#!/bin/bash
#
# This a script, which launches other scripts (all scripts, that are run 
# on primary basis)
#

source `dirname $0`/../Sourcefile.sh
printprocesslog "INFO starting $0"

set -C
shopt -s expand_aliases

# function to continue in loop and go to next script
function sleepawhile()
{
   usedsleeptime=$sleeptime
   case $1 in 
      "error") if ! [ "$errorsleeptime" = "" ]
               then 
                  if [ $errorsleeptime -lt $sleeptimelimit ]
                  then 
                     errorsleeptime=`echo " $errorsleeptime + $errorsleeptimedefault " | bc`
                  fi
                  usedsleeptime=$errorsleeptime
               fi
               ;;
         "ok") errorsleeptime=$errorsleeptimedefault
               ;;
   esac
   echo `date +%F\ %T`" sleeping "$usedsleeptime" seconds... (status: "$1")" >> $jmscriptlog 2>&1
   echo "" >> $jmscriptlog 2>&1
   sleep $usedsleeptime
   continue
}

echo "" >> $jmscriptlog 2>&1
echo "" >> $jmscriptlog 2>&1
echo -n `date +%F\ %T`" starting jobmanager for setup "$AUTOMATIONSETUP >> $jmscriptlog 2>&1

user=`whoami`

# choose commands according to queueing system (defined in setup)
case $queuesys in
      sge)  echo " on queuing system 'sun grid engine'" >> $jmscriptlog 2>&1
            # (-hard) -l hostname=compute-*
            #   for qstat this returns the jobs running on that node + all jobs in the queue
            alias 'queuesubmit'='$sgepath/qsub -b y -q `echo ${queues[$i]}` -t 1-`echo $tosubmit` -v AUTOMATIONSETUP=$AUTOMATIONSETUP -v night=$night -v seqid=$seqid -e `echo $runlogpath`/error-`echo $date`.log -o `echo $runlogpath`/log-`echo $date`.log `echo $noderequirementsub` -N `echo $step` `echo $scriptspath`/`echo ${scripts[$i]}` '
            #alias 'queuesubmit'='$sgepath/qsub -b y -q fact_long -t 1-`echo $tosubmit` -v AUTOMATIONSETUP=$AUTOMATIONSETUP -e `echo $runlogpath`/error-`echo $date`.log -o `echo $runlogpath`/log-`echo $date`.log `echo $noderequirementsub` -N `echo $step` `echo $scriptspath`/`echo ${scripts[$i]}` '
#            alias 'queuesubmit'='$sgepath/qsub -b y -v AUTOMATIONSETUP=$AUTOMATIONSETUP -e `echo $runlogpath`/error-`echo $date`.log -o `echo $runlogpath`/log-`echo $date`.log `echo $scriptspath`/`echo ${scripts[$i]}` '
#            alias 'queuesubmit'='$sgepath/qsub -sc runlogpath=`echo $runlogpath` -sc date=`echo $date` -sc scriptspath=`echo $scriptspath` -sc script=`echo ${scripts[$i]}` `echo $scriptspath`/job.sge '
            # FIXME: get complete scriptname (including command line option), needed for runstereo
            alias 'checkqueue'="$sgepath/qstat \`echo \$noderequirementstat\`  | awk ' { print \"Owner\"\$4\" \" \$3\"Jobstatus\"\$5 } '"
            #break
            ;;
#      pbs)  echo " on queuing system 'pbs'" >> $jmscriptlog 2>&1
#            alias 'queuesubmit'='$pbspath/qsub -t 1-`echo $tosubmit` -l walltime=`echo $walltime` -l pmem=`echo $pmem` -v AUTOMATIONSETUP=$AUTOMATIONSETUP,SOURCEFILEPATH=$SOURCEFILEPATH,SCRIPTNAME=`echo ${scripts[$i]}` -e `echo $runlogpath`/error-`echo $date`.log -o `echo $runlogpath`/log-`echo $date`.log `echo $noderequirementsub` `echo $scriptspath`/`echo ${scripts[$i]}` '
#            # check queue (restricted to current user only)
#            alias 'checkqueue'="$pbspath/qstat -a -u $user | awk ' { print \"Owner\"\$2\" \" \$4\"Jobstatus\"\$10 } '"
#            #break
#            ;;
#   condor)  echo " on queuing system 'condor'" >> $jmscriptlog 2>&1
#            alias 'queuesubmit'='$condorpath/condor_submit -a path=`echo $scriptspath` -a prog=`echo ${scripts[$i]}` -a date=`echo $date` -a dir=`echo $runlogpath` -a num=`echo $tosubmit` -a automationsetup=$AUTOMATIONSETUP `echo $scriptspath`/run.condor'
#            alias 'checkqueue'='$condorpath/condor_q -global -format "Owner%s " Owner -format "%s" CMD -format "Jobstatus%s\n" Jobstatus '
#            #break 
#            ;;
        *)  echo "" >> $jmscriptlog 2>&1
            finish >> $jmscriptlog 2>&1
            ;;
esac

echo "" >> $jmscriptlog 2>&1

# for processing with local storage on different nodes
currentnode=$minnode
numevaluated=0

# endless loop
notcount=0
errorsleeptime=$errorsleeptimedefault
while (( $notcount < 100 ))
do
   # get and set some information for the processing
   source `dirname $0`/../Sourcefile.sh
   # reset some values
   tosubmit=0
   idleratio=0
   addtoscript=
   
   # get processes in queue
   q=(`checkqueue 2>&1 `)
   if echo $q | egrep \(Error\|failed\)
   then 
      echo `date +%F\ %T`" WARN checking query ($queuesys) failed" >> $jmscriptlog 2>&1
      printprocesslog "WARN checking query ($queuesys) failed"
      echo `date +%F\ %T`" WARN checking query ($queuesys) failed" >> $jmerrorlog
      sleepawhile "error"
   fi

   # general check whether one should submit something depending on chosen algorithm
   # algorithm 1: 
   #   submit new jobs in case there are less than $limitidle idle jobs in the queue
   # algorithm 2: 
   #   submit new jobs in case the total number of jobs in the queue has fallen below $totalpno
   case $algorithm in
      1) # algorithm 1
         # get number of idle jobs in the queue
         q5=( `echo ${q[@]} | egrep -o \(Jobstatus1\|Jobstatusq\|JobstatusQ\)` )
         idle=${#q5[@]}
         if [ $idle -gt $limitidle ]
         then 
            echo `date +%F\ %T`" more than "$limitidle" jobs waiting ("$idle")" >> $jmscriptlog 2>&1
            sleepawhile "ok"
         fi
         ;;
      2) # algorithm 2
         # get processes of user in queue
         q1=( `echo ${q[@]} | egrep -o "Owner$user"`)
         queued=${#q1[@]}
         hour=`date +%k`
         # choose array of total number of jobs to be done 
         #   according to the day of the week
         dayofweek=`date +%u`
         case $dayofweek in
            0 | 6)  totalpno=${pnototal[$hour]} ;;
                *)  totalpno=${pnototalwe[$hour]} ;;
         esac
         # get total number of jobs to be submitted
         if [ $queued -gt $totalpno ]
         then 
            echo `date +%F\ %T`" more than "$totalpno" jobs waiting ("$queued")" >> $jmscriptlog 2>&1
            sleepawhile "ok"
         else
            tosubmittotal=`echo "$totalpno - $queued" | bc -l`
         fi
         ;;
      *) echo "Please give an algorithm to calculate the number of allowed jobs."
         exit
         ;;
   esac
   echo `date +%F\ %T`" Total number of jobs to be submitted: "$tosubmittotal >> $jmscriptlog 2>&1

   # first loop to determine 
   # a) how many jobs of this script have to be done
   # b) how many jobs of this script are running or queued
   todo=()
   tododb=()
   for (( i=0 ; i < ${#scripts[@]} ; i++ ))
   do 
      # set the step to be evaluated
      step=${scriptscolname[$i]}
      getstepinfo

      # check if the script is restricted to one node 
      #   (i.e. where output of previous step(s) is stored)
      #   this information is taken from the steps.rc file
      #   currently this is implemented for sge only
      # then get number of jobs to be done 
      if [ "$noderestricted" = "yes" ]
      then
         # get number of next node 
         if [ $numevaluated -ge $numrestrictedscripts ]
         then 
            currentnode=`echo " $currentnode + 1 " | bc -l`
            numevaluated=1
         else
            numevaluated=`echo " $numevaluated + 1 " | bc -l`
         fi
         if [ $currentnode -gt $maxnode ]
         then 
            currentnode=$minnode
         fi
         # check if node is excluded
         for excludednode in ${excludednodes[@]}
         do
            if [ $currentnode -eq $excludednode ]
            then
               echo `date +%F\ %T`" Node compute-0-$currentnode is currently excluded." >> $jmscriptlog 2>&1
               continue 2
            fi
         done
         # define requirement for submission 
         # FIXME: currently only for sge at isdc
         echo `date +%F\ %T`" Checking for node $currentnode. " >> $jmscriptlog 2>&1
         noderequirementsub=" -hard -l hostname=compute-0-${currentnode}"
         noderequirementstat=" -l hostname=compute-0-${currentnode}"
         # get number of jobs to be done from the DB
         getstatus $currentnode >> $jmscriptlog 2>&1
      else
         noderequirementsub=""
         noderequirementstat=""
         # get number of jobs to be done from the DB
         getstatus >> $jmscriptlog 2>&1
      fi
      # store the number of processes to be done for this script
      todo[$i]=$numproc
      tododb[$i]=$numproc
      
      # FIXME: sge cuts scriptname to 8 digits in qstat
      # number of idle jobs, i.e. jobs waiting in the queue to run
      #   condor: 1
      #   sge: q
      #   pbs: Q
      #q4=( `echo ${q[@]} | egrep -o \("${scripts[$i]}"Jobstatus1\|"${scripts[$i]}"Jobstatusq\|"${scripts[$i]}"JobstatusQ\)` )
      q4=( `echo ${q[@]} | egrep -o \("$step"Jobstatus1\|"$step"Jobstatusq\|"$step"JobstatusQ\)` )
      idlescript[$i]=${#q4[@]}

      #q2=( `echo ${q[@]} | egrep -o "${scripts[$i]}"`)
      q2=( `echo ${q[@]} | egrep -o "$step"`)
      queuedscript[$i]=${#q2[@]}

      stillfree[$i]=`echo "${maxjobs[$i]} - ${queuedscript[$i]} " | bc -l`

      if [ $numproc -eq 0 ] || [ ${todo[$i]} -le ${idlescript[$i]} ] || [ ${maxjobs[$i]} -le ${queuedscript[$i]} ]
      then 
         # store the fraction of cpus to add it to another process
         idleratio=`echo " ${ratio[$i]} + $idleratio " | bc -l`
         ratio[$i]=0
         todo[$i]=0
         idlenum=$i
         continue
      fi
   done
   echo `date +%F\ %T`" Evaluated scripts: "${scripts[@]} >> $jmscriptlog 2>&1
   echo `date +%F\ %T`" Running scripts: "${queuedscript[@]}" (max: "${maxjobs[@]}")" >> $jmscriptlog 2>&1
   echo `date +%F\ %T`" Number of jobs to be done (from DB): "${tododb[@]} >> $jmscriptlog 2>&1
   echo `date +%F\ %T`" Number of jobs to be done (updated): "${todo[@]} >> $jmscriptlog 2>&1
   echo `date +%F\ %T`" Ratio: "${ratio[@]}" (idle: "$idleratio")" >> $jmscriptlog 2>&1
   
   # loop to update the ratio taking into account the ratio of
   #   a) steps where nothing has to done
   #   b) steps where already enough jobs are in the queue
   # sum up this idle ratio
   # determine for which step still most jobs have to be done
   if ! [ "$idleratio" = "0" ]
   then 
      addtoscript=
      for (( i=0 ; i < ${#scripts[@]} ; i++ ))
      do 
         if [ ${todo[$i]} -gt ${todo[$idlenum]} ] && [ ${todo[$i]} -gt 0 ] 
         then
            if ! [ "$addtoscript" = "" ] 
            then 
               if [ ${todo[$i]} -lt ${todo[$addtoscript]} ]
               then
                  continue
               fi
            fi
            addtoscript=$i
         fi
      done
      
      # continue in case nothing has to be done for all steps
      # else: update the ratio for the step where most jobs have to be done
      #   by adding the idle ratio
      if [ "$addtoscript" = "" ] 
      then
         echo `date +%F\ %T`" No jobs to be done for any step." >> $jmscriptlog 2>&1
         sleepawhile "ok"
      else
         ratio[$addtoscript]=`echo " ${ratio[$addtoscript]} + $idleratio " | bc -l`
      fi
   fi
   echo `date +%F\ %T`" Updated ratio: "${ratio[@]} >> $jmscriptlog 2>&1
   
   
   # loop to submit jobs to queueing system
   for (( i=0 ; i < ${#scripts[@]} ; i++ ))
   do 
      # calculate number of jobs to be submitted
      tosubmit=`echo "scale=0; $tosubmittotal * ${ratio[$i]} / 1 " | bc -l`
      if [ ${todo[$i]} -lt $tosubmit ]
      then
         echo `date +%F\ %T`" Updating tosubmit for "${scripts[$i]}" from "$tosubmit" to "${todo[$i]} >> $jmscriptlog 2>&1
         tosubmit=${todo[$i]}
      fi
      if [ $tosubmit -eq 0 ]
      then
         echo `date +%F\ %T`" No jobs to be submitted for script '"${scripts[$i]}"'" >> $jmscriptlog 2>&1
         continue
      fi
      if [ $tosubmit -gt ${stillfree[$i]} ]
      then
         echo `date +%F\ %T`" Updating tosubmit for "${scripts[$i]}" from "$tosubmit" to "${stillfree[$i]} >> $jmscriptlog 2>&1
         tosubmit=${stillfree[$i]}
      fi
      
      # set the step to be evaluated
      step=${scriptscolname[$i]}
      # check if walltime has to be set
      if [ "$setwalltime" = "yes" ]
      then
         walltime=${walltimes[$i]}
      fi
      # check if memory has to be set
      if [ "$setpmem" = "yes" ]
      then
         pmem=${pmems[$i]}
      fi

# submitting individual job now giving night and seqid
#      # set $tosubmit to 1 if something is 'qw', because in this case 
#      #   only one line for several jobs might be shown
#      if [ ${idlescript[$i]} -gt 0 ] # && [ "$step" == "Callisto" ]
#      then 
#         tosubmit=1
#      fi
      #echo "tosubmit: "$tosubmit

      # get todo list
      gettodo 
      # setting upper limit for loop
      if [ $num -gt $tosubmit ]
      then
         num=$tosubmit
      fi
      
      for (( s=0 ; s < $num ; s++ ))
      do
         tosubmit=1
         night=${primaries[$s+$s]}
         seqid=${primaries[$s+$s+1]}
         
         echo "submit "${scripts[$i]}" "$night" "$seqid
         
         # set status in DB
         setstatus "startj" 
         
         # submit $tosubmit scripts to queuing system
         echo `date +%F\ %T`" Submitting ("$s"/"$tosubmit") jobs for script '"${scripts[$i]}"' (night:"$night" seq"$seqid") to "$queuesys >> $jmscriptlog 2>&1
         date=`date +%Y-%m-%d`
         if ! queuesubmit 2>> $jmerrorlog
         then 
            echo `date`" WARN submitting job ($queuesys) failed" >> $jmerrorlog
            echo `date +%F\ %T`" WARN $queuesys is not working -> sleeping $errorsleeptime [\$errorsleeptime]" >> $jmscriptlog 2>&1
            printprocesslog "WARN submitting ${scripts[$i]} ($queuesys) failed"
            sleepawhile "error"
         fi
      done
      echo ""
   done
   sleepawhile "ok"
done