# Generated automatically from Makefile.in by config.pl. # KDE tags expanded automatically by am_edit - $Revision: 1.2 $ # Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. ####### kdevelop will overwrite this part!!! (begin)########## SHELL = /bin/sh srcdir = . top_srcdir = . VPATH = . prefix = /opt/kde2 exec_prefix = ${prefix} #>- bindir = ${exec_prefix}/bin #>+ 3 DEPDIR = .deps bindir = ${exec_prefix}/bin sbindir = ${exec_prefix}/sbin libexecdir = ${exec_prefix}/libexec datadir = ${prefix}/share sysconfdir = ${prefix}/etc sharedstatedir = ${prefix}/com localstatedir = ${prefix}/var libdir = ${exec_prefix}/lib infodir = ${prefix}/info mandir = ${prefix}/man includedir = ${prefix}/include oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/activemirrorcontrol pkglibdir = $(libdir)/activemirrorcontrol pkgincludedir = $(includedir)/activemirrorcontrol top_builddir = . ACLOCAL = aclocal AUTOCONF = autoconf AUTOMAKE = automake AUTOHEADER = autoheader INSTALL = /usr/bin/ginstall -c -p INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG) $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = ${INSTALL} -m 644 INSTALL_SCRIPT = ${INSTALL} transform = s,x,x, NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = i686-pc-linux-gnu build_triplet = i686-pc-linux-gnu host_alias = i686-pc-linux-gnu host_triplet = i686-pc-linux-gnu target_alias = i686-pc-linux-gnu target_triplet = i686-pc-linux-gnu ARTSCCONFIG = /opt/kde2/bin/artsc-config AS = @AS@ AUTODIRS = CC = gcc CONF_FILES = $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in CPP = gcc -E CXX = g++ CXXCPP = g++ -E DCOPIDL = /opt/kde2/bin/dcopidl DCOPIDL2CPP = /opt/kde2/bin/dcopidl2cpp DCOP_DEPENDENCIES = $(DCOPIDL) DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = /usr/bin/msgfmt IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ KDB2HTML = /opt/kde2/bin/kdb2html KDECONFIG = /opt/kde2/bin/kde-config KDE_CXXFLAGS = KDE_EXTRA_RPATH = KDE_INCLUDES = -I/opt/kde2/include KDE_LDFLAGS = -L/opt/kde2/lib KDE_PLUGIN = -avoid-version -module -no-undefined KDE_RPATH = -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries) KDE_USE_CLOSURE_FALSE = # KDE_USE_CLOSURE_TRUE = KDE_USE_FINAL_FALSE = KDE_USE_FINAL_TRUE = # LIBCOMPAT = LIBCRYPT = -lcrypt LIBDL = -ldl LIBJPEG = -ljpeg LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = -lpng -lz -lm LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBSM = -lSM -lICE LIBSOCKET = LIBTIFF = @LIBTIFF@ LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBUCB = LIBZ = -lz LIB_KAB = -lkab LIB_KDECORE = -lkdecore LIB_KDEUI = -lkdeui LIB_KFILE = -lkfile LIB_KFM = LIB_KFORMULA = -lkformula LIB_KHTML = -lkhtml LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = -lkio LIB_KPARTS = -lkparts LIB_KSPELL = -lkspell LIB_KSYCOCA = -lksycoca LIB_KWRITE = -lkwrite LIB_QT = -lqt $(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM) LIB_SMB = -lsmb LIB_X11 = -lX11 $(LIBSOCKET) LN_S = ln -s MAKEINFO = makeinfo MCOPIDL = /opt/kde2/bin/mcopidl MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = /usr/lib/qt2/bin/moc MSGFMT = /usr/bin/msgfmt NOOPT_CXXFLAGS = -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -Wnon-virtual-dtor -fno-builtin -g2 -Wall -fexceptions -DQT_THREAD_SUPPORT NOREPO = -fno-repo OBJDUMP = @OBJDUMP@ OBJEXT = o PACKAGE = activemirrorcontrol PAMINC = @PAMINC@ PAMLIBPATHS = @PAMLIBPATHS@ PAMLIBS = @PAMLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QT_INCLUDES = -I/usr/lib/qt2/include QT_LDFLAGS = -L/usr/lib/qt2/lib RANLIB = ranlib REPO = -frepo STRIP = strip TOPSUBDIRS = activemirrorcontrol doc po UIC = /usr/lib/qt2/bin/uic USER_INCLUDES = USER_LDFLAGS = USE_EXCEPTIONS = -fexceptions USE_RTTI = -frtti USE_THREADS = @USE_THREADS@ VERSION = 0.1 XGETTEXT = /usr/bin/xgettext XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = X_INCLUDES = -I/usr/X11R6/include X_LDFLAGS = -L/usr/X11R6/lib X_PRE_LIBS = all_includes = -I/opt/kde2/include -I/usr/lib/qt2/include -I/usr/X11R6/include all_libraries = -L/usr/X11R6/lib -L/usr/lib/qt2/lib -L/opt/kde2/lib idldir = @idldir@ kde_appsdir = ${prefix}/share/applnk kde_bindir = ${exec_prefix}/bin kde_confdir = ${prefix}/share/config kde_datadir = ${prefix}/share/apps kde_htmldir = ${prefix}/share/doc/HTML kde_icondir = ${prefix}/share/icons kde_includes = /opt/kde2/include kde_libraries = /opt/kde2/lib kde_libs_htmldir = /opt/kde2/share/doc/HTML kde_libs_prefix = /opt/kde2 kde_locale = ${prefix}/share/locale kde_mimedir = ${prefix}/share/mimelnk kde_moduledir = ${prefix}/lib/kde2 kde_servicesdir = ${prefix}/share/services kde_servicetypesdir = ${prefix}/share/servicetypes kde_sounddir = ${prefix}/share/sounds kde_templatesdir = ${prefix}/share/templates kde_wallpaperdir = ${prefix}/share/wallpapers micodir = @micodir@ qt_includes = /usr/lib/qt2/include qt_libraries = /usr/lib/qt2/lib x_includes = /usr/X11R6/include x_libraries = /usr/X11R6/lib SUBDIRS = activemirrorcontrol po doc EXTRA_DIST = admin ####### kdevelop will overwrite this part!!! (end)############ # not a GNU package. You can remove this line, if # have all needed files, that a GNU package needs AUTOMAKE_OPTIONS = foreign MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = DIST_COMMON = ./stamp-h.in Makefile.am Makefile.in acinclude.m4 \ aclocal.m4 config.h.in configure configure.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=Makefile.dist activemirrorcontrol.kdevprj configure.in.in activemirrorcontrol.doxygen messages.log activemirrorcontrol.kdevses DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = tar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile cd $(top_srcdir) && perl admin/am_edit Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status $(ACLOCAL_M4): configure.in acinclude.m4 cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null $(srcdir)/config.h.in: $(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null mostlyclean-hdr: clean-hdr: distclean-hdr: -rm -f config.h maintainer-clean-hdr: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) dist -rm -rf $(distdir) @banner="$(distdir).tar.gz is ready for distribution"; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes" dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign ./Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive all-recursive-am: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile config.h all-redirect: all-recursive-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-tags clean-generic mostlyclean-am #>- clean: clean-recursive #>+ 1 clean: kde-rpo-clean clean-recursive distclean-am: distclean-hdr distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ install-data-recursive uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ install-exec-am install-exec install-data-am install-data install-am \ install uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean $(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; $(top_srcdir)/subdirs: cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs $(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 package-messages: $(MAKE) -f admin/Makefile.common package-messages $(MAKE) -C po merge dist-hook: cd $(top_distdir) && perl admin/am_edit -padmin cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile cd $(top_srcdir) && perl admin/am_edit Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 no-final: $(MAKE) all-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo