source: trunk/FACT++/src/FAD.h@ 11333

Last change on this file since 11333 was 11333, checked in by tbretz, 13 years ago
Changed some unsigned int to signed int.
File size: 9.7 KB
Line 
1#ifndef FACT_FAD_H
2#define FACT_FAD_H
3
4//---------------------------------------------------------------
5//
6// FAD internal structures
7//
8//---------------------------------------------------------------
9
10 //
11// Other definitions
12//
13#define MAX_ADDR 0xFF // highest address in Config-RAM
14#define BADDR_ROI 0x00 // Baseaddress ROI-Values
15#define BADDR_DAC 0x24 // Baseaddress DAC-Values
16#define BADDR_CONT_TRIGGER_TIME 0x2C // Baseaddress for the continouus trigger timing.
17#define ADDR_RUNNUMBER 0x2D //
18#define MAX_VAL 65535
19#define MAX_ROIVAL 1024
20#define MAX_DACVAL 65535
21
22#define NChannels 9
23#define NBins 1024
24#define NChips 4
25#define NTemp 4
26#define NDAC 8
27
28//
29// Data structures
30//
31
32typedef struct{
33 int hardID ; //hardware ID
34 int pos_i ; //geometrical positon row
35 int pos_j ; // column
36 int G_APD ; //G-APD identifier
37 double V_op ; //operation voltage
38 int HV_B ; //HV Board
39 int HV_C ; //HV Channel
40 double pos_X ; //geometrical position in pixel units
41 double pos_Y ; //
42} PIX_MAP ;
43
44
45typedef struct {
46
47 uint16_t start_package_flag;
48 uint16_t package_length;
49 uint16_t version_no;
50 uint16_t PLLLCK;
51
52 uint16_t trigger_crc;
53 uint16_t trigger_type;
54 uint32_t trigger_id;
55
56 uint32_t fad_evt_counter;
57 uint32_t REFCLK_frequency;
58
59 uint16_t board_id;
60 uint8_t zeroes;
61 int8_t adc_clock_phase_shift;
62 uint16_t number_of_triggers_to_generate;
63 uint16_t trigger_generator_prescaler;
64
65 uint64_t DNA;
66
67 uint32_t time;
68 uint32_t runnumber;
69
70 int16_t drs_temperature[NTemp];
71
72 int16_t dac[NDAC];
73
74} __attribute__((__packed__)) PEVNT_HEADER;
75
76typedef struct {
77uint16_t id;
78uint16_t start_cell;
79uint16_t roi;
80uint16_t filling;
81 int16_t adc_data[];
82} __attribute__((__packed__)) PCHANNEL;
83
84
85typedef struct {
86uint16_t package_crc;
87uint16_t end_package_flag;
88} __attribute__((__packed__)) PEVNT_FOOTER;
89
90#define NBOARDS 40 // max. number of boards
91#define NPIX 1440 // max. number of pixels
92#define NTMARK 160 // max. number of timeMarker signals
93#define MAX_SOCK 280 // NBOARDS * 7
94
95
96typedef union {
97 uint8_t B[8] ; //8 bytes
98 uint16_t S[4] ; //4 short
99 uint32_t I[2] ; //2 int
100 uint64_t L ; //1 long
101} L_WORD ;
102
103typedef union {
104 uint8_t B[4] ; //4 bytes
105 uint16_t S[2] ; //2 short
106 uint32_t I ; //1 int
107} I_WORD ;
108
109
110//---------------------------------------------------------------
111//
112// Data structures
113//
114//---------------------------------------------------------------
115
116typedef struct {
117 uint16_t Roi ; // #slices per pixel (same for all pixels and tmarks)
118 uint32_t EventNum ; // EventNumber as from FTM
119 uint16_t TriggerType ; // Trigger Type from FTM
120
121 uint32_t SoftTrig ; // SoftTrigger Info (TBD)
122 uint32_t PCTime ; // when did event start to arrive at PC
123
124 uint32_t BoardTime[NBOARDS];//
125
126 int16_t StartPix[NPIX]; // First Channel per Pixel (Pixels sorted according Software ID) ; -1 if not filled
127
128 int16_t StartTM[NTMARK]; // First Channel for TimeMark (sorted Hardware ID) ; -1 if not filled
129
130 int16_t Adc_Data[]; // final length defined by malloc ....
131
132} __attribute__((__packed__)) EVENT ;
133
134
135
136//---------------------------------------------------------------
137
138
139
140
141typedef struct {
142 uint32_t Version ;
143 uint32_t RunType ;
144 uint16_t NBoard ;
145 uint16_t NPix ;
146 uint16_t NTm ;
147 uint16_t Nroi ;
148
149//headers of all FAD-boards for first event ==> all FAD configs
150 PEVNT_HEADER *FADhead; // [ NBoards ] sorted Board Headers (according Hardware ID)
151
152//do we also have info about FTM config we want to add here ???
153} __attribute__((__packed__)) RUN_HEAD ;
154
155
156//---------------------------------------------------------------
157
158
159typedef struct {
160 uint32_t nEventsOk ; //how many events were written
161 uint32_t nEventsRej; //how many events were rejected by SW-trig
162 uint32_t nEventsBad; //how many events were rejected by Error
163
164 uint32_t PCtime0 ; //time when first event received
165 uint32_t PCtimeX ; //time when last event received
166
167
168//probably more to come ...
169} __attribute__((__packed__)) RUN_TAIL ;
170
171
172
173//---------------------------------------------------------------
174
175#define MAX_RUN 256
176#define MAX_EVT 32768 //don't worry, for events is MAX_RUN*MAX_EVT
177
178typedef void* FileHandle_t ;
179
180typedef struct {
181 uint32_t runId ; //run number
182 uint32_t lastTime ; //time when last event written so far
183 uint32_t closeTime ; //time when run should be closed
184 uint32_t maxEvt ; //maximum number of events to write
185 uint32_t actEvt ; //actual number of events written so far
186 uint32_t lastEvt ; //last event of this run read so far
187 uint32_t nextEvt ; //next event number to be written
188 uint32_t waitEvt ; //event that would be ready to be written
189 int32_t fileId ; //<0 never opened, 0=open, >0 closed
190 FileHandle_t fileHd ; //fileHandle (NULL if not open)
191 int16_t ctrlId[MAX_EVT] ; //index to buffId (sorted list; -1 =end)
192 uint16_t buffId[MAX_EVT] ; //index to mBuffer(buffered raw data)
193} RUN_CTRL ;
194
195
196
197//---------------------------------------------------------------
198
199
200typedef struct {
201 int32_t evNum ;
202 uint32_t runNum ;
203 int32_t fadLen ;
204 int32_t nBoard ;
205 int16_t board[ NBOARDS ];
206 int32_t nRoi ;
207 uint32_t pcTime ;
208 int32_t evtLen ;
209 EVENT *fEvent ;
210 PEVNT_HEADER *FADhead; //
211
212} WRK_DATA ; //internal to eventbuilder
213
214
215//---------------------------------------------------------------
216
217
218typedef struct {
219 int frstPtr ; //first used index
220 int lastPtr ; //last used index
221 int evtBuf[MAX_EVT*MAX_RUN] ; //index of event in mBuffer
222 int evtStat[MAX_EVT*MAX_RUN] ; //status of event:
223 // -1=empty
224 // 1..NBoards reading #Boards
225 // 90-99 : end reading
226 //128-255: processing
227 //256-
228 //201=start processing
229 //299=end processing
230 //901=start writing
231 //999=finished writing
232 //(TO BE REVISED)
233
234 int pcTime[MAX_EVT*MAX_RUN] ; //time when last action happened
235} EVT_CTRL ; //internal to eventbuilder
236
237//---------------------------------------------------------------
238
239
240typedef struct {
241 struct sockaddr_in sockAddr ;
242 int sockDef ; //<0 not defined/ ==0 not to be used/ >0 used
243} FACT_SOCK ; //internal to eventbuilder
244
245
246
247//---------------------------------------------------------------
248
249typedef struct {
250
251 //some info about what happened since start of program (or last 'reset')
252 uint32_t reset ; //#if increased, reset all counters
253 uint32_t numRead[MAX_SOCK] ; //how often succesfull read from N sockets per loop
254
255 uint64_t gotByte[NBOARDS] ; //#Bytes read per Board
256 uint32_t gotErr[NBOARDS] ; //#Communication Errors per Board
257 uint32_t evtGet; //#new Start of Events read
258 uint32_t evtTot; //#complete Events read
259 uint32_t evtErr; //#Events with Errors
260 uint32_t evtSkp; //#Events incomplete (timeout)
261
262 uint32_t procTot; //#Events processed
263 uint32_t procErr; //#Events showed problem in processing
264 uint32_t procTrg; //#Events accepted by SW trigger
265 uint32_t procSkp; //#Events rejected by SW trigger
266
267 uint32_t feedTot; //#Events used for feedBack system
268 uint32_t feedErr; //#Events rejected by feedBack
269
270 uint32_t wrtTot; //#Events written to disk
271 uint32_t wrtErr; //#Events with write-error
272
273 uint32_t runOpen; //#Runs opened
274 uint32_t runClose; //#Runs closed
275 uint32_t runErr; //#Runs with open/close errors
276
277
278 //info about current connection status
279 uint8_t numConn[NBOARDS] ; //#Sockets succesfully open per board
280
281} __attribute__((__packed__)) EVT_STAT ; //EventBuilder Status
282
283typedef struct {
284 //info about status of the main threads
285 int32_t readStat ; //read thread
286 int32_t procStat ; //processing thread(s)
287 int32_t writStat ; //write thread
288
289 //info about (current state of) the buffer
290 int32_t bufNew ; //# incomplete events in buffer
291 int32_t bufEvt ; //# complete events in buffer
292 uint64_t totMem; //# Bytes available in Buffer
293 uint64_t usdMem; //# Bytes currently used
294 uint64_t xxxMem; //max # Bytes ever used **
295 uint64_t maxMem; //max # Bytes used during past cycle
296
297 //counters
298 int32_t evtSkip ; //# incomplete Events skipped (timeout)
299 int32_t evtWrite ; //# Events written (or flushed if noWrite)
300 int32_t evtErr ; //# Events with errors
301
302 //rates
303 int32_t deltaT ; //time in milli-seconds for rates
304 int32_t rateNew ; //#New start events recieved
305 int32_t rateWrite ; //#Complete events written (or flushed)
306
307 //connections
308 int8_t numConn[NBOARDS] ; //#connections per board (at the moment)
309 int32_t errConn[NBOARDS] ; //#I/O errors per board (counter)
310 int32_t rateBytes[NBOARDS]; //#Bytes read this cycle **
311 int64_t totBytes[NBOARDS]; //#Bytes read (counter)
312
313
314 // ** // if counter and rates exist, do only update the rates in
315 // ** // real time;
316 // ** // counters will be updated only once per cycle based on rates
317
318} __attribute__((__packed__)) GUI_STAT ; //EventBuilder Status
319
320#endif
Note: See TracBrowser for help on using the repository browser.