibility plotter
488 (needs to be linked against slalib, preliminary version)
489
490 - enhanced functionality of data chains: random numbers, conversion
491 functions and access to MHMatrix objects
492
493 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
494 numbers under certain circumstances (runs with 0 events included)
495
496 - fixed a bug in the general filter MF (didn't work on some systems
497 at all)
498
499 - fixed a bug in chaining files, which caused the analysis to crash or
500 ignore files
501
502 - implemented more geometry classes describing the parameters used
503 to simulate the PMT camera
504
505 - added new Monte Carlo classes containing the setup of the different
506 programs in the MC chain.
507
508 - added a (preliminary) general task to evaluate chi-square of a given
509 parameter in an eventloop.
510
511 - first implementation of a container describing the observatory
512 location (Long, Lat, etc)
513
514 - added Random Forest - method for g/h-separation
515
516 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
517 (this means, that it is compiling, but not yet fully tested)
518
519 - added a new status display which can show the present status
520 of histograms while an eventloop is running (MStatusDisplay,
521 an example can be found at status.C)
522
523 - reorganized directories:
524 classes describing the image --> mimage
525 classes containing Monte Carlo Histograms --> mhistmc
526 classes for Random Forest method --> mranforest
527
528 - added (event-)weights to fill histograms
529
530 - colors in logging output to screen
531
532 - changes to the Image Parameter declaration:
533 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
534 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
535 + MHillasExt now derives from MParContainer instead of MHillas
536 --> Files written with the old definition are more or less unreadable
537
538 - reading of reflector files
539
540 - display data from reflector files in the camera
541
542 - implemented currents (and display them in the camera)
543
544 - logarithmic scale in camera
545
546 - added class to iterate through directory contents (MDirIter)
547
548
549
550 *** Version 0.8 (2002/11/18)
551
552 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
553
554 - corrected 48(!) wrong entries in the Next Neighbor table of the
555 Magic Camera (all in the inner part of the outer ring, mostly
556 missing a single NN)
557
558 - Fixed a bug in the table describing the Next Neighbours of the
559 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
560 have any neighbour)
561
562 - changed trigrate.C: now it calculates the pure NSB triggers from
563 a camera file (generated with no showers), so there is no need
564 to introduce them by hand in the BgR array (for more details
565 please ask Abelardo)
566
567 - added MHHadronness (and MHadronness) as a general facility to evaluate
568 the quality of a gamma-hadron seperation method
569
570 - changed MWriteAsciiFile to accept rules (MDataChain)
571
572 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
573 must be replaced by calles to MWriteAsciiFile::AddColumn and
574 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
575 changed.
576
577 - Implemented generalized event-matrices (one row per event)
578 (MHMatrix)
579
580 - implemented the one dimensional composite probabilities
581 (MHCompProb, MCompProbCalc, comprob.C)
582
583 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
584 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
585
586 - Added a camera display displaying the pixel numbers to the
587 event display gui.
588
589 - Added Monte Carlo Informations to event display gui
590
591 - Changed the camera display to display the pixel numbering
592
593 - Added three buttons to the camera display to change the palette
594
595 - Added the number of used and core pixels after image cleaning
596 to MHillas
597
598 - Changed the algorithm used in MHillas according to TDAS 02-03
599
600 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
601
602 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
603
604 - Added fCosDeltaAlpha to MHillasSrc
605
606 - The numbers of photons used to calculate fConc and fConc1 in
607 MHillasExt are now scaled with the pixel size, so that one get
608 a four times smaller value for the bigger pixels in the outer ring.
609
610 - added new task to smooth the camera contents (MCameraSmooth)
611
612 - added possibility to use interpolated pixel values for blind pixels
613 instead of removing it completely from the analysis
614
615 - Implemented the possibility to save the whole eventloop with
616 its setup to a file. This information can be read and from
617 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
618 and MEvtLoop::MakeMacro. If you find something not working, please
619 report - this stuff is still in a beta phase.
620
621 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
622 file having crab starfield, but also for all following files - fixed
623
624 - MTaskList::PrintStatistics can now be instructud to print also the
625 title, too: use PrintStatistics(0, kTRUE)
626
627 - Changed the image cleaning so that pixels with to many 'used'
628 neighbors are left used (to get rid of 'holes' in events)
629
630 - Introduced more output to the camera displays
631
632 - Added an array of histograms (eg one hist per run), MHArray
633
634 - Added a _preliminary_ version of the reader for CT1 PreProc files
635 (MCT1ReadPreProc)
636
637 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
638 (thanks to Raquel)
639
640 - added the first energy estimator (MEnergyEstParam, estimate.C,
641 estfit.C) using a parametrization
642
643 - Added some new Monte Carlo paremeter containers used to store
644 setup information from the MC chain (MMcConfigRunHeader,
645 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
646
647
648
649 *** Version 0.7 (2002/04/30)
650
651 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
652 the pedestal mean value was saved incorrectly. For files from
653 this versions we substract 0.5 from the pedestal mean.
654 WARNING: This may effect your results, so don't wonder...
655
656 - First implementation of an algorithm using only triggered events
657 for the collection area calculation
658
659 - Ascii Output can now also be used for parameter containers which
660 doesn't overload MParCointainer::AsciiWrite
661
662 - The Ascii Output is now also capable of writing single data members
663 of one container
664
665 - You are now able to change the order of the values written to the
666 ascii file
667
668 - You can now specify a conversion factor for each data member written
669 to an ascii file. This may be usefull to change the units of the
670 data member (eg. degrees instead of millimeters in case of the
671 hillas parameters)
672
673 - Replaced old MHillas by a new structure which allows you to extend
674 the parameters stored in MHillas very easily:
675 see MHillas and MHillasExt
676
677 - Added classes to handle source dependancy of image parameters:
678 see MHillasSrc
679
680 - Added container (MBinning) to have a standard input for the binning
681 in different histograms (eg. the Energy bins should be the same in
682 all histograms)
683
684 - Changed Hillas histograms from mm to deg
685
686 - Added the flexible binning to the hillas histograms
687
688 - Added a filter for the alpha parameter (MFAlpha)
689
690 - It is now possible to write single data members of a class object to
691 an output stream instead of the whole container only
692
693 - Added a generalized filter for a data member:
694 MFDataMember filter("MHillas.fWidth", '<', 0.5);
695
696 - Added a generalized Filter parser for more difficult filter rules
697 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
698
699 - Added new Monte Carlo histograms:
700 MHMcEnergyImpact and MHMcEfficiency
701
702 - Added many new histograms needed for the flux calculation.
703
704 - Added a generalized histograms which can fill and show up to three
705 data members in either a one-, two- or three-dimensional histogram, eg:
706 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
707
708 - Added:
709 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
710 * calculation of <Theta> as a function of time (MHThetabarTime)
711 they are needed in the flux calculation in
712 order to select for a given bin in Theta (or time) the appropriate
713 effective collection area, which is assumed to be given as a function
714 of Theta and the true energy
715
716 - Added calculation of the migration matrix in the energy
717 (MHMcEnergyMigration):
718 the migration matrix describes the migration from the true (E_true)
719 to the estimated energy (E_est); it is needed to determine the
720 distribution of E_true from the measured distribution of E_est
721 by unfolding
722
723 - changed the color palette in the camera display to DeapSea.
724
725
726
727 *** Version 0.6 (2002/01/15)
728
729 - Introduce the option of disable pixels (MBlindPixels and
730 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
731 able to deal with Star Field NSB.
732
733 - Fixed a bug in the pedestals substraction
734
735 - Introduced verbosity levels
736
737 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
738
739 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
740 work correctly (thanks to Abelardo)
741
742 - Introduced correct treatment of the diffuse Night Sky Background
743 and NSB (MMcPedestalNSB)
744
745 - Corrected treatment of the electronic noise (MMcPedestalCopy)
746
747 - Introduced MMcRunHeaders which contains monte carlo run informations
748
749 - Added a 'Print'-Task (MPrint) which calls the Print function
750 of a parameter container for each event
751
752 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
753
754 - changes to be more efficient with root 3.02/06
755
756 - root 3.02/06 fixes:
757 + the memory leak when reading MRawEvtData
758 + loosing more time than necessary to update the progress bar
759
760 - MWriteAsciiFile is now capable of writing more than one container
761 in a line. For example: To be able to write Monte Carlo and
762 Hillas values (energy and alpha) in one line.
763
764
765
766 *** Version 0.5 (2001/11/06)
767
768 - Added new GUI functionality (Analysis)
769
770 - Added a camera display to be able to display events in the camera
771 together with the calculated hillas ellipse
772
773 - Added a 'Clone'-Task (MClone) which can clone a parameter container
774 object at any state of the analysis, so that the output are several
775 states
776
777 - Fixed a bug in the collection area error calculation
778 (Thanks to Ciro and Abelardo)
779
780 - Fixed a bug which causes merpp to crash in some environments
781
782 - Implemented auto enabling scheme for Branches to speed up reading
783 a lot (see MReadTree and MTask)
784
785 - Fixed a bug in the Histogram classes which caused histograms to
786 be written to a file by MWriteRootFile without request
787
788 - changed the object I/O from the old stylish root I/O to the new
789 'auto evolution scheme' This was done only for classes which are not
790 yet used in Monte Carlo files, so that these files are still readable.
791
792 - Added support for a progress bar in MEvtLoop and MReadTree
793 (see the Analysis Window in Mars for an example)
794
795 - Fixed a bug in the package creation which disturbed the conversion
796 between a mars version unpacked from a tar file and the repository.
797
798 - Changed the code to writer merpped (converted into root format)
799 raw files, to get faster (around 10%)
800
801
802
803 *** Version 0.4 (2001/09/20)
804
805 - This release is made to compile on a root version >= 3.00
806
807 - Fixed a bug which causes MReadTree to read the first file only
808
809 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
810
811 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
812
813 - Added a task to write several container to a root file (MWriteRootFile)
814
815 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
816
817 - Added calculation of the collection area (MMcCollectionAreaCalc)
818
819 - fixed some bugs in the Hillas calculation
820
821 - added filters to be able to control the task execution dependent on
822 a parameter (for example: the number of level 1 triggers in a MC-file)
823
824
825
826 *** Version 0.3 (2001/04/23)
827
828 - Many demo macros added
829
830 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
831
832 - Hillas Calculation added
833
834 - Standard image cleaning available
835
836 - MReadTree is now able to handle more than one file
837 (Remark: of the same structure)
838
839 - Now we are able to display events in a first version of the
840 Camera event display. To do this we must run the macro
841 "macros/readCT1.C" to read data from CT1.
842
843
844
845 *** Version 0.2 (2001/01/24)
846
847 - First Implementation of a Gui to read the raw data. Start the
848 gui with the command mars.
849
850
851
852 *** Version 0.1 (2000/12/20)
853
854 - First official release 0.1
855
856 - Changes:
857
858 + changed calling style of MRawPixelIterator from do...while to
859 while-loop
860
Note: See TracBrowser for help on using the repository browser.