source: trunk/MagicSoft/AMC/activemirrorcontrol/admin/libtool.m4.in@ 9492

Last change on this file since 9492 was 3403, checked in by merck, 21 years ago
initial check-in of AMC software
File size: 29.3 KB
Line 
1## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
2## Copyright 1996, 1997, 1998, 1999, 2000, 2001
3## Free Software Foundation, Inc.
4## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
5##
6## This program is free software; you can redistribute it and/or modify
7## it under the terms of the GNU General Public License as published by
8## the Free Software Foundation; either version 2 of the License, or
9## (at your option) any later version.
10##
11## This program is distributed in the hope that it will be useful, but
12## WITHOUT ANY WARRANTY; without even the implied warranty of
13## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14## General Public License for more details.
15##
16## You should have received a copy of the GNU General Public License
17## along with this program; if not, write to the Free Software
18## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19##
20## As a special exception to the GNU General Public License, if you
21## distribute this file as part of a program that contains a
22## configuration script generated by Autoconf, you may include it under
23## the same distribution terms that you use for the rest of that program.
24
25# serial 46 AC_PROG_LIBTOOL
26AC_DEFUN([AC_PROG_LIBTOOL],
27[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
28dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
29dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
30 AC_PROVIDE_IFELSE([AC_PROG_CXX],
31 [AC_LIBTOOL_CXX],
32 [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
33])])
34
35dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
36dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
37dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
38 AC_PROVIDE_IFELSE([AC_PROG_GCJ],
39 [AC_LIBTOOL_GCJ],
40 [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
41 [AC_LIBTOOL_GCJ],
42 [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
43 [AC_LIBTOOL_GCJ],
44 [ifdef([AC_PROG_GCJ],
45 [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
46])])
47 ifdef([A][M_PROG_GCJ],
48 [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
49])])
50 ifdef([LT_AC_PROG_GCJ],
51 [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
52])])])])])])
53
54AC_DEFUN([_AC_PROG_LIBTOOL],
55[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
56AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
57AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
58
59# Save cache, so that ltconfig can load it
60AC_CACHE_SAVE
61
62# Actually configure libtool. ac_aux_dir is where install-sh is found.
63AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
64MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
65LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
66AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
67objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
68deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
69${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
70$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
71|| AC_MSG_ERROR([libtool configure failed])
72
73# Reload cache, that may have been modified by ltconfig
74AC_CACHE_LOAD
75
76# This can be used to rebuild libtool when needed
77LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
78
79# Always use our own libtool.
80LIBTOOL='$(SHELL) $(top_builddir)/libtool'
81AC_SUBST(LIBTOOL)dnl
82
83# Redirect the config.log output again, so that the ltconfig log is not
84# clobbered by the next message.
85exec 5>>./config.log
86])
87
88AC_DEFUN([AC_LIBTOOL_SETUP],
89[AC_PREREQ(2.13)dnl
90AC_REQUIRE([AC_ENABLE_SHARED])dnl
91AC_REQUIRE([AC_ENABLE_STATIC])dnl
92AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
93AC_REQUIRE([AC_CANONICAL_HOST])dnl
94AC_REQUIRE([AC_CANONICAL_BUILD])dnl
95AC_REQUIRE([AC_PROG_CC])dnl
96AC_REQUIRE([AC_PROG_LD])dnl
97AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
98AC_REQUIRE([AC_PROG_NM])dnl
99AC_REQUIRE([AC_PROG_LN_S])dnl
100AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
101# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
102AC_REQUIRE([AC_OBJEXT])dnl
103AC_REQUIRE([AC_EXEEXT])dnl
104dnl
105
106# Only perform the check for file, if the check method requires it
107case "$deplibs_check_method" in
108file_magic*)
109 if test "$file_magic_cmd" = '$MAGIC_CMD'; then
110 AC_PATH_MAGIC
111 fi
112 ;;
113esac
114
115AC_CHECK_TOOL(RANLIB, ranlib, :)
116AC_CHECK_TOOL(STRIP, strip, :)
117
118# Check for any special flags to pass to ltconfig.
119libtool_flags="--cache-file=$cache_file"
120test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
121test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
122test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
123test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
124test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
125ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
126[libtool_flags="$libtool_flags --enable-dlopen"])
127ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
128[libtool_flags="$libtool_flags --enable-win32-dll"])
129AC_ARG_ENABLE(libtool-lock,
130 [ --disable-libtool-lock avoid locking (might break parallel builds)])
131test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
132test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
133
134AC_ARG_WITH(pic,
135 [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
136 pic_mode="$withval", pic_mode=default)
137test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
138test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
139
140# Some flags need to be propagated to the compiler or linker for good
141# libtool support.
142case "$host" in
143*-*-irix6*)
144 # Find out which ABI we are using.
145 echo '[#]line __oline__ "configure"' > conftest.$ac_ext
146 if AC_TRY_EVAL(ac_compile); then
147 case "`/usr/bin/file conftest.$ac_objext`" in
148 *32-bit*)
149 LD="${LD-ld} -32"
150 ;;
151 *N32*)
152 LD="${LD-ld} -n32"
153 ;;
154 *64-bit*)
155 LD="${LD-ld} -64"
156 ;;
157 esac
158 fi
159 rm -rf conftest*
160 ;;
161
162*-*-sco3.2v5*)
163 # On SCO OpenServer 5, we need -belf to get full-featured binaries.
164 SAVE_CFLAGS="$CFLAGS"
165 CFLAGS="$CFLAGS -belf"
166 AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
167 [AC_LANG_SAVE
168 AC_LANG_C
169 AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
170 AC_LANG_RESTORE])
171 if test x"$lt_cv_cc_needs_belf" != x"yes"; then
172 # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
173 CFLAGS="$SAVE_CFLAGS"
174 fi
175 ;;
176
177ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
178[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
179 AC_CHECK_TOOL(DLLTOOL, dlltool, false)
180 AC_CHECK_TOOL(AS, as, false)
181 AC_CHECK_TOOL(OBJDUMP, objdump, false)
182
183 # recent cygwin and mingw systems supply a stub DllMain which the user
184 # can override, but on older systems we have to supply one
185 AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
186 [AC_TRY_LINK([],
187 [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
188 DllMain (0, 0, 0);],
189 [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
190
191 case "$host/$CC" in
192 *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
193 # old mingw systems require "-dll" to link a DLL, while more recent ones
194 # require "-mdll"
195 SAVE_CFLAGS="$CFLAGS"
196 CFLAGS="$CFLAGS -mdll"
197 AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
198 [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
199 CFLAGS="$SAVE_CFLAGS" ;;
200 *-*-cygwin* | *-*-pw32*)
201 # cygwin systems need to pass --dll to the linker, and not link
202 # crt.o which will require a WinMain@16 definition.
203 lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
204 esac
205 ;;
206 ])
207esac
208])
209
210# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
211AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
212
213# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
214AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
215
216# AC_ENABLE_SHARED - implement the --enable-shared flag
217# Usage: AC_ENABLE_SHARED[(DEFAULT)]
218# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
219# `yes'.
220AC_DEFUN([AC_ENABLE_SHARED],
221[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
222AC_ARG_ENABLE(shared,
223changequote(<<, >>)dnl
224<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
225changequote([, ])dnl
226[p=${PACKAGE-default}
227case "$enableval" in
228yes) enable_shared=yes ;;
229no) enable_shared=no ;;
230*)
231 enable_shared=no
232 # Look at the argument we got. We use all the common list separators.
233 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
234 for pkg in $enableval; do
235 if test "X$pkg" = "X$p"; then
236 enable_shared=yes
237 fi
238 done
239 IFS="$ac_save_ifs"
240 ;;
241esac],
242enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
243])
244
245# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
246AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
247AC_ENABLE_SHARED(no)])
248
249# AC_ENABLE_STATIC - implement the --enable-static flag
250# Usage: AC_ENABLE_STATIC[(DEFAULT)]
251# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
252# `yes'.
253AC_DEFUN([AC_ENABLE_STATIC],
254[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
255AC_ARG_ENABLE(static,
256changequote(<<, >>)dnl
257<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
258changequote([, ])dnl
259[p=${PACKAGE-default}
260case "$enableval" in
261yes) enable_static=yes ;;
262no) enable_static=no ;;
263*)
264 enable_static=no
265 # Look at the argument we got. We use all the common list separators.
266 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
267 for pkg in $enableval; do
268 if test "X$pkg" = "X$p"; then
269 enable_static=yes
270 fi
271 done
272 IFS="$ac_save_ifs"
273 ;;
274esac],
275enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
276])
277
278# AC_DISABLE_STATIC - set the default static flag to --disable-static
279AC_DEFUN([AC_DISABLE_STATIC],
280[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
281AC_ENABLE_STATIC(no)])
282
283
284# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
285# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
286# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
287# `yes'.
288AC_DEFUN([AC_ENABLE_FAST_INSTALL],
289[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
290AC_ARG_ENABLE(fast-install,
291changequote(<<, >>)dnl
292<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
293changequote([, ])dnl
294[p=${PACKAGE-default}
295case "$enableval" in
296yes) enable_fast_install=yes ;;
297no) enable_fast_install=no ;;
298*)
299 enable_fast_install=no
300 # Look at the argument we got. We use all the common list separators.
301 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
302 for pkg in $enableval; do
303 if test "X$pkg" = "X$p"; then
304 enable_fast_install=yes
305 fi
306 done
307 IFS="$ac_save_ifs"
308 ;;
309esac],
310enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
311])
312
313# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
314AC_DEFUN([AC_DISABLE_FAST_INSTALL],
315[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
316AC_ENABLE_FAST_INSTALL(no)])
317
318# AC_LIBTOOL_PICMODE - implement the --with-pic flag
319# Usage: AC_LIBTOOL_PICMODE[(MODE)]
320# Where MODE is either `yes' or `no'. If omitted, it defaults to
321# `both'.
322AC_DEFUN([AC_LIBTOOL_PICMODE],
323[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
324pic_mode=ifelse($#,1,$1,default)])
325
326
327# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
328AC_DEFUN([AC_PATH_TOOL_PREFIX],
329[AC_MSG_CHECKING([for $1])
330AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
331[case "$MAGIC_CMD" in
332 /*)
333 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
334 ;;
335 ?:/*)
336 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
337 ;;
338 *)
339 ac_save_MAGIC_CMD="$MAGIC_CMD"
340 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
341dnl $ac_dummy forces splitting on constant user-supplied paths.
342dnl POSIX.2 word splitting is done only on the output of word expansions,
343dnl not every word. This closes a longstanding sh security hole.
344 ac_dummy="ifelse([$2], , $PATH, [$2])"
345 for ac_dir in $ac_dummy; do
346 test -z "$ac_dir" && ac_dir=.
347 if test -f $ac_dir/$1; then
348 lt_cv_path_MAGIC_CMD="$ac_dir/$1"
349 if test -n "$file_magic_test_file"; then
350 case "$deplibs_check_method" in
351 "file_magic "*)
352 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
353 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
354 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
355 egrep "$file_magic_regex" > /dev/null; then
356 :
357 else
358 cat <<EOF 1>&2
359
360*** Warning: the command libtool uses to detect shared libraries,
361*** $file_magic_cmd, produces output that libtool cannot recognize.
362*** The result is that libtool may fail to recognize shared libraries
363*** as such. This will affect the creation of libtool libraries that
364*** depend on shared libraries, but programs linked with such libtool
365*** libraries will work regardless of this problem. Nevertheless, you
366*** may want to report the problem to your system manager and/or to
367*** bug-libtool@gnu.org
368
369EOF
370 fi ;;
371 esac
372 fi
373 break
374 fi
375 done
376 IFS="$ac_save_ifs"
377 MAGIC_CMD="$ac_save_MAGIC_CMD"
378 ;;
379esac])
380MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
381if test -n "$MAGIC_CMD"; then
382 AC_MSG_RESULT($MAGIC_CMD)
383else
384 AC_MSG_RESULT(no)
385fi
386])
387
388
389# AC_PATH_MAGIC - find a file program which can recognise a shared library
390AC_DEFUN([AC_PATH_MAGIC],
391[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
392AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
393if test -z "$lt_cv_path_MAGIC_CMD"; then
394 if test -n "$ac_tool_prefix"; then
395 AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
396 else
397 MAGIC_CMD=:
398 fi
399fi
400])
401
402
403# AC_PROG_LD - find the path to the GNU or non-GNU linker
404AC_DEFUN([AC_PROG_LD],
405[AC_ARG_WITH(gnu-ld,
406[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
407test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
408AC_REQUIRE([AC_PROG_CC])dnl
409AC_REQUIRE([AC_CANONICAL_HOST])dnl
410AC_REQUIRE([AC_CANONICAL_BUILD])dnl
411ac_prog=ld
412if test "$GCC" = yes; then
413 # Check if gcc -print-prog-name=ld gives a path.
414 AC_MSG_CHECKING([for ld used by GCC])
415 case $host in
416 *-*-mingw*)
417 # gcc leaves a trailing carriage return which upsets mingw
418 ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
419 *)
420 ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
421 esac
422 case "$ac_prog" in
423 # Accept absolute paths.
424changequote(,)dnl
425 [\\/]* | [A-Za-z]:[\\/]*)
426 re_direlt='/[^/][^/]*/\.\./'
427changequote([,])dnl
428 # Canonicalize the path of ld
429 ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
430 while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
431 ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
432 done
433 test -z "$LD" && LD="$ac_prog"
434 ;;
435 "")
436 # If it fails, then pretend we aren't using GCC.
437 ac_prog=ld
438 ;;
439 *)
440 # If it is relative, then search for the first ld in PATH.
441 with_gnu_ld=unknown
442 ;;
443 esac
444elif test "$with_gnu_ld" = yes; then
445 AC_MSG_CHECKING([for GNU ld])
446else
447 AC_MSG_CHECKING([for non-GNU ld])
448fi
449AC_CACHE_VAL(lt_cv_path_LD,
450[if test -z "$LD"; then
451 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
452 for ac_dir in $PATH; do
453 test -z "$ac_dir" && ac_dir=.
454 if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
455 lt_cv_path_LD="$ac_dir/$ac_prog"
456 # Check to see if the program is GNU ld. I'd rather use --version,
457 # but apparently some GNU ld's only accept -v.
458 # Break only if it was the GNU/non-GNU ld that we prefer.
459 if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
460 test "$with_gnu_ld" != no && break
461 else
462 test "$with_gnu_ld" != yes && break
463 fi
464 fi
465 done
466 IFS="$ac_save_ifs"
467else
468 lt_cv_path_LD="$LD" # Let the user override the test with a path.
469fi])
470LD="$lt_cv_path_LD"
471if test -n "$LD"; then
472 AC_MSG_RESULT($LD)
473else
474 AC_MSG_RESULT(no)
475fi
476test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
477AC_PROG_LD_GNU
478])
479
480AC_DEFUN([AC_PROG_LD_GNU],
481[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
482[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
483if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
484 lt_cv_prog_gnu_ld=yes
485else
486 lt_cv_prog_gnu_ld=no
487fi])
488with_gnu_ld=$lt_cv_prog_gnu_ld
489])
490
491# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
492# -- PORTME Some linkers may need a different reload flag.
493AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
494[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
495[lt_cv_ld_reload_flag='-r'])
496reload_flag=$lt_cv_ld_reload_flag
497test -n "$reload_flag" && reload_flag=" $reload_flag"
498])
499
500# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
501# -- PORTME fill in with the dynamic library characteristics
502AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
503[AC_CACHE_CHECK([how to recognise dependant libraries],
504lt_cv_deplibs_check_method,
505[lt_cv_file_magic_cmd='$MAGIC_CMD'
506lt_cv_file_magic_test_file=
507lt_cv_deplibs_check_method='unknown'
508# Need to set the preceding variable on all platforms that support
509# interlibrary dependencies.
510# 'none' -- dependencies not supported.
511# `unknown' -- same as none, but documents that we really don't know.
512# 'pass_all' -- all dependencies passed with no checks.
513# 'test_compile' -- check by making test program.
514# 'file_magic [regex]' -- check by looking for files in library path
515# which responds to the $file_magic_cmd with a given egrep regex.
516# If you have `file' or equivalent on your system and you're not sure
517# whether `pass_all' will *always* work, you probably want this one.
518
519case "$host_os" in
520aix4*)
521 lt_cv_deplibs_check_method=pass_all
522 ;;
523
524beos*)
525 lt_cv_deplibs_check_method=pass_all
526 ;;
527
528bsdi4*)
529 changequote(,)dnl
530 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
531 changequote([, ])dnl
532 lt_cv_file_magic_cmd='/usr/bin/file -L'
533 lt_cv_file_magic_test_file=/shlib/libc.so
534 ;;
535
536cygwin* | mingw* |pw32*)
537 lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
538 lt_cv_file_magic_cmd='$OBJDUMP -f'
539 ;;
540
541darwin* | rhapsody*)
542 lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
543 lt_cv_file_magic_cmd=/usr/bin/file
544 lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
545 ;;
546
547freebsd* )
548 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
549 case "$host_cpu" in
550 i*86 )
551 # Not sure whether the presence of OpenBSD here was a mistake.
552 # Let's accept both of them until this is cleared up.
553 changequote(,)dnl
554 lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
555 changequote([, ])dnl
556 lt_cv_file_magic_cmd=/usr/bin/file
557 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
558 ;;
559 esac
560 else
561 lt_cv_deplibs_check_method=pass_all
562 fi
563 ;;
564
565gnu*)
566 lt_cv_deplibs_check_method=pass_all
567 ;;
568
569hpux10.20*|hpux11*)
570 # TODO: Does this work for hpux-11 too?
571 changequote(,)dnl
572 lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
573 changequote([, ])dnl
574 lt_cv_file_magic_cmd=/usr/bin/file
575 lt_cv_file_magic_test_file=/usr/lib/libc.sl
576 ;;
577
578irix5* | irix6*)
579 case "$host_os" in
580 irix5*)
581 # this will be overridden with pass_all, but let us keep it just in case
582 lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
583 ;;
584 *)
585 case "$LD" in
586 *-32|*"-32 ") libmagic=32-bit;;
587 *-n32|*"-n32 ") libmagic=N32;;
588 *-64|*"-64 ") libmagic=64-bit;;
589 *) libmagic=never-match;;
590 esac
591 # this will be overridden with pass_all, but let us keep it just in case
592 changequote(,)dnl
593 lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
594 changequote([, ])dnl
595 ;;
596 esac
597 lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
598 lt_cv_deplibs_check_method=pass_all
599 ;;
600
601# This must be Linux ELF.
602linux-gnu*)
603 case "$host_cpu" in
604 alpha* | i*86 | powerpc* | sparc* | ia64* | s390* )
605 lt_cv_deplibs_check_method=pass_all ;;
606 *)
607 # glibc up to 2.1.1 does not perform some relocations on ARM
608 changequote(,)dnl
609 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
610 changequote([, ])dnl
611 esac
612 lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
613 ;;
614
615netbsd*)
616 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
617 [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
618 else
619 [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
620 fi
621 lt_cv_file_magic_cmd='/usr/bin/file -L'
622 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
623 ;;
624
625openbsd* )
626 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
627 case "$host_cpu" in
628 i*86 )
629 changequote(,)dnl
630 lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
631 changequote([, ])dnl
632 lt_cv_file_magic_cmd=/usr/bin/file
633 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
634 ;;
635 esac
636 else
637 lt_cv_deplibs_check_method=pass_all
638 fi
639 ;;
640
641newsos6)
642 [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
643 lt_cv_file_magic_cmd=/usr/bin/file
644 lt_cv_file_magic_test_file=/usr/lib/libnls.so
645 ;;
646
647osf3* | osf4* | osf5*)
648 # this will be overridden with pass_all, but let us keep it just in case
649 lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
650 lt_cv_file_magic_test_file=/shlib/libc.so
651 lt_cv_deplibs_check_method=pass_all
652 ;;
653
654sco3.2v5*)
655 lt_cv_deplibs_check_method=pass_all
656 ;;
657
658solaris*)
659 lt_cv_deplibs_check_method=pass_all
660 lt_cv_file_magic_test_file=/lib/libc.so
661 ;;
662
663sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
664 case "$host_vendor" in
665 ncr)
666 lt_cv_deplibs_check_method=pass_all
667 ;;
668 motorola)
669 changequote(,)dnl
670 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
671 changequote([, ])dnl
672 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
673 ;;
674 esac
675 ;;
676esac
677])
678file_magic_cmd=$lt_cv_file_magic_cmd
679deplibs_check_method=$lt_cv_deplibs_check_method
680])
681
682
683# AC_PROG_NM - find the path to a BSD-compatible name lister
684AC_DEFUN([AC_PROG_NM],
685[AC_MSG_CHECKING([for BSD-compatible nm])
686AC_CACHE_VAL(lt_cv_path_NM,
687[if test -n "$NM"; then
688 # Let the user override the test.
689 lt_cv_path_NM="$NM"
690else
691 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
692 for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
693 test -z "$ac_dir" && ac_dir=.
694 tmp_nm=$ac_dir/${ac_tool_prefix}nm
695 if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
696 # Check to see if the nm accepts a BSD-compat flag.
697 # Adding the `sed 1q' prevents false positives on HP-UX, which says:
698 # nm: unknown option "B" ignored
699 # Tru64's nm complains that /dev/null is an invalid object file
700 if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
701 lt_cv_path_NM="$tmp_nm -B"
702 break
703 elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
704 lt_cv_path_NM="$tmp_nm -p"
705 break
706 else
707 lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
708 continue # so that we can try to find one that supports BSD flags
709 fi
710 fi
711 done
712 IFS="$ac_save_ifs"
713 test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
714fi])
715NM="$lt_cv_path_NM"
716AC_MSG_RESULT([$NM])
717])
718
719# AC_CHECK_LIBM - check for math library
720AC_DEFUN([AC_CHECK_LIBM],
721[AC_REQUIRE([AC_CANONICAL_HOST])dnl
722LIBM=
723case "$host" in
724*-*-beos* | *-*-cygwin* | *-*-pw32*)
725 # These system don't have libm
726 ;;
727*-ncr-sysv4.3*)
728 AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
729 AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
730 ;;
731*)
732 AC_CHECK_LIB(m, main, LIBM="-lm")
733 ;;
734esac
735])
736
737# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
738# the libltdl convenience library and INCLTDL to the include flags for
739# the libltdl header and adds --enable-ltdl-convenience to the
740# configure arguments. Note that LIBLTDL and INCLTDL are not
741# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
742# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
743# with '${top_builddir}/' and INCLTDL will be prefixed with
744# '${top_srcdir}/' (note the single quotes!). If your package is not
745# flat and you're not using automake, define top_builddir and
746# top_srcdir appropriately in the Makefiles.
747AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
748[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
749 case "$enable_ltdl_convenience" in
750 no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
751 "") enable_ltdl_convenience=yes
752 ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
753 esac
754 LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
755 INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
756])
757
758# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
759# the libltdl installable library and INCLTDL to the include flags for
760# the libltdl header and adds --enable-ltdl-install to the configure
761# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
762# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
763# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
764# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
765# with '${top_srcdir}/' (note the single quotes!). If your package is
766# not flat and you're not using automake, define top_builddir and
767# top_srcdir appropriately in the Makefiles.
768# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
769AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
770[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
771 AC_CHECK_LIB(ltdl, main,
772 [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
773 [if test x"$enable_ltdl_install" = xno; then
774 AC_MSG_WARN([libltdl not installed, but installation disabled])
775 else
776 enable_ltdl_install=yes
777 fi
778 ])
779 if test x"$enable_ltdl_install" = x"yes"; then
780 ac_configure_args="$ac_configure_args --enable-ltdl-install"
781 LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
782 INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
783 else
784 ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
785 LIBLTDL="-lltdl"
786 INCLTDL=
787 fi
788])
789
790# If this macro is not defined by Autoconf, define it here.
791ifdef([AC_PROVIDE_IFELSE],
792 [],
793 [define([AC_PROVIDE_IFELSE],
794 [ifdef([AC_PROVIDE_$1],
795 [$2], [$3])])])
796
797# AC_LIBTOOL_CXX - enable support for C++ libraries
798AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
799
800AC_DEFUN([_AC_LIBTOOL_CXX],
801[AC_REQUIRE([AC_PROG_CXX])
802AC_REQUIRE([AC_PROG_CXXCPP])
803LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
804lt_save_CC="$CC"
805lt_save_CFLAGS="$CFLAGS"
806dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
807dnl is set to the C++ compiler.
808AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
809MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
810LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
811AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
812objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
813deplibs_check_method="$deplibs_check_method" \
814file_magic_cmd="$file_magic_cmd" \
815${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
816--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
817|| AC_MSG_ERROR([libtool tag configuration failed])
818CC="$lt_save_CC"
819CFLAGS="$lt_save_CFLAGS"
820
821# Redirect the config.log output again, so that the ltconfig log is not
822# clobbered by the next message.
823exec 5>>./config.log
824])
825
826# AC_LIBTOOL_GCJ - enable support for GCJ libraries
827AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
828
829AC_DEFUN([_AC_LIBTOOL_GCJ],
830[AC_REQUIRE([AC_PROG_LIBTOOL])
831AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
832 [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
833 [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
834 [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
835 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
836 [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
837LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
838lt_save_CC="$CC"
839lt_save_CFLAGS="$CFLAGS"
840dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
841dnl is set to the C++ compiler.
842AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
843MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
844LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
845AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
846objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
847deplibs_check_method="$deplibs_check_method" \
848file_magic_cmd="$file_magic_cmd" \
849${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
850--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
851|| AC_MSG_ERROR([libtool tag configuration failed])
852CC="$lt_save_CC"
853CFLAGS="$lt_save_CFLAGS"
854
855# Redirect the config.log output again, so that the ltconfig log is not
856# clobbered by the next message.
857exec 5>>./config.log
858])
859
860dnl old names
861AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
862AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
863AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
864AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
865AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
866AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
867AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
868
869dnl This is just to silence aclocal about the macro not being used
870ifelse([AC_DISABLE_FAST_INSTALL])dnl
871
872AC_DEFUN([LT_AC_PROG_GCJ],
873[AC_CHECK_TOOL(GCJ, gcj, no)
874 test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
875 AC_SUBST(GCJFLAGS)
876])
Note: See TracBrowser for help on using the repository browser.