source: trunk/FACT++/src/FAD.h@ 15458

Last change on this file since 15458 was 15415, checked in by tbretz, 12 years ago
Added a second array element to pcTime to allow saving of start time and fraction.
File size: 11.3 KB
Line 
1#ifndef FACT_FAD_H
2#define FACT_FAD_H
3
4//---------------------------------------------------------------
5//
6// FAD internal structures
7//
8//---------------------------------------------------------------
9
10 //
11// Other definitions
12//
13#define MAX_ADDR 0xFF // highest address in Config-RAM
14#define BADDR_ROI 0x00 // Baseaddress ROI-Values
15#define BADDR_DAC 0x24 // Baseaddress DAC-Values
16#define BADDR_CONT_TRIGGER_TIME 0x2C // Baseaddress for the continouus trigger timing.
17#define ADDR_RUNNUMBER 0x2D //
18#define MAX_VAL 65535
19#define MAX_ROIVAL 1024
20#define MAX_DACVAL 65535
21
22#define NChannels 9
23#define NBins 1024
24#define NChips 4
25#define NTemp 4
26#define NDAC 8
27
28//
29// Data structures
30//
31
32typedef struct{
33 int hardID ; //hardware ID
34 int pos_i ; //geometrical positon row
35 int pos_j ; // column
36 int G_APD ; //G-APD identifier
37 double V_op ; //operation voltage
38 int HV_B ; //HV Board
39 int HV_C ; //HV Channel
40 double pos_X ; //geometrical position in pixel units
41 double pos_Y ; //
42} PIX_MAP ;
43
44
45typedef struct {
46
47 uint16_t start_package_flag;
48 uint16_t package_length;
49 uint16_t version_no;
50 uint16_t PLLLCK;
51
52 uint16_t trigger_crc;
53 uint16_t trigger_type;
54 uint32_t trigger_id;
55
56 uint32_t fad_evt_counter;
57 uint32_t REFCLK_frequency;
58
59 uint16_t board_id;
60 uint8_t zeroes;
61 int8_t adc_clock_phase_shift;
62 uint16_t number_of_triggers_to_generate;
63 uint16_t trigger_generator_prescaler;
64
65 uint64_t DNA;
66
67 uint32_t time;
68 uint32_t runnumber;
69
70 int16_t drs_temperature[NTemp];
71
72 uint16_t dac[NDAC];
73
74} __attribute__((__packed__)) PEVNT_HEADER;
75
76typedef struct {
77uint16_t id;
78uint16_t start_cell;
79uint16_t roi;
80uint16_t filling;
81 int16_t adc_data[];
82} __attribute__((__packed__)) PCHANNEL;
83
84
85typedef struct {
86uint16_t package_crc;
87uint16_t end_package_flag;
88} __attribute__((__packed__)) PEVNT_FOOTER;
89
90#define NBOARDS 40 // max. number of boards
91#define NPIX 1440 // max. number of pixels
92#define NTMARK 160 // max. number of timeMarker signals
93#define MAX_SOCK 280 // NBOARDS * 7
94
95
96typedef union {
97 uint8_t B[8] ; //8 bytes
98 uint16_t S[4] ; //4 short
99 uint32_t I[2] ; //2 int
100 uint64_t L ; //1 long
101} L_WORD ;
102
103typedef union {
104 uint8_t B[4] ; //4 bytes
105 uint16_t S[2] ; //2 short
106 uint32_t I ; //1 int
107} I_WORD ;
108
109
110//---------------------------------------------------------------
111//
112// Data structures
113//
114//---------------------------------------------------------------
115
116typedef struct _EVENT {
117 uint16_t Roi ; // #slices per pixel (same for all pixels)
118 uint16_t RoiTM ; // #slices per pixel (same for all tmarks) [ 0 or Roi ]
119 uint32_t EventNum ; // EventNumber as from FADs
120 uint32_t TriggerNum ; // EventNumber as from FTM
121 uint16_t TriggerType ; // Trigger Type from FTM
122
123 uint32_t NumBoards ; // number of active boards included
124 uint8_t Errors[4] ; // indicator for mismatches
125
126 uint32_t SoftTrig ; // SoftTrigger Info (TBD)
127 uint32_t PCTime ; // epoch
128 uint32_t PCUsec ; // micro-seconds
129
130 uint32_t BoardTime[NBOARDS];//
131
132 int16_t StartPix[NPIX]; // First Channel per Pixel (Pixels sorted according Software ID) ; -1 if not filled
133
134 int16_t StartTM[NTMARK]; // First Channel for TimeMark (sorted Hardware ID) ; -1 if not filled
135
136 int16_t Adc_Data[]; // final length defined by malloc ....
137
138} __attribute__((__packed__)) EVENT ;
139
140
141
142//---------------------------------------------------------------
143
144typedef struct _RUN_HEAD {
145 uint32_t Version ;
146 uint32_t RunType ;
147 uint32_t RunTime ; //unix epoch for first event
148 uint32_t RunUsec ; //microseconds
149 uint16_t NBoard ; //#boards (always 40)
150 uint16_t NPix ; //#pixels (always 1440)
151 uint16_t NTm ; //#TM (always 160)
152 uint16_t Nroi ; //roi for pixels
153 uint16_t NroiTM ; //roi for TM <=0 if TM is empty
154
155//headers of all FAD-boards for first event ==> all FAD configs
156 PEVNT_HEADER *FADhead; // [ NBoards ] sorted Board Headers (according Hardware ID)
157
158//do we also have info about FTM config we want to add here ???
159} __attribute__((__packed__)) RUN_HEAD ;
160
161
162//---------------------------------------------------------------
163
164
165typedef struct _RUN_TAIL {
166 uint32_t nEventsOk ; //how many events were written
167 uint32_t nEventsRej; //how many events were rejected by SW-trig
168 uint32_t nEventsBad; //how many events were rejected by Error
169
170 uint32_t PCtime0 ; //time when first event received
171 uint32_t PCtimeX ; //time when last event received
172
173
174//probably more to come ...
175} __attribute__((__packed__)) RUN_TAIL ;
176
177
178
179//---------------------------------------------------------------
180
181#define MAX_RUN 8
182#define MAX_EVT 32768 //don't worry, for events is MAX_RUN*MAX_EVT
183
184typedef void* FileHandle_t ;
185
186typedef struct {
187 uint32_t runId ; //run number
188 uint32_t firstTime ; //epoch of first event received
189 uint32_t firstUsec ; //epoch of first event received
190 uint32_t lastTime ; //time when last event written so far
191 uint32_t closeTime ; //time when run should be closed
192 uint32_t maxEvt ; //maximum number of events to write
193 uint32_t actEvt ; //actual number of events written so far
194 uint32_t procEvt ; //actual number of events processed so far
195 int32_t lastEvt ; //last event of this run read so far
196 uint32_t nextEvt ; //next event number to be written
197 uint32_t waitEvt ; //event that would be ready to be written
198 int16_t fileId ; //<0 never opened, 0=open, >0 closed
199 int16_t procId ; //processing <0 never opened, 0=open, >0 closed
200 int16_t roi0 ; //roi for normal pixels
201 int16_t roi8 ; //roi for pixels8
202
203 FileHandle_t fileHd ; //fileHandle (NULL if not open)
204// int16_t ctrlId[MAX_EVT] ; //index to buffId (sorted list; -1 =end)
205// uint16_t buffId[MAX_EVT] ; //index to mBuffer(buffered raw data)
206} RUN_CTRL ;
207
208
209
210//---------------------------------------------------------------
211
212
213typedef struct {
214 int32_t evNum ;
215 int32_t fadNum ;
216 int32_t trgNum ;
217 int32_t trgTyp ;
218 uint32_t runNum ;
219 int32_t fadLen ;
220 int32_t nBoard ;
221 int16_t board[ NBOARDS ];
222 int16_t nRoi ;
223 int16_t nRoiTM ;
224 uint32_t pcTime[2] ;
225 int32_t evtLen ;
226 uint8_t Errors[4] ;
227 EVENT *fEvent ;
228 PEVNT_HEADER *FADhead; //
229 int8_t *buffer ;
230
231} WRK_DATA ; //internal to eventbuilder
232
233
234//---------------------------------------------------------------
235
236
237typedef struct {
238 int frstPtr ; //first used index
239 int lastPtr ; //last used index
240 int evtBuf[MAX_EVT*MAX_RUN] ; //index of event in mBuffer
241 int evtStat[MAX_EVT*MAX_RUN] ; //status of event:
242 // -1=empty
243 // 1..NBoards reading #Boards
244 // 90-99 : end reading
245 //128-255: processing
246 //256-
247 //201=start processing
248 //299=end processing
249 //901=start writing
250 //999=finished writing
251 //(TO BE REVISED)
252
253 uint32_t pcTime[MAX_EVT*MAX_RUN] ; //time when last action happened
254} EVT_CTRL ; //internal to eventbuilder
255
256//---------------------------------------------------------------
257
258// FIXME: This doesn't neet to be here... it is inlcuded in all
259// data processors
260
261#include <netinet/in.h>
262
263typedef struct {
264 struct sockaddr_in sockAddr ;
265 int sockDef ; //<0 not defined/ ==0 not to be used/ >0 used
266} FACT_SOCK ; //internal to eventbuilder
267
268
269//---------------------------------------------------------------
270
271typedef struct {
272
273 //some info about what happened since start of program (or last 'reset')
274 uint32_t reset ; //#if increased, reset all counters
275 uint32_t numRead[MAX_SOCK] ; //how often succesfull read from N sockets per loop
276
277 uint64_t gotByte[NBOARDS] ; //#Bytes read per Board
278 uint32_t gotErr[NBOARDS] ; //#Communication Errors per Board
279 uint32_t evtGet; //#new Start of Events read
280 uint32_t evtTot; //#complete Events read
281 uint32_t evtErr; //#Events with Errors
282 uint32_t evtSkp; //#Events incomplete (timeout)
283
284 uint32_t procTot; //#Events processed
285 uint32_t procErr; //#Events showed problem in processing
286 uint32_t procTrg; //#Events accepted by SW trigger
287 uint32_t procSkp; //#Events rejected by SW trigger
288
289 uint32_t feedTot; //#Events used for feedBack system
290 uint32_t feedErr; //#Events rejected by feedBack
291
292 uint32_t wrtTot; //#Events written to disk
293 uint32_t wrtErr; //#Events with write-error
294
295 uint32_t runOpen; //#Runs opened
296 uint32_t runClose; //#Runs closed
297 uint32_t runErr; //#Runs with open/close errors
298
299
300 //info about current connection status
301 uint8_t numConn[NBOARDS] ; //#Sockets succesfully open per board
302
303} __attribute__((__packed__)) EVT_STAT ; //EventBuilder Status
304
305typedef struct {
306 //info about status of the main threads
307 int32_t readStat ; //read thread
308 int32_t procStat ; //processing thread(s)
309 int32_t writStat ; //write thread
310
311 //info about (current state of) the buffer
312 int32_t bufNew ; //# incomplete events in buffer
313 int32_t bufEvt ; //# complete events in buffer
314 int32_t bufTot ; //# total events currently in buffer
315 int32_t maxEvt ; //# maximum events in buffer past cycle
316 int32_t xxxEvt ; //# maximum events ever in buffer
317 uint64_t totMem; //# Bytes available in Buffer
318 uint64_t usdMem; //# Bytes currently used
319 uint64_t xxxMem; //max # Bytes ever used **
320 uint64_t maxMem; //max # Bytes used during past cycle
321
322 //counters
323 int32_t evtSkip ; //# incomplete Events skipped (timeout)
324 int32_t evtWrite ; //# Events written (or flushed if noWrite)
325 int32_t evtErr ; //# Events with errors
326 int32_t badRoiE; //# boards with wrong roi (inconsistent in event)
327 int32_t badRoiR; //# boards with wrong roi (inconsistent in run)
328 int32_t badRoiB; //# boards with wrong roi (inconsistent in board)
329 int32_t badRoi[NBOARDS]; //# boards with wrong roi
330
331 //rates
332 int32_t deltaT ; //time in milli-seconds for rates
333 int32_t rateNew ; //#New start events recieved
334 int32_t rateWrite ; //#Complete events written (or flushed)
335
336 //connections
337 int8_t numConn[NBOARDS] ; //#connections per board (at the moment)
338 //int32_t errConn[NBOARDS] ; //#I/O errors per board (counter)
339 int32_t rateBytes[NBOARDS]; //#Bytes read this cycle **
340 int64_t totBytes[NBOARDS]; //#Bytes read (counter)
341
342
343 // ** // if counter and rates exist, do only update the rates in
344 // ** // real time;
345 // ** // counters will be updated only once per cycle based on rates
346
347} __attribute__((__packed__)) GUI_STAT ; //EventBuilder Status
348
349#endif
Note: See TracBrowser for help on using the repository browser.