source: trunk/MagicSoft/Mars/Changelog@ 9409

Please  do  not write behind the end of line tag so that it is  possible
to   send  a   Changelog   file  to  a  line  printer  directly.  Thanks.

For your entries please follow EXACTLY this style:

_yyyy/mm/dd_[Your Name]
_
___*_filename:
_____-_description
_
___*_filename2, filename3:
_____-_description
_
_
_

While an underscore is a placeholder for a white-space or an empty line.

                                                 -*-*- END OF LINE -*-*-
 2009/03/23 Thomas Bretz

   * resources/starguider01000534.txt:
     - added



 2009/03/19 Daniel Hoehne-Moench

   * datacenter/scropts/mcsequences:
     - bugfix: replaced $user by $us
     - bugfix: fPriority is now inserted into the correct table



 2009/03/16 Thomas Bretz

   * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
     - added new starguider calibration since 1000534

   * datacenter/macros/plotdb.C, datacenter/macros/plotrundb.C:
     - added option to set ds-number in datset

   * mgeom/MGeomCamMagic.cc:
     - fixed layout of the MII camera

   * mpointing/MPointingDevCalc.cc:
     - updated informations



 2009/03/16 Daniel Hoehne-Moench

   * datacenter/scripts/fillcamera
     - bugfix: the first line was moved by a tabulator



 2009/03/16 Stefan Ruegamer

   * datacenter/scripts/makecallistolinks
     - added >/dev/null in line 68 to prevent the mails to dc@astro
     - removed the -v for the ln

   * datacenter/scripts/sourcefile
     - added printprocesslog for rm -v in the finish function (mails)



 2009/03/15 Thomas Bretz

   * mgeom/MGeomCam.[h,cc]:
     - added member function to get the total sensitive area of the
       camera

   * mgeom/MGeomCamMagic.cc:
     - included TMath for newer root versions



 2009/03/07 Thomas Bretz

   * RELEASE V2.3



 2009/03/06 Thomas Bretz

   * datacenter/macros/plotrundb.C datacenter/macros/fillstar.C:
     - added RunDataCheck access

   * mreflector/MRflEventData.cc:
     - replaced DistanceToPrimitive by IsInside



 2009/03/05 Thomas Bretz

   * mreport/MReportCamera.cc:
     - fixed a problem if the HVFIL section is empty

   * merpp.cc:
     - added --dev-null option to Usage output

   * mjobs/MJMerpp.[h,cc]:
     - fixed operation in --dev-null mode



 2009/03/04 Thomas Bretz

   * datacenter/macros/plotdb.C:
     - updated some binnings

   * datacenter/macros/fillganymed.C:
     - use the primary also when inserting

   * mgeom/GeomLinkDef.h:
     - added MGeomCamMagicII

   * mgeom/MGeom.[h,cc]:
     - added option to set position
     - removed DistanceToPrimitive, use IsInside instead

   * mgeom/MGeomCam.[h,cc]:
     - added a virtual function to CreateNN
     - added a workaround after reading by calling CreateNN
       because with the last changes the pixel indices get lost

   * mgeom/MGeomCamCT1.[h,cc]:
     - now derives from MGeomCamDwarf
     - accordingly increased version number

   * mgeom/MGeomCamDwarf.[h,cc]:
     - removed Clone -> now in MGeomCam

   * mgeom/MGeomCamMagic.[h,cc]:
     - added MGeomCamMagicII <preliminary>

   * mgeom/MGeomCamSquare.[h,cc]:
     - removed creation of next neighbors -> now automatic

   * mgeom/MGeomPix.[h,cc]:
     - added rotation angle in terms of cos(phi) and sin(phi)
     - rotate in PaintPrimitive
     - adapted IsInside accordingly

   * mgeom/MGeomRectangle.[h,cc]:
     - if only width is given assume a square
     - make sure that the box is correctly painted for all root versions
     - fixed distance to farthest point

   * mgui/MHexagon.[h,cc]:
     - removed obsolete dependence on MGeomPix

   * mhist/MHCamera.cc, mtools/MagicJam.cc:
     - replaced DistanceToPrimitive by IsInside

   * mjobs/MJSimulation.cc:
     - replaced accidental _I_ in file names by _Y_

   * mreport/MReportCC.[h,cc]:
     - added version >=200809030
     - improved modularity of code



 2009/03/03 Thomas Bretz

   * ceres.rc:
     - added some more infomation
     - updated paths

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added atmospheric layers
     - added interpretation of new XSCATT/YSCATT in newer corsikas

   * msim/MSimAtmosphere.[h,cc]:
     - changed path
     - MAtmosphere doesn't search for any files per default anymore
     - changed atmopsheric layers to the ones fitted by Corsika
     - added possibility to change input files to ReadEnv

   * msimcamera/MSimCalibrationSignal.cc:
     - don't create a camera geometry yourself
     
   * resmc/atmosphere-aerosols.txt, resmc/atmosphere-ozone.txt,
     resmc/ct1-pde.txt, resmc/dwarf-apdmap.txt, resmc/dwarf-cones.txt,
     resmc/dwarf-pde-gapd.txt, resmc/dwarf-reflectivity.txt,
     resmc/dwarf-reflector.txt, resmc/magic-cones-inner.txt,
     resmc/magic-pde.txt, resmc/magic-reflectivity.txt,
     resmc/magic-reflector-chessboard.txt, resmc/magic-reflector.txt,
     resmc/magic-trigger-1NN.txt, resmc/magic-trigger-2NN.txt,
     resmc/magic-trigger-3NN.txt, resmc/magic-trigger-4NN.txt:
     - added

   * mhist/Makefile:
     - removed accidental MHQuality

   * mhist/MHCamera.cc:
     - fixed a warning when calling DistancetoPrimitive

   * mgeom/MGeomCamSquare.cc:
     - accidentaly used Double_t instead of Short_t when calling
       SetNeighbors
     - changed number of pixels from UInt_t to Short_t. It doesn't make
       sense to support more pixels than we can store as index for
       neighbors

   * Makefile:
     - added mreflector to resolve unresolved symbols



 2009/03/02 Daniela Dorner

   * datacenter/db/plotdb.php:
     - adapted width of table



 2009/03/02 Thomas Bretz

   * mgeom/MGeomCam.[h,cc], msimreflector/MMirror.h,
     msimreflector/MMirrorDisk.[h,cc], msimreflector/MMirrorHex.[h,cc],
     msimreflector/MMirrorSquare.[h,cc], msimreflector/MReflector.[h,cc]:
     - added GetA member function

   * manalysis/MCameraData.cc, mbadpixels/MBadPixelsCalc.cc,
     mbadpixels/MBadPixelsCam.cc, mbadpixels/MBadPixelsTreat.cc,
     mcalib/MCalibrationCam.cc, mcalib/MCalibrationChargeCalc.cc,
     mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationPulseTimeCam.cc,
     mcalib/MCalibrationRelTimeCalc.cc, mcalib/MCalibrationRelTimeCam.cc,
     mcalib/MCalibrationTestCalc.cc, mcalib/MCalibrationTestCam.cc,
     mcorsika/MCorsikaEvtHeader.cc, mfilter/MFSoftwareTrigger.cc,
     mgeom/MGeomCam.cc, mhcalib/MHCalibrationCam.cc,
     mhcalib/MHCalibrationChargeCam.cc,  msignal/MSignalCam.cc,
     mhcalib/MHCalibrationPulseTimeCam.cc, mpointing/MPointingPos.h, 
     mhcalib/MHCalibrationRelTimeCam.cc, mhft/MHexagonalFTCalc.cc,
     mhist/MHCamera.cc, mimage/MHillas.cc, mimage/MNewImagePar.cc,
     mjobs/MJCut.cc, mjobs/MJSimulation.cc, mpedestal/MPedPhotCam.cc, 
     mpedestal/MExtractPedestal.cc, mpedestal/MPedestalCam.cc, 
     msimcamera/MSimGeomCam.cc, msimcamera/MSimRandomPhotons.cc:
     - replaced MGeomPix by MGeom

   * mjobs/MJStar.cc:
     - added BinningDist
     - converted Muon cuts from mm to deg

   * mhflux/MHCollectionArea.cc:
     - fixed a problem that a plot disappeared in old files

   * mmuon/MMuonSearchPar.cc:
     - switched off the check in Paint (this works only for MAGIC :( )

   * datacenter/macros/fillganymed.C:
     - simplified by using MSQLMagic instead of MSQLServer



 2009/03/01 Thomas Bretz

   * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
     - added pointing model 328198

   * mbase/MSpline3.h:
     - added a cast to make it compile with root 5.18

   * melectronics/MPulseShape.cc:
     - included TH1 to make it compile with root 5.18

   * mhflux/MAlphaFitter.[h,cc]:
     - convert MString::Format to Data() 
     - added type SignificanceSqrtExcess

   * mhflux/MHFalseSource.cc, mjobs/MJSpectrum.cc:
     - convert MString::Format to Data() 

   * mhist/MHCamera.cc:
     - changed some const TString to const char to resolve 
       ambiguity in root 5.18 in TF1 constructor

   * msim/MHPhotonEvent.cc:
     - use TMath::Abs instead of abs 

   * msim/MSimPointingPos.[h,cc]:
     - moved getter and setter to source file to avoid including of
       TMath

   * mgeom/MGeom.[h,cc]:
     - added

   * mgeom/MGeomRectangle.[h,cc]:
     - added

   * mgeom/MGeomCamSquare.[h,cc]:
     - added

   * mgeom/Makefile, mgeom/GeomLinkDef.h:
     - added MGeom
     - added MGeomRectangle
     - added MGeomCamSquare

   * Makefile.rules:
     - removed dependance on ROOTSYS from rmkdepend. It should be in 
       the path anyway as rootcint

   * ceres.rc:
     - added an example of setting the APD type

   * mbadpixels/MBadPixelsCam.[h,cc], mbadpixels/MBadPixelsTreat.cc,
     mcalib/MCalibrationChargeCalc.cc, mcalib/MCalibrationTestCalc.cc,
     mfilter/MFSoftwareTrigger.cc:
     - replaced references to MGeomPix by references to MGeom

   * mbase/MStatusDisplay.cc:
     - evaluate the return code of fwrite as suggested by newer 
       gcc versions
     - set a paranthesis as suggested by a warning 

   * mgeom/MGeomCam.[h,cc]:
     - adapted to the changes in MGeomPix/MGeom
     - added SetAt function for external setup
     - added Copy constructor

   * mgeom/MGeomCamCT1.cc, mgeom/MGeomCamDwarf.cc, 
     mgeom/MGeomCamMagic.cc, mhft/MHexagonFreqSpace.cc,
     mimage/MHillas.cc, mimage/MHillasExt.cc,
     mimage/MImgCleanStd.[h,cc], mimage/MNewImagePar.cc,
     mimage/MNewImagePar2.cc, mmuon/MHSingleMuon.cc,
     msignal/MSignalCam.cc, mtools/MagicJam.cc,
     
     - adapted to the changes in MGeomPix/MGeom
     - use SetAt for setup

   * mgeom/MGeomPix.cc:
     - moved most of the code to new base class MGeom
     - now derives from MGeom
     - increased version number accordingly

   * mhbase/MBinning.cc:
     - replaced a Int_t by UInt_t as suggested by a warning

   * mhbase/MH.cc:
     - added a const_cast for GetObjectInfo (should be const,
       but isn't)

   * mhbase/MHMatrix.cc, mhflux/MHAlpha.cc, mhflux/MHThetaSq.cc,
     mhflux/MHThetaSqN.cc, mhist/MHCamEventRot.cc, hvstime/MHVsTime.cc,
     mjobs/MJStar.cc, mraw/MRawEvtHeader.cc:
     - added paranthesis as suggested by a warning

   * mhft/MGeomCamMagicXT.[h,cc]:
     - replaced by deriving from MGeomCamDwarf

   * mhist/MHCamera.cc:
     - adapted to the changes in MGeomPix/MGeom
     - use SetAt for setup
     - use new PaintPrimitive to skip the usage of MHexagon

   * mmc/MMcTrigHeader.hxx:
     - fixed wrong condition in SetTrigger

   * msimcamera/MSimAPD.[h,cc]:
     - added a possibility to switch between the 50mu and 100mu
       Diodes

   * mtools/MagicCivilization.[h,cc], mtools/MagicDomino.[h,cc],
     mtools/MagicReversi.[h,cc], mtools/MagicShow.[h,cc],
     mtools/MagicSnake.[h,cc], mtools/MineSweeper.[h,cc],
     - adapted to the changes in MGeomPix/MGeom, therefore restructered
       the code to get rid of MHexagon

   *  mmovie/MMovieWrite.cc:
     - allow to switch off timing via preprocessor directive
     - replaced MGeomPix by MGeom
     - slightly changed palette
     - evaluate return of fwrite

   * mbase/MQuaternion.h, msim/MPhotonData.h:
     - added a workaround for sqrt in root 5.18/00



 2009/02/26 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - implemented new SuperArehucas version



 2009/02/23 Thomas Bretz

   * mcorsika/MCorsikaRunHeader.cc:
     - switched off the impact max workaround - it doesn't work
     - initialize fImpact Max
     - print also number of used ATMEXT

   * mhbase/MH.cc:
     - improved setting of binning from the parameter list in the
       n-D case

   * mhbase/MH3.cc:
     - imporved output

   * mhflux/MHCollectionArea.cc:
     - also collect the maximum impact while running for a nicer
       behaviour of the plots

   * mhflux/MHThreshold.cc:
     - allow setting of a dedicated Threshold binning

   * mimage/MHHillasExt.cc:
     - converted slope binning to deg

   * mjobs/MJSimulation.cc:
     - write MMcCorsikaRunHeader
     - changed binnings
     - added new binning
     - now display the signal unscaled
     - show threshold and collection area only for data runs

   * msim/MSimMMCS.cc:
     - make setting of directions depending on view-cone option

   * msim/MSimPointingPos.[h,cc]:
     - added class description
     - removed obsolete fPointingCorsika
     - improved output
     - added option for homogenous distribution

   * mmuon/MMuonCalibParCalc.cc:
     - converted cuts from mm to deg so they will work also for other
       geometries



 2009/02/20 Thomas Bretz

   * mmuon/MHMuonPar.[h,cc]:
     - updated class version number after fMm2Deg got removed

   * mpointing/MHSrcPosCam.cc:
     - fixed the fill style of the ellipse to produce correct ps-files



 2009/02/19 Daniela Dorner

   * datacenter/scripts/buildsequenceentries, 
     datacenter/scripts/checkfilesforsequenceavail, 
     datacenter/scripts/checkstardone, datacenter/scripts/correcttime,
     datacenter/scripts/dbchk, datacenter/scripts/dodatacheck,
     datacenter/scripts/doexclusions, datacenter/scripts/fillcallisto, 
     datacenter/scripts/fillcamera, datacenter/scripts/fillganymed, 
     datacenter/scripts/fillstar, datacenter/scripts/insertdatasets, 
     datacenter/scripts/makecallistolinks, 
     datacenter/scripts/mcsequences, datacenter/scripts/movingrawfiles, 
     datacenter/scripts/movingrawfiles_OK, datacenter/scripts/runcamera,
     datacenter/scripts/runcorsika, datacenter/scripts/runreflector,
     datacenter/scripts/sourcefile, 
     datacenter/scripts/writedatasetfiles, 
     datacenter/scripts/writesequencefiles:
     - removed scriptlog

   * datacenter/scripts/jobmanager: 
     - fixed typo



 2009/02/19 Thomas Bretz

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - reformatted output
     - added "Options" to output
     - made Has const
     - added a workaround to get the maximum simulated impact
       although it is not officially stored in the file

   * msim/MHPhotonEvent.cc:
     - improved automatic binning

   * msim/MPhotonData.[h,cc]:
     - added GetCosW2
     - added GetSinW2
     - added GetSinW

   * msim/MSimAbsorption.cc:
     - don't check wavelength range when theta should be used

   * msimcamera/MSimAPD.cc:
     - check for uninitialized indices

   * msim/MPhotonEvent.[h,cc]:
     - moved the code for MyClonesArray to the source file
     - improved a lot the reading speed by reading larger blocks
       of data from the file at once
     - improved memory handling. This ensures that even the largest
       events don't fill the memory forever and the allocated memory
       is free'd again after some time

   * msimreflector/MSimReflector.cc:
     - Use the new Resize function of MPhotonEvent to make sure
       that the memory is not allocated forever.

   * mimage/MHHillas.cc, mimage/MMHillas.Ext.cc, mimage/MHHillasSrc.cc:
     - converted default binning from mm to deg

   * mraw/MRawRunHeader.cc:
     - print less when values doen't have any meaning

   * msim/MSimAtmosphere.[h,cc]:
     - added

   * msim/SimLinkDef.h, msim/Makefile:
     - added MSimAtmosphere

   * mjobs/MJSimulation.cc:
     - added simulation of atmosphere
     - clean isolated pixels away before calculating image parameters
     - don't clean calibration runs
     - correct displayed az by magnetic field
     - added auto range for the 2D histograms
     - set automatic binning for dist
     - added tab with histogram for trigger area and threshold

   * readcorsika.cc:
     - implemented -ff option

   * mcorsika/MCorsikaRunHeader.cc:
     - improved Print output

   * mimage/MImgCleanStd.cc:
     - fixed the checks for the cleaning parameters there 
       where some wrong conditions

   * msim/MSimMMCS.cc:
     - fixed typo in a comment

   * ceres.rc:
     - added units for psf
     - some small updates

   * msimreflector/MSimReflector.cc:
     - convert units of psf from mm to cm
     - Use MPointingPos instead of PointingCorsika, ARRANG already
       rotates all vectors accrodingly

   * msim/MSimPointingPos.cc:
     - don't write PoinitingCorsika anymore. ARRANg already includes
       the rotation

   * mgeom/MGeomCamMagic.[h,cc]:
     - added a constructor which allows to set the focal distance

   * msimcamera/MSimAPD.cc, msimcamera/MSimGeomCam.cc,
     msimcamera/MSimRandomPhotons.cc, msimreflector/MSimReflector.cc:
     - don't create an object if MGeomCam not found, try "MGeomCam"
       as default instead

   * mhflux/MHCollectionArea.[h,cc]:
     - added MMcRunHeader to data members to be able to check
       the maximum impact in Finalize for the case the maximum
       impect is collected "on-line" from the events
     - if the event distribution comes just from the spectrum fill
       the distribution event by event to get correct errors
     - romved some old obsolete code

   * msim/MSimMMCS.[h,cc]:
     - added MMcRunHeader to data members to allow to collect the
       maximum impact from the events



 2009/02/18 Thomas Bretz

   * datacenter/scripts/runcorsika:
     - added a comment

   * mbase/MParList.cc:
     - when adding a TCollectionn only add MParContainers

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added reading of Atmospheric coefficients
     - added reading of Cherenkov Flag
     - added corsika's Earth Radius

   * melectronics/MDigitalSignal.[h,cc]:
     - added and initialized an index to allow to "connect"
       the digital signal to a channel

   * mjtrain/MJTrainSeparation.cc:
     - replaced kGreen by kBlue

   * mmain/MEventDisplay.cc:
     - added a type==3 which is for ceres-reflector files

   * mmain/Makefile:
     - added -I../mcorsika
     - added -I../msim
     - added -I../msimcamera

   * msim/MHPhotonEvent.[h,cc]:
     - set the binning more automatically from the run-headers
       where possible
     - added RadEnv
     - added Clear function for external access

   * msim/MSimAbsorption.cc:
     - addec const-qualifier for photon

   * msimcamera/MSimGeomCam.cc:
     - allow usage also without pulse and pulse position (for display)

   * msimcamera/MSimSignalCam.cc:
     - allow usage also without TriggerPos
     - added a check whether MSignalCam was correctly initialized



 2009/02/16 Thomas Bretz

   * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc,
     mimage/MHImagePar.cc:
     - replaced green by blue for better readability on projectors

   * mbase/MEnv.[h,cc]:
     - added the option of a default name to allow i/o more similar
       to MParContainer
     - improved Print()

   * ceres.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
     - make use of the new default name of MEnv

   * mjobs/MJSpectrum.cc:
     - read and write ganymed.rc

   * mbase/MParList.cc:
     - if adding a TObjArray add only MParContainers (for sanity)

   * mjobs/MJob.cc:
     - when reading read also TObjects

   * mjobs/MJSpectrum.cc:
     - now read the ganymed.rc and write it to the output

   * mhflux/MHEffectiveOnTime.h:
     - increased class version by 1

   * mhflux/MHAlpha.cc:
     - removed erronornously comittet SetSumw2
     - don't output the numbe rof excess events vs time



 2009/02/15 Thomas Bretz

   * ceres.rc:
     - added the MAGIC I high gain pulse as example

   * sponde.cc:
     - redirect root error handler
     - added new option to force on-time fit

   * datacenter/scripts/runcorsika:
     - added a comment
     - remove empty dat file after corsika finished

   * mbase/MLog.cc:
     - added several more log-levels to handling root's error handler

   * mbase/MPrint.cc:
     - flush buffer before printing
     - set output level to all

   * melectronics/MPulseShape.h:
     - let clone also clone the spline

   * mfileio/MWriteRootFile.cc:
     - don't output title if empty

   * mhflux/MHEffectiveOnTime.[h,cc]:
     - added new data mebers to store the result of the overall-fit
       which is now done in Finalize
     - output the results of the effective on-time fit as inf2
     - increased clas version accordingly

   * mjobs/MJSimulation.[h,cc]:
     - simplified setting up the file structure

   * mjobs/MJSpectrum.[h,cc]:
     - added the possibility to force a new on-time fit.
     - a MHEffectiveOnTime histogram is now always displayed 
       for manual cross checks

   * mjobs/MJStar.cc:
     - added MSrcPosCam for Monte Carlos to output

   * mpointing/MSrcPosCalc.cc:
     - ignore the WobbleMode from the MMcCorsikaRunHeader 
       if it is a ceres file

   * msim/MPhotonEvent.[h,cc]:
     - added function GetTimeFirst
     - added function GetTimeLast
     - added function GetTimeMedianDev
     - added fLength to MPhotonStatistics

   * msimcamera/MSimGeomCam.cc:
     - make use of the new functions
     - set length to statistics container

   * mpointing/MHSrcPosCam.[h,cc], mpointing/MSrcPosRndm.[h,cc],
     mfilter/MFMagicCuts.[h,cc], mmuon/MHMuonPar.[h,cc],
     mhflux/MHThetaSqN.[h,cc]:
     - support changing geometries (conversion factors) reading
       a new geometry from a run header

   * mimage/MHVsSize.[h,cc], mimage/MHNewImagePar.[h,cc],
     mimage/MHHillasSrc.[h,cc], mimage/MHHillasExt.[h,cc],
     mimage/MHHillas.[h,cc], mimage/MNewImagePar2.[h,cc]:
     - removed option to set conversion factor manually
     - support changing geometries (conversion factors) reading
       a new geometry from a run header
     - increased class version by one

   * mhflux/MMcSpectrumWeight.cc:
     - replaced Form by MString::Format

     - made sure that nobody is mixing different energy-range monte
       carlos and normalizes by integral (to be implemented)

   * manalysis/MMcCalibrationUpdate.cc:
     - switched off file Ceres files (this might only be temporary
       but it makes the display work quite well even without
       calibrated units.

   * mjobs/MJCalibrateSignal.cc:
     - updated the rule to allow for file names without the leading date

   * mjobs/MJSpectrum.[h,cc]:
     - set the kMustCleanup bit for sanity
     - replaced a lot of Form by MString::Format
     - moved the getting of the right Alpha-histogram to GetHAlpha
     - the tlist2 doesn't neet to replace anything because all previous
       tasklists added to the list have been removed again
     - "DataType" already in parlist? Don't add a second one
     - replaced some gLog by fLog
     - make sure that the "Done." message is printed even in case
       no output is written at the end

   * ceres.rc:
     - added some more info

   * datacenter/scripts/runcorsika:
     - added magnetic field Azimuth direction (ARRANG), currently
       at ~ -7deg at La Palma

   * mbase/MLog.cc:
     - finallyadded a really stupid hack/workaround to suppress these
       annoying errors in case of a log-scale set too early

   * mbase/MTask.[h,cc]:
     - Replaced OverwritesProcess by Overwrites

   * mcorsika/MCorsikaEvtHeader.cc:
     - fixed particle momentum coordinate system

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added magnetic field values
     - improved output

   * mjobs/MJSimulation.cc:
     - updated height scale
     - use MPhotonStatistics.fLength
     - plot median dev of photon arrival times

   * mmc/MMcRunHeader.hxx:
     - added a getter IsCeres
     - added a setter for the Corsika Version

   * mpedestal/MMcPedestalCopy.cc:
     - use the new IsCeres

   * msim/MSimMMCS.[h,cc]:
     - use the telescope pointing in telescope coordinates for MMcEvt
     - correct the shower direction by the magnetic field azimuth
     - set corsika program version

   * msim/MSimPointingPos.[h,cc]:
     - splitted the output into coordinated in the corsika frame
       (module the magnetic field) and the poiting direction in
       telescope coordinates
     - added possibility to "observe" in off-target mode

   * msimreflector/MSimReflector.cc:
     - use new pointing direction in the corsika frame




 2009/02/13 Thomas Bretz

   * mcorsika/MCorsikaEvtHeader.h:
     - added some comments on the coordinate system

   * ceres.rc:
     - added some comments 
     - setup a psf for the dwarf mirror

   * mcorsika/MCorsikaRunHeader.h:
     - added some comments

   * mjobs/MJSimulation.cc:
     - added some histogram titles
     - fixed the x, y coordinates of the impact histogram
     - write "ElectronicNoise"

   * mjobs/MJStar.cc:
     - don't force writing of containers which are not filles by ceres
     - updated rule to support files without date

   * mpedestal/MPedestalPix.[h,cc]:
     - added Print() function

   * mraw/MRawFileRead.cc:
     - added a comment

   * msim/MPhotonData.h:
     - added comments about coordinate system

   * msimcamera/MSimGeomCam.cc:
     - when looking for the pixels convert from ceres-coordinates
       to GeomCam camera-coordinates

   * msimreflector/MMirror.h:
     - added Setter for SigmaPSF

   * msimreflector/MMirrorDisk.cc, msimreflector/MMirrorHex.cc,
     msimreflector/MMirrorSquare.cc:
     - now start counting in ReadM with 0

   * msimreflector/MReflector.[h,cc]:
     - added some documentation
     - added function to set psf of all mirrors
     - added psf optional to input file
     - remove already evaluated tokens from TObjArray
     - added reading of a default psf from the input file

   * mjobs/MSequence.cc:
     - fixed a bug in GetArrays which could cause seg-faults
     - added a sanity check



 2009/02/12 Thomas Bretz

   * datacenter/macros/fillsources.C:
     - updated

   * mfileio/MWriteRootFile.[h,cc]:
     - added some comments
     - renamed GetNewFileName to SubstituteName
     - made SubstituteName static

   * mhist/MHCamera.cc:
     - fixed the number in the legend (was wrong since last update)

   * mjobs/MDataSet.cc:
     - replaced From by MString::Format

   * mjobs/MJSimulation.cc:
     - a lot of things were renamed
     - the refelctor can now be set from the setup file
     - changed the binning for the event width
     - removed plot "CamShadow"
     - changed rules for file names

   * ceres.rc:
     - updated according to the changes in MJSimulation

   * mjobs/MSequence.cc:
     - replaced use of Form by MString::Format
     - allow non-setting of fNight
     - don't print period if -1

   * mmain/MEventDisplay.cc:
     - decode trigger pattern for display 

   * mmain/Makefile:
     - included mtrigger

   * msim/MHPhotonEvent.cc:
     - search Reflector instead of MReflector

   * msim/MSimAbsorption.cc:
     - added some info output

   * msimcamera/MSimAPD.[h,cc]:
     - added an option to set the geom cam name. Can be used to skip 
       this task

   * msimcamera/MSimCamera.[h,cc]:
     - allow to set BaselineGain from resource file

   * msimreflector/MSimReflector.cc:
     - removed CamShadow container
     - search Reflector instead of MReflector

   * Makefile:
     - removed mreflector

   * mcalib/MCalibrationPatternDecode.cc:
     - in case of pattern==0 and MCs set the color to CT1. This is
       a workaround because the bits don't allow to set is explicitly
     - removed the check for the kCT1Pulser bit. It can never be true
     - consequently removed the kCT1Pulser bit

  * mpedestal/MMcPedestalCopy.[h,cc]:
    - fixed for MUX MCs (the pedestal has to be scaled)
    - added option to process ceres data



 2009/02/11 Thomas Bretz

   * mcalib/MCalibColorSet.[h,cc]:
     - removed some obsolete break statements
     - removed obsolete gkMCRunLimit
     - fixed setting of signal strength for extremely old
       runs (I think we don't have them anyway)

   * mcalib/MCalibrateData.cc:
     - improved output

   * mcalib/MCalibrationChargeCalc.cc:
     - stop if no valid pulser colors have been found

   * mcorsika/MCorsikaRunHeader.h:
     - some cosmetics
     - added some getter

   * mhist/MHEvent.[h,cc]:
     - some improvements to output
     - implemented display for trigger pattern

   * mtrigger/MTriggerPattern.[h,cc]:
     - added Copy-function

   * mhist/Makefile:
     - added -I../mtrigger

   * mmc/MMcEvtBasic.[h,cc]:
     - moved the getter returning a TString to the source file
     - replaced Form by MString::Format

   * mraw/MRawRunHeader.cc:
     - initialize fSourceEpochChar[1]
     - initialize fNumEventsRead
     - suppress more output which has not been initialized
     - removed run-type from SetRunInfo
     - added new function SetRunType
     - use strncpy instead of memcpy
     - replaced const char[] arguments by TString

   * msimreflector/MReflector.[h,cc]:
     - added Print
     - added a circle around the mirror showing fMaxR

   * mastro/MAstro.cc:
     - updated some typos in comments

   * mbase/MEnv.cc:
     - replaced Form by MString::Format

   * mbase/MTask.cc:
     - made the total number of executions really count the total 
       number

   * mcalib/MCalibrationPatternDecode.cc:
     - some cosmetics
     - corrected the use of a wrong FindCreateObj

   * mcorsika/MCorsikaRead.cc:
     - added a comment

   * mfileio/MWriteRootFile.cc:
     - improved output
     - improved the copy of a tree (now done without unpacking)
     - made sure that copied trees are shown in the summary
     - made sure that the copied trees are nevertheless deleted

   * mfilter/MFDeltaT.cc:
     - adapted to change in GetNumExecutions

   * mhbase/MFillH.cc:
     - set the number of executions (as it is in MTask) before the
       execution

   * mhbase/MH.cc:
     - improved the statistics output

   * mhist/MHCamera.[h,cc]:
     - don't create an own pad anymore
     - removed SetRange
     - SetRange now done via MH::SetPadRange
     - some sanity checks if fGeomCam is set
     - some adaptions to the new layout scheme without
       an own pad
     - Changed DrawProjection to a more commonly usable scheme
     - Removed all dependencies from MGeomCamMagic
     - start the gaus fit with the maximum not the integral

   * mjobs/MJCalibrateSignal.cc:
     - If the input files contain an OriginalMC tree 
       copy it
     - consequently we make the MMcEvtBasic from the 
       parameter-list optional
     - fixed the rule (MC files with .root as extension could not 
       be processed)

   * mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.[h,cc]:
     - Use MHCamera::CamDraw more extensively
     - replace use of Form by MString::Format

   * mjobs/MJSimulation.cc:
     - added an option to switch the cmaera electronics off
     - write some more containers to output file (for easy access)
     - set the MC bit in the header
     - now use MSimMMCS to "fake" the correct file structure
     - added three new writers to write the MMcEvtBasic information
     - added a display of the most important things

   * mmain/MEventDisplay.cc:
     - don't change into the not more existing pad of a MHCamera

   * msimcamera/MSimCalibrationSignal.cc:
     - adapted GetNumExecution
     - SetReadyToSave for the run header
     - jitter the number of emitted photons
     - corrected the emitted trigger positon
     - (re)set calibration pattern

   * mbase/MLut.[h,cc]:
     - added overload of Delete() function
     - added IsDefault
     - added SetDefault

   * mfileio/MWriteRootFile.cc:
     - fixed output in OpenFile

   * mjobs/MSequence.cc:
     - allow the "Night" resource to be empty

   * msimcamera/MSimBundlePhotons.cc:
     - some small improvements in case of empty maps

   * msimcamera/MSimReadout.[h,cc]:
     - reset gain. Use the new fConversionFactor instead
     - removed some setting of fRunHeader

   * msimcamera/MSimTrigger.[h,cc]:
     - on useer request now offset and gain can be used to 
       convert the signal back into units of phe
     - added possibility to use empty lookup tables
     - added debug output

   * msimcamera/MSimCamera.[h,cc]:
     - outsourced the pedestal and gain numbers into ReInit
     - use an MPedestalCam for Electronic Noise and Gain
     - allow to switch ob whether the gain is applied to the 
       electronic noise or not
     - SetPhotElfromShower

   * msim/Makefile. msim/SimLinkDef.h:
     - added MSimMMCS

   * msim/MSimMMCS.[h,cc]:
     - added

   * msimcamera/Makefile:
     - added -I../mpedestal

   * ceres.rc:
     - added

   * msimreflector/MMirrorSquare.cc, msimreflector/MMirrorHex.cc,
     msimreflector/MMirrorDisk.cc:
     - changed the grey colors

   * msimreflector/MMirrorHex.cc:
     - fixed bugs in CanHit and HasHit



 2009/02/10 Thomas Bretz

   * manalysis/MMcTriggerLvl2Calc.cc:
     - removed obsolete include of MmcRunHeader

   * mbase/MSpline3.[h,cc]:
     - improved the available constructors
     - added some comments for future use
     - added default constructor
     - added GetHistogram()

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added fImpactMax
     - added some Getters

   * melectronics/MPulseShape.[h,cc]:
     - set class version to 1 to make it storable
     - set a title for the splines
     - implemented Paint function

   * mhbase/MH.[h,cc]:
     - added SetPadRange

   * mhist/MHCamEvent.[h,cc]:
     - Init the geometry in ReInit thus it can work with a geometry stored in a file
     - Make sure that histogranms already drawn properly to a pad are found in Paint
     - added RecursiveRemove for sanity

   * mmc/MMcCorsikaRunHeader.h:
     - added SetSpectrum

   * mmc/MMcEvt.hxx:
     - added SetEvtNumber
     - added SetPhotElfromShower

   * mmc/MMcEvtBasic.[h,cc]:
     - added operator=

   * mmc/MMcRunHeader.[hxx, cxx]:
     - set default for the versions to UShort_t(-1)
     - added some comments 
     - added SetNumSimulatedShowers
     - added SetImpactMax

   * mraw/MRawRunHeader.cc:
     - suppress some information in header if not valid

   * msignal/MSignalCalc.cc:
     - if (!fPedestal) we should return kTRUE not kFALSE

   * msimreflector/MMirror.[h,cc], msimreflector/MMirrorDisk.[h,cc],
     msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MReflector.[h,cc],
     - added Print
     - some cosmetics in header
     - set class version to 1 to make it storable

   * mtools/MagicJam.cc:
     - updated



 2009/02/10 Daniela Dorner

   * datacenter/db/tabs.php:
     - if csv-file doesn't exist, only logs are displayed now



 2009/02/08 Thomas Bretz

   * Makefile.conf.linux:
     - added -Winit-self

   * msimcamera/MSimCalibrationSignal.[h,cc]:
     - account for the pulse shape/width
     - make number of photons settable
     - make time jitter settable
     - renamned fNumEntries to fNumEvents
     - don't set daq event number (should be set by the "daq")
     - set trigger pattern
     - print number of events in PreProcess

   * msimreflector/MSimReflector.[h,cc]:
     - made the detector margin settable

   * datacenter/macros/insertcacofile.C, datacenter/macros/insertsequence.C:
     - print an error and exit

   * macros/optim/optimdisp.C:
     - set the default values as default
     - added a short summary what a good strategy for optimization is

   * mastro/MAstro.cc:
     - replaced Form by MString::Form

   * mcorsika/MCorsikaEvtHeader.[h,cc], mcorsika/MCorsikaRunHeader.[h,cc]:
     - moved fParticleID from event header to run header
     - increased Class Version accordingly
     - added an error if more than one observation levels are read

   * mhcalib/MHGausEvents.cc:
     - replaced Form by MString::Form
     - handle the creating of the TF1 fExpFit a bit more "root-safe"

   * mhist/MHCamEvent.[h,cc]:
     - added a new option to collect the maximum or minimum contents

   * mhist/MHCamera.[h,cc]:
     - added new functions SetMax/MinCamContent

   * mraw/MRawEvtHeader.cc:
     - initialize the data members in constructor

   * mraw/MRawEvtHeader.h:
     - removed bits for trigger type they were never used

   * mraw/MRawRunHeader.cc:
     - tiny cosmetics

   * msim/MHPhotonEvent.[h,cc]:
     - added a histogram to display the height
     - don't fill kNightSky photons

   * msim/MPhotonData.h:
     - added getter for fProductionHeight

   * msim/MPhotonEvent.h:
     - commented IsValid (was not used anyhow)

   * msimcamera/MSimGeomCam.[h,cc]:
     - added one sample to the window to allow for time jitter of one sample
     - make the code for the window indentical to MSimCalibrationSignal

   * msimcamera/MSimReadout.[h,cc]:
     - Set the daq event number (readout number)

   * msimcamera/MSimTrigger.[h,cc]:
     - added comments
     - made the signal length settable
     - made the coincidence time settable
     - removed setting of the daq event number (should be done by the "daq")
     - changed the trigger output from all to inf/inf2

   * msimcamera/Makefile:
     - added -I../mtrigger

   * mjobs/MJSimulation.[h,cc]:
     - added new mode to force the use of the trigger "electronics"
     - moved setup of the fadc to the resource file
     - added a new histogram to show the maximum signal in all pixels
     - automatically setup the range of the TrigPos histogram
     - don't show all histograms in all run conditions

   * mraw/MRawRunHeader.[h,cc]:
     - added ReadEnv for a setup from a resource file in ceres

   * msimcamera/MSimAPD.cc:
     - added a sanity check if ReInit has not been called



 2009/02/07 Thomas Bretz

   * sponde.rc:
     - fixed a typo

   * datacenter/scripts/runcorsika:
     - added a comment

   * mbase/MContinue.h:
     - changed a comment

   * mbase/MEnv.h, mbase/MMath.cc:
     - Do not assign a temporary TString to const char *

   * mcamera/MCameraCentralPix.[h,cc]:
     - changed fDC from Float_t to Int_t 

   * mhflux/MHCollectionArea.cc, mhflux/MHDisp.cc, mhflux/MHEnergyEst.cc,
     mhflux/MHFalseSource.cc, mhflux/MHThreshold.cc, mhbase/MFillH.cc,
     mastro/MAstroCamera.cc, mastro/MAstroCatalog.cc, mbase/MContinue.cc,
     mbase/MFilter.cc, mbase/MLog.cc, mbase/MParContainer.cc, mhbase/MH.cc,
     mbase/MParEmulated.cc, mbase/MStatusDisplay.cc, mbase/MTime.cc,
     mhbase/MH3.cc, mhbase/MHn.cc,mhflux/MHAlpha.cc, mhist/MHCamera.cc,
     mhflux/MHEffectiveOnTime.cc, mmuon/MHMuonPar.cc, mmovie/MMovieWrite.cc,
     mhflux/MHFalseSource.cc, mhist/MHCamEvent.cc, 
     mmain/MEventDisplay.cc, mreflector/MHReflector.cc:
     - use MString::Format instead of Form

   * msim/MHPhotonEvent.cc:
     - don't fill kNightSky primaries

   * msim/MPhotonEvent.[h,cc]:
     - return the number of non NightSky photons

   * msimcamera/MSimPSF.cc:
     - changed default for fSigma from 1 to -1

   * mbase/MContinue.cc:
     - changed default title

   * mfileio/MWriteRootFile.cc:
     - set kMustCleanup bit, otherwise it is not correctly deleted from
       the list of cleanups

   * mhbase/MH3.[h,cc]:
     - added RecursiveRemove

   * mhflux/MAlphaFitter.[h,cc]:
     - moved code to source file
     - improved setting of a new fFunc

   * mhflux/MHAlpha.[h,cc], mhvstime/MHSectorVsTime.[h,cc]
     - added RecursiveRemove

   * mjobs/MJSimulation.cc:
     - added MSimPSF
     - Show only the non NightSky photons in the size plot
     - changed the binning of BinningEvtWidth



 2009/02/06 Daniela Dorner

   * datacenter/db/include.php:
     - adapted status-query



 2009/02/05 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - implemented new SuperArehucas version



 2009/02/03 Thomas Bretz

   * mastro/MAstroCatalog.[h,cc]:
     - searches now all catalogs also in the datacenter default path if
       the file could not be found

   * mbase/MStatusDisplay.cc:
     - also print information about added tabs in batch mode

   * mcorsika/MCorsikaEvtHeader.h:
     - fixed a comment

   * mfileio/MWriteRootFile.cc:
     - added some more log-output
     - open a new /dev/null only if none with the same title already exists
     - added some comments

   * mhflux/MHEffectiveOnTime.cc:
     - Don't call PaintText if FitH failed (as suggested by valgrind)

   * mjobs/MJStar.cc, mjobs/MJCalibrateSignal.cc:
     - added a title to all MWriteRootFile

   * mreport/MReportCC.cc:
     - added more comments
     - improved log-output



 2009/02/03 Daniela Dorner

   * datacenter/db/plotdb.php:
     - sequence as default when startup

   * datacenter/db/plotdb.php, datacenter/db/plot.php:
     - added possibility to set size of plot



 2009/02/03 Stefan Ruegamer

   * datacenter/scripts/budb:
     - added getdbsetup



 2009/02/02 Thomas Bretz

   * mcamera/MCameraCentralPix.[h,cc]:
     - added data member fDC
     - increased class version number accordingly

   * mreport/MReportCC.cc:
     - improved debug output
     - remove minus from the third argument in SCHEDULE

   * mreport/MReportCamera.[h,cc]:
     - fixed for ver>=200812140
     - added InterpretePSSEN
     - added InterpreteLIQ

   * msimcamera/MSimCamera.cc:
     - added a time-shift uniformly according to the bin-width



 2009/01/30 Thomas Bretz

   * RELEASE V2.2


 2009/02/02 Thomas Bretz

   * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
     - fixed the regular expresssion



 2009/01/30 Thomas Bretz

   * datacenter/macros/fillcmt.C:
     - added

   * datacenter/macros/plotstat.C:
     - extended loop to show all periods again

   * msim/MPhotonData.cc:
     - don't change the sign of the cosines. The direction of the
       particle doesn't neet to be changed

   * msimreflector/MSimReflector.cc:
     - change the rotation matrix to fit the change in MPhotonData



 2009/01/29 Thomas Bretz

   * melectronics/MPulseShape.cc:
     - changed spline range from -25/25 to -8/8

   * mhflux/MAlphaFitter.cc, mhflux/MHAlpha.cc, mhflux/MHDisp.cc:
     - for sanity (thread safety) replaced Form by MString::Format

   * mhflux/MHDisp.cc:
     - initialize fHalf as suggested by valgrind

   * datacenter/macros/plotdb.C:
     - updated comments

   * resources/calibration_spline.rc:
     - updated



 2009/01/27 Thomas Bretz

  * macros/rootlogon.C:
     - added new subdirectories

   * melectronics/MAnalogSignal.[h,cc]:
     - added the posssibility to add a pulse from a TF1
     - removed the printout if out of range
     - returns whether the range had to be adapted
     - changed the Discriminate function to allow for giving a start
       and end time of the search
     - imporved the fining of the falling and rising edge
     - removed the printout in Discriminate

   * msimcamera/MSimCamera.[h,cc]:
     - moved the pulse shape specific code into a new class MPulseShape
     - Fixed the range of the digitization

   * melectronics/MPulseShape.[h,cc]:
     - added

   * melectronics/Makefile, melectronics/ElectronicsLinkDef.h:
     - added MPulseShape

   * msimcamera/MSimGeomCam.[h,cc]:
     - Fixed the time window for random photons (Maybe move to a later
       step in the analysis?)

   * msimcamera/MSimReadout.cc:
     - call SetReadyToSave for the run-header
     - added some debug output in case of failure

   * msimcamera/MSimSignalCam.[h,cc]:
     - subtract the trigger position of any

   * msimcamera/MSimTrigger.cc:
     - some changes to the debug output

   * mjobs/MJSimulation.[h,cc]:
     - added

   * mjobs/Makefile, mjobs/JobsLinkDef.h:
     - added MJSimulation

   * ceres.cc, showlog.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
     - added parenthesis suggested by compiler

   * mbase/MParEnv.cc:
     - included TClass for newwer root versions

   * msimreflector/MReflector.cc:
     - fixed return if read file was not existing

   * msimrelfector/MSimReflector.cc:
     - added sanity check if reflector is valid

   * datacenter/macros/insertdataset.C:
     - added fPriority

   * datacenter/macros/plotoptical.C:
     - write a root-file as the other plot-macros do

   * mreflector/MHReflector.cc:
     - added some SetDirectory(NULL), although this class is a candidate
       for removal

   * mjobs/MJCut.cc, mjobs/MJCalibrateSignal.cc:
     - make the CheckEnv fail if kFALSE is returned



 2009/01/26 Thomas Bretz

   * Makefile:
     - added mcorsika, msim, msimreflector, msimcamera and
       msimelectronics
     - added readcorsika

   * mbase/Makefile, mbase/BaseLinkDef.h:
     - added MParEnv

   * mbase/MParEnv.[h,cc]:
     - added

   * mbase/MParameters.[h,cc]:
     - added ReadEnv to all classes

   * mbase/MParList.cc:
     - return the container within MParEnv if MParEnv found 

   * mbase/MParContainer.cc:
     - fixed a typo

   * manalysis/MEventRateCalc.cc:
     - added a comment

   * melectronics/MAnalogChannels.[h,cc]:
     - made the GetNum* unsigned
     - added new member functions to just initialize one size

   * mraw/MRawRunHeader.[h,cc]:
     - added a possibility to just init the number of pixels

   * msimcamera/MSimReadout.[h,cc]:
     - get the number of output channels from the camera geometry
     - initialize the runheader in ReInit
     - initialize the data arrays from the run-header in reinit

   * mimage/MHHillas.cc:
     - the default binning is not scales by 0.9 anymore

   * mmc/MMcEvtBasic.h:
     - added new type "artificial" 

   * mraw/MRawRunHeader.cc:
     - set header size in constructor to 0

   * msimcamera/MSimCalibrationSignal.[h,cc]:
     - we need fEvt and fTrigger always
     - renamed ReInit to CallReInit
     - set photon primary type
     - set number of photons from 50 to 5

   * msimcamera/MSimRandomPhotons.cc:
     - explicitly set weight to 1

   * mjobs/Makefile:
     - added msim, msimreflector, msimcamera and mcorsika



 2009/01/25 Thomas Bretz

   * mbase/Makefile, mbase/BaseLinkDef.h:
     - added MLut

   * mbase/MLut.[h,cc]:
     - added

   * msimcamera/MSimCamera.[h,cc], msimcamera/MSimTrigger.[h,cc],
     msimcamera/MSimRadout.[h,cc], msimcamera/SimCameraLinkDef.h,
     msimcamera/Makefile, msimcamera/MSimCalibrationSignal.[h,cc],
     msimcamera/SimCameraIncl,h:
     - added

   * mjobs/MJob.cc:
     - included TClass for newer root versions

   * mreflector/MRflEvtData.cc:
     - repaced a use of MHexagon by a direct use of MGeomCam

   * melectronics/MAvalanchePhotoDiode.[h,cc]:
     - added some getters
     - remobved some obsolete comment
     - set entries to 1 by default

   * mgeom/MGeomCam.[h,cc]:
     - split the Get[Max,Min]Radius into two member functions
     - added the HitDetector based on the maximum radius calculated

   * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
     - removed overloading of the new HitDetector

   * mgeom/MGeomPix.[h,cc]:
     - reset fUserBits in constructor according to a suggestion by valgrind
     - added GetT member function

   * mjobs/MJSpectrum.cc:
     - replaced some Form calls for sanity by MString::Format
     - check the result of CheckEnv

   * mjobs/MJStar.cc:
     - check the result of CheckEnv

   * mjobs/MJob.cc:
     - fixed a typo in the name for the seed value resource

   * mraw/MRawRunHeader.h:
     - added a getter for run type point run

   * msignal/MSignalCalc.cc:
     - don't execute Process at all if fPedestal==NULL

   * msignal/MSignalCam.cc:
     - aded case 10 and 11 to GetPixelContent

   * msim/MHPhotonEvent.cc:
     - replaced case 4 by using the traversal distance in the 0-pixel

   * msimcamera/MSimSignalCam.cc:
     - set pixel only to used if contents>0

   * msimcamera/MSimTrigger.[h,cc]:
     - added ReadEnv for setup from a resource file
     - compress the trigger list after deleting slots
     - initialize descriminator threshold with -1
     - check for the validity of the discr. th in PreProcess

   * msimreflector/MReflector.[h,cc]:
     - store file name in title
     - added ReadEnv for setup from a resource file

   * msimreflector/MSimReflector.[h,cc]:
     - changed copyright notice
     - added fDetectorMargin




 2009/01/24 Thomas Bretz

   * mbase/MMath.cc:
     - added two explicit conversion to make it compile on my Ubuntu
     - Replaced some Form by MString::Format
     - included MString



 2009/01/23 Daniela Dorner

   * datacenter/db/showplots-ds.php, datacenter/db/tabs.php, 
     datacenter/db/plot.php:
     - adapted path to new web file structure

   * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php:
     - added option to group by date (year, month, night): pulldown in
       menu and adapted query

   * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php
     datacenter/db/datasetinfo-aio.php:
     - enabled possibility to combine all group-bys 

   * datacenter/db/datasetinfo-aio.php:
     - enhances information printed in table in case of group-by

   * datacenter/db/include.php:
     - adapted pulldown of status-group-by

   * datacenter/db/menu.php:
     - added pulldown for sumtrigger-flag to sequinfo-menu
     - added function to print pulldown for group-by date



 2009/01/23 Thomas Bretz

   * mcorsika/MCorsikaEvtHeader.[h,cc], msim/MPhotonData.[h,cc],
     msimcamera/MSimExcessNoise.cc, msimreflector/MMirrorDisk.cc,
     msimreflector/MMirrorHex.cc, msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MReflector.cc, msimreflector/MSimReflector.cc,
     melectronics/MAnalogSignal.cc:
     - moved code which needs TMath to source file
     - included TMath for newer root versions
     - included TObjArray for newer root versions

   * msimcamera/MSimAPD.[h,cc], msimcamera/MSimBundlePhotons.[h,cc], 
     msimcamera/MSimRandomPhotons.[h,cc]:
     - added

   * melectronics/Makefile, melectronics/MAnalogChannels.[h,cc],
     melectronics/ElectronicsIncl.h, melectronics/ElectronicsLinkDef.h, 
     melectronics/MDigitalSignal.[h,cc],  
     melectronics/MAnalogSignal.[h,cc], 
     melectronics/MAvalanchePhotoDiode.[h,cc]:
     - added

   * msim/M*.cc, msimreflector/M*.cc, msimcamera/M*.cc:
     - changed copyright notice

   * mjobs/MJob.[h,cc]:
     - for convinience replaced GetEnvValue by GetEnvValue2
     - added initialization of the random number generator

   * ceres.cc, mcorsika/CorsikaIncl.h:
     - added



 2009/01/22 Thomas Bretz

   * mraw/MRawRunHeader.h:
     - added new functions to access the runtype

   * msim/MPhotonData.cc:
     - removed some obsolete comments

   * msim/MPhotonEvent.[h,cc]
     - added some comments
     - added new member function GetFirst and GetLast
     - UnSort the array after reading new data
     - removed some old obsolete code
     - added new meber function Sort and IsSorted

   * msimreflector/MSimReflector.cc:
     - force sorting of the array

  * msimcamera/MSimPSF.[h,cc], msimcamera/MSimGeomCam.[h,cc], 
    msimcamera/MSimExcessNoise.[h,cc], msimcamera/MSimSignalCam.[h,cc]:
    - added



 2009/01/21 Thomas Bretz

   * mbase/BaseLinkDef.h, mbase/Makefile:
     - added MQuaternion
     - added MReflection

   * mbase/MQuaternion.[h,cc], mbase/MReflection.[h,cc]:
     - added

   * mbase/MArrayI.[h,cc]:
     - added a few new functions (ReSort, Add, Find and AddUniq)

   * mbase/MMath.cc:
     - replaced delete by delete[] where appropriate

   * mgeom/MGeomCam.h:
     - added new virtual functions HitFrame and HitDetector
     - included MQuaternion

   * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
     - added new functions HitFrame and HitDetector:

   * msim/MHPhotonEvent.cc:
     - removed the reference to MCamera

   * mgeom/MGeomPix.[h,cc], mgui/MHexagon.[h,cc]:
     - moved DistanceToPrimitive from MHexagon to MGeomPix
     - moved the funtions to calculate overlapping areas 
       also, but they are still in a comment

   * mgui/MHexagon.[h,cc]:
     - started implementing a rotation angle
     - added data meber fPhi
     - increased class version number

   * mhist/MHCamera.cc, mtools/MagicJam.cc:
     - we don't have to use a MHexagon anymore caluclating 
       DistanceToPrimitive

   * msimreflector/MMirror.[h,cc], msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorDisk.[h,cc],
     msimreflector/MReflector.[h,cc], msimreflector/MSimReflector.[h,cc],
     msimreflector/Makefile, msimreflector/SimReflectorLinkDef.h, 
     msimreflector/SimReflectorIncl.h:
     - added



 2009/01/21 Stefan Ruegamer

   * datacenter/scripts/read_lapalma-tapes:
     - added check of the tape slot when exporting the tapes



 2009/01/20 Thomas Bretz

   * mjobs/MJob.h:
     - added Esc member function

   * msim/MPhotonData.[h,cc], msim/MPhotonEvent.[h,cc], 
     msim/MSimAbsorption.[h,cc], msim/MSimPointingPos.[h,cc],
     MHPhotonEvent.[h,cc], msim/Makefile, msim/SimIncl.h 
     msim/SimLinkDef.h:
     - added


 2009/01/19 Thomas Bretz

   * mfileio/MWriteRootFile.cc:
     - simplified how the rules are evaluated using TPregexp
     - by this the rules got more powerful

   * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
     - changed ols style rule to new style



 2009/01/18 Thomas Bretz

   * mbase/BaseLinkDef.h, mbase/Makefile:
     - added MSpline3

   * mcorsika/MCorsikaEvtHeader.cc:
     - some little cosmetics

   * mcorsika/MCorsikaEvtHeader.h:
     - added some missing getters

   * mcorsika/MCorsikaRunHeader.cc:
     - removed some obsolete comments
     - reordered some comments

   * mextralgo/MExtralgoSpline.h:
     - changed default in GetIntegral from true to false

   * mraw/MRawEvtHeader.h:
     - added Setter for DAQEventNumber

   * mraw/MRawRunHeader.cc:
     - start pixel hardware indices with 1 not with 0



 2009/01/17 Thomas Bretz

  * mbase/MMath.[h,cc]:
     - added a new function RndmExp which should be a tiny bit faster than
       root's own implementation because it ises Rndm() instead of Uniform()

   * mextralgo/ExtralgoIncl.h:
     - added MArrayF

   * mextralgo/MExtralgoSpline.[h,cc]:
     - divided FindY into FindYup and FindYdn to avoid an obsolete if-clause
     - added a new member function to return the integral function of the
       spline. This is useful to init a new spline and use it for 
       producing the proper random distribution.

   * mpedestal/MPedestalSubtractedEvt.[h,cc]:
     - added Print() function

   * mraw/MRawEvtData.[h,cc]:
     - added a member function to Reset the arrays
     - added member function to set the pixel indices
     - Improved the new Set function

  * readcorsika.cc:
    - added



 2009/01/16 Daniel Hoehne-Moench

   * datacenter/scripts/mcsequences:
     - implemented sumtrigger -> modes, fTriggerFlagKEY
     - fPriority(MCSequenceProcessStatus) is now filled into the mcdb

   * datacenter/scripts/fillmccallisto, fillmcstar:
     - bugfix: changed argument of $primaries from [$s+$s] to [$s]

   * datacenter/macros/fillcamera.C:
     - changed NumPheFromDNSB to float(7,3)
     - fPriority(MCRunProcessStatus) is now filled into the mcdb

   * datacenter/macros/fillmccalib.C:
     - minor changes, bugfix (wrong column name for mcdb)

   * datacenter/macros/fillmcsignal.C:
     - definition of some parameters changed according to fillsignal.C
     - minor changes, deleted unnecessary code
     - implemented if clause for HiLo-Parameters. Instead of 
       seqno<200000 the fAmplFadcKEY is queried in the mcdb for each
       sequence. For MUX MCs the HiLo-Parameters are not calculated.



 2009/01/15 Thomas Bretz

   * callisto.cc:
     - cosmetics to output

   * mcorsika/MCorsikaRunHeader.cc:
     - cosmetics (removed a ;;)

   * mhist/MHEvent.[h,cc]:
     - ReInit to allow the change of the camera geoemtry in ReInit



 2009/01/15 Stefan Ruegamer

   * datacenter/scripts/dodatacheck:
     - removed the _E in the find command; files from 2008/06/04 on do
       not have it any more



 2009/01/14 Daniel Hoehne-Moench

   * datacenter/scripts/sourcefile:
     - extended errorcoding on mc run process status

   * datacenter/scripts/runmccallisto, runmcstar:
     - deleted unnecessary lines, adapted to primary structure

   * datacenter/macros/fillmcsignal.C, fillmccalib.C, fillmcstar.C:
     - added

   * datacenter/scripts/fillmccallisto, fillmcstar:
     - added



 2009/01/14 Thomas Bretz

   * readraw.cc:
     - check first whether the file exist before adding the extension

   * mbase/MMath.[h,cc]:
     - added function to Re-sort an array

   * mfileio/MReadMarsFile.cc, mfileio/MWriteRootFile.cc:
     - Improved output

   * mfileio/MWriteRootFile.cc:
     - fixed a problem which prevented to open more than one /dev/null
       devices independantly

   * mgeom/MGeomCam.cc:
     - cosmetics

   * mgeom/MGeomCamDwarf.h:
     - fixed a typo in an ifdef

   * mgeom/MGeomPix.[h,cc]:
     - added funtion to return positon as TVector2
     - slightly improved the algorithm to check IsInside
     - fixed the conditional signs for the orientation of pixels
       in GetDirection

   * mmain/MEventDisplay.cc:
     - Give different names to the MPedestalSubtract tasks
     - fixed buttons
     - call AddGeometryTags after ReInit to allow reading new geometries in
       ReInit

   * mmc/MMcEvtBasic.h:
     - added a new primary type kNightSky

   * mraw/MRawEvtPixelIter.h:
     - replaced type of the number of bytes by UInt_t

   * mraw/MRawRunHeader.h:
     - allow to validate the magic-number from outside (for MCs)

   * datacenter/scripts/runcorsika:
     - added a lot of comments
     - reordered values in input card
     - switched off a lot of obsolete output
     - changed the Magnetic field to a value corresponding to the location of
       MAGIC at 2200m height valid for January 2009. (The old value never took
       place there?!) The value was taken from www.noaa.gov/geomagmodels



 2009/01/12 Daniel Hoehne-Moench

   * datacenter/db/menu.php:
     - bugfix: now the SumTriggerFlag is correctly displayed in the web
       interface



 2009/01/09 Daniel Hoehne-Moench

   * datacenter/macros/fillcamera.C
     - implemented new variables: zbinmin, zbinmax, number of 
       sumtriggers, sum trigger flag
     - bugfix: for P and C runs the mirror fraction and the impact
       parameter had unreasonable values (negative) which were filled
       into the mcdb, now->0

   * datacenter/scripts/fillcamera, mcsequences:
     - implemented call of getdbsetup



 2009/01/09 Stefan Ruegamer

   * datacenter/scripts/buildsequenceentries
     - corrected IFS argument



 2009/01/08 Stefan Ruegamer

   * datacenter/scripts/filesondisk
     - added S and N runs



 2009/01/07 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - updated column counting numbers
     - included a check for the number of columns in the runfiles
   
   * datacenter/macros/buildsequenceentries.C:
     - implemented SumTriggerFlagKEY for sequence building



 2009/01/06 Thomas Bretz

   * mbase/MArrayB.h, mbase/MArrayD.h, mbase/MArrayF.h,
     mbase/MArrayI.h, mbase/MArrayS.h:
     - removed GetSize

   * mbase/MArrayF.h:
     - added Add()
     - added AddClipped

  * mbase/MMath.[h,cc]:
     - implemented ReSort

   * mcorsika/MCorsikaEvtHeader.cc:
     - removed obsolete comments

   * mcorsika/MCorsikaRead.cc:
     - cosmetics

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added comments about file contents
     - added fWavelengthMin/Max

   * mextralgo/MExtralgoSpline.[h,cc]:
     - renamed SearchY to SearchYdn
     - fixed a problem in SearchYup (must be ++i instead of i++)
       (this is relatively unimportant because it was only used
        in the determination of the pulse width which we never
        really used)
     - added a sanity/range-check to SearchYup and SearchYdn
     - added a comment
     - changed the order of arguments in EvalDeriv1
     - changed the order of arguments in EvalDeriv2
     - accelerated EvalDeriv1 (one multiplication less)
     - added Deriv1 function 
     - made SearchYup and SearchYdn public

   * mjobs/MDataSet.cc:
     - removed an obsolete return statement

   * mraw/MRawEvtData.[h,cc]:
     - changed pointer in AddPixel to reference
     - added a Set function

   * mraw/MRawRunHeader.[h,cc]:
     - added a lot of fixes for wrong run numbers written by Arehucas
     - added a fix for strange file numbers written by Arehucas
     - added functions as monta carlo interface to set contents

   * msignal/MSignalCam.cc:
     - defined a case 9



 2009/01/05 Thomas Bretz

   * mhbase/MH.h:
     - commited missing changes from last year

   * merpp.cc:
     - fixed a description

   * sponde.cc:
     - added "Multiple dataset at once"

   * star.cc:
     - removed obsolete -ff option from output

   * mbase/MTime.[h,cc]:
     - added GetBinary
     - added WriteBinary

   * mbase/MEvtLoop.cc:
     - display paused status in status line
     - improved pause handling