| 1 | # DIM_CONTROL: resume data taking after it had to be aborted during first run of four
|
|---|
| 2 | .! echo `date -u` "----------------------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 3 | .! echo `date -u` "resume taking the 4 data runs after DataTaking was aborted..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 4 | .! echo `date -u` "----------------------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 5 | .! echo `date -u` "Operator: make sure bias is switched on and feedback is running!!!" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 6 |
|
|---|
| 7 | # check if bias is ramped up and if feedback is running
|
|---|
| 8 | .s BIAS_CONTROL 9
|
|---|
| 9 | .s FEEDBACK 12
|
|---|
| 10 | .s BIAS_CONTROL 9
|
|---|
| 11 | .! echo `date -u` "bias is on, and feedback-program is working, but we wait 45sec for the current readings..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 12 | .w 45000
|
|---|
| 13 | .! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 14 |
|
|---|
| 15 | #Data Taking with Full Trigger Area (4x5min)
|
|---|
| 16 | .x ScriptsForDimCtrl/ServiceScripts/IsReadyForDataTaking
|
|---|
| 17 | .! echo `date -u` "taking Data:FullTriggerArea 5min Run 1 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 18 | MCP/START 300 -1 data
|
|---|
| 19 | .s FAD_CONTROL 8
|
|---|
| 20 | .s FAD_CONTROL 4
|
|---|
| 21 | .! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 22 |
|
|---|
| 23 | .x ScriptsForDimCtrl/ServiceScripts/IsReadyForDataTaking
|
|---|
| 24 | .! echo `date -u` "taking Data:FullTriggerArea 5min Run 2 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 25 | MCP/START 300 -1 data
|
|---|
| 26 | .s FAD_CONTROL 8
|
|---|
| 27 | .s FAD_CONTROL 4
|
|---|
| 28 | .! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 29 |
|
|---|
| 30 | .x ScriptsForDimCtrl/ServiceScripts/IsReadyForDataTaking
|
|---|
| 31 | .! echo `date -u` "taking Data:FullTriggerArea 5min Run 3 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 32 | MCP/START 300 -1 data
|
|---|
| 33 | .s FAD_CONTROL 8
|
|---|
| 34 | .s FAD_CONTROL 4
|
|---|
| 35 | .! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 36 |
|
|---|
| 37 | .x ScriptsForDimCtrl/ServiceScripts/IsReadyForDataTaking
|
|---|
| 38 | .! echo `date -u` "taking Data:FullTriggerArea 5min Run 4 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 39 | MCP/START 300 -1 data
|
|---|
| 40 | .s FAD_CONTROL 8
|
|---|
| 41 | .s FAD_CONTROL 4
|
|---|
| 42 | .! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 43 |
|
|---|
| 44 | .! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 45 | .! echo `date -u` "This is the end of data taking" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 46 | .! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
|
|---|
| 47 |
|
|---|
