Please do not write behind the end of line tag so that it is possible to send a Changelog file to a line printer directly. Thanks. For your entries please follow EXACTLY this style: _yyyy/mm/dd_[Your Name] _ ___*_filename: _____-_description _ ___*_filename2, filename3: _____-_description _ _ _ While an underscore is a placeholder for a white-space or an empty line. -*-*- END OF LINE -*-*- 2005/05/31 Thomas Bretz * mfileio/MReadReports.[h,cc]: - changed such that it can force prereading of the first event of a sequence after PreProcess * mfileio/MReadTree.h: - added some comment about the new bits used in MReadReports * mhflux/MHDisp.cc: - changed fit limit from 1.1 to 1.0 - fixed access to wrong axis * mhflux/MHEffectiveOnTime.cc: - fixed a bug which caused the first bin of the histograms vs time to disapear in PostProcess, which gave wrong results on the screen. The output and all following programs not directly accessing the histograms haven't been affected * mjobs/MJCalib.cc: - HasEnv for boolean type resources is obsolete and has been removed * mjobs/MJCalibrateSignal.cc: - removed MPointingPosInterpolate - adapted usage of MReadReports to changes * mjobs/MJCut.cc, mjobs/MJStar.cc: - adapted usage of MReadReports to changes - made Drive-tree a 'required' tree * mjobs/MJStar.cc: - removed "Events" from setting up rate and effective on time tasks to tlist2. It is obsolete because calibration events don't enter star at all. * mpointing/MPointingPosCalc.[h,cc]: - assume that the run-type is real-data if Process is called before ReInit * merpp.cc: - new options: --auto-time-start --auto-time-stop * mbadpixels/MBadPixelsTreat.cc: - removed the checks in the algorithm whether the current pixel is NULL. MSignalCam doesn't support zero supression anymore. GetPixById has been replaced by the []-operator 2005/05/30 Thomas Bretz * msql/MSQLServer.cc: - added possibility to setup SelectDatabase from resource file * mbadpixels/MBadPixelsCalc.[h,cc]: - implemented the possibility to use the check routine from outside - check now returns kFALSE if more than 50% of all pixels are marked as unsuitable * mhflux/FluxLinkDef.h, mhflux/Makefile: - added MHDisp - added MMcSpectrumWeight * mhflux/MHFalseSource.[h,cc]: - allow finding of Off-plot for derived classes - like in MHAlpha - get source position from MSourcePos if existing - changed some data members from private to protected * mhflux/MHDisp.[h,cc]: - added * mjobs/MJCut.[h,cc]: - implemented new option (HistNameFS) to allow using a different False Source Plot * mpedestal/MPedPhotCam.[h,cc]: - added a copy constructor to allow conversion from MPedestalCam * mpointing/MSrcPosCam.[h,cc]: - added copy constructor 2005/05/30 Daniela Dorner * datacenter/scripts/buildsequenceentries, checkstardone, correcttime, doexclusions, fillcallisto, insertdatasets, runganymed, checkfilesforsequenceavail, copyscript, filesondisk, fillstar runcallisto, runstar, writesequencefiles: - moved two variables from the scripts to the sourcefile * datacenter/scripts/runganymed: - changed # of processes * datacenter/macros/buildsequenceentries.C, filldotrbk.C, fillstar.C, insertcacofile.C, plotdb.C, setstatus.C, checkfileavail.C, doexclusions.C, filldotrun.C, findcacofiles.C, insertdataset.C, resetallruns.C, setupdb.C, checkstardone., fillcalib.C, fillsignal.C, getdolist.C, insertdate.C, resetcolumn.C, writesequencefile.C: - adapted the macros to the changes in msql/MSQLServer.cc * datacenter/macros/fillstar.C: - adapted the functions for the myon parameter after the bugfixes in the calibration 2005/05/27 Daniela Dorner * datacenter/macros/plotdb.C: - changed binning of fConvFactorInner - added plot vs ZdMin * datacenter/macros/resetcolumn.C: - added (macro to reset value in the DB) * datacenter/scripts/runganymed: - removed command line option for ganymed, which is default now 2005/05/27 Javier Rico (2005/05/26) * mbadpixels/MBadPixelsCam.cc - fixed small bug in the Print() function (one line was printed out at a wrong place). (M. Gaug) 2005/05/27 Javier Rico (2005/05/24) * mhcalib/MHCalibrationHiLoCam.cc - do not write Arrays if flag kOscillations is not set. (this was actually a bug since it caused a huge usage for large amounts of data). (M. Gaug) * mcalib/MCalibColorSet.cc - set colour already in the ReInit(), needed by the digital filter later. (M. Gaug) * mjobs/MJCalibration.cc - forgot to merge hi-lo calibration factors for intensity calibration. (M. Gaug) * mhcalib/MHCalibrationCam.[h,cc] - do not Finalize histograms if a flag kReset is set. Caused wrong result in last run of intensity calibration. (M. Gaug) * msignal/MC_calibration_weights_UV.dat - Removed. It was confusing to have this file since it was just a copy of calibration_weights_UV.dat. For MC calibration you can just use the same weights files as for real data. (A. Moralejo) * msignal/calibration_weights_blue46.dat - added missing weights file (M. Gaug) 2005/05/27 Markus Gaug (2005/05/21) * mcalib/MCalibrationChargePix.[h,cc] - allow setting of extractor resolution in CalcReducedSigma() * mcalib/MCalibrationChargeCalc.[h,cc] - implement usage of extractor resolution (only if UseExtractorRes is set). 2005/05/27 Thomas Bretz * Makefile: - removed mmontecarlo directory * mmontecarlo/MMcEnergyEst.[h,cc], mmontecarlo/MMcTimeGenerate.[h,cc], mmontecarlo/MMcWeightEnergySpecCalc.[h,cc]: - removed * sponde.rc: - added new line for weighted spectral index * mbadpixels/MBadPixelsCalc.[h,cc]: - added an option to perform the checks also in PostProcess * mhbase/MFillH.h: - added default argument to SetWeight * mhbase/MH3.h: - added Sumw2() member function * mhflux/MHCollectionArea.[h,cc]: - added TLatex output to plots - added some Getter * mjobs/MJSpectrum.[h,cc]: - implemented the possibility to weight the monte carlo spectrum to a new index or function. More details can be found in MMcSpectrumWeight - slightly changed the plot comparing the size distributions - scale the comparsison plots by the resulting spectrum * mjobs/MJob.[h,cc]: - added a member function to check ReadEnv of a single container * mjobs/Makefile: - added -I../mmc * mmc/MMcEvt.[hxx,cxx], mmc/McEvtBasic.[hxx,cxx]: - changed the inheritance: MMcEvt now derives from MMcEvtBasic so that both classes are interchangable - increased both class versions - chaged the default partictle in MMcEvtBasic from kGAMMA to kUNDEFINED - added new particle type: kUNDEFINED * mhflux/MMcSpectrumWeight.[h,cc]: - added * callisto_Dec04Jan05.rc: - commented MJPedestalC1.ExtractSignal.FallTimeHiGain because it is the dfeault now * msignal/MExtractTimeAndChargeSpline.cc: - changed default of fgFallTimeHiGain to 0.5 * mimage/MHillasSrc.h: - added copy constructor and Copy function * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc]: - implemented reading of automatic weights file following an idea of Markus G. * mjobs/MJPedestal.cc: - fixed the reading of the resource file fopr the extractor (reading the extractor from file can overwrite the seetings) * msignal/MC_weights46.dat: - updated from BCN cvs * msignal/Makefile: - added -I../mcalib * callisto.rc: - updated comments * mcalib/MCalibrateData.[h,cc]: - same small changes to layout - mainly unrolled Form-statements * msignal/MExtractFixedWindow.cc: - added case 12 and a default for logain setting the extractor resolution (partly taken from bcn cvs) 2005/05/25 Thomas Bretz * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, readraw.cc, sponde.cc, star.cc: - made the output about the root version clearer * mbase/MEvtLoop.cc: - call CallProcess instead of Process for the mail tasklist (this makes sure that all counters are correct) This should NOT be done for Pre/PostProcess * mbase/MStatusDisplay.cc: - fixed a possible crash if padsave==NULL - fixed the missing first tab in postscript files * mbase/MTask.cc: - initialize fNumExec0 with 0 (this was the reason why the missing CallProcess in MEvtLoop didn't seem to have any effect on the possible printing of the statistics * mhflux/MAlphaFitter.cc: - improved output * mhflux/MHEffectiveOnTime.cc: - added some eMail from Wolfgang about treating the calibration events to the class description - removed some debug output in Paint() * mhflux/MHThetaSq.cc: - replaced \\theta by \\vartheta * mhvstime/MHPixVsTime.cc: - fixed a bug found by marcos: the error bars weren't retrieved correctly (instead of fTypeErr fType was requested) * mjobs/MJStar.cc: - do not use calibration events for rate and effective-on-time calculation * mjobs/MJob.cc: - added some debug output to ExpandPath * msignal/MExtractTime.h, msignal/MExtractTimeAndCharge.h, msignal/MExtractor.h: - added Print() to //*MENU* 2005/05/25 Daniela Dorner * datacenter/macros/fillcalib.C, setupdb.C: - changed presicion of parameter * datacenter/macros/plotdb.C: - added (macro to plot quality paramter from the DB) 2005/05/24 Daniela Dorner * datacenter/macros/fillstar.C: - added new parameters * datacenter/macros/setupdb.C: - added variables for the new parameters 2005/05/23 Daniela Dorner * datacenter/scripts/fillstar: - fixed bug in path * datacenter/macros/fillstar.C, fillcalib.C, fillsignal.C: - added check * datacenter/macros/fillcalib.C, setupdb.C: - adapted variables for the conversion factor 2005/05/20 Thomas Bretz * RELEASE 0.9.2 2005/05/20 Daniela Dorner * datacenter/scripts/insertdatasets,checkstardone: - adapted paths for release * datacenter/macros/fillstar.C: - adapted functions to calculate psf and the ratio * datacenter/scripts/runganymed: - adapted ganymed command 2005/05/20 Thomas Bretz * msignal/MExtractTimeAndChargeSlidingWindow.cc - increased log-gain window from 6 to 8 according to an UNDOCUMENTED change in the bcn cvs * mhcalib/MHCalibrationChargePINDiode.cc: - removed a check in fill according to an UDOCUMENTED change in the bcn cvs * mhcalib/MHCalibrationChargePINDiode.cc: - use a dynamic_cast for the Fill-argument * mjobs/MJCalibration.cc: - shortened output line telling file name of hi-/lo-gain calibration * mjobs/MJPedestal.[h,cc]: - moved code for PulsePosCheck into own function - put also code for pixel check into this function - added a sanity check for fExtractor at some places * msignal/MExtractor.cc: - added output of pedestal container - if available - in Print() - improved format of Print() output * mbase/MEvtLoop.[h,cc]: - removed the obsolete (it was never been used) argument from PreProcess - replaced the second obsolete argument in Eventloop by a flag whether statistics should be printer or not: default=kTRUE - Print statistics automatically in Eventloop if tasklists Process has ever been touched. * mjobs/MJCalibTest.cc, mjobs/MJCalibration.cc, MJCalibrateSignal.cc, mjobs/MJCut.cc, mjobs/MJOptimize.cc, mjobs/MJPedestal.cc, mjobs/MJSpectrum.cc, mjobs/MJStar.cc: - removed call to PrintStatistics - no done automatically in MEvtLoop * mpedestal/MExtractPedestal.cc: - removed InitArrays after ReInit of fExtractor. It is done there automatically * mjobs/MJCalibrateSignal.cc: - don't add pinext and bldext to tasklist if not necessary (UNDOCUMENTED change from bcn cvs) * callisto.rc, callisto_Dec04Jan05.rc: - replaced wrong MaxHiGainVar by MaxSignalVar (was nowehere really used) * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc: - some simplifications to the access of histograms after the loop has finished. There is no need to search for them in the parameter list. * mjobs/MJCut.cc: - fixed the file-path when writing the status display and an output path was given. * mjobs/hilocalib_sp1.root: - new intercalibration constants due to the latest bug-fixes * manalysis/MCameraData.[h,cc]: - removed all stuff depending on MSigmabar * manalysis/MSigmabar* - removed 2005/05/20 Markus Gaug (2005/05/19) * mjobs/MJPedestal.cc: - fixed an important bug in the setting of the incoming pedestal pointer to the signal extractor. This bug caused the pedestals not to be subtracted correctly in the calibration afterwards. The effect was about 10% too high conversion factors for the digital filter and the spline and more than 40% for the sliding window. The bug existed since end of February! (Markus G.) 2005/05/20 Markus Gaug (2005/05/18) * mcalib/MCalibrationChargeCalc.cc - issue a warning if no colour has been set until the PostProcess. (happens to old MC files). 2005/05/19 Markus Meyer * mmuon/MHMuonPar.cc: - add a second integral in the function paint, which is plotted in the MStatusDisplay 2005/05/19 Daniela Dorner * datacenter/macros/fillstar.C: - add new parameter * datacenter/macros/setupdb.C: - adapted to new column in db * callisto_Dec04Jan05.rc: - set value for MJPedestalY2.MaxEvents from 2000 to 5000 to get better statistics for the calculation of the mean pulse time of the cosmisc * datacenter/scripts/runganymed: - fixed bug in path 2005/05/19 Thomas Bretz * msignal/MExtractTimeAndCharge.cc: - simplified a really cryptical use of the ?:-operator when the fLoGainFirst is calculated - fixed a bug introduced in the calculation of the derivatives * mmain/MEventDisplay.cc: - removed MC trigger display * mbase/MTaskList.[h,cc]: - member function to use MTaskList in a TIter * mhflux/MAlphaFitter.[h,cc]: - improved the output line plotted into the histogram - implemented getter for fSigInt - start integration in first bin not in underflow bin - added 'background' option for scaling * mhflux/MHAlpha.[h,cc]: - added some comments - improved DistancetoPrimitive * mhflux/MHThetaSq.[h,cc]: - derives the binning now from the cut value or the MAlphaFitter * mjobs/MJStar.cc: - moved weather data histogram back to the end - otherwise MEventRate is not initialized before 2005/05/18 Thomas Bretz * mcalib/MCalibCalcFromPast.cc: - added missing fIntensQE to list of initialization in constructor * mcalib/MCalibrateData.cc: - fixed a bug which caused kNo to be ignored - removed a second check for the size of the badpixelcam * mjobs/MJCalibrateSignal.cc: - removed the obsolete second adding of filhil and filpul to the tasklist * mjobs/MJCalibration.cc: - do not display result or statistics if no execution has taken place * mjobs/MJStar.cc: - moved processing of CC-branch to the beginning of the tasklist * msignal/MExtractTimeAndChargeSpline.[h,cc]: - introduced some small changes to the validity range of some variables - determin the higher bound above which no search is done analog to the lower bound using the fall-time - CalcIntegral[Hi,Lo]Gain now returns sum. No need for a reference - fixed calling Integral[HI,Lo]Gain in cases we are at the edge of the valid range -- at a lot of position in the code random memory above or below the arrays have been accessed. - improved the numercila stability of CalcIntegral[Hi,Lo]Gain more by calculating the number of steps from the rise and fall time. this should at least give consistent results on the same machine! * mbase/MContinue.cc: - fixed a namimg problem of the filter when it is added to the tasklist and has the same name as MContinue * mcalib/MCalibrationChargeCalc.cc: - for some sceen output the manipulator (inf) was missing * msignal/MExtractPINDiode.cc, mcalib/MCalibrationChargeCalc.cc, mcalib/MCalibrationChargeCam.cc: - fixed a problem with the fit (it always tried to display the fit-function somewhere) 2005/05/17 Thomas Bretz * callisto.rc, callisto_Dec04Jan05.rc: - added new comments diescribing setup of MFCosmics * mfilter/MFCosmics.[h,cc]: - skip bad pixels using MBadPixelsCam - implemented a check in PostProcess about the fraction of events which survived or were rejected - added ReadEnv for setup * mfilter/Makefile: - added mbadpixels - removed mmain and manalysis * mhcalib/MHCalibrationChargeCam.h: - removed numbers from data member descrition -- too much to maintain * mhcalib/MHCalibrationChargePINDiode.h: - incremented version number (undocumented from bcn) * mjobs/MJCalibration.cc: - reorganized some TText output (undocumented from bcn) - overwrite the default of MaxNumberEmptyPixels by 0.05 (undocumented from bcn) - print tasklist statistics also if eventloop returned KFALSE * msignal/MExtractTimeAndChargeDigitalFilter.cc: - changed fgLoGainStartShift from -2.8 to -1.8 (undocumented from bcn) * msignal/MExtractTimeAndChargeSlidingWindow.h: - increased version number from 0 to 1 (undocumented from bcn) 2005/05/17 Markus Gaug (2005/05/16) * msignal/MExtractor.[h,cc] - introduce two new variables: fResolutionPerPheHiGain and fResolutionPerPheLoGain, to be set by deriving extractors. - set version number one higher. * msignal/MExtractFixedWindow.[h,cc] * msignal/MExtractTimeAndChargeSlidingWindow.[h,cc] * msignal/MExtractTimeAndChargeSpline.[h,cc] * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - set the variables fResolutionPerPheHiGain and fResolutionPerPheLoGain * msignal/MExtractPINDiode.[h,cc] - adapt to current PIN Diode signal, fit signal with Gaussian - set version number up by one. * msignal/MExtractedSignalPINDiode.[h,cc] - set new data member fExtractedChi2 - set version number up by one. * mhcalib/MHCalibrationChargePINDiode.cc - adapt one function to newly used names. - adapt signal tests. * mjobs/MJPedestal.[h,cc] - read MBadPixelsCam together with extractor, if exisiting (necessary for bad pixels exclusion in pulse position search). * mjobs/MJCalibration.[h,cc] - use MFCosmics in any case (not only for CT1-pulses) and apply a quality criteria depending on number of rejected events: MaxExcludedEvents (default: 50%). 2005/05/17 Daniela Dorner * datacenter/macros/setupdb.C - adapted to new column in datasetstatus-table * datacenter/macros/checkstardone.C - added (macro to check if star has been done for a sequence) * datacenter/scripts/checkstardone - added (script that executes checkstardone.C for all datasets * datacenter/scripts/checkfilesforsequenceavail, fillcallisto, fillstar - fixed bug * datacenter/scripts/buildsequenceentries, doexclusions, writesequencefiles - adapted paths * datacenter/scripts/insertdataset - added logging * datacenter/scripts/runganymed - added (script to run ganymed automatically for datasets) * datacenter/scripts/runcallisto - adapted paths - fixed bug * datacenter/scripts/runstar - adapted paths - fixed bug * steps.rc - adapted resource file to needs of the new table in db 2005/05/13 Daniela Dorner * datacenter/macros/insertdataset.C - added (macro, that inserts dataset into db) * datacenter/macros/setupdb.C - adapted to new table in db * datacenter/scripts/insertdatasets - added (script, that inserts datasets into db) * datacenter/scripts/sourcefile - added (file with commands and variables, that are needed by all scripts) * datacenter/scripts/buildsequenceentries, checkfilesforsequenceavail copyscript, correcttime, doexclusions, filesondisk, fillcallisto, fillstar, runcallisto runstar, writesequencefiles - adapted scripts to the usage of the sourcefile * datacenter/macros/fillcalib.C: - changed name of histogram according to change of Markus - removed debugoutput 2005/05/13 Thomas Bretz * mreport/MReportCC.cc: - fixed reading of rep-files for versions newer than V200404070 * mpointing/MSrcPosCalc.cc - took a bugfix from Wolfgang to Loc0LocToCam and implemented it Wolfgang: the results are changed only minimally * msignal/MExtractTimeAndChargeSpline.cc - integration ranges were shifted by 0.2 FADC slices to the right. Fixed in the new algorithm according to Markus' change. * mcalib/MCalibrationChargeCalc.h: - Incremented ClassVersion number by 1 * mhcalib/MHCalibrationPulseTimeCam.cc: - removed a commented debug output * mjobs/MJCalibration.cc - new undocumented adjust of "Unsuitable"- and "Unreliable"-displays for new exclusion criteria taken from bcn * manalysis/MEventRateCalc.cc: - some fixes. In some cases the event rate wasn't calculated anymore * mbadpixels/MBadPixelsCalc.cc: - fixed a bug when checking whether the check should be done or not (>0 was missing) * mhist/Makefile: - added MHWeather * mhvstime/MHVsTime.[h,cc]: - implemented new function the set minimum * mjobs/MJStar.cc: - read weather data (CC tree) - set minimum of rate-display to 0 - display weather data for non-MC files * mmuon/MHSingleMuon.cc: - slight change to a comment * callisto.rc: - added new possible setup * callisto_Dec04Jan05.rc - added new possible setup - use default for MJCalibration.ExtractSignal.LoGainSwitch * mbadpixels/MBadPixelsCalc.cc: - exclude unsuitable pixels from mean/rms calculation - changed the lower bound for the second mean loop from 0.5 to 0.66 * mbadpixels/MBadPixelsCam.cc: - added case 102 returning the global unsuitable status of an event * mhist/MHCamEvent.h: - added default 0 to SetThreshold * mjobs/MJCalibrateSignal.cc: - use new case 102 for unsuitable display - enable counting (to get the correct display also with profile option switched on) * mraw/MRawRunHeader.cc: - after displaying millions of hex numbers switch back to dec 2005/05/13 Markus Gaug (2005/05/12) * msignal/MExtractTimeAndChargeDigitalFilter.cc - set default extraction range in the high gain to 4. - set default weights file to cosmics_weights46.dat * mhcalib/MHCalibrationHiLoCam.cc - set Oscillations to kFALSE * mhcalib/MHCalibrationChargeCam.cc - set default for fNumHiGainSaturationLimit to 0.15 * mjobs/MJCalibrateSignal.[h,cc] - put MHCalibrationHiLoCam and MHCalibrationPulseTimeCam directly into tasklist if needed. Otherwise, it does not read the resources from the config. file. 2005/05/11 Markus Gaug (2005/05/11) * mjobs/MJPedestal.cc - adjust the fit ranges for the histogramming with moon data slightly. * mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationChargeCalc.cc - make a distinction between newly excluded pixels (by calibration) and previously excluded pixels in the displays and print-functions * mcalib/MCalibrationChargeCalc.cc - introduce the check for fluctuating arrival times. - set charge limit to from 2.5 to 4.5 - introduce asymmetric exclusion due to "deviating number of phes": Default: -9.0 +4.5 - make deviating number of phes unsuitable (see David's findings). * mbadpixels/MBadPixelsPix.h - add kDeviatingNumPhes to function GetUnsuitableCalLevel() 2005/05/13 Daniela Dorner * datacenter/scripts/runstar - fixed bug in the calculation of the number of to-do-files * datacenter/scripts/runcallisto - fixed bug in the calculation of the number of to-do-files 2005/05/12 Daniela Dorner * datacenter/macros/fillcalib.C: - removed debugoutput * datacenter/macros/fillstar.C: - added (macro to read parameters from the star*.root files and fill them into the db) * datacenter/macros/setupdb.C: - added new table 'Star' * datacenter/macros/buildsequenceentries.C: - added delete-query for new table 'Star' in the delete function * datacenter/scripts/runstar - changed number of processes * datacenter/scripts/runcallisto - changed number of processes * datacenter/scripts/fillstar - added (script to run macro fillstar.C automatically) 2005/05/12 Thomas Bretz * mcalib/MCalibrationChargeCam.cc: - fixed a bug in FinalizeArrivalTime which caused Form() to hang * mmuon/MHMounPar.[h,cc] - added a line showing a reference shape * star.rc: - added setup strings for software trigger * mbase/MContinue.cc: - allow setup of already set filters in ReadEnv. They must not necessarily be already in the tasklist * mcalib/MCalibrationChargeCalc.cc: - shortened a lot of Form() calls to reduce the risk of memory corruption * mjobs/MJCalibration.cc: - some cosmetics to text in pad * mraw/MRawRunHeader.[h,cc]: - a fix to MRawRunHeader because the definition of the raw-data format has changed. fProjectName and fSourceName has no trailig \0 anymore by default - incremented ClassVersion by 1 2005/05/12 Markus Meyer * mmuon/MHMounPar.[h,cc] - added function Paint. This function integrates the TProfile ArcWidth/Radius Vs. Radius between certain values and shows the result in the Status Display * mmjobs/MJStar.cc - changed the default values for the final muon cuts * star.rc - changed the default values for the final muon cuts 2005/05/11 Thomas Bretz * mbase/MStatusDisplay.cc: - fixed year of copyright * mcalib/MCalibCalcFromPast.cc: - undocumented change from BCN: a new resource has been implemented in ReadEnv (NumEventsDump) * mjobs/MJob.[h,cc]: - added new static member function which can be used to overwrite relative paths with a default 2005/05/11 Abelardo Moralejo (2005/05/11) * mjobs/MJPedestal.cc - Fixed use of MFTriggerPattern: first, added it to the tasklist (was missing); second, added to tasklist MTriggerPatternDecode before MFTriggerPattern. This was the reason for the problems reported by T. Coarasa on May 9. I do not know why the behaviour of the previous version depended on compiler, but this seemed to be the case... 2005/05/11 Markus Gaug (2005/05/11) * mjobs/MJCalibration.cc - display in Tab "Conv" in the 3rd column the conversion to equiv. phes instead of Cherenkov photons. * mjobs/calibrationref.rc, mjobs/calibrationref_Nov04.rc, mjobs/calibrationref_Dec04.rc: - add reference lines for the conv. to equiv. phes. * mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationChargeCalc.cc: - make a distinction between newly excluded pixels (by calibration) and previously excluded pixels in the displays and print-functions * mcalib/MCalibrationChargeCalc.cc - introduce the check for fluctuating arrival times. - set charge limit to from 2.5 to 4.5 2005/05/10 Markus Gaug (2005/05/10) * mhcalib/MHCalibrationHiLoCam.cc - ask for averageing and do not fill the arrays per pixel any more. This caused too much memory usage for the calculation of the high-gain low-gain inter-calibration constants. * mcalib/MCalibrationChargePix.[h,cc] - store number of saturated events in the results container. - set version number by one higher (due to new data member). * mhcalib/MHCalibrationChargeCam.cc - store number of saturated events in the results container. - allow reading of NumHiGainSaturationLimit and NumLoGainSaturationLimit in ReadEnv - set saturation limit from 5% to 8.5% * mbadpixels/MBadPixelsPix.h - introduce new bits: kDeadPedestalRms, kPreviouslyExcluded, kFluctuatingArrivalTimes * mbadpixels/MBadPixelsCam.cc - set bit kPreviouslyExcluded in the AsciiRead-Function - include three new bits in the Print() function * mjobs/MJCalibration.cc - display excluded pixels from DeadPedestalRms in Defect-Tab. - display correct error of the RMS/Mean charge diagramm. * mcalib/MCalibrationChargeCam.cc - calculate the error of RMS/Mean values in GetPixelContent Nr.33 2005/05/11 Hendrik Bartko (2005/05/09) * msignal/MC_weights46.dat - updated weights file for digital filter with dedicated MC weights with 4 slices for the high gain and 6 slices for the low gain 2005/05/10 Daniela Dorner * datacenter/macros/fillcalib.C: - added some parameters (reading from calib*.root and inserting into db) * datacenter/macros/setupdb.C: - adapted macro to the new columns in the calibration db * datacenter/macros/fillsignal.C: - fixed typo 2005/05/10 Markus Meyer * mmuon/*: - update of the class documentation * mmuon/*: - commented out the ArcLength and Estimpact (will be not calculated for the moment) 2005/05/10 Thomas Bretz * mreport/MReportStarguider.cc: - introduced the correct version which marked the fix of the units of the nominal position * callisto.rc: - introduced a new line for new option in MCalibColorFromPast * ganymed.cc: - removed option "--full-display" -> now default * manalysis/MEnergyEstimate.cc: - print the rule a bit earlier in PreProcess * mfilter/MFDeltaT.cc: - fixed a typo in the output * mhflux/MAlphaFitter.cc: - some improvements to output * mjobs/MJCut.cc: - added ThetaSquared to output * mjobs/MJStar.cc: - fixed bug in copying of OriginalMC tree * mmuon/MMuonCalibParCalc.cc: - removed obsolete setting of ReadyToSave * mjobs/MJSpectrum.cc: - made sure the correct type of MHAlpha is used 2005/05/10 Markus Gaug (2005/05/09) * mjobs/hilocalib_sp1.root * mjobs/hilocalib_sp1_mc.root - new hi-lo intercalibration files with the fixed spline extractor. * mjobs/hilocalib_df46_mc.root - new hi-lo intercalibration files from MC with the left out -O5 option. (The real data files had already the correct executable). 2005/05/10 Hendrik Bartko (2005/05/09) * msignal/MC_weights46.dat - NEW weights file for digital filter with dedicated MC weights with 4 slices for the high gain and 6 slices for the low gain 2005/05/10 Markus Gaug (2005/05/08) * mhcalib/MHCalibrationCam.[h,cc] - introduce parameters fLowerFitLimit and fHigherFitLimit to tell explicitly from outside to fit functions in a certain range. If both are 0. (default), the histogram limits define the fit limits (as before). 2005/05/10 Abelardo Moralejo (2005/05/07) * mcalib/MMcCalibrationCalc.cc - in Process, fixed wrong estimate of true number of "equivalent photoelectrons" (correctedphotel). This worked roughly OK as long as the file used for calibration was a (noiselesss) gamma file, because most light is contained in the inner camera and the problem was related to the light going into the outer pixels. So results are not much affected, unless one uses for calibration a file with events having a lot of light in the outer camera. Thomas Hengstebeck noticed this problem when he used a file of MC calibration pulses in mccalibrate.C * manalysis/MMcCalibrationUpdate.[h,cc] - Added possibility to set the hi to lo gain conversion factor. Until now the factor was simply the ratio of pulse areas as read from MMcFadcHeader. This of course is not the factor to be applied to the extracted signals unless the extractor integrates the full pulse in both high and low gain. The factor depends then on the extractor, and the user has to find out what its value is. Set as default calibration type kPhe. * macros/mccalibrate.C, starmc.C - Added the setting of the hi to lo gain conversion factor (see above). For now it has to be calculated by the user. However, it is strongly recommended from now on to use always callisto for the calibration of real data, and not these macros. These are kept just for checking purposes, mostly by "experts". 2005/05/10 Robert Wagner (2005/05/06) * mreport/MReportStarguider.[h,cc]: - Bugfix: Sequence of extracting fDevZd and fDevAz (switched) 2005/05/10 Markus Gaug (2005/05/05) * mcalib/MCalibCalcFromPast.[h,cc] - introduce flag "fUpdateWithFFactorMethod" which allows to use the entire results obtained with the F-Factor method (including a new number of mean photo-electrons). This possibility is switched on (only) if somewhere in the callisto.rc file the following line is written: MJCalibrateSignal.MCalibCalcFromPast.UpdateWithFFactorMethod: yes (Default is still the old way of adjusting the relative extracted charges w.r.t. the mean charge over the inner camera). 2005/05/10 Markus Gaug (2005/05/02) * mcalib/MCalibrationChargeCam.[h,cc] - added new function MergeHiLoConversionFactors * mcalib/MCalibColorSteer.[h,cc] - introduce copying of hi-lo calibration factors from one cam to the next in intensity calibration. - added storage of averageing histograms of flag fHistStorage is set * mcalib/MCalibrationIntensityCam.[h,cc] - introduce place for storage of averageing histograms (if wanted). 2005/05/09 Markus Meyer * mmuon/MHSingleMuon.cc - changed the default value for the binning of fHistPhi - changed the start parameter for the gaussian fit for the calculation of ArcWidth 2005/05/09 Thomas Bretz * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, readraw.cc, showplot.cc, sinope.cc, sponde.cc, star.cc: - changed order of initialization such that a real NULL output is possible - changed TApplication name from upper to lower case - in some applications replaced manual setup of gLog with gLog.Setup * showlog.cc: - improved alorithm * showplot.cc: - implemented Print options * mbase/MLog.[h,cc]: - fixed a bug which caused output in NULL output - added Getter IsNullOutput * mbase/MStatusDisplay.[h,cc]: - implemented PDF and SVG printing - moved "Save As Something" to new submenu - fixed and improved printing - implemented PrintDialog for printing - implemented printing of log (untested) - allow saving by extension (line Print() in root): SaveAs * mfileio/MWriteRootFile.h: - replaced BIT(17) by BIT(23) to improve compatibility with root 4.04/00 and upcomming versions * mhflux/Makefile, mjobs/MJCut.cc: - replaced MTheta by MThetaSq to get rid of a problem with the automatic naming of the binning (BinningTheta) * mhist/MHCamera.[h,cc]: - fixed a workaround (it has been fixed in root 4.04/00) - allow setting the palette through the Draw-option. This allows storage of the palette - removed fColor. The palette is now diretly set though gStyle in Paint * mjobs/MJOptimize.cc: - restore null output correctly after eventloop * mjobs/MJSpectrum.cc: - renamed Hist and HistOff to HistE and HistEOff - added binnings M3Long and Conc1 2005/05/06 Thomas Bretz * mbase/MStatusDisplay.cc: - fixed constructor to work with newer root versions (gClient!=NULL) * mfileio/MWriteRootFile.h: - added a comment about BITs used by root * mhflux/MHEffectiveOnTime.cc: - use 1e-10 instead of 0 in TPad::Divide 2005/05/06 Daniela Dorner * datacenter/scripts/copyscript: - added command to ensure the correct permissions of the files on disk 2005/05/04 Markus Meyer * mjobs/MJStar.cc: - added cut in ArcWidth (final cuts for muons) * star.rc: - added cut in ArcWidth * mmuon/MHSingleMuon.h - added a Getter for fHistWidth 2005/05/04 Thomas Bretz * mfileio/MWriteRootFile.cc: - fixed a possible infinite loop when compiling the new file name as suggested by Abelardo * mhflux/MHAlpha.cc: - search for fName+"Off" instead of ClassName()+"Off" * mjobs/MJSpectrum.cc: - scale the displayed zd-plots by their maximum as the histograms are scaled before * mjobs/MJStar.cc: - implemented writing of the muon parameters. This takes another 5% of the time (in total 15-20% for muon analysis). It enlarges the file size by roughly 15% (a test file was enlarged from 5.1M to 5.9M) * mmuon/MMuonCalibPar.cc: - set default of ArcPhi to an invalid value = -1 * mreport/MReportDrive.cc: - fixed a typo in the comments 2005/05/03 Thomas Bretz * mjobs/MJCut.cc: - added histogram 'OnTime' for MC * mpointing/MSrcPosCalc.cc: - removed dependancy on MTime for MC * star.cc: - addde possibility to switch off muon analysis * star.rc: - added parameters for muon analysis * mbadpixels/MBadPixelsCam.cc: - fixed a typo in a comment * mjobs/MJStar.[h,cc]: - added possibility to switch off muon analysis * mjobs/Makefile: - added -I../mmuon * mjobs/MJCut.cc, mjobs/MJSpectrum.cc: - renamed MHAlpha to Hist (to have a common naming for all options) - renamed MHAlphaOff to HistOff 2005/05/02 Thomas Bretz * ganymed.rc: - updated to the latest changes * mhflux/MHAlpha.[h,cc]: - made a base class with the necessary interface to derived classes to support other variables like dca or theta * mjobs/MJCut.[h,cc]: - added support for MHAlpha derived classes - made MHTheta the default * mhflux/MHTheta.[h,cc]: - added * mhflux/Makefile, mhflux/FluxLinkDef.h: - added MHTheta 2005/04/29 Thomas Bretz * manalysis/MEventRateCalc.cc: - fixed jumps when a new run is initiated - set as time a time which represents the starting point of the calculation interval in all cases * star.rc, mmuon/MMuonCalibParCalc.cc, mmuon/MMuonSetup.[h,cc]: - fixed wrong units of thresholds for muon analysis * mmuon/MHSingleMuon.cc: - removed obsolete conversion factor in error calculation - FindeCreateObj called for MMuonSetup - get NDF from fit - optimized FindRangeAboveThreshold - handle special case when arcphi is 360deg * star.cc: - replaced ProcessFile by Process * mjobs/MJSpectrum.cc: - renamed second MHAlpha tab to MHAlphaOn to be able to access each tab uniquely - fixed a bug calling SetStats which could cause crashes * mjobs/MJStar.[h,cc]: - preliminary implementation of the muon analysis - reanamed ProcessFile to Process 2005/04/28 Thomas Bretz * manalysis/MMultiDimDistCalc.[h,cc]: - replaced MHadronness by MParameterD * mhflux/MHEnergyEst.cc: - removed obsolete include of MEnergyEst * mmuon/MHMuonPar.cc: - fixed a type in an axis label 2005/04/27 Thomas Bretz * Makefile: - added mmuon - remobed mstarcam * callisto.cc, ganymed.cc, star.cc: - renamed ProcessFile to Process * star.rc: - added some muon parameters * mastro/MAstroCamera.[h,cc]: - temporarily removed interface to MStarPos * mbase/MStatusArray.h: - added default constructor * mcalib/MCalibColorSet.cc: - added runs 39942, 39944, 44834, 39941, 39943 and 44833 (undocumented change from the BCN cvs) * mjobs/MJCalib.[h,cc], mjobs/MJCalibTest.[h,cc], mjobs/MJCalibrateSignal.[h,cc], mjobs/MJCalibration.[h,cc], mjobs/MJCut.[h,cc], mjobs/MJPedestal.[h,cc]: - removed support for MRunIter (use the setter of MSequence instead) -- this makes the code a lot easier to maintain - removed support for autodetection if the output already exists -- this makes the code a lot easier to maintain - renamed ProcessFile to Process - which was missleading * mmuon/MHMuonPar.[h,cc]: - changes to axis labels etc. * mmuon/MMuonCalibPar.[h,cc]: - removed the histograms and all obsolete variables - removed obsolete SetUseUnmap (this cannot happen by definition of Unmap) * mmuon/MMuonCalibParCalc.[h,cc]: - moved the code for calculation the parameters to new class MHSingleMuon * mmuon/MMuonSearchPar.[h,cc]: - replaced arbitrary fir by minuit (faster and more accurate) - removed precalculation of muon center - makes fit worse * mmuon/MMuonSearchParCalc.[h,cc]: - fixes to comments - fixes to includes * mmuon/MMuonSetup.[h,cc]: - binnings removed (replaces by MBinning) * mmuon/Makefile, mmuon/MuonLinkDef.h: - added MHSingleMuon * msignal/MExtractTimeAndchargeSpline.cc: - fixed a bug found by Abelardo which could cause different results with different compiler optimiztaion options due to rounding errors. 2005/04/25 Thomas Bretz * ganymed.cc: - changed policy of writing the resulting events to the result file * sponde.cc: - added commandline option to use all monte carlos - added command line option to read the MCs more accurate * sponde.rc: - added * mbase/MStatusDisplay.[h,cc]: - added some code to get Tab by name - fixed a typo in a status line output * mhbase/MH.[h,cc], mhbase/MH3.[h,cc], mhflux/MHFalseSource.h, mhist/MHCamEvent.[h,cc], mhist/MHCamEventRot.h, mhist/MHEvent.h, mhist/MHStarMap.h, mhist/MHTriggerLvl0.[h,cc], mhistmc/MHMcTriggerLvl2.[h,cc], mhvstime/MHPixVsTime.[h,cc], mhvstime/MHSectorVsTime.[h,cc], mimage/MHHillas.[h,cc], mimage/MHHillasExt.[h,cc], mimage/MHHillasSrc.[h,cc], mimage/MHImagePar.[h,cc], mimage/MHNewImagePar.[h,cc]: - changed GetHistByName to be const-qualified to be compatible with FindObject - added some FindObject function to call GetHistByName * mhflux/MHAlpha.[h,cc]: - changed such, that it can be forced to display the excess events versus size * mjobs/MJCut.[h,cc]: - display number of excess events versus Size per default - removed energy estimator * mjobs/MJOptimize.cc: - display number of excess events verss size after optimization * mjobs/MJSpectrum.[h,cc]: - implemented setting up energy estimator - replaced some gLog by fLog - display comparison of image parameters 2005/04/22 Thomas Bretz * mbase/MStatusArray.[h,cc]: - switch off adding histograms to gDirectory in newly overwritten Read-function * mhflux/MHCollectionArea.[h,cc]: - implemented member function GetHistSel - don't display full statistics - fixed a possible crash in Paint 2005/04/22 Markus Meyer * mmuon/MMuonSetup[.h.cc]: - new container class for muon parameters which are not changing from event to event (setup parameters for the analysis). These parameters were stored in MMuonCalibPar before * mmuon/MMuonCalibPar[.h.cc]: - changed MCerPhotEvt and MCerphotPix to MSignalCam and MSignalPix to read the new format - removed the setup parameters (stored now in MMuonSetup) - removed all the sanity checks - removed pre-cuts - cuts in process, to save only muon-like events * mmuon/MMuonCalibParCalc[.h.cc]: - changed MCerPhotEvt and MCerphotPix to MSignalCam and MSignalPix to read the new format - removed pre-cuts * mmuon/MMuonSearchPar[.h.cc]: - changed MCerPhotEvt and MCerphotPix to MSignalCam and MSignalPix to read the new format - * mmuon/MMuonSearchParCalc[.h.cc]: - changed MCerPhotEvt and MCerphotPix to MSignalCam and MSignalPix to read the new format * mmuon/MHMuonPar[.h.cc]: - new histgram class, plots different muon parameters 2005/04/21 Daniela Dorner * datacenter/scripts/runcallisto: - fixed choice of todofile * datacenter/scripts/copyscript: - adapted some paths * datacenter/macros/filldotrun.C: - added 6 new arehucas versions * datacenter/scripts/writesequencefile: - added make path for sequencefiles 2005/04/21 Thomas Bretz * mhcalib/MHCalibrationRelTimeCam.cc: - fixed usage of a uninitialized pointer * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc: - fixed usage of MFTriggerPattern * mtrigger/MFTriggerPattern.[h,cc]: - allow to set default from outside in case no pattern could be decoded 2005/04/20 Thomas Bretz * callisto.cc: - added a comment which shows how to correctly skip job2 if extractor doesn't inherit from MExtractTimeAndCharge, but... // This could skip job2 if extractor doesn't inherit from // MExtractTimeand Charge... but this is not necessary. // We only get the same pedestal twice (which we want to have // anyhow. A switch when using the result of job2 later is also // not necessary, because without running job2 it is identical // with job1 * mjobs/MSequence.cc: - use the sequence number'd directories in case of calibrated data and image files instead of the date. * mhflux/MAlphaFitter.cc: - copy also results in Copy() * mjobs/MJOptimize.cc: - print result of optimization in case MAlphaFitter is used - store results back in initial MAlphaFitter * mjobs/MJSpectrum.[h,cc]: - implemented a faster simple mode weighting the read spectrum with the theta-probability 2005/04/20 Daniel Mazin (2005/04/18) * mreport/MReportCamera.[h,cc] - added necessary changes to include Active Load and Central Pixel info from Camera reports * mcamera/MCameraActiveLoad.[h,cc] - added to store Active Load info from the Camera reports * mcamera/MCameraCentralPix.[h,cc] - added to store Central Pixel info from the Camera reports * mcamera/Makefile * mcamera/CameraLinkDef.h - added MCameraActiveLoad and MCameraCentralPix classes 2005/04/20 Markus Gaug (2005/04/15) * mcalib/MCalibrationChargeCam.[h,cc] - added new function CopyHiLoConversionFactors 2005/04/20 Markus Gaug (2005/04/14) * mcalib/MCalibColorSteer.[h,cc] - fixed a bug in the recognition of the calibration bit pattern. Concerns only intensity calibration. * mcalib/MCalibrationRelTimeCalc.cc - return kTRUE instaed of kFALSE in case that the Process() has never been executed. * mjobs/MJCalibration.cc - add a filter against PIN Diode events since some of the recent calibration runs have been taken with Pin Diode. 2005/04/12 Markus Gaug * mcalib/MCalibrationCam.[h,cc] - added a storage place for the run number * mcalib/MCalibCalcFromCalc.[h,cc] - store the run number in the individual MCalibrationCams 2005/04/19 Thomas Bretz * mjobs/MJCut.cc: - fixed a problem when not enabling "--res" * mimage/MHVsSize.[h,cc]: - added more displayed variables * mjobs/MJSpectrum.[h,cc]: - added * mjobs/Makefile, mjobs/JobsLinkDef.h: - added MJSpectrum * Makefile: - added sponde.cc * sponde.cc: - added * mhbase/MBinning.h: - added Print() to //*MENU* * mhflux/MAlphaFitter.cc: - do not set inf-flag in Print() * mhflux/MHAlpha.[h,cc]: - set all-flag for printing MAlphaFitter("result") - added Getter for excess histogram * mjobs/MDataSet.[h,cc]: - allow to initialize a TChain from this dataset * mjobs/MJCut.cc: - moved energy estimator back before Cut0 otherwise the EnergyEst container is missing in summary file * mhflux/MHCollectionArea.cc: - draw efficiency into third pad 2005/04/18 Thomas Bretz * manalysis/MCompProbCalc.cc, mbadpixels/MBadPixelsCalc.cc, mbadpixels/MBadPixelsTreat.cc: - some fixes to documentation (THtml complained about missing classes) * mbase/MStatusArray.[h,cc]: - implemented some functions to print contents of StatusArray and/or tab/canvas. * mhbase/MFillH.cc: - remove fH from ListOfPrimitives before adding Clone in PostProcess * mhbase/MH.[h,cc]: - implemented new member function RemoveFromPad (necessary if a class should support same-option) * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, mimage/MHImagePar.cc, mimage/MHNewImagePar.cc, mimage/MHVsSize.cc: - fixed naming in case of same-option in Draw - remove previous histograms from pad in case of same-option * mjobs/MJCut.[h,cc]: - write all binnings in WriteResult - write MHillasExt to output - BinningWidth, BinningLength and BinningDist added * mjobs/MJOptimize.[h,cc]: - fixed a typo in output - allow to exchange Test-/Train-Sample * ganymed.cc: - implemented "-mc" option to allow cutting MC samples * showlog.cc: - implemented real treatment of debug-levels - return 1 instead of 0 in cae of normal finish * manalysis/MEnergyEstimate.h, mbase/MContinue.h, mhflux/MAlphaFitter.h: - added Print() to context //*MENU* * manalysis/MMatrixLoop.cc: - fixed returning of number of entries if using split mode * mbase/MContinue.cc: - implemented Print() function * mbase/MParContainer.[h,cc]: - in Read set name of object to argument name if argument!=NULL - reordered some checks for Method calls * mdata/MDataFormula.cc: - fixed a problem with the replacement if using [?] for fits * mfbase/MFEventSelector2.cc: - replaced some +=1 and -=1 by ++ and -- * mfileio/MReadMarsFile.cc: - fixed a bug which caused Preprocess to crahs if instatiated with default constructor * mhbase/MH.cc, mhflux/MHEffectiveOnTime.cc: - use dynamic_cast if getting "stats" * mhflux/MAlphaFitter.cc: - small updates to output * mhflux/MHEnergyEst.cc: - fixed all axis lables - implemented fit of resolution - initialize fBias=0 in SetupFill - enhances Print() output * mjobs/MJCalibrateSignal.cc: - moved all tasks for interleaved calibration events to a third tasklist * mjobs/MJCut.[h,cc]: - implemented correct treatment of MC files - write resulting events to result file if no filename set - moved energy estimator behind cuts * mjobs/MJOptimize.cc: - changed RunEnergy such, that it can correctly treat MC files written by ganymed using wobble-mode * mbase/MStatusDisplay.cc: - fixed a possible crash in GetFullPad * mhbase/MBinning.[h,cc]: - implemented Copy Constructor * mhflux/MHCollectionArea.h: - call CalcEfficiency in Finalize * mhflux/MHEnergyEst.[h,cc]: - implemented GetWeights * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, mimage/MHImagePar.cc, mimage/MHNewImagePar.cc, mimage/MHVsSize.cc: - remove histograms from global directory if name was changed in Draw * mimage/MHVsSize.cc: - exhanged the arguments of TMath::Sign 2005/04/14 Thomas Bretz * Release 0.9.1 2005/04/14 Thomas Bretz * mjobs/MJCut.cc: - added MPointingPos to output 2005/04/13 Thomas Bretz * mbase/MStatusDisplay.[h,cc]: - implemented new Image types which can be written * mhbase/MBinning.[h,cc]: - added some more constructors which can set the binning directly * mhflux/MHEnergyEst.h: - added getter for fHEnergy * mhflux/FluxLinkDef.h, mhflux/Makefile: - added MHCollectionArea * mhflux/MHCollectionArea.[h,cc]: - added 2005/04/13 Daniela Dorner * datacenter/macros/fillcalib.C: - added update * datacenter/scripts/copyscript - fixed bug / changed path * datacenter/macros/setupdb.C - added table 2005/04/12 Daniela Dorner * datacenter/macros, datacenter/scripts: - added * datacenter/macros/buildsequenceentries.C, datacenter/macros/checkfileavail.C, datacenter/macros/doexclusions.C, datacenter/macros/fillcalib.C, datacenter/macros/filldotrbk.C, datacenter/macros/filldotrun.C, datacenter/macros/fillsignal.C, datacenter/macros/findcacofiles.C, datacenter/macros/getdolist.C, datacenter/macros/insertcacofile.C, datacenter/macros/insertdate.C, datacenter/macros/resetallruns.C, datacenter/macros/setstatus.C, datacenter/macros/setupdb.C, datacenter/macros/writesequencefile.C, datacenter/scripts/buildsequenceentries - added macros to do the automatic procedures in the datacenter * datacenter/scripts/checkfilesforsequenceavail, datacenter/scripts/copyscript, datacenter/scripts/correcttime, datacenter/scripts/doexclusions, datacenter/scripts/filesondisk, datacenter/scripts/fillcallisto, datacenter/scripts/runcallisto, datacenter/scripts/runstar, datacenter/scripts/writesequencefiles - added scripts to do the automatic procedures in the datacenter * automatic-exclusions.rc, steps.rc - added rc files for the automatic procedures 2005/04/12 Thomas Bretz * Makefile: - for the moment remove mhistmc from compilation * ganymed.cc: - return 2 when detecting wrong commandline argument * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - removed MEnergyEst (replaced by a simple MParameterD) * manalysis/MEnergyEstimate.[h,cc]: - replaced MEnergyEst by MParameterD - implemented Print() function - updated ClassVersion from 0 to 1 to allow storage of energy estimator * mbase/MStatusArray.[h,cc]: - overloaded DisplayIn to allow displaying a single tab - added some output if ObjectInCanvas not found * mbase/MStatusDisplay.[h,cc]: - enhanced Read() and Display() with the possibility to only read or display a single tab * mcalib/MCalibrateData.cc: - enhancements to logging output * mcalib/MCalibrationRelTimeCalc.cc: - some fixes to format of logging output * mfbase/MF.[h,cc]: - changed kAllowEmpty from a bit to the new datamember fAllowEmpty. This was necessary to allow storage of MF into files - changed ClassVersion from 0 to 1 * mhbase/MBinning.cc: - fixed SetEdgesRaw (lin, log, etc was ignored) * mhflux/MHAlpha.[h,cc]: - replaced MEnergyEst by MParameterD - renamed Theta to ExcessTheta - renamed Energy to ExcessEnergy - renamed Size to ExcessSize - renamed Time to ExcessTime * mhflux/MHEnergyEst.[h,cc]: - replaced MEnergyEst by MParameterD - implemented Print() function - some fixes to displaying the histograms. This makes sure, that no crashes happen, but unluckily it works correctly only with root 4.02/00 * mjobs/MJOptimize.[h,cc]: - implemented a AddPreCut taking a MFilter as argument - SetBit(kCanDelete) for all internal PreCuts - Print the result of the energy estimation after it was done * mranforest/MRFEnergyEst.[h,cc]: - replaced MEnergyEst by MParameterD * mfileio/MReadTree.cc: - shortened the output a bit when siwtching to the next file 2005/04/11 Thomas Bretz * manalysis/MMatrixLoop.[h,cc]: - implement option to divide matrix into two samples * mhflux/MHEnergyEst.cc: - changed to display projection of enegry resolution - fixed to use correct minimization value * mjobs/MJOptimize.[h,cc]: - implemented option to divide sample into test/train * mcalib/MCalibCalcFromPast.cc, mcalib/MCalibColorSteer.cc, mcalib/MCalibrationChargeCalc.cc, mhcalib/MHCalibrationCam.cc: - small updates to log-output * mhflux/MAlphaFitter.cc: - output scale-factor * mhist/MHCamera.cc: - as a workaround for a severe problem in gStyle->SetPalette when using the deep blue sea I have switched off this Platte for the moment 2005/04/08 Markus Gaug (2005/04/07) * mhcalib/MHCalibrationChargeCam.cc: - UNDOCUMENTED CHANGE: Do not call histlo.CreateFourierSpectrum() if IsOscillations() * mjobs/MJCalibrateSignal.cc: - UNDOCUMENTED CHANGE: Set SetOscillations(kFALSE) for hchacam, hbndcam, hrelcam * mhcalib/MHCalibrationRelTimeCam.cc: - fill array only if IsOscillations() is true. This is the case in all classes deriving from MHCalibrationCam, except for this one! The effect was that the interlaced calib. events occupied more and more memory becoming slower and slower because the option: SetOscillations(kFALSE) was not treated correctly. * mjobs/pedestalref_Dec04.rc - update the reference lines in the display according to the spline extractor. * mjobs/MJCalibration.cc - clarify a mis-leading histogram title * callisto_Dec04Jan05.rc: - UNDOCUMENTED CHANGE: use the pedestref_Dec04.rc as reference file. 2005/04/08 Thomas Bretz * mhbase/MH3.cc: - replaced all Float-histograms by double histograms. This is backward compatible with I/O and has the advantage, that we are compatible with most other double histograms used in Mars * mhflux/MHEnergyEst.cc: - made the energy binning the same than in all other classes * mreport/MReportStarguider.[h,cc]: - implemented new values from new starguider report as defined in TDAS00-07 V7.1 - Fixed the formerly wrong unit of fDevAz and fDevZd (unit now is arcmin) * mjobs/MJCalibrateSignal.cc: - first replaced contmc by a new filter Markus G. used, but after a discussion with Abelardo it turned out, that the original filter does a better job, becuase it takes both (level 1 trigger and minimum number of phes) conditions used in the MC into account. * mjobs/MJCut.cc: - added a plot: Effective-On-Time versus Theta used to produce a spectrum * mjobs/MJCalibrateSignal.cc: - removed condition IsUseBlindPixel() and IsUsePINDiode from setting filter and applied it to the corresponding task * mjobs/MDataSet.cc: - fixed a bug using the default paths 2005/04/07 Thomas Bretz * mpointing/MSrcPosCalc.cc: - also skip Process if fSourcePos==NULL, this happens in real data, too, if no pointing correction is done. * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - removed MParameterI, MParameterD, MParameterDerr * mbase/BaseLinkDef.h, mbase/Makefile: - added MParameterI, MParameterD, MParameterDerr * mbase/MParList.cc: - if a container is rejected due to wrong inheritance its inheritance is mentioned in the error message * mhbase/HBaseLinkDef.h, mhbase/Makefile: - removed MWeight * mhbase/MWeight.[h,cc]: - removed, replaced by MParameterD * mhbase/MFillH.[h,cc], mmontecarlo/MMcWeightEnergySpecCalc.[h,cc]: - replaced MWeight by MParameterD * mjobs/MJStar.cc: - fixed the wrong axis title in the histogram showing the rate * manalysis/MParameters.[h,cc]: - moved to mbase * mbase/MParameters.[h,cc]: - inherit MParameterDerr from MParameterD - changed class version of MParameterDerr from 1 to 2 * mfbase/MFEventSelector2.cc: - fixed that in SelectProb the wrong bin was chosen 2005/04/07 Markus Gaug (2005/04/06) * mjobs/calibrationref_Dec04.rc * callisto_Dec04Jan05.rc - update the reference lines in the display according to the spline extractor. * msignal/MExtractTimeAndChargeSpline.cc - move fgHiGainFirst from 2 to 0. This is important for the Dec. und January data where the calib. pulse position changes much. * mjobs/MJCalib.cc * mjobs/MJCalibration.cc - move fDevice and functions IsUseBlindPixel() and IsUsePINDiode() into the base class. * mjobs/MJCalibrateSignal.cc - do not apply the modified extraction window to the interlaced calibration events. This is a bugfix especially for the December and January data. - extract and fit blind pixel and pin diode only if flag IsUseBlindPixel() or IsUsePINDiode() is set. 2005/04/07 Markus Gaug (2005/04/03) * mcalib/MCalibrateData.cc - made one warning more understandable. * msignal/MExtractTimeAndChargeDigitalFilter.cc - moved fgOffsetFromLogain from -1.8 to -2.8. This corrects only an defective extraction of the MC at low-gain signals lower than 90 phes. 2005/04/07 Markus Gaug (2005/04/01) * mpedestal/MExtractPedestal.[h,cc] - use the standard way to define the default for fNumEventsDump - added missing "NumDump" in ReadEnv * callisto_*.rc - correct the default of the number of events used in pedestal calculation (NumEventsDump). - added missing lines for setting of parameters for the MJCalibrateSignal.PedCalcFromExtractRndm.* (CORRECTED SOME BUGS IN THIS LINES) - Replaced NumEventsDump by NumDump 2005/04/05 Thomas Bretz * mjobs/MSequence.cc: - fixed a bug in SetupDatRuns. P was setup instead of D * star.cc, mjobs/MJStar.cc: - fixed wrong setup of data-files * mjobs/pedestalref_Feb05.rc, mjobs/hilocalib_sp1.root, mjobs/hilocalib_sp1_mc.root: - added * mimage/MHillasCalc.[h,cc]: - implemented missing ReadEnv - DON'T KNOW WHERE IT WAS! argh... * mmc/MMcCorsikaRunHeader.h: - added Getter for fWobbleMode * mpointing/MSrcPosCalc.[h,cc]: - added detection of MC files and setting of source position according to wobble mode flag in MMcCorsikaRunHeader - fixed a bug in ReadEnv (wrong return statement) found by Abelardo. Correct handling of floating point numbers in the source position (12.5) was affected. 2005/04/04 Thomas Bretz * callisto.cc, sinope.cc, mjobs/MDataSet.[h,cc], mjobs/MJCalibTest.cc, mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, mjobs/MSequence.[h,cc] - changed setup procedure for paths to allow using standard paths everywhere - fixed to use new correct datacenter standard paths - made sure, that the sequences in a dataset are sorted by their number to ensure the correct synchronization * mhflux/MHAlpha.cc: - display correct error (excess/significance) * mjobs/MJCalibrateSignal.cc, mjobs/MJPedestal.cc: - removed MPointingPosCalc from Tasklist * mjobs/MJStar.cc: - added MPointingPosCalc to tasklist for "Events" in case of MC * ganymed.cc, mjobs/MJCut.[h,cc]: - implemented an option to enhance the display - do not display FS plot in wobble mode - made sure files are not written when they should not be written * mhflux/MHAlpha.[h,cc]: - let FitEnergyBins return the mean of the significance of all Energy Bins * mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, mimage/MHImagePar.cc, mimage/MHNewImagePar.cc: - implemented or fixed implementation of "same" Draw-option - slightly modified binning for Dist in MHHillasSrc * mjobs/MJCalibrateSignal.cc: - do not plot pulse time twice * mjobs/MJOptimize.cc: - print all parameters in minuit after they have been setup 2005/04/01 Thomas Bretz * mbadpixels/MBadPixelsCalc.cc: - switched on bad pixel detection for a pedestal level which is more than 5 times the variance * mfbase/MF.cc: - when fixing the "Inverted" bit in ReadEnv don't print a message on the screen * mhflux/MHAlpha.cc: - plot correct errors - do not plot the point if its significance is not greater 1 2005/03/29 Markus Gaug * mcalib/MCalibColorSet.cc: - added runs 34814, 34815, 45493, 45502, 45525, 45537 and 45548 2005/03/29 Thomas Bretz * ganymed.cc: - implemented cmdline option for wobble and no-wobble to overwrite dataset - added cmdline option to print dataset * mbase/MEvtLoop.[h,cc]: - added some memory leak analysis to eventloop * mbase/MStatusDisplay.[h,cc]: - added third part to status bar which displays the current memory usage - added some more sizes to menu bar - replaced SetStatusLine1/2 by calling a common SetStatusLine - added a delete to CloseWindow() to be able to close a static window. REMARK: This gives a hell of warnings in valgrind but it is currently the only option to get this working which is really annoying * mhbase/MH.cc: - small simplification * mhbase/MHMatrix.cc: - replaced IsValid() by a check for the number of Rows, this was necessary because in root 4.02/00 all matrices seems to be valid * mhflux/MHAlpha.cc: - changed the number of default bins in energy - make sure that the Alpha plot for off-data is displayed with a minimum at 0 - fixed TPad::Divide for root 4.02/00 * mhflux/MHEnergyEst.cc: - use the mean abs of the resolution as fit value - some fixed to graphics - fixed the TPad::Divide for root 4.02/00 - for the moment removed the pad added to the list of cleanups to get rid of the crashes * mhflux/MHFalseSource.cc: - fixed for root 4.02/00 which seaqrches in the current pad for the histogram when calling Project3D - fixed the TPad::Divide for root 4.02/00 * mhist/MHHadronness.[h,cc]: - use MParameterD instead of MHadronness * mimage/ImageLinkDef.h, mimage/Makefile: - added MHVsSize * mimage/MHHillas.cc: - implemented 'same' for Center-histogram * mhflux/FluxLinkDef.h, mhflux/Makefile: - added MHEnergyEst * mhflux/MAlphaFitter.[h,cc]: - added significancetimes log10(excess) as fit option * mjobs/MDataSet.[h,cc]: - added wobble-mode option * mjobs/MJCut.cc: - changed default binning for energy - added MHillasSrcAnti optionally to the output - added MHVsSize to the tabs which are shown * mjobs/MJOptimize.[h,cc]: - added dummy parameters to FixParameter for compatibility with SetParemeter - replaced MFSupercuts by MFMagicCuts - use Energy in MHAlpha instead of size * mbase/MFilter.[h,cc]: - implemented ReadEnv to treat "Inverted" * mfbase/MF.[h,cc], mfilter/MFSupercuts.cc: - treat "inverted" with MFilter::ReadEnv * manalysis/MCompProbCalc.[h,cc], mranforest/MRanForestCalc.[h,cc]: - replaced MHadronness by MParameterD * mdata/MDataFormula.[h,cc]: - removed comments from SetVariables - replaced GetExpFormula by GetTitle * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - MHadronness removed * mfilter/MFMagicCuts.[h,cc]: - added * mfilter/FilterLinkDef.h, mfilter/Makefile: - added MFMagicCuts * mjobs/Makefile, mjobs/JobsLinkDef.h: - removed MJExtractSignal * mfbase/MF.cc: - fixed a problem with double-inversion in ReadEnv * mpointing/MSrcPosCalc.cc: - removed an output line which showed only an empty container 2005/03/24 Thomas Bretz * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, readraw.cc, showlog.cc, showplot.cc, sinope.cc, star.cc: - replaced all returns of -1 by return 2 * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - added MEnergyEst (container) * mhflux/MAlphaFitter.[h,cc]: - implemented new fit result options 2005/03/23 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc - fix a bug in the time fine adjustment * mjobs/hilocalib_*_mc.root - high-gain low-gain intercalibration constants for the MC. * mjobs/MJCalibration.cc - use the MC- intercalibration files for MC. 2005/03/23 Thomas Bretz * mhcalib/MHCalibrationChargeCam.cc: - fixed a possible crash in DrawDataCheckPixel() if pix.GetGraphEvents() returns NULL 2005/03/23 Thomas Bretz * Release 0.9 2005/03/23 Thomas Bretz * ganymed.cc: - implemented wobble-mode option * mhflux/MAlphaFitter.[h,cc]: - fixed a problem in wobble mode (number of on- minus number of off-entries where calculated as 0) - added some additional resource options for scaling - added some missing const-qualifiers * mhflux/MHAlpha.cc: - some cosmetic change to output * mjobs/MDataSet.[h,cc]: - added the possibility to add a source name for wobble mode (preliminary) - added reading from *.edb catalog * mjobs/MJCalibTest.cc, mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, mjobs/MJPedestal.cc: - replaced iter.Print("all") by iter.Print() * mjobs/MJCut.[h,cc]: - implemented wobble mode - implemented getting source position * mjobs/MJStar.cc: - switched off calculation of MConcentration - implemented the new debug option for files (was still missing in MJStar) * mpointing/MSrcPosCalc.[h,cc]: - always writa the anti-source position into the parameter list, too - implemented wobble mode (exchange source and anti-source position) * mjobs/Makefile, mjobs/JobsLinkDef.h: - added MJOptimize * mfilter/MFSupercuts.[h,cc]: - added * mfilter/Makefile, mfilter/FilterLinkDef.h: - added MFSupercuts - removed MFAlpha * manalysis/Makefile, manalysis/AnalysisLinkDef.h: - removed MEnergyEst - removed MEnergyEstParam - removed MEnergyEstParamDanielMkn421 - removed MSupercuts - removed MSupercutsCalc - removed MFindSupercuts - removed MMinuitInterface - removed MFiltercutsCalc * mhist/Makefile, mhist/HistLinkDef.h: - removed MHEnergyTime - removed MHEnergyTheta - removed MHAlphaEnergyTime - removed MHAlphaEnergyTheta - removed MHThetabarTime - removed MHThetabarTheta - removed MHGamma - removed MHSigmaPixel - removed MHSigmabarTheta - removed MHOnSubtraction - removed MHFindSignificance - removed MHCT1Supercuts * mhflux/Makefile, mhflux/HistLinkDef.h: - added MHEnergyEst 2005/03/22 Thomas Bretz * mjobs/MJCalibTest.cc, mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, mjobs/MJPedestal.cc: - added a possibility to print the files which are searched/found if the files doesn't match the sequence * mjobs/MJPedestal.cc: - undocumented(!) change, changed fgExtractWinLeft from 3.5 to 2.5 * mimage/MHillas.cc: - fixed a bug which took unused pixels into account introduced errornously with the last change to MSignalCam 2005/03/21 Thomas Bretz * mfbase/MFDataChain.cc: - fixed a bug in GetDataMember if fData is not valid * mhbase/MH3.cc: - moved drawing histograms back to Draw. This fixes a problem with root 4.02/00. Reading/Writing should be no problem if the names of the profiles are well known. - with this fix 'same' is currently NOT supported * mimage/ImageLinkDef.h, mimage/Makefile: - added MNewImagepar2 - added MHCewImagePar2 * mimage/MNewImagePar2.[h,cc], mimage/MHNewImagePar2.[h,cc]: - added new classes calculating and displaying the length of the border line of a shower * mimage/MHImagePar.cc: - fixed a problem with root 4.02/00 when setting the margin in Divide to 0 by setting it to 1e-10 * mimage/MHNewImagePar.[h,cc]: - fixed to display Areas in deg^2 * mimage/MHillas.cc, mimage/MHillasExt.cc, mimage/MHillasSrc.cc, mimage/MImagePar.cc, mimage/MNewImagePar.cc - a small fix to Print() * mimage/MHillasCalc.[h,cc]: - added MNewImagePar2 to supported image parameters * mjobs/MJStar.cc: - replaced MCerPhotEvt by MSignalCam * msignal/cosmics_weights46.dat, msignal/calibration_weightsUV46.dat, mjobs/hilocalib_df46.root: - added new intercalibration file for digital filter 4sl higain and 6sl logian * mbase/MLogHtml.cc: - fixed a bug in Underline which cause a crash if fOut==NULL - output a message if file cannot be opened * mhcalib/MHCalibrationPulseTimeCam.cc: - for some output there was a replacement of pix.GetPixId() by hist.GetName() * mimage/MHillas.[h,cc]: - added new member function GetBorderLine returning the border line correspondig to an ellipse with axis lnegth and width - added new member function GetArea returning the area correspondig to an ellipse with axis lnegth and width 2005/03/19 Markus Gaug * mjobs/hilocalib_df46.root - added new intercalibration file for digital filter 4sl higain and 6 slices logain * mjobs/MJCalibration.cc - exchanged intercalibration file from hilocalib_df_4.root to hilocalib_df46.root - do not apply hi-gain lo-gain intercalibration for MC files. * mjobs/MJPedestal.cc - exchanged two (Int_t)'s by TMath::Nint(). - undocumented(!) change to the calculation of the extraction range (PulsePosCheck) * callisto.rc - exchanged default weights file for Digital filter from cosmics_weights4.dat to cosmics_weights46.dat and from calibration_weights_UV4.dat to calibration_weights_UV46.dat! This change is absolutely necessary, given the new results from Nuria about the signal resolution in the low gain which gets worse than the intrinsic Poisson jitter above 350 phes. Also the time resolution is too bad. This was not known before we had the correct low-gain MC pulse. 2005/03/18 Thomas Bretz * Makefile: - removed mone from list of compiled programs * mars.cc: - replaced the MARS display by the Camera Display directly * manalysis/MCameraData.[h,cc], mcalib/MCalibrateData.[h,cc], mbadpixels/MBadPixelsTreat.[h,cc], mcalib/MCalibrateRelTimes.[h,cc], mimage/MCameraSmooth.[h,cc], mimage/MConcentration.[h,cc], mimage/MHillas.[h,cc], mimage/MHillasExt.[h,cc], mimage/MImgCleanStd.[h,cc], mimage/MNewImagePar.[h,cc], mimage/MImagePar.[h,cc], MNewImagePar.[h,cc], mjobs/MJCalibTest.cc, mhcalib/MHCalibrationTestCam.[h,cc], mpedestal/MPedPhotCalc.[h,cc], mjobs/MJCalibrateSignal.cc: - removed dependancy on MArrivalTime, information now found in MSignalCam - replaced MCerPhotEvt by MSignalCam - it was renamed because it will be completely incompatible anyhow * mjobs/MJCalibrateSignal.cc: - use new MSignalCam type to display pulse position of cosmics * mcalib/MCalibrateData.cc: - calculate number of saturated pixels * manalysis/MCerPhotEvt.[h,cc]: - removed possibility for zero-supression. Now the index is identical with the position in the array - renamed and moved to msignal/MSignalCam.[h,cc] * manalysis/MCerPhotPix.cc: - removed obsolete values - added arrival time - renamed and moved to msignal/MSignalPix.[h,cc] * mcalib/MCalibrationChargeCalc.cc: - some cosmetic changes and small fixed from the Munich cvs (undocumented) * mfileio/MWriteRootFile.cc: - fixed bug in RecursiveRemove which caused crashed with real data * mhft/MGeomCamMagicEnhance.cc, mhft/MHexagonalFTCalc.cc: - updated, but untested * mhist/MHCamEvent.[h,cc]: - some fixes in Draw to get a correct display in root 4.02/00 (at least on 64-bit systems) - removed kSqrtVariance it is included in kProfile now * mhist/MHCamera.[h,cc]: - removed sqrtvariance option which is included in profile now - the profile now uses the new array fBinEntries to display a more accurate profile * mhist/MHEvent.cc: - set to type 6 for arrival times * mimage/MHillasCalc.cc: - updated text for error=1 * mimage/MImagePar.cc: - copy number of saturated pixels from MSignalCam * mjobs/MJStar.cc: - enhanced title of some histogram * mjobs/MSequence.cc: - updated path to fit data center (D.Dorner) * mmain/MEventDisplay.cc: - display Arrival Time from MSignalCam now * msignal/MArrivalTimeCam.cc: - implemented a new case 6 which is identical with the default case AND arrival time from MSignalCam * manalysis/Makefile, manalysis/AnalysisLinkDef.h, manalysis/: - removed MCerPhotEvt - removed MCerPHotPix - removed MCerPhotAnal - removed MCerPhotAnal2 - removed MCerPhotCalc * mimage/Makefile, manalysis/ImageLinkDef.h: - removed MHillasSrcCalc * manalysis/MSupercutsCalc.cc: - removed an obsolete include * mhist/Makefile, mhist/HistLinkDef.h: - removed MHSigmaTheta * mmain/Makefile, mmain/HistLinkDef.h: - removed MDataCheck - removed Mars - removed MAnalysis - removed MMonteCarlo - removed MGDisplayAdc - removed MOnlineDisplay - removed MOnlineDump * msignal/Makefile, msignal/HistLinkDef.h, msignal/: - added MSignalCam - added MSignalPix - added MSignalCalc * msql/Makefile, msql/SqlLinkDef.h: - removed MSqlInsertRun * mfilter/Makefile, mfilter/FilterLinkDef.h: - removed MFSelBasic - removed MFSelStandard - removed MFSelFinal 2005/03/17 Thomas Bretz * callisto.cc: - added new option moon - use light condition from MSequence to determin light condition automatically * mjobs/MJPedestal.h: - allow setting SetUseHists also to kFALSE * mjobs/MSequence.[h,cc]: - added fLightCondition * mcalib/MCalibrateData.cc: - undocumented change from Markus Gaug * mfilter/MFCT1SelBasic.[h,cc], mfilter/MFCT1SelStandard.[h,cc], mfilter/MFCT1SelFinal.[h,cc]: - moved to manalysisct1 * mfilter/Makefile, mfilter/FilterLinkDef.h: - removed MFCT1SelBasic - removed MFCT1SelStandard - removed MFCT1SelFinal * manalysis/Makefile, manalysis/AnalysisLinkDef.h: - removed MPad - removed MMakePadHistograms - removed MSigmabar - removed MSigmabarParam - removed MSigmabarCalc * mimage/Makefile, mimage/ImageLinkDef.h: - removed MImgCleanTGB * mmontecarlo/Makefile, mmontecarlo/MonteCarloLinkDef.h - removed MMcEnergyEst - removed MMcTimeGenerate * msignal/Makefile, msignal/SignalLinkDef.h: - removed MArrivalTime - removed MArrivalTimeCalc - removed MArrivalTimeCalc2 * mjobs/MJCalibration.cc: - followed some undocumented changes from the other cvs 2005/03/16 Thomas Bretz * callisto.cc: - set changed extractor in MJCalibrateSignal from MJPedestal - don't process 'range finding' for MonteCarlo data * callisto.rc: - removed obsolete Modified* option * mjobs/MJCalibrateSignal.[h,cc]: - removed obsolete flag for ModifiedExtractWin - allow also NULL for SetExtractor - rearanged the too MWriteRootFile instantiations otherwise callisto crashes in MWriteRootFile::ChangeFile - removed some obsolete comments about an old MC workaround * mdata/MDataChain.cc: - fixe to allow sign after e (eg. 1e-3, 1e+5 instead of 1e3, 1e5) * mcalib/MCalibColorSet.cc, mcalib/MCalibrationChargeCalc.cc, mhcalib/MHCalibrationCam.cc: - undocummented change 2005/03/16 Markus Gaug * msignal/MExtractTimeAndChargeSlidingWindow.cc - fixed a bug in the reading of the resource file (reading of the MExtractTimeAndCharge resources was skipped). * mcalib/MCalibrateData.cc - for the case that the high-gain saturates, but the low-gain signal could not be extracted successfully, take the high-gain signal, multiplied by 1.5 (before, 0 was taken erroneously). * msignal/MExtractTimeAndCharge.cc - catch one potential case for memory leaks in the low-gain calculation. Extract low-gain only if the remaining extraction window is not smaller than the number of slices needed by the signal extractor. - set the default fgLoGainStartShift to -3.5 * msignal/MExtractTimeAndChargeSpline.[h,cc] * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - adjust fLoGainStartShift by one slice, after findings from MC. 2005/03/15 Markus Gaug * msignal/MExtractTimeAndChargeSpline.h - take fRandomIter out of the streamer. - take fRiseTimeLoGain and fFallTimeLoGain into the streamer. - raise version number to 4 * mjobs/MJCalibration.cc - set default to kFALSE for PIN Diode or Blind Pixel calibration (was kTRUE by error). 2005/03/15 Thomas Bretz * mjobs/MJCalibrateSignal.[h,cc]: - added the fExtractor data member - added a destructor deleting it - only read extractor from file if not set by user - user fExtractor as extractor1 - do not delete extractor1 if set by user - added member function to set extractor * mjobs/MJPedestal.cc: - removed MFEventSelector workaround again - do not write pedy file anymore * callisto.cc: - MJCalibrateSignal now takes the signal extractor directly instead of taking the long way round a new file * mpedestal/MExtractPedestal.cc: - ReInit extractor correctly. Now the workaround should be really obsolete * mbase/MGMenu.[h,cc]: - make fix fix also compile root 3.10.02 2005/03/14 Thomas Bretz * mbase/MGMenu.h: - added a fix for root 4.02.00 2005/03/14 Markus Gaug * mcalib/MCalibrateData.cc - catch the case that now high-gain low-gian intercalibration const. is available. * mjobs/MJPedestal.cc - modify option for pedy*.root: from UPDATE to RECREATE 2005/03/11 Markus Gaug * callisto.rc - changed default weights for DF to cosmics_weights4.dat. (This has turned out to be the most stable set of weights). * mjobs/MJCalibration.cc - some cosmetic changes in the output - in case of WriteHists(), do not overwrite existing signal*.root file, but append histograms (bugfix!) 2005/03/10 Toni Coarasa (With Nadia's and Alessandro's inside) * mjobs/MJCut.cc - inclusion of (TString) to avoid compiler error under 2.95.3 * sinope.cc - inclusion of to avoid compiler error under 2.95.3 2005/03/10 Markus Gaug * msignal/MExtractTimeAndCharge.cc - set fgLoGainStartShift to -4.0 - put a check to avoid a dynamic low-gain range < 0 (should not occur with current extractors, but one never knows...) * msignal/MExtractor.[h,cc] - introduced Clear()-function, used in SetRange() * mjobs/MJCalibrateSignal.cc - changed order of initialization of the 2 MWriteRootFiles whereupon the crash goes away. Have to revise the /dev/null work-around in MWriteRootFile! 2005/03/09 Markus Gaug * msignal/MExtractTimeAndCharge.cc - catch a (very unprobable) case in which the low-gain range could be negative * mjobs/MJCalibrateSignal.cc - modify writing of MCalibrationPulseTimeCam to disk in order to avoid program crash in the destructor of MJCalibrateSignal * mhcalib/MHGausEvents.h - take fGraphEvents, fGraphPowerSpectrum, fHPowerProbability and fPowerSpectrum out of the streamer. - intialize fFlags to 0 2005/03/09 Thomas Hengstebeck * mranforest/MRFEnergyEst.cc - changed call of min, max functions to TMath::Min() and TMath::Max() to avoid compilation problems with some gcc versions - changed check of energy rule (last col of MHMatrix) so, that any rule containing "fEnergy" is accepted. 2005/03/08 Markus Gaug * mhcalib/MHPedestalCam.[h,cc] - introduce new parameter "fFitStart" to decide from outside where to start fitting the pedestals. 2005/03/07 Markus Gaug * mjobs/hilocalib_df6.root * mjobs/hilocalib_sp2.root - two files with the high-gain vs. logain intercalibration results. for Digital filter and September data and Spline and December data. * callisto.rc - allow setting the variables ExtractWinLeft and ExtractWinRight. * mhcalib/MHCalibrationHiLoCam.h * mhcalib/MHCalibrationCam.h * mhcalib/MHGausEvents.h - put the Draw-functions into the *MENU* * mjobs/MJCalibration.[h,cc] - introduced reading of hi-vs.logain calibration file * mjobs/MJPedestal.[h,cc] - modified range setting according Thomas S. suggestions * msignal/MArrivalTime.[h,cc] - took out some commented code which will not be used any more - improve Print() function 2005/03/05 Markus Gaug * msignal/MExtractTimeAndChargeSpline.[h,cc] - removed the obsolete parts of "kMaximum" and "kHalfMaximum" in the code which were still persistent - set default extraction type to integral (instead of amplitude) - set version number to 3 * mcalib/MCalibrationChargeCam.[h,cc] - added new function GetAvergedConvFADC2PhePerArea for the datacheck * mjobs/MJPedestal.[h,cc] - added function WriteExtractor which writes the extractor with the new ranges to disk if fPulsePosCheck has been selected. * mjobs/MJCalibrateSignal.[h,cc] - added functionality to read the updated extractor from MJPedestalY2 (with the new extraction ranges). 2005/03/04 Abelardo Moralejo * mmc/MFadcDefine.h - Changed constant SUBBINS from 5 to 500. This defines the resolution of the analog signal simulation in the camera MC. The time step is the duration of one FADC slice divided by SUBBINS. The change was necessary to implement correctly the PMT time jitter. 2005/03/03 Markus Gaug * mjobs/pedestalref.rc * mjobs/calibrationref.rc * mjobs/calibrationref_Nov04.rc - added documentation * mjobs/signalref.rc - added * mjobs/MJPedestal.cc - re-added MFEventSelector which had been removed by TB on the 15.2.2005. - added pulse position selector, as decided at the Berlin soft- ware meeting. * callisto.cc - added SetPulsePosCheck() in MJPedestalY2 * mjobs/MJCalibrateSignal.cc - updated pulse pos. calculator, can be switched off now. * mjobs/MJCalib.[h,cc] - added flag fPulsePosCheck 2005/03/02 Markus Gaug * mjobs/MJCalib.[h,cc] * mjobs/MJPedestal.[h,cc] * mjobs/MJCalibration.[h,cc] * mjobs/MJCalibrateSignal.[h,cc] - put the storage types in the base class * mbadpixels/MBadPixelsCam.cc - add some output in case that AsciiRead does not work * msignal/MExtractTimeAndChargeSpline.cc - speed integration up a little bit. * callisto.rc - adapt the low-gain stretch for the different pulse form for calibration and cosmics pulses (only applied if spline is used). 2005/02/25 Markus Gaug * mhcalib/MHCalibrationHiLoCam.[h,cc] - fixed bug in inter-calibration hi-logain for arrival times. * mhcalib/MHCalibrationPulseTimeCam.[h,cc] - fixed the situation where the maximum bin is already found in the low-gain samples. * mjobs/MJCalibration.cc - write the MPedestalCams also to disk (needed for data-check). 2005/02/25 Abelardo Moralejo * msignal/MC_calibration_weights_UV.dat - Added. Weights file for using the digital filter on MC calibration files. For the moment the weights are the same as in the file calibration_weights_UV.dat, only that high and low gain have both the same weights because for the moment the MC pulse shape is the same in both gain branches. 2005/02/24 Markus Gaug * mjobs/MJCalibrateSignal.cc - include display of pulse times (calculated in the post-process) - include the possibility for the pixel check (like in MJCalibration) * mhcalib/MHCalibrationHiLoCam.cc - set default range up to 30. * mhcalib/MHCalibrationChargeBlindPix.h - take the TVectors out of the streamer, to be exectuable with root.04.02 2005/02/24 Thomas Hengstebeck * macros/RFEnergyEst.C - new macro to show the usage of RFEnergyEst class. 2005/02/24 Abelardo Moralejo * mtemp/mpadova/macros/resize.C - moved MSrcPosCam output container from RunHeaders to Events tree. 2005/02/18 Marcos Lopez * mflux/ - new directory to store the flux related classes. * mflux/MHadAlphaCut.{h,cc} - container to store the optimal hadronness and alpha cut for each bin in estimated energy and theta. * mflux/MFHadAlpha.{h,cc} - filter to apply the hadronness and alpha cuts stored in MHadAlphaCut. It can be selected to apply only alpha, only hadronness cut or both. 2005/02/18 Markus Gaug * mhcalib/MHCalibrationPulseTimeCam.[h,cc] - new class to histogram the arrival time of cosmics above a certain threshold. * mcalib/MCalibrationPulseTimeCam.[h,cc] - new class container with results of MHCalibrationPulseTimeCam * mjobs/MJCalibrateSignal.cc - include MCalibrationPulseTimeCam to display 2005/02/18 Thomas Bretz * mbase/MStatusDisplay.cc: - switch off TH1::AddDirectory during DrawClonePad * mjobs/MSequence.[h,cc]: - added some code (still commented) for later use, allowing to setup a different filename for each runfile - added SetNight member function - added Add*Runs member function - with this changes MSequence can replace MRunIter now - allow requesting of standard path from outside (GetStandardPath) * Makefile: - added sinope * sinope.cc: - added (small tool to check contents of run for datacenter) * callisto.cc: - added background information about Callisto * ganymed.cc: - added background information about Ganymed * mjobs/MJCalibrateSignal.cc: - removed special MC code. The MC files now have a lo-gain switch and we can extract the pedestal rms from lo-gain - don't print statistics if nothing was executed - fixed display. The displayed pedestal RMS was the one caluclated with a extractor but not at random position (This only effects the display, the algorithm was ok) 2005/02/17 Markus Gaug * mjobs/MJCalibTest.cc - removed bug treating the MC calibration files uncorrectly - added Pixel-Check treatment * mjobs/MJCalibration.cc - added Pixel-Check treatment * callisto.rc - added pixel-check option * msignal/MExtractTimeAndChargeDigitalFilter.cc - calculate high-gain signal even if saturation occurs 2005/02/17 Thomas Bretz * mjobs/MJStar.cc: - fixed some missing containers in case of MC files * callisto.cc: - removed obsolete second check for kModeC * mars.rc: - added a lot of option to be able to use a different signal extractor looking into uncalibrated data * manalysis/MCameraData.[h,cc]: - added Print() member function * manalysis/MCerPhotAnal2.[h,cc]: - switched off writing into MCerPhotEvt * mdata/MDataChain.[h,cc]: - added code to handle priorities of operators correctly * mhist/MHEvent.cc: - fixed display for MPedestalRMS * mjobs/MJCalib.cc: - fixed treatment of PixelCheck resource * mjobs/MJCalibrateSignal.cc: - added some comments about Monte Carlo - added MMcFadcHeader to output * mjobs/MJPedestal.cc: - do not allow 'UseData' for Monte Carlos. Reason is given as comment in the code * mmain/MEventDisplay.[h,cc]: - changed such, that mars.cc allows to set the used extractor - removed the obsolete cam.root, ped.root option * mmain/MCameraDisplay.cc: - adapted to change in MEventDisplay 2005/02/16 Javier Rico * mhistmc/MHMcUnfoldCoeff.[cc,h], mhistmc/Makefile, mhistmc/HistMcLinkDef.h - Added container class holding the histograms of the coefficients for the (iterative) unfolding. * mmontecarlo/MMcUnfoldCoeffCalc.[cc,h], mmontecarlo/Makefile, mmontecarlo/MonteCarloLinkDef.h - Added task class to compute the coefficients for the (iterative) unfolding. * macros/unfoldCoeff.C - added macro that computes the effective areas and coefficients from a MC input file (with OriginalMC tree and MEnergyEst branch containing the energy estimator). This may be used as layout for spectrum computation program. 2005/02/16 Markus Gaug * mdata/MDataChain.cc - replaced ROOT version check for the compiler from 4.02.00 to 4.01.00 * mranforest/MRFEnergyEst.cc - include "TVector.h", otherwise this class does not compile in newer root versions * msignal/MExtractTimeAndCharge.cc - initialize fLoGainStartShift correctly if read from conf. file and modified fOffsetLoGain exists. * msignal/*weights*.dat - new weights with the uniform pedestal RMS. (Please use these!) * msignal/pulpo_weights*.dat - new weights with the pulpo-pulse form and without NSB!! 2005/02/16 Thomas Hengstebeck * mranforest/MRFEnergyEst.[h,cc] - added RF class for energy estimation * mranforest/MRFEnergyEst.cc - changed calculation of estimated energy, now interpolated values are returned 2005/02/16 Abelardo Moralejo * macros/starmc2.C: - Changed the way in which the "OriginalMC" tree is copied from the input to the output file. Now we ise the new procedure MWriteRootFile::AddCopySource * mhistmc/MHMcCollectionArea.cc - Changed default fName to "MHMcCollectionArea" * mtemp/mpadova/macros/resize.C - Changed weights 2005/02/16 Thomas Bretz * mbase/MEvtLoop.cc: - fixed a typo * mbase/MParList.cc, mfileio/MReadMarsFile.cc, mfileio/MReadTree.cc, mfileio/MWriteRootFile.cc, mjobs/MJStar.cc: - optimized size of some output * mfileio/MWriteRootFile.[h,cc]: - fixed CopySource option for single-file case * mhist/MHCamEvent.cc: - replaced the warn in SetupFill by an inf * mhcalib/MHCalibrationCam.cc, mhcalib/MHCalibrationHiLoCam.cc, mhcalib/MHCalibrationChargePINDiode.cc: - removed obsolete output after a failed FindCreateObj (the function itself does the output in case of failure) * mhcalib/MHCalibrationCam.cc: - replaced 'err' by 'warn' for under-/overflow in lo-gain pixel, it doesn't result in an fatal error (abort) * mranforest/MRanForestCalc.cc: - added a missing debug level to some output * mranforest/MRFEnergyEst.[h,cc]: - cleaned up includes * callisto.cc, ganymed.cc, star.cc: - implemented enhanced handling of resource debugging * mbase/Makefile, mbase/BaseLinkDef.h: - added MEnv * mbase/MEnv.[h,cc]: - added * mjobs/MJob.[h,cc]: - added new function to allow distribution of extranl MEnv - replaced Bool_t by Int_t for fEnvDebug * mjobs/MJPedestal.cc: - adapted to changes of EnvDebug 2005/02/15 Abelardo Moralejo * macros/mccalibrate.C - fixed small bug * mmontecarlo/MMcCollectionAreaCalc.[h,cc] * mhistmc/MHMcCollectionArea.[h,cc] - Changed the way of calculating final effective area for data analysis. The new approach requires the use of MC files produced with the current CVS version of camera. We now make use of the true total number of produced MC events, and allow for the setting of a "tentative" differential gamma spectrum to be used in the calculation of effective areas. Removed unused constructor argument "input" in MMcCollectionAreaCalc. * macros/collarea.C - Adapted to the new way of calculating effective areas. 2005/02/15 Thomas Bretz * callisto.rc: - replaced mutal exclusive options (Integral, Amplitude) by a one-line resource * msignal/MExtractTimeAndChargeSpline.cc: - replaced mutal exclusive options (Integral, Amplitude) by a one-line resource "ExtractionType" (old code still works) * manalysis/MCerPhotEvt.[h,cc]: - added new variables to store information about islands and removed pixels - PRELIMINARY - increased class version number * mfilter/MFSoftwareTrigger.cc: - optimized output in PostProcess * mimage/MHImagePar.[h,cc]: - added new histograms for new variables in MCerPhotEvt * mimage/MImagePar.[h,cc]: - added new data members for the new image parameters - increased class version * mimage/MImgCleanStd.[h,cc]: - adapted image cleaning to calculate the new image parameters - added a flag to keep single core pixels * manalysis/MMatrixLoop.[h,cc], mfileio/MReadReports.[h,cc], mfileio/MReadRflFile.[h,cc], mfileio/MReadTree.[h,cc], mraw/MRawFileRead.[h,cc], mraw/MRawSocketRead.h: - renamed GetFileName to GetFullFileName * mbase/MInputStreamID.h: - added new member function HasStreamId * mbase/MParContainer.[h,cc]: - added a static list to keep track of all created TMathodCall objects * mbase/MTask.cc: - enhanced PrintStatistics * mfileio/MRead.[h,cc]: - new abstract function GetFullFileName - added implementatio of GetFileName based on GetFullFileName * mfileio/MWriteRootFile.[h,cc]: - moved open of a new file to new common member function OpenFile - allow to use an already existing file also when using rules - added a new option which can be used to copy an existing tree (without any change) from the old file into the new file. (in principal you can also do this for some of its branches only) This is done by AddCopySource * mjobs/MJCalibrateSignal.cc: - in case of MonteCarlo files write an independant tree 'MonteCarlo' for 'MMcEvtBasic' * mjobs/MJStar.cc: - copy tree 'MonteCarlo' from old into new files * mjobs/MJPedestal.cc: - removed wrong use of MFEventSelector * mpedestal/MExtractPedestal.cc: - made sure that fExtractor is correctly pre- and postprocessed. * mbase/MTask.cc: - don't preprocess a task if it has been preprocessed already * mraw/MRawFileWrite.cc: - if display is set write output to status line * mfileio/MReadTree.cc, mfileio/MReadMarsFile.cc: - moved code to display filename in status display from MReadMarsFile::Notify to MReadTree::Notify 2005/02/15 Markus Gaug * mjobs/MJCalib.h - added GetDataFlag(), otherwise code does not compile! * mhcalib/MHCalibrationChargeCam.cc - moved default saturation limit for number of high-gain events from 0.02 to 0.05. * msignal/MExtractTimeAndCharge.cc - lowered default low-gain switch from 150 to 120. (for calibration events which saturate more than 5% of the events). * mjobs/MJCalib.[h,cc] - include possibility to display pixels distributions for test reasons 2005/02/14 Thomas Bretz * callisto.cc, ganymed.cc, star.cc: - added some more information to '--help' output - replaced MSequences by MDataSet - implemented new debugging options (maybe not perfect yet) --print-files and --print-found * mjobs/MJCut.[h,cc]: - replaced MSequences by MDataSet - write MEnergyEst - recalculate MHillasSrc - made sure both MWriteRootFile have different names - don't use "same" option if no off-data * mjobs/MSequences.[h,cc]: - removed * mjobs/MDataSet.[h,cc]: - added * manalysis/MEventRateCalc.[h,cc]: - added a fix which make sure, that the rate is not influenced too much by the start of data taking - fixed setting of mean time corresponding to rate-interval * mraw/MRawFileRead.[h,cc]: - calculate total number of events from all files in PreProcess * mcalib/MCalibConstCam.cc: - added case 2 to GetPixelContent * mjobs/MJCalibrateSignal.cc: - fixed redirection of stream with interleaved calibration infos - changed 'Arrival Time' to 'Calibrated Arrival Time' - display interpolated signal in equivalent photoelectrons to to get rid of scaling effects which makes it difficult to see details of the structure of the inner pixels in the histogram. With this you can immediatly see whether the relative number of phe in the outer pixels is equiv. to the inner pixels. - the same for the calibration factor - with the same argument - adapted to change in MWriteRootFile - use MReadMarsFile for Monte Carlo flag set * mhist/MHCamera.cc: - changed drawing such, that NaN is not displayed anymore * Makefile: - added new program ganymed * mfileio/MWriteRootFile.[h,cc]: - added possibility to use UPDATE mode with rules (dangerous!) as discussed with Abelardo, Daniel M. and Thomas S. * mjobs/MJStar.cc: - adapted to change in MWriteRootFile - added software trigger (still untuned) as suggested by Thomas S. - added calculation of source position before calculation of image parameters - added MPointingPos to Events-Tree - removed MPointingPos from Drive-Tree - renamed sub-tasklists to something more intuitive * mjobs/Makefile, mjobs/JobsLinkDef.h: - added MJCut.cc * mraw/MRawFileRead.cc: - return kERROR if ReInit fails * mfilter/MFSoftwareTrigger.[h,cc]: - updated to allow using time coincidence - changed default values - added a pattern independant trigger algorithm * mbase/MDirIter.cc: - implemented option 'dbg' in Print() * mjobs/MJCalib.h: - added a getter for data-flag (should be renamed to 'datatype' soon) 2005/02/12 Abelardo Moralejo * mtemp/mpadova/macros/wobblemap.C - Added. Macro to do some studies on wobble mode data. * macros/mccalibrate.C - Added option to divide the output in a train and a test sample. Included in output new container MMcEvtBasic (if found in input files) for later use in effective areas calculations. * macros/starmc2.C - Added writing out of new container MMcEvtBasic. Removed possibility of splitting output in train and test samples, since this has now to be done in mccalibrate.C to make possible that the tree OriginalMC containing MMcEvtBasic has all the original MC events (and only those) from which the events present in the Events tree derive. * macros/starmc.C - Changed a couple of wrong "." by "->" in function calls. Changed default tail cuts. 2005/02/12 Markus Gaug * msignal/MExtractTimeAndChargeSpline.cc - change default rise time to 0.5 and default fall time to 1.5 * callisto.rc - made intitializations of extractors more explicit * mpedestal/MExtractPedestal.cc - make check for even number of slices in the case of "fundamental" pedestal calc. * mcalib/MCalibrationChargeCalc.cc - take out some commented code * mjobs/MJCalib.h - removed GetDataFlag() 2005/02/12 Abelardo Moralejo * mmc/MMcTrig.hxx - Added getter GetNumFirstLevel. This is necessary if that data member is to be used for instance in MF filters. There was already a getter, but it is called GetFirstLevel and hence not recognized. 2005/02/11 Abelardo Moralejo * mmc/MMcEvtBasic.[h,cc]: - New class. Contains 5 very basic MC parameters which we intend to save for all generated Corsika events. This is needed for proper effective area calculations. * mmc/Makefile, McLinkDef.h - Added new class above. 2005/02/11 Thomas Bretz * mfileio/MWriteRootFile.[h,cc]: - added the possibility to write to an already existing file. This doesn't affect the old behaviour, but using this new feature might still have problems. * mfileio/MReadReports.cc: - fixed column-level in PrintStatistics * mjobs/MJCalibrateSignal.cc: - keep MMcRunHeader in the output 2005/02/10 Abelardo Moralejo * macros/mccalibrate.C - Added possibility to calibrate in photons or photoelectrons * macros/starmc2.C - Added comment about value of cleaning levels 2005/02/10 Markus Gaug * mcalib/Makefile * mcalib/CalibLinkDef.h * mcalib/MCalibrate.[h,cc] - removed mcalib/MCalibrate.* because it has been replaced by MCalibrateData * mmain/MEventDisplay.cc - replaced MCalibrate by MCalibrateData * mhcalib/MHCalibrationCam.cc - replaced warning about empty histogram from red (err) by yellow (warn). * mcalib/MCalibColorSet.cc - return kTRUE in case of MC-file * msignal/MExtractTimaAndChargeSpline.[h,cc] - make sure that all variables are set correctly independent on the order of their initialization by the user 2005/02/10 Thomas Bretz * mgeom/MGeomCam.[h,cc]: - added new member functions (GetNeighbors) to get all pixels around a given pixel with a given radius * mars.rc: - use same values for image cleaning as default in star * mpointing/MSrcPosCalc.[h,cc]: - added the possibility to set the Source position from a resource file * mjobs/MJStar.cc: - write MMcRunHeader to RunHeaders * mfileio/MWriteRootFile.cc: - removed an obsolete line - removed a debug line which should not be there * mimage/MHillas.h: - added new Getter GetDist0 returning the distance to the camera center * mhflux/MHFalseSource.cc: - the scaling in Paint() was nonsense in case we are looking at on/off-data. Fixed. 2005/02/10 Abelardo Moralejo * manalysis/MMcCalibrationUpdate.h - Added comment on new member fSignalType. Sorry for compilation problems... I forgot to commit the header yesterday, but M. Gaug did it. * macros/starmc.C - Cleaned up a little bit, made the option to choose between calibration in photons or phe- easier to set. * manalysis/MMcCalibrationUpdate.[h,cc] - Added getter and setter for fSignalType. Set fSignalType=kPhot as default for consistency with MCalibrateData. 2005/02/09 Abelardo Moralejo * manalysis/MMcCalibrationUpdate.cc - Updated to make the MC calibration in phe- work * macros/starmc.C - same as above. Now default is calibration in phe- * mraw/MRawEvtHeader.h - Added setter for the trigger pattern, absolutely needed for creating proper MC root files. 2005/02/09 Markus Gaug * manalysis/MMcCalibrationUpdate.h - added missing declaration of fSignalType * mjobs/MJPedestal.[h,cc] * mjobs/badpixels_0_559.rc * callisto.rc - allow exclusion of bad pixels from the beginning (default is Pixel 0 and 559). - removed some obsolete includes - took out data member fPedestalHist from MJPedestal.h which removes the crash, however I don't understand why it caused the crash!!! There seem to be problems with memory usage either in callisto.cc or in this class!! (valgrind shows several memory leaks in the TG... classes). * mjobs/MJCalibration.cc - write display and containers also in case of failure of eventloop * mhcalib/MHGausEvents.cc - make default display window 600x600 * mcalib/MCalibrationQECamMagic.cc - updated five pixels * mpedestal/MExtractPedestal.[h,cc] * mpedestal/MPedCalcPedRun.cc * mpedestal/MPedCalcFromLoGain.cc - included possibility for intermediate pedestal cam (not yet used) * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.cc - initialize the bad events counters to 0 also in constructor - release the limit for bad events a bit * mcalib/MCalibrationTestCam.h - take out include of TArrayI (already in base class) * mcalib/MCalibrateData.h - make default argument for SetSignalType kPhe. * mjobs/MJCalibrateSignalFromOuside.[h,cc] - removed 2005/02/08 Markus Gaug * mhcalib/MHCalibrationCam.cc * mcalib/MCalibrationChargeCalc.cc - replaced GetNumExecutions()==0 condition by GetNumExecution() < 1 2005/02/08 Thomas Bretz * mpointing/MPointingPosInterpolate.cc: - use debug option in addition to switch off output from internal eventloop. It is confusing having this output inside another eventloop. - updated missing connections in class description * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.cc: - made sure that output of PostProcess fits into 80col boundary * mimage/MHillas.cc: - removed an obsolete call to TLine::Paint() in Paint. 2005/02/07 Thomas Bretz * mbase/MFilter.cc: - use paranthesis around ClassName in GetRule * mdata/MDataFormula.h: - fixed a wrong comment in variable description * mhist/MHCamEvent.[h,cc], mhist/MHCamera.[h,cc], mjobs/MJCalibrateSignal.cc, mjobs/MJCalibrateSignalFromOutside.cc: - to make sure there are no missunderstandings we have to replace all occurances of 'Variance' by 'SqrtVariance' (it was not my decision) * mastro/MAstro.[h,cc]: - added new function Angle2Coordinate * mbase/MTaskEnv.[h,cc]: - fixed a bug which caused the resource task to be ignored if the default task was '' * mhbase/MH3.cc: - fixed a bug in Paint (use GetListOfPrimitives->FindObject instead of FindObject) which caused the histogram to be put a lot of times into the pad. * mjobs/MJCalib.[h,cc]: - derived MJCalib from MJob in order to be able to move common code from derived classes into the base-class - implemented CheckEnvLocal to handle the resource 'DataType' - changed publicity of some variables and functions to allow setting file type from outside - added new function to set data-type for use in callisto.cc * mjobs/MJCalibTest.[h,cc], mjobs/MJCalibrateSignal.[h,cc], mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.[h,cc]: - removed double inheritance, replaced by single inheritance from MJCalib - replaced code to handle the resource 'DataType' by the common code in the base class - put reading of reference file into a new member function to make source code reading resource file simpler and to be able to write a function description about it (simple copy&past) * callisto.cc: - added option for file-type * mjobs/MJOptimize.[h,cc], mjobs/MSequences.[h,cc], mjobs/MJCut.[h,cc], ganymed.[cc,rc], mhflux/MHEnergyEst.[h,cc]: - added to repository, but not yet to Makefile because there is still some work to be done. But whoever is interested in the new classes/program may already use it. * mhflux/MAlphaFitter.[h,cc]: - added option to choose the minimization value * mhflux/MHAlpha.cc: - replaced significance by minimization value * mhflux/MHEffectiveOnTime.cc: - use E-Option when fitting to improve error calculation by using Minos technique 2005/02/04 Markus Gaug * mjobs/MJCalibration.cc - found a "the `impossible' happened" when running callisto with a pure signal extractor --> MExtractTimeFastSpline has some problems with the management of the internal arrays. Replaced it by MExtractTimeHighestIntegral as default which is as good. * callisto.rc - use MExtractTimeAndChargeDigitalFilterPeakSearch as default instead of MExtractTimeAndChargeDigitalFilter. This extractor is now tested and checks for the positions of the pulse within the DAQ-window. 2005/02/04 Thomas Bretz * Makefile.rules: - fixed creation of main MDep.d * callisto.cc, merpp.cc, showlog.cc, showplot.cc, star.cc: - added commandline option --version * mbase/MFilter.cc: - changed default for 'GetRule' * mbase/MParContainer.cc: - simplified GetNewObject * mfbase/MF.cc: - if no conditional sign is found try to create MFilter-object * mraw/MRawEvtData.cc: - fixed the initialization of fABFlags in case maxid==0 which is the default. This caused MRawEvtPixelIter::HasABFlag to do unallowed access to memory for old root-files without the AB flag, because it assumed (due to size==1) that the data contains the ab flag * mraw/MRawEvtPixelIter.[h,cc]: - removed some obsolete debug comments - simplified HasABFlag * manalysis/MCerPhotPix.h: - removed the `!` again. It gave problems with the Mars display. We agreed that this is a minor problem because the structure of MCerPhot* will chnage soon in any case. 2005/02/04 Abelardo Moralejo * macros/starmc2.C - added to output missing container MConcentration. 2005/02/03 Thomas Bretz * mfbase/MFilterList.[h,cc]: - added new function AddToList(TCollection&) * mhbase/MFillH.cc: - print a warning if 'same'-option given without a corresponding existing tab * mhflux/MHAlpha.[h,cc]: - made time bins settable by user * mfileio/MWriteRootFile.cc: - fixed ReInit and a warning output when writing to memory 2005/02/03 Markus Gaug * mcalib/MCalibColorSet.[h,cc] - implement possibility to set colour explicitely (e.g. for MC). * msignal/MExtractTimeAndChargeDigitalFilter.cc - intialize fTimeShiftHiGain and fTimeShiftLoGain by default. * mjobs/MJPedestal.cc - in case, extractor is used, put the extractor into the tasklist, otherwise ranges do not get initialized correctly (wrong memory usage!). Use an event selector, however to not skip the Process. This is as fast as before and now safe for any kind of extractor * mcalib/MCalibrationCam.h * mcalib/MCalibrationTestCam.h * mcalib/MCalibrationTestCam.cc - initialize a missing array in InitAverageAreas * mraw/MRawEvtHeader.h - introduced Setter() of cal. pattern for Abelardo 2005/02/02 Markus Gaug * mcalib/MCalibrationChargeCam.cc - fixed small bug in the display of mean charges when low-gain was used. * msignal/MExtractor.cc - print the missing overlap between high-gain and low-gain in the Print() function - remove setting of fHiLoLast in PreProcess, otherwise cloned extractors do not work any more with windows exceeding the high-gain range. * mhcalib/MHCalibrationTestCam.[h,cc] * mhcalib/MHCalibrationTestTimeCam.[h,cc] - set proper probability limits for the fits * mcalib/MCalibrateData.cc - catch the case in which no interlaced cal. events are being sent by the pulser box. * mjobs/MJCalib.[h,cc] - put the data type enum in a new base class * mjobs/MJCalibTest.[h,cc] - re-name old class MJExtractCalibTest to MJCalibTest and make it compatible with the sequence-files. * mjobs/MJExtractCalibTest.[h,cc] - removed * mjobs/MJCalibrateSignal.cc - put a compiler warning about the default cal. to photo-electrons * callisto.cc - add new flag "--use-test" to enable the MJCalibTest facility (default: not used) 2005/02/01 Raquel de los Reyes * mjobs/MSequence.h - Added "Get" functions for the TArrays variables. 2005/02/01 Markus Gaug * mjobs/MJPedestal.[h,cc] * mjobs/MJCalibration.[h,cc] * mjobs/MJCalibrateSignal.[h,cc] * callisto.rc - put enum for data type. Can now set the data type (mc, raw, root) without running the data check. * mhcalib/MHCalibrationCam.cc - return kTRUE in PostProcess if GetNumExecutions is 0 * mcalib/MCalibrationChargeCalc.cc - return kTRUE in PostProcess if GetNumExecutions is 0 2005/02/01 Daniel Mazin * MPointingPosInterpolate.cc: - fixed bug to match the units of Ra and Decl in MPointingPos - fixed bug in handling of events with times outside of times from MDrive tree 2005/02/01 Thomas Bretz * showplot.cc: - another fix to make the batch mode working (you can use the batch mode to convert a root-file into another format) 2005/01/31 Thomas Bretz * mbase/MStatusDisplay.cc: - fixed handling of batch mode in GetCanvas(const TString &name) - don't skip already existing tabs in Display() 2005/01/31 Raquel de los Reyes * mjobs/MSequence.h - Added "Get" functions for some of the sequence.txt file parameters. 2005/01/31 Markus Gaug * mjobs/MJob.[h,cc] * mjobs/MJCalibrateSignal.[h,cc] * mjobs/MJCalibration.[h,cc] - move file type enum to base class * mjobs/MJCalibrateSignal.[h,cc] - allow also for direct setting of an MRunIter (not used in callisto). * mcalib/MCalibrationChargeCalc.[h,cc] - test also for pulser strength changes additionally to changes in colour. 2005/01/31 Abelardo Moralejo * mpointing/MSrcPosCalc.cc - Create only one instance of MAstroSky2Local for the transformations, instead of two identical ones, as it was before. 2005/01/30 Markus Gaug * mjobs/MJCalibration.cc * mjobs/MJPedestal.cc * mjobs/calibrationref_Nov04.rc * mhcalib/MHCalibrationRelTimeCam.[h,cc] - updated correct display of reference lines 2005/01/29 Markus Gaug * msignal/MExtractFixedWindowSpline.[h,cc] - fixed a bug occurring with overlapping windows between high-gain and low-gain * msignal/MExtractFixedWindowPeakSearch.cc - take out call to fSignals->Clear() which is already done in MTaskList. * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.[h,cc] - new extractor reducing the bias and solving the problem with the jumping pulse readout. 2005/01/28 Abelardo Moralejo * mpointing/MSrcPosCalc.cc - updated. Make it work as desired: obtain for each event the x,y position on the camera of a source whose celestial coordinates (J2000) have been set by the user in the container "MSourcePos" of type MPointingPos, added to the parameter list. If the container MSourcePos is not found, the center of the camera (or other fixed position x,y set in the parameter list by the user - in MSrcPosCam) is used as source position for all the events in the loop. 2005/01/28 Thomas Bretz * mjobs/MJCalibrateSignal.cc: - fixed that extract1,2,3 haven't been deleted if loop failed. - print tasklist also if loop failed. - added a undefined task (MTaskEnv "FinalFantasy") as last task to the event processing tasklist * callisto.rc: - added comments about "FinalFantasy" into call - added comment for obsolete resources as discussed yesterday evening: TimeUpperLimit * mbase/MMath.[h,cc], manalysis/MCerPhotPix.[h,cc], mpedestal/MPedPhotPix.h: - replaced TruncatePrecision by ReducePrecision (its simply a better name) * mbase/MParList.cc: - added a check to make 200%(!) sure that the container added to the list is a MParContainer (everything else could crash almost everything in Mars!) * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.cc: - simplified the code in the WriteResult functions by using the new WriteContainer in MJob - removed the TObjArray from the MParList! It is NOT a MParContainer there are a lot of circumstance how this can crash Mars. I don't know why the compiler allowed for this. - unified WriteResult and WriteHists - split GetOutputFile into two functions for simplification * mjobs/MJCalibration.h: - copy the extractorcam name when copying the contents * mjobs/MJob.[h,cc]: - new member function WriteContainer to simplify code in derived classes * mpointing/MSrcPosCalc.[h,cc] - fixed the header according to Abelardo's changes - added the initialization of the pointers to the constructor 2005/01/28 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc - introduce a security check for the time fine adjustment in case, it is too large. * mcalib/MCalibConstCam.[h,cc] * mcalib/MCalibConstPix.h - new classes to allow display of changing cal. constants with the interlaced cal. events * mcalib/MCalibrationChargeCalc.cc - removed stopping of PostProcess in case that the evtloop is finished with interlaced cal. events * mcalib/MCalibrateData.[h,cc] - fill MCalibConstCam with update results (once per calib. consts update == every 10 sec.) - introduce check for size of calibration constant. In case, it is completetly out of range, set the MBadPixelsPix::IsUnsuitableRun * mjobs/MJCalibrateSignal.cc: - display one MHCamera more with changing conv. factors (only for interlaced cal. events) * mpedestal/MPedCalcFromLoGain.cc - set default for MExtractWinFirst from 15 to 17 because of the late cosmics signals in December 2005/01/28 Abelardo Moralejo * mtemp/mpadova/macros/trainsubsample.C - added # of events to be written in the output (instead of fraction of total). Moved MSrcPosCam in output from RunHeaders to Events tree. 2005/01/27 Daniel Mazin and Markus Gaug * mcalib/MCalibrateData.[h,cc] - derive this class from MCamEvent in order to be able to display evolution of conversion factors in case of interlaced cal. events * mpointing/MInterpolatePointingPos.[h,cc] - new class to interpolate pointing positions, adapted from a class by Marcos Lopez * mjobs/MJCalibrateSignal.[h,cc] - enabled the calibration of data with interlaced calibration events * msignal/MArrivalTime.[h,cc] * mcalib/MCalibrateRelTime.cc - removed Error of calibrated arrival time, as agreed on the last software calibration meeting yesterday * mjobs/MJCalibrateSignal.cc - add display to show histogramming of conversion factors - modify default calibration to equiv. photo-electrons - allow for setting of MC, Raw or Root-file type in callisto.rc * callisto.rc - updated conf. file 2005/01/27 Thomas Bretz * callisto.cc: - don't display starting pedestals when calibrating the signal * callisto.rc: - added some comments * star.rc: - according to Daniel M. we have agreed to change the default cleaning level to adapt it roughly to the new pedestal * manalysis/MCerPhotPix.[h,cc], mpedestal/MPedPhotPix.h: - as agreed in the current calibration meeting we truncate the precision of the stored floating point values to roughly 0.5% to gain storage space in the calibrated data (the gzip algorithm compresses this stuff nicely - we gain roughly 15%) * mhflux/MHFalseSource.cc, mjobs/MJCalibration.cc, mjobs/MJStar.cc: - added a comment * mjobs/MJCalibrateSignal.cc: - changed title of unsuitable plot - removed plot for calibrated fundamental pedestal as agreed in the current calibration meeting (we may change this to an option) * mjobs/MJPedestal.[h,cc]: - changed the name of the "PedDiff" plot to be consistent with the other tab-name - changed the options for the display - removed the dependancy of fDisplayType and the SetDataCheck option - added option kDisplayNone - renamed enums from k*Display to kDisplay* * mhist/MHCamEvent.cc: - trying to get rid of the Err_%p workaround. * manalysis/MCerPhotEvt.[h,cc]: - added some '!' signs in the comment line. This is quick hack to gain I/O speed and storage space. We will soon have new containers for the calibrated data and image cleaning information. - changed version number to 6 * mhist/MHCamera.cc: - added member function SetAllUsed 2005/01/26 Abelardo Moralejo * macros/mccalibrate.C - removed creation and writing out of MSrcPosCam. It is more flexible to add it in starmc2.C if needed (for wobble mode for instance). * mtemp/mpadova/macros/RanForestDISP.C - added possibility to set the number of hadrons read in for the training. Added some missing containers to output. - Fixed rule concerning the DISP, by adding parentheses. Remember that MHMatrix::AddColumn does not respect the usual precedence of operations! * mtemp/mpadova/macros/resize.C - added to output missing container MRawEvtHeader * macros/starmc2.C - added missing container MImagePar. Added possibility to set the source position on the camera (for the wobble mode). 2005/01/25 Abelardo Moralejo * macros/starmc2.C - modified to allow double (train / test) output, for g/h separation studies. Added several missing containers to output. 2005/01/25 Thomas Bretz * mcalib/MCalibrationIntensityChargeCam.cc: - fixed a lot of 'default argument'-warnings to make to code compile * mbase/MParContainer.[h,cc]: - moved the empty Reset() function into the source file and added a lot of comments - implemented new helper-functions: GetNewObject * mbase/MContinue.[h,cc]: - allow to use MFilter-classes as filter in ReadEnv * mbase/MTaskEnv.cc: - replaced some code by GetNewObject * mhbase/MFillH.cc: - handle DrawOption "same" to be able to draw to the same pad * mhbase/MH.[h,cc]: - added same-argument to DrawSame * mhbase/MH3.cc: - removed some obsolete comments - remove own drawing options before calling fHist->Draw * mimage/MHHillas.cc, mimage/MHImagePar.cc: - first try of implementing 'same' drawing option 2005/01/25 Markus Gaug * mcalib/MCalibrationPattern.[h,cc] * mcalib/MCalibrationPatternDecode.[h,cc] - New Decoder task for the calibration pattern from the digital modules * mraw/MRawEvtHeader.[h,cc] - remove decoding from this class * mcalib/MCalibrationIntensityHiLoCam.[h,cc] - remove, because one needs anyhow much more than one data file to get a reasonable conversion factor * mcalib/MCalibCalcFromPast.[h,cc] - remove MCalibrationIntensityHiLoCam * mbadpixels/MBadPixelsPix.h * mbadpixels/MBadPixelsCam.cc - changed one function name to GetUnsuitableCalLevel() * mjobs/MJCalibration.cc - replace all Y-titles with units "FADC counts" by "FADC cnts" and "FADC slices" by "FADC sl.", otherwise they range out of the canvas. * mcalib/MCalibrationChargeCalc.cc - ensure to set the color correctly in MCalibrationBlindCam * callisto.rc - put space for MJCalibrateSignal.ExtractSignal.HiGainFirst: 2 MJCalibrateSignal.ExtractSignal.HiGainLast: 16 2005/01/24 Abelardo Moralejo * manalysis/MMcCalibrationUpdate.cc - Adapted to changes in MCalibrateData from 2005/01/16: moved qepix.SetAvNormFFactor(1.) from Process() to ReInit(). Due to this, for the last week you may have found trouble running starmc.C and mccalibrate.C. 2005/01/24 Thomas Bretz * callisto.cc: - removed non-existing option from output * manalysis/MEnergyEstimate.[h,cc]: - added ReadEnv member function * mbase/MContinue.[h,cc]: - implementes AllowEmpty option to support doing nothing defined in resource file - added a first draft to allow usage of class-filters instead of rules * mbase/MMath.[h,cc]: - implemented a function suggested by Florian Goebel which reduces the precision of a float to ~0.5% which is usefull for data compression by gzip * mdata/MDataChain.[h,cc]: - implemented ReadEnv member function * mfbase/MF.cc: - a small enhancement to the output in ReadEnv * mhbase/MH3.cc: - fixed call to FindObject in Paint which caused a profile to be displayed incorrectly in case it was read from a file * mhflux/MHFalseSource.[h,cc]: - removed old obsolete unsused Significance functions - implemented ReadEnv member function - set false source binning only if BinningFalseSource is not default - check parlist for BinningAlpha * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, mjobs/MJPedestal.cc: - added an additional check and output if output-file could not be opened * mjobs/MJob.h: - added some Getter * mhbase/MBinning.[h,cc]. - added nen member functions + SetEdgesRaw + ReadEnv + Print * mhflux/MAlphaFitter.[h,cc]: - added new member function ReadEnv * mhflux/MHAlpha.cc: - fixed a problem when fitting without off-data * mbase/MStatusDisplay.cc: - implemented a further fix in DrawClonePad to make sure that the X-stuff doesn't get confused while still GetDrawOption returns the correct value 2005/01/24 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc - introduced security check for the times fine-tuning to catch outliers because of deviating pulse forms. * msignal/MExtractTime.cc * msignal/MExtractor.cc - lowered default high-gain saturation limit to 250 - removed Clear() for two results containers at beginning of Process() * msignal/MExtractor.h - Take fHiLoLast into the Clone() * msignal/MExtractedSignalPix.cc - change sign of default initializer to negative. 2005/01/23 Markus Gaug * mhcalib/MHCalibrationHiLoCam.[h,cc] - updated to new logain switch setting in MExtractTimeAndCharge - extract also high-gain vs. low-gain time difference * mhcalib/MHCalibrationCam.[h,cc] * mhcalib/MHCalibrationChargeCam.[h,cc] - updated reading of conf. values in ReadEnv * mhcalib/MCalibrationHiLoCam.[h,cc] * mhcalib/MCalibrationHiLoPix.[h,cc] * mhcalib/MCalibrationIntensityHiLoCam.[h,cc] - updated accordingly * mbadpixels/MBadPixelsCam.cc - removed some bugs in the Print() function 2005/01/22 Markus Gaug * mhcalib/MHCalibrationRelTimeCam.cc - display in the averaged times display the event-by-event averaged absolute arrival times instead of the rel. ones which do not make much sense. * mhcalib/MHCalibrationTestTimeCam.[h,cc] * mhcalib/MHCalibrationTestCam.[h,cc] - update to the latest changes in analysis chain. * mjobs/MJExtractCalibTest.[h,cc] - update to the latest changes in analysis chain. * mjobs/MJCalibration.cc - replace title of that times-averageing Tab from "RelTimes" by "Times". * macros/calibration.C - update to changes in MJExtractCalibTest 2005/01/21 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc * msignal/MExtractTimeAndChargeSlidingWindow.cc * msignal/MExtractTimeAndChargeSpline.cc - use the max. bin content for low-gain extraction * callisto.rc - add place for LoGainSwitch 2005/01/21 Florian Goebel * mfbase/MF.cc: - include a (TString) cast to make it compilable with gcc2.95.3 2005/01/21 Thomas Bretz * mpointing/MSrcPosFromModel.cc: - fixed crash in Process if no pointing model available * mpointing/MPointingPosCalc.h: - added missing initialization of data members * mastro/MObservatory.[h,cc]: - added ReadEnv member function * mbase/MTaskEnv.h: - added (=0) default to SetDefault 2005/01/20 Markus Gaug * mcalib/MCalibrationIntensityChargeCam.[h,cc] - added function to display fluctuations of a variable * mcalib/MCalibrationPix.cc - fixed small bug in High-gain mean error. * msignal/MExtractTimeAndCharge.[h,cc] - introduced high-gain maximum limit before extracting the low-gain 2005/01/20 Thomas Bretz * mbase/MContinue.[h,cc]: - added ReadEnv member function to support resource files * mbase/MEvtLoop.[h,cc]: - added a second arguemtn to reading of the resource file by name - added some checks when reding the resource file and the parameter list hasn't been setup * mbase/MParList.cc: - removed an obsolete output from ReadEnv * mfbase/MF.[h,cc]: - added ReadEnv member function to support resource files - added kAllowEpty flag to support skipping by resource files * mfbase/MFilterList.cc: - added a comment * mbase/MStatusDisplay.[h,cc]: - fixed Write to be compatible with root 4.02/00 - worked around a problem with reading the DrawOption correctly from a stored status display 2005/01/19 Thomas Bretz * mbase/MMath.cc: - added a comment to SignificanceLiMa, made by Daniel Mazin - also check for b==0 * mhflux/MAlphaFitter.[h,cc]: - fixed significance calculation in case of on-off data - added fScaleFactor * mhflux/MHAlpha.[h,cc], mhflux/MHFalseSource.cc: - handle scale factor in case of on-off observations * mjobs/MJPedestal.cc: - aligned screen output to 80col rule * mtrigger/MFTriggerPattern.[h,cc]: - assigned correct integers to enum - made sure that the enum is correctly handled in all function by applying a r-value to the condition 2005/01/19 Abelardo Moralejo * mtrigger/MFTriggerPattern.[cc,h] - Changed Bool_t arguments of all setters to new type Prescale_t defined by N. Galante (see below) 2005/01/19 Nicola Galante * mtrigger/MFTriggerPattern.[cc,h] - added in header enum Prescale_t { kUnPrescaled = kFALSE, kPrescaled = kTRUE }; - fixed a bug in Process, both fMaskRequiredUnprescaled and fMaskRequiredPrescaled are checked simultaneously. 2005/01/18 Markus Gaug * mcalib/MCalibColorSet.cc - fixed the remaining day of data without colour in project name neither in digital modules bits. * mpedestal/MPedCalcPedRun.[h,cc] - catch the continuous light runs with MRawRunHeader::fRunType == kRTCalibration to be recognized as effective pedestal runs. 2005/01/18 Thomas Bretz * mbase/MMath.cc: - added a check for s==0 in SignificanceLiMa, because otherwise the result is NaN * mfbase/MF.cc: - removed an obsolete debugging output from the latest changes * mhflux/MHAlpha.cc: - reset fHTime, too 2005/01/18 Nicola Galante * mtrigger/MFTriggerPattern.cc: - added parentesis to ensure bitwise operators priority with respect to logical operators. 2005/01/17 Thomas Bretz * manalysis/MEnergyEstimate.[h,cc]: - changed to be more general. Energy is now estimated from a rule (MDataChain) The default behaviour is still the same as before to copy the energy from MMcEvt * mbase/MTask.cc: - changed to write out the descriptor istead of the task-name only in Pre/PostProcess * mhbase/MH.cc: - initialize fSerialNumber and fNumExecutions in constructor * mhflux/MHFalseSource.cc: - according to a suggestion by Markus Mayer I have changed \\sigma_{max}=f to S_{max}=f\\sigma * mjobs/MJCalibrateSignal.cc: - as discussed with Markus and Abelardo fixed the MFTriggerPattern call. * mtrigger/MFTriggerPattern.cc, mtrigger/MTriggerPattern.cc, mtrigger/MTriggerPatternDecode.cc: - added some comment about file version * mbase/MFilter.h: - implemented new virtual function GetDataMember like in MData * mbase/MTask.[h,cc]: - when filter is added ass GetDataMember to branch list (should be obsolete, because filter is in the tasklist, but it should not hurt) * mfbase/MF.[h,cc], mfbase/MFDataChain.[h,cc], mfbase/MFDataMember.[h,cc], mfbase/MFilterList.[h,cc]: - implemented new function GetDataMember 2005/01/17 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc - remove a situation where the high-gain signal can be 0. * mtrigger/MTriggerPattern.h - fixed a bug in defining the trigger bit pattern (Have to start from 0 instead of 1) * mjobs/MJPedestal.cc * mjobs/MJCalibrateSignal.cc - fixed default extraction ranges. * callisto.rc - fixed default weights files for pedestal extraction for cosmcis * mcalib/MCalibrationChargeCalc.cc - removed program exit on occurrance of multiple colours without intensity calibration 2005/01/17 Nadia Tonello and Markus Gaug * mcalib/MCalibrationChargeCam.cc - some fit improvements in the function GetAveragedConvFADC2PhotPerArea 2005/01/16 Markus Gaug * mhcalib/MHCalibrationCam.[h,cc], mhcalib/MHCalibrationRelTimeCam.[h,cc], mhcalib/MHCalibrationChargeCam.[h,cc] - put overflow management and results camera initialization into base class * mcalib/MCalibrateData.[h,cc] - added possibility to re-normalize signal to equiv. photo-electrons ( SetSignalType(MCalibrateData::kPhe) ). Default is old version in photons - speed up Process by storing pre-calculated calibration constants in arrays (needed 40% of CPU time of the eventloop before, now: 23%) - added new pointer to different MCalibrationChargeCam used for updates - added possibility to update the conversion factors using the MCalibrationChargeCam stored in fCalibUpdate. - added Print() function * mcalib/MCalibCalcFromPast.[h,cc] - committed final version, now also in the Makefile * mjobs/MJCalibrateSignalFromOutside.[h,cc], macros/calibration.C - committed final version, now able to calibrate interlaced cal. events. 2005/01/14 Hendrik Bartko * msignal/calibration_weights_UV.dat - fixed a small bug in the noise autocorrelation of the AB-noise * msignal/calibration_weights_blue.dat - new weights file for blue calibration pulses * cosmics_weights.dat - fixed a small bug in the noise autocorrelation of the AB-noise 2005/01/14 Markus Gaug * msignal/MExtractTimeAndChargeDigitalFilter.cc - added a small acceleration of the program, tested by Hendrik and me. * mpedestal/MPedCalcFromLoGain.cc - fixed one warning output which was not a real warning. * mcalib/MCalibrationChargeCam.cc - improved the function to calculate a mean conversion factor over the whole camera including a fit to the values. * mpedestal/MPedCalcPedRun.[h,cc] - undo some changes introduced by TB on 2/12/04 which had made the use of interlaced pedestal events impossible again. - Use now the new class MTriggerPattern directly to recognize an interlaced pedestal event. 2005/01/14 Thomas Bretz * callisto.cc: - fixed a typo in output * manalysis/MGeomApply.cc: - removed some old code already in comments - added possibility to switch off automatic processing (used if two different geometries around) * manalysis/MMultiDimDistCalc.cc, mhbase/MHMatrix.[h,cc], mranforest/MRanForestCalc.cc, mtools/MHSimulatedAnnealing.[h,cc], mtools/MSimulatedAnnealing.h: - added include of TVector because in newer root version it is not included from TMatrix anymore * mbase/BaseLinkDef.h, mbase/MMath.[h,cc]: - to stick to the convention of TMath in newer root versions MMath changed from a class to a namespace * mbase/MEvtLoop.[h,cc]: - to support newer root version added a second Write-function with a const qualifier. * mdata/MDataChain.cc: - changed access to TMath for newer root versions * mfileio/MChain.[h,cc]: - implemented a workaround for teh changed LoadTree definition in newer root-versions * mfileio/MReadTree.cc: - fixed a bug in CheckBranchSize caused some warning to be displayed * mhflux/MHAlpha.cc: - removed check for fResult in PostProcess (it is always there) * msignal/MExtractTimeFastSpline.cc: - fixed delete --> delete[] * mbadpixels/MBadPixelsCalc.cc: - slight change to some output * mbase/MTaskEnv.h: - set name of default task when pointer is given * mjobs/MJCalibrateSignal.cc: - fixed handling of extraction range for various cases - fixed handling in case no arrival times are calculated * mjobs/MJCalibration.cc: - write at least a default arrival time calibration container to make further processing easier * mjobs/MJPedestal.[h,cc]: - fixed handling of extraction range for various cases 2005/01/14 Abelardo Moralejo * mtemp/mpadova/macros/trainsubsample.C, RanForestDISP.C - added. Two macros used in the analysis of real wobble mode data. 2005/01/14 Daniela Dorner * macros/sql/filldotrun.C - added new arehucas-verions and changed code accordingly 2005/01/13 Abelardo Moralejo * macros/starmc.C - Added (commented) lines for the case of gamma MC source off-axis (wobble mode). Changed default extractor to MExtractFixedWindowPeakSearch. 2005/01/13 Raquel de los Reyes * callisto.rc - introduced several configuration lines (format: "class".DataCheck: No) to allow callisto to run with rawfiles. Necessary for the datacheck. 2005/01/13 Markus Gaug * mcalib/MCalibColorSet.cc - fixed runs 45605-45609 * msignal/MExtractor.h - take out the variable fHiLoLast from the streamer. Will be initialized in the ReInit(), if needed * msignal/MExtractor.cc - Initialized fHiLoLast to 0. Otherwise, a second eventloop with the same extractor may have that variable set to a certain value, even if not desired. The ReInit() fixes fHiLoLast, if different from 0. * mpedestal/MExtractPedestal.cc * mpedestal/MPedCalcPedRun.cc * mpedestal/MPedCalcFromLoGain.cc - fix the output of the print to the correct value for the case that the extractor is used. 2005/01/13 Thomas Bretz * callisto.rc: - fixed some typos * mbase/MLog.cc: - unset DEBUG defined unintentionally * msignal/MExtractTimeAndChargeDigitalFilter.cc: - removed printing Weights in InitArrays, because otherwise the output of a full data calibration is totally crowded with numbers. Having the weights-file name on the display is perfectly enough. 2005/01/12 Markus Gaug * mcalib/MCalibrationIntensityRelTimeCam.cc - added fit to improve averageing of the obtained results 2005/01/12 Thomas Bretz * manalysis/MMatrixLoop.cc: - changed name to MRead because it now derives from MRead * mbase/MEvtLoop.[h,cc]: - implemented an option not to cascade the status display to the parameter list in PreProcess * mhflux/MHAlpha.cc: - changed name of "Significance" to "MinimizationValue" - return -significance to have a value being minimized * mhist/MHCamera.cc: - fixed output of text in legend * mhist/MHEvent.[h,cc]: - implemented new options for calibrated pedestals * mmain/MEventDisplay.cc: - fixed to support latest changes in MJCalibrateSignal * mpedestal/MPedPhotCam.cc: - added new options in GetPixelContent (4 and 5) to support a correct camera display * mjobs/MJCalibrateSignal.cc: - fixed display of calibrated pedestal and pedestal rms - changed order of plots. Now all interpolated values (means all calibrated values which are bad-pixel treated) are displayed behind the unsuitable pixels. * mjobs/MJ*.cc: - corrected all wrong %06d to %08d to fit the number of digits in run-numbers 2005/01/11 Abelardo Moralejo * mjobs/Makefile - added missing include -I ../mtrigger 2005/01/11 Thomas Bretz * callisto.cc, callisto.rc: - changed such, that all three kinds of pedestals are calcualted (usefull for studies) * manalysis/MMatrixLoop.[h,cc]: - derived from MRead - implemented some basic functions from MRead * mfilter/MFCosmics.[h,cc]: - allow setting of name of MPedestalCam * mhbase/MBinning.[h,cc]: - added SetEdges taking MParList as input * mhflux/MHAlpha.cc: - use new function from MBinning * mjobs/MJCalibrateSignal.[h,cc]: - changed to calculate all three kinds of pedestals - added filters for trigger pattern and illuminated events * mjobs/MJPedestal.cc: - give different names to tabs with different pedestals * mjobs/MJStar.cc: - on request changed used pedestal from "FromExtractor" to "FromExtractorRndm" * mtrigger/MTriggerPattern.h: - added Reset function * mtrigger/MTriggerPatternDecode.[h,cc]: - added using file format version number 2005/01/11 Markus Gaug * mbadpixels/MBadPixelsPix.cc - updated documentation * mcalib/MCalibrationChargeCalc.cc - make pixels with deviating number of phes unreliable instead of unsuitable (this was already thought so, but missed to modify at one place). * mhcalib/MHCalibrationCam.[h,cc] - add possible flag 'kInterlaced': default: kFALSE (like before) - added pointer to MRawEvtHeader to deny cosmics events in case of 'interlaced' flag is set. No changes for 'normal' calibration 2005/01/10 Benjamin Riegel * mreport/MReportStarguider.cc, mreport/MReportStarguider.h - added two classes for implementing starguider-data * mreport/ReportLinkDef.h - added class MReportStarguider to be linked: #pragma link C++ class MReportStarguider+; * mreport/Makefile - added file MReportStarguider.cc * merpp.cc - added two containers ( MReportStarguider, MTimeStarguider ) and added MReportStarguider to the list: w->AddContainer("MReportStarguider", "Starguider"); w->AddContainer("MTimeStarguider", "Starguider"); r->AddToList("MReportStarguider"); 2005/01/10 Markus Gaug * mcalib/MCalibColorSet.cc - return kFALSE for CL-run instead of kTRUE * mcalib/MCalibrationChargeCalc.cc - stop program in case that multiple colours are found in same file without intensity calibration * mbadpixels/MBadPixelsPix.h - added two new possible UnCalibrated_t flags for the hi-lo calibration * macros/calibration.C - add the calls to: MArray::Class()->IgnoreTObjectStreamer(); MParContainer::Class()->IgnoreTObjectStreamer(); in main. * msignal/MExtractor.h - added Getter for fOffsetLoGain (was still missing) * mhcalib/MHCalibrationChargeCam.[h,cc] - remove pixels with histogram overflow only if their percentage passes a certain limit (default: 0.5%). Before, every overflow lead to an unsuitable pixel. * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - implemented changes suggested by T.B. to speed up calculations - take fNameWeightsFile into the streamer, otherwise the Clone() will always create an extractor with cosmic's weights. - set fOffsetLoGain to a slighly higher value. The DF seems to have a different offset since it uses different pulse shapes and thus sightly different time definitions. 2005/01/10 Thomas Bretz * mhvstime/MHVsTime.cc: - fixed a compiler error for gcc 2.95.3, see Mantis bug # 157 * callisto.cc: - changed such, that the calculated pedestal is not random anymore - added code to calculate the pedestal also with randomization, but this code is for the moment commented out. * callisto.rc: - fixed naming of pedestal calculation * mbadpixels/MBadPixelsCalc.cc: - added a second check which compares the pedestal rms with the variance of the pedestal rms in the same sector * mjobs/MJCalibrateSignal.[h,cc]: - changed to calculate the pedestal from extractor without randomization - added code to calculate the pedestal also with randomization, but this code is for the moment commented out. * mjobs/MJCalibration.cc: - made sure that pedcam always has the correct name (FIXME? Print a warning if it has the wrong name) * mjobs/MJPedestal.[h,cc]: - changed such, that it allows the calculation of pedestals in three different ways (fundamental, fromextractor, fromextractorrndm) - therefor removed SetExtractorResolution and added + void SetExtractionFundamental() + void SetExtractionWithExtractorRndm() + void SetExtractionWithExtractor() * mjobs/MJStar.cc: - changed/fixed the input name of the MPedPhotCam used in the image cleaning * mraw/MRawFileRead.[h,cc]: - changed return type of OpenNextFile - in some cases return kERROR in OpenNextFile to abort the Processing with an error * mraw/MRawRunHeader.cc: - call a wrong file format version ERROR now * mhflux/MAlphaFitter.[h,cc]: - make sure that resetted values are returned if fit failed - set default scaling too kOffRegion * mhflux/MHAlpha.cc: - some small fixes to handling of MHAlphaOff * mhflux/MHFalseSource.[h,cc]: - implemented possible usage of MHFalsSourceOff for On-Off-Analysis - updated display accordingly - updated fit accordingly - removed catalog temporarily from plots until I found the reason for the strange crashes * mbadpixels/MBadPixelCalc.[h,cc]: - implemented the possibility to check the pedestal rms against the variance of the pedstal rms, too. The option is curretly switched off. - enahanced informal output in PreProcess * mbase/MTaskList.cc: - a little change to some output 2005/01/10 Wolfgang Wittek * mfbase/MFEventSelector2.cc - check whether filter exists before calling filter->CallPreProcess(parlist) 2005/01/08 Markus Gaug * mhcalib/MHCalibrationHiLoCam.[h,cc] * mcalib/MCalibrationHiLoCam.[h,cc] * mcalib/MCalibrationHiLoPix.[h,cc] * mcalib/MIntensityCalibrationHiLoCam.[h,cc] * mhcalib/Makefile, mcalib/Makefile, mhcalib/HCalibLinkDef.h, mcalib/CalibLinkDef.h - new classes for calibration of conversion high-gain vs. low-gain * msignal/MExtractedSignalPix.[h,cc] - added data member fChisquare, set to -1. by Clear() and Reset() - raised version number by 1 * msignal/MExtractedSignalCam.[h,cc] - added data member fNdf, set to -1 by default - new function: GetProb(const Int_t pixidx) to be called to calculate the joint probability of Chisquare of pixel "pixidx" and fNdf - added documentation of data members - raised version number by 1 * mhcalib/MHCalibrationChargeCam.cc - strengthened default histogram limits a bit, should accelerate the calibration by 20%. * mjobs/MJCalibrateSignalFromOutside.cc - fixed two lines to compile MCalibrateData with the recent changes by TB * msignal/MExtractTimeAndChargeDigitalFilter.cc - fixed two bugs introduced yesterday by TB. * msignal/MExtractTimeAndChargeSpline.cc * msignal/MExtractTimeAndChargeSlidingWindow.cc - adopt part of TB's speed accelerations into these classes * msignal/MExtractTimeAndCharge.cc - fix the low-gain extraction window for the case that the high-gain is saturated. Was skipped so far. 2005/01/07 Markus Gaug * msignal/MExtractFixedWindowPeakSearch.[h,cc] - catch the case that more than 90% of the pixels have saturated signals and fix the extraction window from the occurrance of saturation, then. Important for high-intensity calibration events. * msignal/MExtractor.cc * msignal/MExtractTime.cc * msignal/MExtractTimeAndCharge.cc - added some documentation * msignal/MExtractTime.[h,cc] - moved the empty function FindTimeHiGain() and FindTimeLoGain() to the header-file. 2005/01/07 Abelardo Moralejo * mbase/MLog.h - Added #include "TSystem.h", otherwise gSystem is not recognized in Mac OSX. * manalysis/MMakePadHistograms.cc - Changed badcalc.SetNamePedPhotContainer to badcalc.SetNamePedPhotCam 2005/01/07 Thomas Bretz * mbadpixels/MBadPixelsCalc.[h,cc], macros/ONOFFAnalaysis.C: - replaced PedPhotContainer by PedPhotCam for consistency * mbase/MLog.[h,cc]: - return *this in Seperator() * mbase/MPrint.[h,cc]: - use new separator manipulator in PreProcess - fixed a type: separator instead of seperator * mfileio/MReadTree.[h,cc]: - added a check for branch->IsAutoDelete() in Notify() * mpedestal/MExtractPedestal.[h,cc]: - added new option 'fRandomCalculation' be used to switch on-/off- randomization in extractors, the default should be like before - added Process() calling Calc() * mpedestal/MPedCalcFromLoGain.[h,cc], mpedestal/MPedCalcPedRun.[h,cc]: - renamed Process() to Calc() * Makefile: - removed macros/calibration.C, which seems to have been unintantionally introduced. * manalysis/Makefile: - removed unintantionally introduced wrong include * msignal/MExtractTimeAndChargeDigitalFilter.cc: - a small acceleration discussed with Hendrik by replacing a counter in a loop by pointer arithmetics * mraw/MRawEvtPixelIter.cc: - fixed a bug in GetMaxIdxHiLoGain which caused the loop to read one byte behind the end of the array - fixed HasLoGain() which really did weired things, means accessing sometimes memory somewhere. This could theoretically result in assigning the wrong lo-gains to the wrong pixels. * mtrigger/MTriggerPattern.[h,cc], mtrigger/MTriggerPatternDecode.[h,cc], mtrigger/MFTriggerPattern.[h,cc]: - added * mtrigger/Makefile, mtrigger/TriggerLinkDef.h: - added MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern * manalysis/MEnergyEstParam.h: - added a new function SetVariables calling SetCoeff * mcalib/MCalibrateData.[h,cc]: - removed data members for container names - added new lists for container names - allow to calibrate more than one pedestal container at the same time * mjobs/MJCalibrateSignal.cc: - changed accordingly 2005/01/05 Thomas Bretz * mcalib/MCalibrationBlindPix.cc, mcalib/MCalibrationChargeCalc.cc, mhcalib/MHCalibrationRelTimeCam.cc: - made some output lines fit into convinience window of 80 col * mhist/MHCamEvent.cc: - make sure that x-axis has correct title * msignal/MArrivalTimePix.cc: - init error to -1 which is a obviously non valid value - fixed IsValid() which gave wrong results * msignal/MExtractTimeAndCharge.cc, msignal/MExtractedSignalPix.cc: - made sure that LoGain is flagged non-valid if no lo-gain exists - push time back at the edge of the allowed limits if outside * mbase/MGList.[h,cc]: - introduced new functions Delete and DeletePictures - SetBit(kMustCleanup) in constructor. Otherwise it is not correctly removed from ListOfCleanups * mbase/MLog.cc: - SetBit(kMustCleanup) if adding a plugin to make sure it is cleaned from the list * mbase/MParContainer.[h,cc]: - replaced return type of GetDescriptor by TString. The old version was terribly wrong! The returned memory wasn't removed as soon as the function returned. * mbase/MStatusDisplay.[h,cc]: - for security (thread safty) replaced all Form() by MString::Form() - implemented a more secure scheme of Closing (Clone()) this was a hint given by valgrind - set kMustCleanup for all new object in ClonePad not only kCanDelete - fixed some lines in pulldown-menus - add TPads to ListOfCleanups in ClonePad (workaround!) * mbase/MString.[h,cc]: - implemented a new static Form() function returning a copy of the result * mbase/MTask.[h,cc]: - replaced return type of GetDescriptor by TString. The old version was terribly wrong! The returned memory wasn't removed as soon as the function returned. - Made GetDescriptor thread safe using MString::Form * mfileio/MWriteRootFile.cc: - Use GetDescriptor().Data() when using any kind of printf function * mhbase/MFillH.cc: - replaced string concatenation in all constructors by a Form (also suggested by valgrind) * mhcalib/MHCalibrationRelTimeCam.cc: - made some output fit into 80col boundary 2005/01/03 Thomas Bretz (HAPPY NEW YEAR) * mfht: - added new directory for hexagonal fourier transformation * mfht/HftIncl.h, mhft/HftLinkDef.h, mhft/MGeomCamMagicXT.[h,cc], mhft/MGeomCamMagicEnhance.[h,cc], mhft/MHexgaonalFT.[h,cc], mhft/MHexagonalFreqSpace.[h,cc], mhft/MHexagonalFTCalc.[h,cc], mhft/Makefile: - added * macros/extendcam.C: - added: tutorial for MGeomCamExtend * macros/hft.C: - added: tutorial for MHexgonalFTCalc * macros/dohtml.C: - updated * macros/rootlogon.C: - updated * Makefile: - mhft added * mbase/MParContainer.cc, mbase/MLog.cc: - added a pre-compiler option for destructor debugging * mbase/MTaskList.[h,cc]: - added new function Replace * mdata/MDataChain.cc, mfbase/MF.cc: - shortened some output * mdata/MDataArray.[h,cc]: - added new function FindRule * mfileio/MReadTree.[h,cc]: - enhanced functionality to be able to read a TTree stored in memory instead of a file. Therefor introduced fTree which is now the pointer used and replaced fChain where TTree and TChain have common behaviour. Where they behave uncommon new code for the new case has been added. * mfileio/MWriteRootFile.[h,cc]: - enhanced functionality to be able to write a TTree into memory instead of a file. This were maily bugfixes for the case fOut==0, which must be handled correctly. Becarefull a tree filles without a file is not deleted automatically! * mhbase/MBinning.h: - added copy constructor - fixed buggy SetEdges(MBinning&) which didn't work * mhbase/MHMatrix.cc: - when adding a new rule check first if the same rule already exists * mhflux/MAlphaFitter.[h,cc]: - added new functionality to support on-off analysis - didn't touch existing code * mhflux/MHAlpha.[h,cc]: - added new functionality to support on-off analysis - replaced Fit() calls by newer function calls - added DrawAll - PRELIMINARY - fixed a bug when projecting - may be the reson for some strange crashes * mcalib/MCalibColorSet.cc: - fixed a stupid bug introduced last year, which caused MCalibColorSet in some circumstances to stop the eventloop when it shouldn't * mjobs/MSequence.cc: - expand path names