source: trunk/FACT++/scripts/CheckUnderflow.js@ 15116

'use strict';

var Func = function() { };
Func.sum = function(a, b) { return a+b; }
Func.sq  = function(a, b) { return Math.sqrt(a*a + b*b); }
Func.min = function(a, b) { return Math.min(a, b); }
Func.max = function(a, b) { return Math.max(a, b); }
Func.avg = function(arr)  { return arr.reduce(Func.Sum, 0)/arr.length; }
Func.stat = function(arr, func)
{
    if (arr.length==0)
        return undefined;

    var sum = 0;
    var sq  = 0;
    var cnt = 0;
    var min = arr[0];
    var max = arr[0];
    arr.forEach(function(val) { sum+=val; sq+=val*val; if (val>max) max=val; if (val<min) min=val; if (func && func(val)) cnt++ });
    sum /= arr.length;
    sq  /= arr.length;

    return { avg:sum, rms:Math.sqrt(sq-sum*sum), min:min, max:max, count:cnt };
}

// ===================================================================

console.out(("\n%78s".$("")).replace(/ /g, "="));

include('scripts/CheckStates.js');

var table =
[
 [ "MCP",             [ "Idle"      ] ],
 [ "AGILENT_CONTROL", [ "VoltageOn" ] ],
 [ "FTM_CONTROL",     [ "Idle"      ] ],
 [ "FAD_CONTROL",     [ "Connected",    "WritingData"     ] ],
 [ "BIAS_CONTROL",    [ "Disconnected", "VoltageOff"      ] ],
 [ "DATA_LOGGER",     [ "WaitForRun",   "NightlyFileOpen", "Logging" ] ],
];

console.out("Checking states.");
if (!checkStates(table))
{
    throw new Error("Something unexpected has happened. One of the servers",
            "is in a state in which it should not be. Please,",
            "try to find out what happened...");
}

// ===================================================================

include('scripts/Hist1D.js');
include('scripts/Hist2D.js');

console.out("Checking power on time");

var service_drs = new Subscription("FAD_CONTROL/DRS_RUNS");

var runs = service_drs.get(5000, false);
if (!runs)
    throw new Error("Could not connect to FAD_CONTROL/DRS_RUNS");

var power = dim.state("AGILENT_CONTROL").time;
var now   = new Date();

var diff = (now-runs.time)/3600000;

console.out(" * Now:                "+now);
console.out(" * Last power cycle:   "+power);
console.out(" * Last DRS calib set: "+(runs.data?runs.time:"none"));


if (1)//diff>8 && now.getHours()>16 || runs.time<power)
{
    console.out("Checking send.");
    checkSend(["FAD_CONTROL", "MCP", "RATE_CONTROL"]);
    console.out("Checking send: done");

    //console.out("Most probablay the camera has not been checked for underflows yet.");

    var service_event = new Subscription("FAD_CONTROL/EVENT_DATA");

    dim.send("FAD_CONTROL/START_DRS_CALIBRATION");
    dim.send("FAD_CONTROL/SET_FILE_FORMAT", 0);

    // This needs a better solution! The problem is that the
    // event builder might still be writing a file (WritingData),
    // but even if the file is closed (CLOSE_OPEN_FILES) the
    // thread sending data (EVENT_DATA) might still be processing
    // events. Thus there is no real guarantee that we do not receive
    // data of the previous run after we have started a new one.
    dim.wait("FAD_CONTROL", "Connected", 10000);
    v8.sleep(1000); // Let 'timeout' in SendRawData pass

    var event = service_event.get(5000, false);
    var event_counter = event.counter;

    console.out("Starting drs-gain");
    dim.send("MCP/START", -1, 3, "drs-gain");

    console.out("Waiting for new event");

    var d = new Date();
    v8.timeout(10000, function() { if (service_event.get(0, false).counter>event_counter) return true; });
    //while (service_event.get(0, false).counter<=event_counter)
    //    v8.sleep();

    console.out("Event received: "+(new Date()-d)+"ms");

    dim.send("MCP/STOP");

    event = service_event.get(0, false);
    service_event.close();

    console.out("Run stopped.");

    dim.send("RATE_CONTROL/STOP"); // GlobalThresholdSet -> Connected
    dim.wait("MCP", "Idle", 3000);

    var nn = runs.data && runs.data.length>0 && runs.obj['roi']>0 ? runs.obj['run'].reduce(Func.max) : -1;
    if (nn>0)
    {
        console.out("Trying to restore last DRS calibration #"+nn+"  ["+runs.time+"]");

        var night = new Date(runs.time-1000*60*60*12);
        var yy = night.getUTCFullYear();
        var mm = night.getUTCMonth()+1;
        var dd = night.getUTCDate();

        var filefmt = "/loc_data/raw/%d/%02d/%02d/%4d%02d%02d_%03d.drs.fits";

        // FIXME: Timeout
        var drs_counter = service_drs.get(0, false);
        dim.send("FAD_CONTROL/LOAD_DRS_CALIBRATION", filefmt.$(yy, mm, dd, yy, mm, dd, nn));
        while (drs_counter == service_drs.get(0, false).counter)
            v8.sleep();
    }

    var hist = Hist2D(16, -2048.5, 2048.5, 11, -10, 100);

    var data = event.obj;

    for (var i=0; i<1440; i++)
        hist.fill(data.avg[i], isNaN(data.rms[i])?-1:data.rms[i]);

    hist.print();

    var stat0 = Func.stat(data.avg, function(val) { if (val<0) console.out(" VAL="+val); return val<0; });
    var stat1 = Func.stat(data.rms);

    console.out("Avg[min]=%.1f".$(stat0.min));
    console.out("Avg[avg]=%.1f +- %.1f".$(stat0.avg, stat0.rms));
    console.out("Avg[max]=%.1f".$(+stat0.max));
    console.out("Avg[cnt]="+stat0.count);
    console.out("");
    console.out("Rms[min]=%.1f".$(stat1.min));
    console.out("Rms[avg]=%.1f +- %.1f".$(stat1.avg, stat1.rms));
    console.out("Rms[max]=%.1f".$(stat1.max));
    console.out(("%78s\n".$("")).replace(/ /g, "="));

    //      OK                            UNDERFLOW
    // ------------------------------------------------------
    // Avg[min]=722.0                Avg[min]=-380.0
    // Avg[avg]=815.9 +- 45.9        Avg[avg]= 808.0 +- 102.0
    // Avg[max]=930.5                Avg[max]= 931.1
    // Avg[cnt]=0                    Avg[cnt]= 9

    // Rms[min]=14.0                 Rms[min]=13.9
    // Rms[avg]=16.5 +- 1.6          Rms[avg]=18.8 +- 26.8
    // Rms[max]=44.0                 Rms[max]=382.1

    if (stat0.count>0)
    {
        if (stat0.count>8)
            throw new Error("Underflow condition detected in about "+parseInt(stat0.count/9+.5)+" DRS.");

        log.warn("There is probably an underflow condition in one DRS... please check manually.");
    }
}

service_drs.close();