source: trunk/MagicSoft/Mars/Changelog@ 9436

Last change on this file since 9436 was 9436, checked in by tbretz, 15 years ago
*** empty log message ***
File size: 63.1 KB
Line 
1Please do not write behind the end of line tag so that it is possible
2to send a Changelog file to a line printer directly. Thanks.
3
4For your entries please follow EXACTLY this style:
5
6_yyyy/mm/dd_[Your Name]
7_
8___*_filename:
9_____-_description
10_
11___*_filename2, filename3:
12_____-_description
13_
14_
15_
16
17While an underscore is a placeholder for a white-space or an empty line.
18
19 -*-*- END OF LINE -*-*-
20 2009/04/29 Thomas Bretz
21
22 * msimcamera/Makefile:
23 - added -I../msimreflector
24
25
26
27 2009/04/28 Thomas Bretz
28
29 * mjobs/MJStar.cc:
30 - allow to run thru even if discriminator threshold are missing
31
32
33
34 2009/04/26 Thomas Bretz
35
36 * mraw/MRawFileRead.cc:
37 - added consistency check for two consecutive headers
38
39 * mraw/MRawRunHeader.[h,cc]:
40 - added copy constructor
41 - added member function for conistency check
42
43
44
45 2009/04/16 Thomas Bretz
46
47 * mbase/MEvtLoop.cc:
48 - make sure that no negative values for the estimated time
49 is shown
50
51 * mcorsika/MCorsikaEvtHeader.cc:
52 - calculate impact in the telescope dish plane and not on the
53 ground
54
55 * mhflux/MHCollectionArea.cc:
56 - initialize more variables in the constructor as suggested
57 by valgrind
58
59 * mpointing/MHPointing.cc:
60 - set the maximum such that both axis are scaled correctly
61
62 * msimcamera/MSimBundlePhotons.cc:
63 - added some more output
64
65 * resmc/dwarf-pde-gapd.txt:
66 - used new curve from ETH
67 - extrapolated curve on both ends linearily
68
69 * resmc/dwarf-reflectivity.txt:
70 - extrapolated linearily to 980 nm
71
72 * resmc/magic-pde.txt:
73 - set to 0 at 900nm
74
75 * resmc/magic-reflectivity.txt:
76 - extrpolated to 900nm
77
78 * msimcamera/MSimReadout.cc:
79 - small improvement to sanity check to allow having less channels
80 than pixels
81
82 * mreport/MReport.cc:
83 - added once more a fix for a wrong Arehucas version
84
85 * mbase/MSpline3.[h,cc]:
86 - added functions to return the analytical integral
87 of the spline
88
89 * mjobs/MJSimulation.[h,cc]:
90 - replaced the 2D histogram with the impact on ground with
91 a 1D histogram with the impact perpendicular to Alt/Az
92 - Use a MParSline instead of MPulseShape
93 - Use MParSplines as input for MSimAbsorption
94 - increased the number of bins for the threshold histogram
95 - adapted BinningImpact
96 - added another histogram for the event distribution after cleaning
97 - changed the default number of the NSB to fit the new input
98 definition
99 - added histogram for MNewImagePar
100 - added tab "Info2"
101 - added all MHPhotonEvent to the paremeter list to allow access
102 of the ReadEnv
103
104 * msim/MSimAbsorption.[h,cc]:
105 - moved the spline code to MParSpline
106 - use MParSpline as new input
107
108 * msimcamera/MSimCalibrationSignal.[h,cc], msimcamera/MSimCamera.[h,cc],
109 msimcamera/MSimGeomCam.[h,cc]:
110 - replaces MPulseShape by MParSpline
111
112 * msimcamera/MSimRandomPhotons.[h,cc]:
113 - scale NSB rates like it is done in Eckart's paper
114 - write rates to an output container
115
116 * ceres.rc:
117 - adapted
118
119 * msimcamera/MSimAPD.[h,cc]:
120 - take the acidental rate from a container
121
122 * mbase/Makefile, mbase/BaseLinkDef.h:
123 - added MParSpline
124
125 * mbase/MParSpline.[h,cc]:
126 - added
127
128 * msim/MSimAtmosphere.cc:
129 - fixed a bug which caused the aerosol coefficient to be
130 incorrectly initialized
131
132
133
134 2009/04/01 Thomas Bretz
135
136 * Makefile.conf.linux:
137 - removed accidental '-g'
138
139 * Makefile.conf.linux:
140 - removed -Wconversion (produces too much output on newer
141 compilers)
142
143 * ceres.rc, mjobs/MJSimulation.cc:
144 - added a cut "Cut" after image parameter calculation
145 - updated noise numbers
146
147 * resmc/dwarf-pde-gapd.txt:
148 - upadted with a more reliable curve from theeth meeting page
149 (linear extrapolate below 350nm)
150
151
152
153 2009/03/30 Thomas Bretz
154
155 * manalysis/MMcCalibrationUpdate.cc:
156 - fixed a conditional which prevented the display from
157 correctly process raw data
158
159 * mgeom/MGeomCamSquare.cc:
160 - shifted pixels to be centered around 0
161
162 * msimcamera/MSimCamera.cc:
163 - added an additional sanity check
164
165 * mhbase/MH.cc:
166 - added "temp" to palette
167
168
169
170 2009/03/27 Stefan Ruegamer
171
172 * datacenter/scripts/checkstardone
173 - added missing ;; for the case-switching
174
175
176
177 2009/03/24 Stefan Ruegamer
178
179 * mhflux/MHAlpha.cc
180 - changed in DrawAll the line color of on-off to blue
181
182
183
184 2009/03/23 Thomas Bretz
185
186 * resources/starguider01000534.txt:
187 - added
188
189 * mbase/MStatusDisplay.cc:
190 - if no MStatusArray is found now all object are drawn
191
192 * mfileio/MWriteRootFile.[h,cc]:
193 - trees to be copied can now be made optional
194
195 * mhbase/MH.cc:
196 - included TProfile2D for newer root versions
197
198 * mjobs/MJCalibrateSignal.cc:
199 - made the copy of "OriginalMC" optional. Now it also works
200 for non-ceres (original MMCS) files again which don't
201 have this tree.
202
203
204
205 2009/03/19 Daniel Hoehne-Moench
206
207 * datacenter/scropts/mcsequences:
208 - bugfix: replaced $user by $us
209 - bugfix: fPriority is now inserted into the correct table
210
211
212
213 2009/03/16 Thomas Bretz
214
215 * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
216 - added new starguider calibration since 1000534
217
218 * datacenter/macros/plotdb.C, datacenter/macros/plotrundb.C:
219 - added option to set ds-number in datset
220
221 * mgeom/MGeomCamMagic.cc:
222 - fixed layout of the MII camera
223
224 * mpointing/MPointingDevCalc.cc:
225 - updated informations
226
227
228
229 2009/03/16 Daniel Hoehne-Moench
230
231 * datacenter/scripts/fillcamera
232 - bugfix: the first line was moved by a tabulator
233
234
235
236 2009/03/16 Stefan Ruegamer
237
238 * datacenter/scripts/makecallistolinks
239 - added >/dev/null in line 68 to prevent the mails to dc@astro
240 - removed the -v for the ln
241
242 * datacenter/scripts/sourcefile
243 - added printprocesslog for rm -v in the finish function (mails)
244
245
246
247 2009/03/15 Thomas Bretz
248
249 * mgeom/MGeomCam.[h,cc]:
250 - added member function to get the total sensitive area of the
251 camera
252
253 * mgeom/MGeomCamMagic.cc:
254 - included TMath for newer root versions
255
256
257
258 2009/03/07 Thomas Bretz
259
260 * RELEASE V2.3
261
262
263
264 2009/03/06 Thomas Bretz
265
266 * datacenter/macros/plotrundb.C datacenter/macros/fillstar.C:
267 - added RunDataCheck access
268
269 * mreflector/MRflEventData.cc:
270 - replaced DistanceToPrimitive by IsInside
271
272
273
274 2009/03/05 Thomas Bretz
275
276 * mreport/MReportCamera.cc:
277 - fixed a problem if the HVFIL section is empty
278
279 * merpp.cc:
280 - added --dev-null option to Usage output
281
282 * mjobs/MJMerpp.[h,cc]:
283 - fixed operation in --dev-null mode
284
285
286
287 2009/03/04 Thomas Bretz
288
289 * datacenter/macros/plotdb.C:
290 - updated some binnings
291
292 * datacenter/macros/fillganymed.C:
293 - use the primary also when inserting
294
295 * mgeom/GeomLinkDef.h:
296 - added MGeomCamMagicII
297
298 * mgeom/MGeom.[h,cc]:
299 - added option to set position
300 - removed DistanceToPrimitive, use IsInside instead
301
302 * mgeom/MGeomCam.[h,cc]:
303 - added a virtual function to CreateNN
304 - added a workaround after reading by calling CreateNN
305 because with the last changes the pixel indices get lost
306
307 * mgeom/MGeomCamCT1.[h,cc]:
308 - now derives from MGeomCamDwarf
309 - accordingly increased version number
310
311 * mgeom/MGeomCamDwarf.[h,cc]:
312 - removed Clone -> now in MGeomCam
313
314 * mgeom/MGeomCamMagic.[h,cc]:
315 - added MGeomCamMagicII <preliminary>
316
317 * mgeom/MGeomCamSquare.[h,cc]:
318 - removed creation of next neighbors -> now automatic
319
320 * mgeom/MGeomPix.[h,cc]:
321 - added rotation angle in terms of cos(phi) and sin(phi)
322 - rotate in PaintPrimitive
323 - adapted IsInside accordingly
324
325 * mgeom/MGeomRectangle.[h,cc]:
326 - if only width is given assume a square
327 - make sure that the box is correctly painted for all root versions
328 - fixed distance to farthest point
329
330 * mgui/MHexagon.[h,cc]:
331 - removed obsolete dependence on MGeomPix
332
333 * mhist/MHCamera.cc, mtools/MagicJam.cc:
334 - replaced DistanceToPrimitive by IsInside
335
336 * mjobs/MJSimulation.cc:
337 - replaced accidental _I_ in file names by _Y_
338
339 * mreport/MReportCC.[h,cc]:
340 - added version >=200809030
341 - improved modularity of code
342
343
344
345 2009/03/03 Thomas Bretz
346
347 * ceres.rc:
348 - added some more infomation
349 - updated paths
350
351 * mcorsika/MCorsikaRunHeader.[h,cc]:
352 - added atmospheric layers
353 - added interpretation of new XSCATT/YSCATT in newer corsikas
354
355 * msim/MSimAtmosphere.[h,cc]:
356 - changed path
357 - MAtmosphere doesn't search for any files per default anymore
358 - changed atmopsheric layers to the ones fitted by Corsika
359 - added possibility to change input files to ReadEnv
360
361 * msimcamera/MSimCalibrationSignal.cc:
362 - don't create a camera geometry yourself
363
364 * resmc/atmosphere-aerosols.txt, resmc/atmosphere-ozone.txt,
365 resmc/ct1-pde.txt, resmc/dwarf-apdmap.txt, resmc/dwarf-cones.txt,
366 resmc/dwarf-pde-gapd.txt, resmc/dwarf-reflectivity.txt,
367 resmc/dwarf-reflector.txt, resmc/magic-cones-inner.txt,
368 resmc/magic-pde.txt, resmc/magic-reflectivity.txt,
369 resmc/magic-reflector-chessboard.txt, resmc/magic-reflector.txt,
370 resmc/magic-trigger-1NN.txt, resmc/magic-trigger-2NN.txt,
371 resmc/magic-trigger-3NN.txt, resmc/magic-trigger-4NN.txt:
372 - added
373
374 * mhist/Makefile:
375 - removed accidental MHQuality
376
377 * mhist/MHCamera.cc:
378 - fixed a warning when calling DistancetoPrimitive
379
380 * mgeom/MGeomCamSquare.cc:
381 - accidentaly used Double_t instead of Short_t when calling
382 SetNeighbors
383 - changed number of pixels from UInt_t to Short_t. It doesn't make
384 sense to support more pixels than we can store as index for
385 neighbors
386
387 * Makefile:
388 - added mreflector to resolve unresolved symbols
389
390
391
392 2009/03/02 Daniela Dorner
393
394 * datacenter/db/plotdb.php:
395 - adapted width of table
396
397
398
399 2009/03/02 Thomas Bretz
400
401 * mgeom/MGeomCam.[h,cc], msimreflector/MMirror.h,
402 msimreflector/MMirrorDisk.[h,cc], msimreflector/MMirrorHex.[h,cc],
403 msimreflector/MMirrorSquare.[h,cc], msimreflector/MReflector.[h,cc]:
404 - added GetA member function
405
406 * manalysis/MCameraData.cc, mbadpixels/MBadPixelsCalc.cc,
407 mbadpixels/MBadPixelsCam.cc, mbadpixels/MBadPixelsTreat.cc,
408 mcalib/MCalibrationCam.cc, mcalib/MCalibrationChargeCalc.cc,
409 mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationPulseTimeCam.cc,
410 mcalib/MCalibrationRelTimeCalc.cc, mcalib/MCalibrationRelTimeCam.cc,
411 mcalib/MCalibrationTestCalc.cc, mcalib/MCalibrationTestCam.cc,
412 mcorsika/MCorsikaEvtHeader.cc, mfilter/MFSoftwareTrigger.cc,
413 mgeom/MGeomCam.cc, mhcalib/MHCalibrationCam.cc,
414 mhcalib/MHCalibrationChargeCam.cc, msignal/MSignalCam.cc,
415 mhcalib/MHCalibrationPulseTimeCam.cc, mpointing/MPointingPos.h,
416 mhcalib/MHCalibrationRelTimeCam.cc, mhft/MHexagonalFTCalc.cc,
417 mhist/MHCamera.cc, mimage/MHillas.cc, mimage/MNewImagePar.cc,
418 mjobs/MJCut.cc, mjobs/MJSimulation.cc, mpedestal/MPedPhotCam.cc,
419 mpedestal/MExtractPedestal.cc, mpedestal/MPedestalCam.cc,
420 msimcamera/MSimGeomCam.cc, msimcamera/MSimRandomPhotons.cc:
421 - replaced MGeomPix by MGeom
422
423 * mjobs/MJStar.cc:
424 - added BinningDist
425 - converted Muon cuts from mm to deg
426
427 * mhflux/MHCollectionArea.cc:
428 - fixed a problem that a plot disappeared in old files
429
430 * mmuon/MMuonSearchPar.cc:
431 - switched off the check in Paint (this works only for MAGIC :( )
432
433 * datacenter/macros/fillganymed.C:
434 - simplified by using MSQLMagic instead of MSQLServer
435
436
437
438 2009/03/01 Thomas Bretz
439
440 * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
441 - added pointing model 328198
442
443 * mbase/MSpline3.h:
444 - added a cast to make it compile with root 5.18
445
446 * melectronics/MPulseShape.cc:
447 - included TH1 to make it compile with root 5.18
448
449 * mhflux/MAlphaFitter.[h,cc]:
450 - convert MString::Format to Data()
451 - added type SignificanceSqrtExcess
452
453 * mhflux/MHFalseSource.cc, mjobs/MJSpectrum.cc:
454 - convert MString::Format to Data()
455
456 * mhist/MHCamera.cc:
457 - changed some const TString to const char to resolve
458 ambiguity in root 5.18 in TF1 constructor
459
460 * msim/MHPhotonEvent.cc:
461 - use TMath::Abs instead of abs
462
463 * msim/MSimPointingPos.[h,cc]:
464 - moved getter and setter to source file to avoid including of
465 TMath
466
467 * mgeom/MGeom.[h,cc]:
468 - added
469
470 * mgeom/MGeomRectangle.[h,cc]:
471 - added
472
473 * mgeom/MGeomCamSquare.[h,cc]:
474 - added
475
476 * mgeom/Makefile, mgeom/GeomLinkDef.h:
477 - added MGeom
478 - added MGeomRectangle
479 - added MGeomCamSquare
480
481 * Makefile.rules:
482 - removed dependance on ROOTSYS from rmkdepend. It should be in
483 the path anyway as rootcint
484
485 * ceres.rc:
486 - added an example of setting the APD type
487
488 * mbadpixels/MBadPixelsCam.[h,cc], mbadpixels/MBadPixelsTreat.cc,
489 mcalib/MCalibrationChargeCalc.cc, mcalib/MCalibrationTestCalc.cc,
490 mfilter/MFSoftwareTrigger.cc:
491 - replaced references to MGeomPix by references to MGeom
492
493 * mbase/MStatusDisplay.cc:
494 - evaluate the return code of fwrite as suggested by newer
495 gcc versions
496 - set a paranthesis as suggested by a warning
497
498 * mgeom/MGeomCam.[h,cc]:
499 - adapted to the changes in MGeomPix/MGeom
500 - added SetAt function for external setup
501 - added Copy constructor
502
503 * mgeom/MGeomCamCT1.cc, mgeom/MGeomCamDwarf.cc,
504 mgeom/MGeomCamMagic.cc, mhft/MHexagonFreqSpace.cc,
505 mimage/MHillas.cc, mimage/MHillasExt.cc,
506 mimage/MImgCleanStd.[h,cc], mimage/MNewImagePar.cc,
507 mimage/MNewImagePar2.cc, mmuon/MHSingleMuon.cc,
508 msignal/MSignalCam.cc, mtools/MagicJam.cc,
509
510 - adapted to the changes in MGeomPix/MGeom
511 - use SetAt for setup
512
513 * mgeom/MGeomPix.cc:
514 - moved most of the code to new base class MGeom
515 - now derives from MGeom
516 - increased version number accordingly
517
518 * mhbase/MBinning.cc:
519 - replaced a Int_t by UInt_t as suggested by a warning
520
521 * mhbase/MH.cc:
522 - added a const_cast for GetObjectInfo (should be const,
523 but isn't)
524
525 * mhbase/MHMatrix.cc, mhflux/MHAlpha.cc, mhflux/MHThetaSq.cc,
526 mhflux/MHThetaSqN.cc, mhist/MHCamEventRot.cc, hvstime/MHVsTime.cc,
527 mjobs/MJStar.cc, mraw/MRawEvtHeader.cc:
528 - added paranthesis as suggested by a warning
529
530 * mhft/MGeomCamMagicXT.[h,cc]:
531 - replaced by deriving from MGeomCamDwarf
532
533 * mhist/MHCamera.cc:
534 - adapted to the changes in MGeomPix/MGeom
535 - use SetAt for setup
536 - use new PaintPrimitive to skip the usage of MHexagon
537
538 * mmc/MMcTrigHeader.hxx:
539 - fixed wrong condition in SetTrigger
540
541 * msimcamera/MSimAPD.[h,cc]:
542 - added a possibility to switch between the 50mu and 100mu
543 Diodes
544
545 * mtools/MagicCivilization.[h,cc], mtools/MagicDomino.[h,cc],
546 mtools/MagicReversi.[h,cc], mtools/MagicShow.[h,cc],
547 mtools/MagicSnake.[h,cc], mtools/MineSweeper.[h,cc],
548 - adapted to the changes in MGeomPix/MGeom, therefore restructered
549 the code to get rid of MHexagon
550
551 * mmovie/MMovieWrite.cc:
552 - allow to switch off timing via preprocessor directive
553 - replaced MGeomPix by MGeom
554 - slightly changed palette
555 - evaluate return of fwrite
556
557 * mbase/MQuaternion.h, msim/MPhotonData.h:
558 - added a workaround for sqrt in root 5.18/00
559
560
561
562 2009/02/26 Daniel Hoehne-Moench
563
564 * datacenter/macros/filldotrun.C:
565 - implemented new SuperArehucas version
566
567
568
569 2009/02/23 Thomas Bretz
570
571 * mcorsika/MCorsikaRunHeader.cc:
572 - switched off the impact max workaround - it doesn't work
573 - initialize fImpact Max
574 - print also number of used ATMEXT
575
576 * mhbase/MH.cc:
577 - improved setting of binning from the parameter list in the
578 n-D case
579
580 * mhbase/MH3.cc:
581 - imporved output
582
583 * mhflux/MHCollectionArea.cc:
584 - also collect the maximum impact while running for a nicer
585 behaviour of the plots
586
587 * mhflux/MHThreshold.cc:
588 - allow setting of a dedicated Threshold binning
589
590 * mimage/MHHillasExt.cc:
591 - converted slope binning to deg
592
593 * mjobs/MJSimulation.cc:
594 - write MMcCorsikaRunHeader
595 - changed binnings
596 - added new binning
597 - now display the signal unscaled
598 - show threshold and collection area only for data runs
599
600 * msim/MSimMMCS.cc:
601 - make setting of directions depending on view-cone option
602
603 * msim/MSimPointingPos.[h,cc]:
604 - added class description
605 - removed obsolete fPointingCorsika
606 - improved output
607 - added option for homogenous distribution
608
609 * mmuon/MMuonCalibParCalc.cc:
610 - converted cuts from mm to deg so they will work also for other
611 geometries
612
613
614
615 2009/02/20 Thomas Bretz
616
617 * mmuon/MHMuonPar.[h,cc]:
618 - updated class version number after fMm2Deg got removed
619
620 * mpointing/MHSrcPosCam.cc:
621 - fixed the fill style of the ellipse to produce correct ps-files
622
623
624
625 2009/02/19 Daniela Dorner
626
627 * datacenter/scripts/buildsequenceentries,
628 datacenter/scripts/checkfilesforsequenceavail,
629 datacenter/scripts/checkstardone, datacenter/scripts/correcttime,
630 datacenter/scripts/dbchk, datacenter/scripts/dodatacheck,
631 datacenter/scripts/doexclusions, datacenter/scripts/fillcallisto,
632 datacenter/scripts/fillcamera, datacenter/scripts/fillganymed,
633 datacenter/scripts/fillstar, datacenter/scripts/insertdatasets,
634 datacenter/scripts/makecallistolinks,
635 datacenter/scripts/mcsequences, datacenter/scripts/movingrawfiles,
636 datacenter/scripts/movingrawfiles_OK, datacenter/scripts/runcamera,
637 datacenter/scripts/runcorsika, datacenter/scripts/runreflector,
638 datacenter/scripts/sourcefile,
639 datacenter/scripts/writedatasetfiles,
640 datacenter/scripts/writesequencefiles:
641 - removed scriptlog
642
643 * datacenter/scripts/jobmanager:
644 - fixed typo
645
646
647
648 2009/02/19 Thomas Bretz
649
650 * mcorsika/MCorsikaRunHeader.[h,cc]:
651 - reformatted output
652 - added "Options" to output
653 - made Has const
654 - added a workaround to get the maximum simulated impact
655 although it is not officially stored in the file
656
657 * msim/MHPhotonEvent.cc:
658 - improved automatic binning
659
660 * msim/MPhotonData.[h,cc]:
661 - added GetCosW2
662 - added GetSinW2
663 - added GetSinW
664
665 * msim/MSimAbsorption.cc:
666 - don't check wavelength range when theta should be used
667
668 * msimcamera/MSimAPD.cc:
669 - check for uninitialized indices
670
671 * msim/MPhotonEvent.[h,cc]:
672 - moved the code for MyClonesArray to the source file
673 - improved a lot the reading speed by reading larger blocks
674 of data from the file at once
675 - improved memory handling. This ensures that even the largest
676 events don't fill the memory forever and the allocated memory
677 is free'd again after some time
678
679 * msimreflector/MSimReflector.cc:
680 - Use the new Resize function of MPhotonEvent to make sure
681 that the memory is not allocated forever.
682
683 * mimage/MHHillas.cc, mimage/MMHillas.Ext.cc, mimage/MHHillasSrc.cc:
684 - converted default binning from mm to deg
685
686 * mraw/MRawRunHeader.cc:
687 - print less when values doen't have any meaning
688
689 * msim/MSimAtmosphere.[h,cc]:
690 - added
691
692 * msim/SimLinkDef.h, msim/Makefile:
693 - added MSimAtmosphere
694
695 * mjobs/MJSimulation.cc:
696 - added simulation of atmosphere
697 - clean isolated pixels away before calculating image parameters
698 - don't clean calibration runs
699 - correct displayed az by magnetic field
700 - added auto range for the 2D histograms
701 - set automatic binning for dist
702 - added tab with histogram for trigger area and threshold
703
704 * readcorsika.cc:
705 - implemented -ff option
706
707 * mcorsika/MCorsikaRunHeader.cc:
708 - improved Print output
709
710 * mimage/MImgCleanStd.cc:
711 - fixed the checks for the cleaning parameters there
712 where some wrong conditions
713
714 * msim/MSimMMCS.cc:
715 - fixed typo in a comment
716
717 * ceres.rc:
718 - added units for psf
719 - some small updates
720
721 * msimreflector/MSimReflector.cc:
722 - convert units of psf from mm to cm
723 - Use MPointingPos instead of PointingCorsika, ARRANG already
724 rotates all vectors accrodingly
725
726 * msim/MSimPointingPos.cc:
727 - don't write PoinitingCorsika anymore. ARRANg already includes
728 the rotation
729
730 * mgeom/MGeomCamMagic.[h,cc]:
731 - added a constructor which allows to set the focal distance
732
733 * msimcamera/MSimAPD.cc, msimcamera/MSimGeomCam.cc,
734 msimcamera/MSimRandomPhotons.cc, msimreflector/MSimReflector.cc:
735 - don't create an object if MGeomCam not found, try "MGeomCam"
736 as default instead
737
738 * mhflux/MHCollectionArea.[h,cc]:
739 - added MMcRunHeader to data members to be able to check
740 the maximum impact in Finalize for the case the maximum
741 impect is collected "on-line" from the events
742 - if the event distribution comes just from the spectrum fill
743 the distribution event by event to get correct errors
744 - romved some old obsolete code
745
746 * msim/MSimMMCS.[h,cc]:
747 - added MMcRunHeader to data members to allow to collect the
748 maximum impact from the events
749
750
751
752 2009/02/18 Thomas Bretz
753
754 * datacenter/scripts/runcorsika:
755 - added a comment
756
757 * mbase/MParList.cc:
758 - when adding a TCollectionn only add MParContainers
759
760 * mcorsika/MCorsikaRunHeader.[h,cc]:
761 - added reading of Atmospheric coefficients
762 - added reading of Cherenkov Flag
763 - added corsika's Earth Radius
764
765 * melectronics/MDigitalSignal.[h,cc]:
766 - added and initialized an index to allow to "connect"
767 the digital signal to a channel
768
769 * mjtrain/MJTrainSeparation.cc:
770 - replaced kGreen by kBlue
771
772 * mmain/MEventDisplay.cc:
773 - added a type==3 which is for ceres-reflector files
774
775 * mmain/Makefile:
776 - added -I../mcorsika
777 - added -I../msim
778 - added -I../msimcamera
779
780 * msim/MHPhotonEvent.[h,cc]:
781 - set the binning more automatically from the run-headers
782 where possible
783 - added RadEnv
784 - added Clear function for external access
785
786 * msim/MSimAbsorption.cc:
787 - addec const-qualifier for photon
788
789 * msimcamera/MSimGeomCam.cc:
790 - allow usage also without pulse and pulse position (for display)
791
792 * msimcamera/MSimSignalCam.cc:
793 - allow usage also without TriggerPos
794 - added a check whether MSignalCam was correctly initialized
795
796
797
798 2009/02/16 Thomas Bretz
799
800 * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc,
801 mimage/MHImagePar.cc:
802 - replaced green by blue for better readability on projectors
803
804 * mbase/MEnv.[h,cc]:
805 - added the option of a default name to allow i/o more similar
806 to MParContainer
807 - improved Print()
808
809 * ceres.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
810 - make use of the new default name of MEnv
811
812 * mjobs/MJSpectrum.cc:
813 - read and write ganymed.rc
814
815 * mbase/MParList.cc:
816 - if adding a TObjArray add only MParContainers (for sanity)
817
818 * mjobs/MJob.cc:
819 - when reading read also TObjects
820
821 * mjobs/MJSpectrum.cc:
822 - now read the ganymed.rc and write it to the output
823
824 * mhflux/MHEffectiveOnTime.h:
825 - increased class version by 1
826
827 * mhflux/MHAlpha.cc:
828 - removed erronornously comittet SetSumw2
829 - don't output the numbe rof excess events vs time
830
831
832
833 2009/02/15 Thomas Bretz
834
835 * ceres.rc:
836 - added the MAGIC I high gain pulse as example
837
838 * sponde.cc:
839 - redirect root error handler
840 - added new option to force on-time fit
841
842 * datacenter/scripts/runcorsika:
843 - added a comment
844 - remove empty dat file after corsika finished
845
846 * mbase/MLog.cc:
847 - added several more log-levels to handling root's error handler
848
849 * mbase/MPrint.cc:
850 - flush buffer before printing
851 - set output level to all
852
853 * melectronics/MPulseShape.h:
854 - let clone also clone the spline
855
856 * mfileio/MWriteRootFile.cc:
857 - don't output title if empty
858
859 * mhflux/MHEffectiveOnTime.[h,cc]:
860 - added new data mebers to store the result of the overall-fit
861 which is now done in Finalize
862 - output the results of the effective on-time fit as inf2
863 - increased clas version accordingly
864
865 * mjobs/MJSimulation.[h,cc]:
866 - simplified setting up the file structure
867
868 * mjobs/MJSpectrum.[h,cc]:
869 - added the possibility to force a new on-time fit.
870 - a MHEffectiveOnTime histogram is now always displayed
871 for manual cross checks
872
873 * mjobs/MJStar.cc:
874 - added MSrcPosCam for Monte Carlos to output
875
876 * mpointing/MSrcPosCalc.cc:
877 - ignore the WobbleMode from the MMcCorsikaRunHeader
878 if it is a ceres file
879
880 * msim/MPhotonEvent.[h,cc]:
881 - added function GetTimeFirst
882 - added function GetTimeLast
883 - added function GetTimeMedianDev
884 - added fLength to MPhotonStatistics
885
886 * msimcamera/MSimGeomCam.cc:
887 - make use of the new functions
888 - set length to statistics container
889
890 * mpointing/MHSrcPosCam.[h,cc], mpointing/MSrcPosRndm.[h,cc],
891 mfilter/MFMagicCuts.[h,cc], mmuon/MHMuonPar.[h,cc],
892 mhflux/MHThetaSqN.[h,cc]:
893 - support changing geometries (conversion factors) reading
894 a new geometry from a run header
895
896 * mimage/MHVsSize.[h,cc], mimage/MHNewImagePar.[h,cc],
897 mimage/MHHillasSrc.[h,cc], mimage/MHHillasExt.[h,cc],
898 mimage/MHHillas.[h,cc], mimage/MNewImagePar2.[h,cc]:
899 - removed option to set conversion factor manually
900 - support changing geometries (conversion factors) reading
901 a new geometry from a run header
902 - increased class version by one
903
904 * mhflux/MMcSpectrumWeight.cc:
905 - replaced Form by MString::Format
906
907 - made sure that nobody is mixing different energy-range monte
908 carlos and normalizes by integral (to be implemented)
909
910 * manalysis/MMcCalibrationUpdate.cc:
911 - switched off file Ceres files (this might only be temporary
912 but it makes the display work quite well even without
913 calibrated units.
914
915 * mjobs/MJCalibrateSignal.cc:
916 - updated the rule to allow for file names without the leading date
917
918 * mjobs/MJSpectrum.[h,cc]:
919 - set the kMustCleanup bit for sanity
920 - replaced a lot of Form by MString::Format
921 - moved the getting of the right Alpha-histogram to GetHAlpha
922 - the tlist2 doesn't neet to replace anything because all previous
923 tasklists added to the list have been removed again
924 - "DataType" already in parlist? Don't add a second one
925 - replaced some gLog by fLog
926 - make sure that the "Done." message is printed even in case
927 no output is written at the end
928
929 * ceres.rc:
930 - added some more info
931
932 * datacenter/scripts/runcorsika:
933 - added magnetic field Azimuth direction (ARRANG), currently
934 at ~ -7deg at La Palma
935
936 * mbase/MLog.cc:
937 - finallyadded a really stupid hack/workaround to suppress these
938 annoying errors in case of a log-scale set too early
939
940 * mbase/MTask.[h,cc]:
941 - Replaced OverwritesProcess by Overwrites
942
943 * mcorsika/MCorsikaEvtHeader.cc:
944 - fixed particle momentum coordinate system
945
946 * mcorsika/MCorsikaRunHeader.[h,cc]:
947 - added magnetic field values
948 - improved output
949
950 * mjobs/MJSimulation.cc:
951 - updated height scale
952 - use MPhotonStatistics.fLength
953 - plot median dev of photon arrival times
954
955 * mmc/MMcRunHeader.hxx:
956 - added a getter IsCeres
957 - added a setter for the Corsika Version
958
959 * mpedestal/MMcPedestalCopy.cc:
960 - use the new IsCeres
961
962 * msim/MSimMMCS.[h,cc]:
963 - use the telescope pointing in telescope coordinates for MMcEvt
964 - correct the shower direction by the magnetic field azimuth
965 - set corsika program version
966
967 * msim/MSimPointingPos.[h,cc]:
968 - splitted the output into coordinated in the corsika frame
969 (module the magnetic field) and the poiting direction in
970 telescope coordinates
971 - added possibility to "observe" in off-target mode
972
973 * msimreflector/MSimReflector.cc:
974 - use new pointing direction in the corsika frame
975
976
977
978
979 2009/02/13 Thomas Bretz
980
981 * mcorsika/MCorsikaEvtHeader.h:
982 - added some comments on the coordinate system
983
984 * ceres.rc:
985 - added some comments
986 - setup a psf for the dwarf mirror
987
988 * mcorsika/MCorsikaRunHeader.h:
989 - added some comments
990
991 * mjobs/MJSimulation.cc:
992 - added some histogram titles
993 - fixed the x, y coordinates of the impact histogram
994 - write "ElectronicNoise"
995
996 * mjobs/MJStar.cc:
997 - don't force writing of containers which are not filles by ceres
998 - updated rule to support files without date
999
1000 * mpedestal/MPedestalPix.[h,cc]:
1001 - added Print() function
1002
1003 * mraw/MRawFileRead.cc:
1004 - added a comment
1005
1006 * msim/MPhotonData.h:
1007 - added comments about coordinate system
1008
1009 * msimcamera/MSimGeomCam.cc:
1010 - when looking for the pixels convert from ceres-coordinates
1011 to GeomCam camera-coordinates
1012
1013 * msimreflector/MMirror.h:
1014 - added Setter for SigmaPSF
1015
1016 * msimreflector/MMirrorDisk.cc, msimreflector/MMirrorHex.cc,
1017 msimreflector/MMirrorSquare.cc:
1018 - now start counting in ReadM with 0
1019
1020 * msimreflector/MReflector.[h,cc]:
1021 - added some documentation
1022 - added function to set psf of all mirrors
1023 - added psf optional to input file
1024 - remove already evaluated tokens from TObjArray
1025 - added reading of a default psf from the input file
1026
1027 * mjobs/MSequence.cc:
1028 - fixed a bug in GetArrays which could cause seg-faults
1029 - added a sanity check
1030
1031
1032
1033 2009/02/12 Thomas Bretz
1034
1035 * datacenter/macros/fillsources.C:
1036 - updated
1037
1038 * mfileio/MWriteRootFile.[h,cc]:
1039 - added some comments
1040 - renamed GetNewFileName to SubstituteName
1041 - made SubstituteName static
1042
1043 * mhist/MHCamera.cc:
1044 - fixed the number in the legend (was wrong since last update)
1045
1046 * mjobs/MDataSet.cc:
1047 - replaced From by MString::Format
1048
1049 * mjobs/MJSimulation.cc:
1050 - a lot of things were renamed
1051 - the refelctor can now be set from the setup file
1052 - changed the binning for the event width
1053 - removed plot "CamShadow"
1054 - changed rules for file names
1055
1056 * ceres.rc:
1057 - updated according to the changes in MJSimulation
1058
1059 * mjobs/MSequence.cc:
1060 - replaced use of Form by MString::Format
1061 - allow non-setting of fNight
1062 - don't print period if -1
1063
1064 * mmain/MEventDisplay.cc:
1065 - decode trigger pattern for display
1066
1067 * mmain/Makefile:
1068 - included mtrigger
1069
1070 * msim/MHPhotonEvent.cc:
1071 - search Reflector instead of MReflector
1072
1073 * msim/MSimAbsorption.cc:
1074 - added some info output
1075
1076 * msimcamera/MSimAPD.[h,cc]:
1077 - added an option to set the geom cam name. Can be used to skip
1078 this task
1079
1080 * msimcamera/MSimCamera.[h,cc]:
1081 - allow to set BaselineGain from resource file
1082
1083 * msimreflector/MSimReflector.cc:
1084 - removed CamShadow container
1085 - search Reflector instead of MReflector
1086
1087 * Makefile:
1088 - removed mreflector
1089
1090 * mcalib/MCalibrationPatternDecode.cc:
1091 - in case of pattern==0 and MCs set the color to CT1. This is
1092 a workaround because the bits don't allow to set is explicitly
1093 - removed the check for the kCT1Pulser bit. It can never be true
1094 - consequently removed the kCT1Pulser bit
1095
1096 * mpedestal/MMcPedestalCopy.[h,cc]:
1097 - fixed for MUX MCs (the pedestal has to be scaled)
1098 - added option to process ceres data
1099
1100
1101
1102 2009/02/11 Thomas Bretz
1103
1104 * mcalib/MCalibColorSet.[h,cc]:
1105 - removed some obsolete break statements
1106 - removed obsolete gkMCRunLimit
1107 - fixed setting of signal strength for extremely old
1108 runs (I think we don't have them anyway)
1109
1110 * mcalib/MCalibrateData.cc:
1111 - improved output
1112
1113 * mcalib/MCalibrationChargeCalc.cc:
1114 - stop if no valid pulser colors have been found
1115
1116 * mcorsika/MCorsikaRunHeader.h:
1117 - some cosmetics
1118 - added some getter
1119
1120 * mhist/MHEvent.[h,cc]:
1121 - some improvements to output
1122 - implemented display for trigger pattern
1123
1124 * mtrigger/MTriggerPattern.[h,cc]:
1125 - added Copy-function
1126
1127 * mhist/Makefile:
1128 - added -I../mtrigger
1129
1130 * mmc/MMcEvtBasic.[h,cc]:
1131 - moved the getter returning a TString to the source file
1132 - replaced Form by MString::Format
1133
1134 * mraw/MRawRunHeader.cc:
1135 - initialize fSourceEpochChar[1]
1136 - initialize fNumEventsRead
1137 - suppress more output which has not been initialized
1138 - removed run-type from SetRunInfo
1139 - added new function SetRunType
1140 - use strncpy instead of memcpy
1141 - replaced const char[] arguments by TString
1142
1143 * msimreflector/MReflector.[h,cc]:
1144 - added Print
1145 - added a circle around the mirror showing fMaxR
1146
1147 * mastro/MAstro.cc:
1148 - updated some typos in comments
1149
1150 * mbase/MEnv.cc:
1151 - replaced Form by MString::Format
1152
1153 * mbase/MTask.cc:
1154 - made the total number of executions really count the total
1155 number
1156
1157 * mcalib/MCalibrationPatternDecode.cc:
1158 - some cosmetics
1159 - corrected the use of a wrong FindCreateObj
1160
1161 * mcorsika/MCorsikaRead.cc:
1162 - added a comment
1163
1164 * mfileio/MWriteRootFile.cc:
1165 - improved output
1166 - improved the copy of a tree (now done without unpacking)
1167 - made sure that copied trees are shown in the summary
1168 - made sure that the copied trees are nevertheless deleted
1169
1170 * mfilter/MFDeltaT.cc:
1171 - adapted to change in GetNumExecutions
1172
1173 * mhbase/MFillH.cc:
1174 - set the number of executions (as it is in MTask) before the
1175 execution
1176
1177 * mhbase/MH.cc:
1178 - improved the statistics output
1179
1180 * mhist/MHCamera.[h,cc]:
1181 - don't create an own pad anymore
1182 - removed SetRange
1183 - SetRange now done via MH::SetPadRange
1184 - some sanity checks if fGeomCam is set
1185 - some adaptions to the new layout scheme without
1186 an own pad
1187 - Changed DrawProjection to a more commonly usable scheme
1188 - Removed all dependencies from MGeomCamMagic
1189 - start the gaus fit with the maximum not the integral
1190
1191 * mjobs/MJCalibrateSignal.cc:
1192 - If the input files contain an OriginalMC tree
1193 copy it
1194 - consequently we make the MMcEvtBasic from the
1195 parameter-list optional
1196 - fixed the rule (MC files with .root as extension could not
1197 be processed)
1198
1199 * mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.[h,cc]:
1200 - Use MHCamera::CamDraw more extensively
1201 - replace use of Form by MString::Format
1202
1203 * mjobs/MJSimulation.cc:
1204 - added an option to switch the cmaera electronics off
1205 - write some more containers to output file (for easy access)
1206 - set the MC bit in the header
1207 - now use MSimMMCS to "fake" the correct file structure
1208 - added three new writers to write the MMcEvtBasic information
1209 - added a display of the most important things
1210
1211 * mmain/MEventDisplay.cc:
1212 - don't change into the not more existing pad of a MHCamera
1213
1214 * msimcamera/MSimCalibrationSignal.cc:
1215 - adapted GetNumExecution
1216 - SetReadyToSave for the run header
1217 - jitter the number of emitted photons
1218 - corrected the emitted trigger positon
1219 - (re)set calibration pattern
1220
1221 * mbase/MLut.[h,cc]:
1222 - added overload of Delete() function
1223 - added IsDefault
1224 - added SetDefault
1225
1226 * mfileio/MWriteRootFile.cc:
1227 - fixed output in OpenFile
1228
1229 * mjobs/MSequence.cc:
1230 - allow the "Night" resource to be empty
1231
1232 * msimcamera/MSimBundlePhotons.cc:
1233 - some small improvements in case of empty maps
1234
1235 * msimcamera/MSimReadout.[h,cc]:
1236 - reset gain. Use the new fConversionFactor instead
1237 - removed some setting of fRunHeader
1238
1239 * msimcamera/MSimTrigger.[h,cc]:
1240 - on useer request now offset and gain can be used to
1241 convert the signal back into units of phe
1242 - added possibility to use empty lookup tables
1243 - added debug output
1244
1245 * msimcamera/MSimCamera.[h,cc]:
1246 - outsourced the pedestal and gain numbers into ReInit
1247 - use an MPedestalCam for Electronic Noise and Gain
1248 - allow to switch ob whether the gain is applied to the
1249 electronic noise or not
1250 - SetPhotElfromShower
1251
1252 * msim/Makefile. msim/SimLinkDef.h:
1253 - added MSimMMCS
1254
1255 * msim/MSimMMCS.[h,cc]:
1256 - added
1257
1258 * msimcamera/Makefile:
1259 - added -I../mpedestal
1260
1261 * ceres.rc:
1262 - added
1263
1264 * msimreflector/MMirrorSquare.cc, msimreflector/MMirrorHex.cc,
1265 msimreflector/MMirrorDisk.cc:
1266 - changed the grey colors
1267
1268 * msimreflector/MMirrorHex.cc:
1269 - fixed bugs in CanHit and HasHit
1270
1271
1272
1273 2009/02/10 Thomas Bretz
1274
1275 * manalysis/MMcTriggerLvl2Calc.cc:
1276 - removed obsolete include of MmcRunHeader
1277
1278 * mbase/MSpline3.[h,cc]:
1279 - improved the available constructors
1280 - added some comments for future use
1281 - added default constructor
1282 - added GetHistogram()
1283
1284 * mcorsika/MCorsikaRunHeader.[h,cc]:
1285 - added fImpactMax
1286 - added some Getters
1287
1288 * melectronics/MPulseShape.[h,cc]:
1289 - set class version to 1 to make it storable
1290 - set a title for the splines
1291 - implemented Paint function
1292
1293 * mhbase/MH.[h,cc]:
1294 - added SetPadRange
1295
1296 * mhist/MHCamEvent.[h,cc]:
1297 - Init the geometry in ReInit thus it can work with a geometry stored in a file
1298 - Make sure that histogranms already drawn properly to a pad are found in Paint
1299 - added RecursiveRemove for sanity
1300
1301 * mmc/MMcCorsikaRunHeader.h:
1302 - added SetSpectrum
1303
1304 * mmc/MMcEvt.hxx:
1305 - added SetEvtNumber
1306 - added SetPhotElfromShower
1307
1308 * mmc/MMcEvtBasic.[h,cc]:
1309 - added operator=
1310
1311 * mmc/MMcRunHeader.[hxx, cxx]:
1312 - set default for the versions to UShort_t(-1)
1313 - added some comments
1314 - added SetNumSimulatedShowers
1315 - added SetImpactMax
1316
1317 * mraw/MRawRunHeader.cc:
1318 - suppress some information in header if not valid
1319
1320 * msignal/MSignalCalc.cc:
1321 - if (!fPedestal) we should return kTRUE not kFALSE
1322
1323 * msimreflector/MMirror.[h,cc], msimreflector/MMirrorDisk.[h,cc],
1324 msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorSquare.[h,cc],
1325 msimreflector/MReflector.[h,cc],
1326 - added Print
1327 - some cosmetics in header
1328 - set class version to 1 to make it storable
1329
1330 * mtools/MagicJam.cc:
1331 - updated
1332
1333
1334
1335 2009/02/10 Daniela Dorner
1336
1337 * datacenter/db/tabs.php:
1338 - if csv-file doesn't exist, only logs are displayed now
1339
1340
1341
1342 2009/02/08 Thomas Bretz
1343
1344 * Makefile.conf.linux:
1345 - added -Winit-self
1346
1347 * msimcamera/MSimCalibrationSignal.[h,cc]:
1348 - account for the pulse shape/width
1349 - make number of photons settable
1350 - make time jitter settable
1351 - renamned fNumEntries to fNumEvents
1352 - don't set daq event number (should be set by the "daq")
1353 - set trigger pattern
1354 - print number of events in PreProcess
1355
1356 * msimreflector/MSimReflector.[h,cc]:
1357 - made the detector margin settable
1358
1359 * datacenter/macros/insertcacofile.C, datacenter/macros/insertsequence.C:
1360 - print an error and exit
1361
1362 * macros/optim/optimdisp.C:
1363 - set the default values as default
1364 - added a short summary what a good strategy for optimization is
1365
1366 * mastro/MAstro.cc:
1367 - replaced Form by MString::Form
1368
1369 * mcorsika/MCorsikaEvtHeader.[h,cc], mcorsika/MCorsikaRunHeader.[h,cc]:
1370 - moved fParticleID from event header to run header
1371 - increased Class Version accordingly
1372 - added an error if more than one observation levels are read
1373
1374 * mhcalib/MHGausEvents.cc:
1375 - replaced Form by MString::Form
1376 - handle the creating of the TF1 fExpFit a bit more "root-safe"
1377
1378 * mhist/MHCamEvent.[h,cc]:
1379 - added a new option to collect the maximum or minimum contents
1380
1381 * mhist/MHCamera.[h,cc]:
1382 - added new functions SetMax/MinCamContent
1383
1384 * mraw/MRawEvtHeader.cc:
1385 - initialize the data members in constructor
1386
1387 * mraw/MRawEvtHeader.h:
1388 - removed bits for trigger type they were never used
1389
1390 * mraw/MRawRunHeader.cc:
1391 - tiny cosmetics
1392
1393 * msim/MHPhotonEvent.[h,cc]:
1394 - added a histogram to display the height
1395 - don't fill kNightSky photons
1396
1397 * msim/MPhotonData.h:
1398 - added getter for fProductionHeight
1399
1400 * msim/MPhotonEvent.h:
1401 - commented IsValid (was not used anyhow)
1402
1403 * msimcamera/MSimGeomCam.[h,cc]:
1404 - added one sample to the window to allow for time jitter of one sample
1405 - make the code for the window indentical to MSimCalibrationSignal
1406
1407 * msimcamera/MSimReadout.[h,cc]:
1408 - Set the daq event number (readout number)
1409
1410 * msimcamera/MSimTrigger.[h,cc]:
1411 - added comments
1412 - made the signal length settable
1413 - made the coincidence time settable
1414 - removed setting of the daq event number (should be done by the "daq")
1415 - changed the trigger output from all to inf/inf2
1416
1417 * msimcamera/Makefile:
1418 - added -I../mtrigger
1419
1420 * mjobs/MJSimulation.[h,cc]:
1421 - added new mode to force the use of the trigger "electronics"
1422 - moved setup of the fadc to the resource file
1423 - added a new histogram to show the maximum signal in all pixels
1424 - automatically setup the range of the TrigPos histogram
1425 - don't show all histograms in all run conditions
1426
1427 * mraw/MRawRunHeader.[h,cc]:
1428 - added ReadEnv for a setup from a resource file in ceres
1429
1430 * msimcamera/MSimAPD.cc:
1431 - added a sanity check if ReInit has not been called
1432
1433
1434
1435 2009/02/07 Thomas Bretz
1436
1437 * sponde.rc:
1438 - fixed a typo
1439
1440 * datacenter/scripts/runcorsika:
1441 - added a comment
1442
1443 * mbase/MContinue.h:
1444 - changed a comment
1445
1446 * mbase/MEnv.h, mbase/MMath.cc:
1447 - Do not assign a temporary TString to const char *
1448
1449 * mcamera/MCameraCentralPix.[h,cc]:
1450 - changed fDC from Float_t to Int_t
1451
1452 * mhflux/MHCollectionArea.cc, mhflux/MHDisp.cc, mhflux/MHEnergyEst.cc,
1453 mhflux/MHFalseSource.cc, mhflux/MHThreshold.cc, mhbase/MFillH.cc,
1454 mastro/MAstroCamera.cc, mastro/MAstroCatalog.cc, mbase/MContinue.cc,
1455 mbase/MFilter.cc, mbase/MLog.cc, mbase/MParContainer.cc, mhbase/MH.cc,
1456 mbase/MParEmulated.cc, mbase/MStatusDisplay.cc, mbase/MTime.cc,
1457 mhbase/MH3.cc, mhbase/MHn.cc,mhflux/MHAlpha.cc, mhist/MHCamera.cc,
1458 mhflux/MHEffectiveOnTime.cc, mmuon/MHMuonPar.cc, mmovie/MMovieWrite.cc,
1459 mhflux/MHFalseSource.cc, mhist/MHCamEvent.cc,
1460 mmain/MEventDisplay.cc, mreflector/MHReflector.cc:
1461 - use MString::Format instead of Form
1462
1463 * msim/MHPhotonEvent.cc:
1464 - don't fill kNightSky primaries
1465
1466 * msim/MPhotonEvent.[h,cc]:
1467 - return the number of non NightSky photons
1468
1469 * msimcamera/MSimPSF.cc:
1470 - changed default for fSigma from 1 to -1
1471
1472 * mbase/MContinue.cc:
1473 - changed default title
1474
1475 * mfileio/MWriteRootFile.cc:
1476 - set kMustCleanup bit, otherwise it is not correctly deleted from
1477 the list of cleanups
1478
1479 * mhbase/MH3.[h,cc]:
1480 - added RecursiveRemove
1481
1482 * mhflux/MAlphaFitter.[h,cc]:
1483 - moved code to source file
1484 - improved setting of a new fFunc
1485
1486 * mhflux/MHAlpha.[h,cc], mhvstime/MHSectorVsTime.[h,cc]
1487 - added RecursiveRemove
1488
1489 * mjobs/MJSimulation.cc:
1490 - added MSimPSF
1491 - Show only the non NightSky photons in the size plot
1492 - changed the binning of BinningEvtWidth
1493
1494
1495
1496 2009/02/06 Daniela Dorner
1497
1498 * datacenter/db/include.php:
1499 - adapted status-query
1500
1501
1502
1503 2009/02/05 Daniel Hoehne-Moench
1504
1505 * datacenter/macros/filldotrun.C:
1506 - implemented new SuperArehucas version
1507
1508
1509
1510 2009/02/03 Thomas Bretz
1511
1512 * mastro/MAstroCatalog.[h,cc]:
1513 - searches now all catalogs also in the datacenter default path if
1514 the file could not be found
1515
1516 * mbase/MStatusDisplay.cc:
1517 - also print information about added tabs in batch mode
1518
1519 * mcorsika/MCorsikaEvtHeader.h:
1520 - fixed a comment
1521
1522 * mfileio/MWriteRootFile.cc:
1523 - added some more log-output
1524 - open a new /dev/null only if none with the same title already exists
1525 - added some comments
1526
1527 * mhflux/MHEffectiveOnTime.cc:
1528 - Don't call PaintText if FitH failed (as suggested by valgrind)
1529
1530 * mjobs/MJStar.cc, mjobs/MJCalibrateSignal.cc:
1531 - added a title to all MWriteRootFile
1532
1533 * mreport/MReportCC.cc:
1534 - added more comments
1535 - improved log-output
1536
1537
1538
1539 2009/02/03 Daniela Dorner
1540
1541 * datacenter/db/plotdb.php:
1542 - sequence as default when startup
1543
1544 * datacenter/db/plotdb.php, datacenter/db/plot.php:
1545 - added possibility to set size of plot
1546
1547
1548
1549 2009/02/03 Stefan Ruegamer
1550
1551 * datacenter/scripts/budb:
1552 - added getdbsetup
1553
1554
1555
1556 2009/02/02 Thomas Bretz
1557
1558 * mcamera/MCameraCentralPix.[h,cc]:
1559 - added data member fDC
1560 - increased class version number accordingly
1561
1562 * mreport/MReportCC.cc:
1563 - improved debug output
1564 - remove minus from the third argument in SCHEDULE
1565
1566 * mreport/MReportCamera.[h,cc]:
1567 - fixed for ver>=200812140
1568 - added InterpretePSSEN
1569 - added InterpreteLIQ
1570
1571 * msimcamera/MSimCamera.cc:
1572 - added a time-shift uniformly according to the bin-width
1573
1574
1575
1576 2009/01/30 Thomas Bretz
1577
1578 * RELEASE V2.2
1579
1580
1581 2009/02/02 Thomas Bretz
1582
1583 * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
1584 - fixed the regular expresssion
1585
1586
1587
1588 2009/01/30 Thomas Bretz
1589
1590 * datacenter/macros/fillcmt.C:
1591 - added
1592
1593 * datacenter/macros/plotstat.C:
1594 - extended loop to show all periods again
1595
1596 * msim/MPhotonData.cc:
1597 - don't change the sign of the cosines. The direction of the
1598 particle doesn't neet to be changed
1599
1600 * msimreflector/MSimReflector.cc:
1601 - change the rotation matrix to fit the change in MPhotonData
1602
1603
1604
1605 2009/01/29 Thomas Bretz
1606
1607 * melectronics/MPulseShape.cc:
1608 - changed spline range from -25/25 to -8/8
1609
1610 * mhflux/MAlphaFitter.cc, mhflux/MHAlpha.cc, mhflux/MHDisp.cc:
1611 - for sanity (thread safety) replaced Form by MString::Format
1612
1613 * mhflux/MHDisp.cc:
1614 - initialize fHalf as suggested by valgrind
1615
1616 * datacenter/macros/plotdb.C:
1617 - updated comments
1618
1619 * resources/calibration_spline.rc:
1620 - updated
1621
1622
1623
1624 2009/01/27 Thomas Bretz
1625
1626 * macros/rootlogon.C:
1627 - added new subdirectories
1628
1629 * melectronics/MAnalogSignal.[h,cc]:
1630 - added the posssibility to add a pulse from a TF1
1631 - removed the printout if out of range
1632 - returns whether the range had to be adapted
1633 - changed the Discriminate function to allow for giving a start
1634 and end time of the search
1635 - imporved the fining of the falling and rising edge
1636 - removed the printout in Discriminate
1637
1638 * msimcamera/MSimCamera.[h,cc]:
1639 - moved the pulse shape specific code into a new class MPulseShape
1640 - Fixed the range of the digitization
1641
1642 * melectronics/MPulseShape.[h,cc]:
1643 - added
1644
1645 * melectronics/Makefile, melectronics/ElectronicsLinkDef.h:
1646 - added MPulseShape
1647
1648 * msimcamera/MSimGeomCam.[h,cc]:
1649 - Fixed the time window for random photons (Maybe move to a later
1650 step in the analysis?)
1651
1652 * msimcamera/MSimReadout.cc:
1653 - call SetReadyToSave for the run-header
1654 - added some debug output in case of failure
1655
1656 * msimcamera/MSimSignalCam.[h,cc]:
1657 - subtract the trigger position of any
1658
1659 * msimcamera/MSimTrigger.cc:
1660 - some changes to the debug output
1661
1662 * mjobs/MJSimulation.[h,cc]:
1663 - added
1664
1665 * mjobs/Makefile, mjobs/JobsLinkDef.h:
1666 - added MJSimulation
1667
1668 * ceres.cc, showlog.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
1669 - added parenthesis suggested by compiler
1670
1671 * mbase/MParEnv.cc:
1672 - included TClass for newwer root versions
1673
1674 * msimreflector/MReflector.cc:
1675 - fixed return if read file was not existing
1676
1677 * msimrelfector/MSimReflector.cc:
1678 - added sanity check if reflector is valid
1679
1680 * datacenter/macros/insertdataset.C:
1681 - added fPriority
1682
1683 * datacenter/macros/plotoptical.C:
1684 - write a root-file as the other plot-macros do
1685
1686 * mreflector/MHReflector.cc:
1687 - added some SetDirectory(NULL), although this class is a candidate
1688 for removal
1689
1690 * mjobs/MJCut.cc, mjobs/MJCalibrateSignal.cc:
1691 - make the CheckEnv fail if kFALSE is returned
1692
1693
1694
1695 2009/01/26 Thomas Bretz
1696
1697 * Makefile:
1698 - added mcorsika, msim, msimreflector, msimcamera and
1699 msimelectronics
1700 - added readcorsika
1701
1702 * mbase/Makefile, mbase/BaseLinkDef.h:
1703 - added MParEnv
1704
1705 * mbase/MParEnv.[h,cc]:
1706 - added
1707
1708 * mbase/MParameters.[h,cc]:
1709 - added ReadEnv to all classes
1710
1711 * mbase/MParList.cc:
1712 - return the container within MParEnv if MParEnv found
1713
1714 * mbase/MParContainer.cc:
1715 - fixed a typo
1716
1717 * manalysis/MEventRateCalc.cc:
1718 - added a comment
1719
1720 * melectronics/MAnalogChannels.[h,cc]:
1721 - made the GetNum* unsigned
1722 - added new member functions to just initialize one size
1723
1724 * mraw/MRawRunHeader.[h,cc]:
1725 - added a possibility to just init the number of pixels
1726
1727 * msimcamera/MSimReadout.[h,cc]:
1728 - get the number of output channels from the camera geometry
1729 - initialize the runheader in ReInit
1730 - initialize the data arrays from the run-header in reinit
1731
1732 * mimage/MHHillas.cc:
1733 - the default binning is not scales by 0.9 anymore
1734
1735 * mmc/MMcEvtBasic.h:
1736 - added new type "artificial"
1737
1738 * mraw/MRawRunHeader.cc:
1739 - set header size in constructor to 0
1740
1741 * msimcamera/MSimCalibrationSignal.[h,cc]:
1742 - we need fEvt and fTrigger always
1743 - renamed ReInit to CallReInit
1744 - set photon primary type
1745 - set number of photons from 50 to 5
1746
1747 * msimcamera/MSimRandomPhotons.cc:
1748 - explicitly set weight to 1
1749
1750 * mjobs/Makefile:
1751 - added msim, msimreflector, msimcamera and mcorsika
1752
1753
1754
1755 2009/01/25 Thomas Bretz
1756
1757 * mbase/Makefile, mbase/BaseLinkDef.h:
1758 - added MLut
1759
1760 * mbase/MLut.[h,cc]:
1761 - added
1762
1763 * msimcamera/MSimCamera.[h,cc], msimcamera/MSimTrigger.[h,cc],
1764 msimcamera/MSimRadout.[h,cc], msimcamera/SimCameraLinkDef.h,
1765 msimcamera/Makefile, msimcamera/MSimCalibrationSignal.[h,cc],
1766 msimcamera/SimCameraIncl,h:
1767 - added
1768
1769 * mjobs/MJob.cc:
1770 - included TClass for newer root versions
1771
1772 * mreflector/MRflEvtData.cc:
1773 - repaced a use of MHexagon by a direct use of MGeomCam
1774
1775 * melectronics/MAvalanchePhotoDiode.[h,cc]:
1776 - added some getters
1777 - remobved some obsolete comment
1778 - set entries to 1 by default
1779
1780 * mgeom/MGeomCam.[h,cc]:
1781 - split the Get[Max,Min]Radius into two member functions
1782 - added the HitDetector based on the maximum radius calculated
1783
1784 * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
1785 - removed overloading of the new HitDetector
1786
1787 * mgeom/MGeomPix.[h,cc]:
1788 - reset fUserBits in constructor according to a suggestion by valgrind
1789 - added GetT member function
1790
1791 * mjobs/MJSpectrum.cc:
1792 - replaced some Form calls for sanity by MString::Format
1793 - check the result of CheckEnv
1794
1795 * mjobs/MJStar.cc:
1796 - check the result of CheckEnv
1797
1798 * mjobs/MJob.cc:
1799 - fixed a typo in the name for the seed value resource
1800
1801 * mraw/MRawRunHeader.h:
1802 - added a getter for run type point run
1803
1804 * msignal/MSignalCalc.cc:
1805 - don't execute Process at all if fPedestal==NULL
1806
1807 * msignal/MSignalCam.cc:
1808 - aded case 10 and 11 to GetPixelContent
1809
1810 * msim/MHPhotonEvent.cc:
1811 - replaced case 4 by using the traversal distance in the 0-pixel
1812
1813 * msimcamera/MSimSignalCam.cc:
1814 - set pixel only to used if contents>0
1815
1816 * msimcamera/MSimTrigger.[h,cc]:
1817 - added ReadEnv for setup from a resource file
1818 - compress the trigger list after deleting slots
1819 - initialize descriminator threshold with -1
1820 - check for the validity of the discr. th in PreProcess
1821
1822 * msimreflector/MReflector.[h,cc]:
1823 - store file name in title
1824 - added ReadEnv for setup from a resource file
1825
1826 * msimreflector/MSimReflector.[h,cc]:
1827 - changed copyright notice
1828 - added fDetectorMargin
1829
1830
1831
1832
1833 2009/01/24 Thomas Bretz
1834
1835 * mbase/MMath.cc:
1836 - added two explicit conversion to make it compile on my Ubuntu
1837 - Replaced some Form by MString::Format
1838 - included MString
1839
1840
1841
1842 2009/01/23 Daniela Dorner
1843
1844 * datacenter/db/showplots-ds.php, datacenter/db/tabs.php,
1845 datacenter/db/plot.php:
1846 - adapted path to new web file structure
1847
1848 * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php:
1849 - added option to group by date (year, month, night): pulldown in
1850 menu and adapted query
1851
1852 * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php
1853 datacenter/db/datasetinfo-aio.php:
1854 - enabled possibility to combine all group-bys
1855
1856 * datacenter/db/datasetinfo-aio.php:
1857 - enhances information printed in table in case of group-by
1858
1859 * datacenter/db/include.php:
1860 - adapted pulldown of status-group-by
1861
1862 * datacenter/db/menu.php:
1863 - added pulldown for sumtrigger-flag to sequinfo-menu
1864 - added function to print pulldown for group-by date
1865
1866
1867
1868 2009/01/23 Thomas Bretz
1869
1870 * mcorsika/MCorsikaEvtHeader.[h,cc], msim/MPhotonData.[h,cc],
1871 msimcamera/MSimExcessNoise.cc, msimreflector/MMirrorDisk.cc,
1872 msimreflector/MMirrorHex.cc, msimreflector/MMirrorSquare.[h,cc],
1873 msimreflector/MReflector.cc, msimreflector/MSimReflector.cc,
1874 melectronics/MAnalogSignal.cc:
1875 - moved code which needs TMath to source file
1876 - included TMath for newer root versions
1877 - included TObjArray for newer root versions
1878
1879 * msimcamera/MSimAPD.[h,cc], msimcamera/MSimBundlePhotons.[h,cc],
1880 msimcamera/MSimRandomPhotons.[h,cc]:
1881 - added
1882
1883 * melectronics/Makefile, melectronics/MAnalogChannels.[h,cc],
1884 melectronics/ElectronicsIncl.h, melectronics/ElectronicsLinkDef.h,
1885 melectronics/MDigitalSignal.[h,cc],
1886 melectronics/MAnalogSignal.[h,cc],
1887 melectronics/MAvalanchePhotoDiode.[h,cc]:
1888 - added
1889
1890 * msim/M*.cc, msimreflector/M*.cc, msimcamera/M*.cc:
1891 - changed copyright notice
1892
1893 * mjobs/MJob.[h,cc]:
1894 - for convinience replaced GetEnvValue by GetEnvValue2
1895 - added initialization of the random number generator
1896
1897 * ceres.cc, mcorsika/CorsikaIncl.h:
1898 - added
1899
1900
1901
1902 2009/01/22 Thomas Bretz
1903
1904 * mraw/MRawRunHeader.h:
1905 - added new functions to access the runtype
1906
1907 * msim/MPhotonData.cc:
1908 - removed some obsolete comments
1909
1910 * msim/MPhotonEvent.[h,cc]
1911 - added some comments
1912 - added new member function GetFirst and GetLast
1913 - UnSort the array after reading new data
1914 - removed some old obsolete code
1915 - added new meber function Sort and IsSorted
1916
1917 * msimreflector/MSimReflector.cc:
1918 - force sorting of the array
1919
1920 * msimcamera/MSimPSF.[h,cc], msimcamera/MSimGeomCam.[h,cc],
1921 msimcamera/MSimExcessNoise.[h,cc], msimcamera/MSimSignalCam.[h,cc]:
1922 - added
1923
1924
1925
1926 2009/01/21 Thomas Bretz
1927
1928 * mbase/BaseLinkDef.h, mbase/Makefile:
1929 - added MQuaternion
1930 - added MReflection
1931
1932 * mbase/MQuaternion.[h,cc], mbase/MReflection.[h,cc]:
1933 - added
1934
1935 * mbase/MArrayI.[h,cc]:
1936 - added a few new functions (ReSort, Add, Find and AddUniq)
1937
1938 * mbase/MMath.cc:
1939 - replaced delete by delete[] where appropriate
1940
1941 * mgeom/MGeomCam.h:
1942 - added new virtual functions HitFrame and HitDetector
1943 - included MQuaternion
1944
1945 * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
1946 - added new functions HitFrame and HitDetector:
1947
1948 * msim/MHPhotonEvent.cc:
1949 - removed the reference to MCamera
1950
1951 * mgeom/MGeomPix.[h,cc], mgui/MHexagon.[h,cc]:
1952 - moved DistanceToPrimitive from MHexagon to MGeomPix
1953 - moved the funtions to calculate overlapping areas
1954 also, but they are still in a comment
1955
1956 * mgui/MHexagon.[h,cc]:
1957 - started implementing a rotation angle
1958 - added data meber fPhi
1959 - increased class version number
1960
1961 * mhist/MHCamera.cc, mtools/MagicJam.cc:
1962 - we don't have to use a MHexagon anymore caluclating
1963 DistanceToPrimitive
1964
1965 * msimreflector/MMirror.[h,cc], msimreflector/MMirrorSquare.[h,cc],
1966 msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorDisk.[h,cc],
1967 msimreflector/MReflector.[h,cc], msimreflector/MSimReflector.[h,cc],
1968 msimreflector/Makefile, msimreflector/SimReflectorLinkDef.h,
1969 msimreflector/SimReflectorIncl.h:
1970 - added
1971
1972
1973
1974 2009/01/21 Stefan Ruegamer
1975
1976 * datacenter/scripts/read_lapalma-tapes:
1977 - added check of the tape slot when exporting the tapes
1978
1979
1980
1981 2009/01/20 Thomas Bretz
1982
1983 * mjobs/MJob.h:
1984 - added Esc member function
1985
1986 * msim/MPhotonData.[h,cc], msim/MPhotonEvent.[h,cc],
1987 msim/MSimAbsorption.[h,cc], msim/MSimPointingPos.[h,cc],
1988 MHPhotonEvent.[h,cc], msim/Makefile, msim/SimIncl.h
1989 msim/SimLinkDef.h:
1990 - added
1991
1992
1993 2009/01/19 Thomas Bretz
1994
1995 * mfileio/MWriteRootFile.cc:
1996 - simplified how the rules are evaluated using TPregexp
1997 - by this the rules got more powerful
1998
1999 * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
2000 - changed ols style rule to new style
2001
2002
2003
2004 2009/01/18 Thomas Bretz
2005
2006 * mbase/BaseLinkDef.h, mbase/Makefile:
2007 - added MSpline3
2008
2009 * mcorsika/MCorsikaEvtHeader.cc:
2010 - some little cosmetics
2011
2012 * mcorsika/MCorsikaEvtHeader.h:
2013 - added some missing getters
2014
2015 * mcorsika/MCorsikaRunHeader.cc:
2016 - removed some obsolete comments
2017 - reordered some comments
2018
2019 * mextralgo/MExtralgoSpline.h:
2020 - changed default in GetIntegral from true to false
2021
2022 * mraw/MRawEvtHeader.h:
2023 - added Setter for DAQEventNumber
2024
2025 * mraw/MRawRunHeader.cc:
2026 - start pixel hardware indices with 1 not with 0
2027
2028
2029
2030 2009/01/17 Thomas Bretz
2031
2032 * mbase/MMath.[h,cc]:
2033 - added a new function RndmExp which should be a tiny bit faster than
2034 root's own implementation because it ises Rndm() instead of Uniform()
2035
2036 * mextralgo/ExtralgoIncl.h:
2037 - added MArrayF
2038
2039 * mextralgo/MExtralgoSpline.[h,cc]:
2040 - divided FindY into FindYup and FindYdn to avoid an obsolete if-clause
2041 - added a new member function to return the integral function of the
2042 spline. This is useful to init a new spline and use it for
2043 producing the proper random distribution.
2044
2045 * mpedestal/MPedestalSubtractedEvt.[h,cc]:
2046 - added Print() function
2047
2048 * mraw/MRawEvtData.[h,cc]:
2049 - added a member function to Reset the arrays
2050 - added member function to set the pixel indices
2051 - Improved the new Set function
2052
2053 * readcorsika.cc:
2054 - added
2055
2056
2057
2058 2009/01/16 Daniel Hoehne-Moench
2059
2060 * datacenter/scripts/mcsequences:
2061 - implemented sumtrigger -> modes, fTriggerFlagKEY
2062 - fPriority(MCSequenceProcessStatus) is now filled into the mcdb
2063
2064 * datacenter/scripts/fillmccallisto, fillmcstar:
2065 - bugfix: changed argument of $primaries from [$s+$s] to [$s]
2066
2067 * datacenter/macros/fillcamera.C:
2068 - changed NumPheFromDNSB to float(7,3)
2069 - fPriority(MCRunProcessStatus) is now filled into the mcdb
2070
2071 * datacenter/macros/fillmccalib.C:
2072 - minor changes, bugfix (wrong column name for mcdb)
2073
2074 * datacenter/macros/fillmcsignal.C:
2075 - definition of some parameters changed according to fillsignal.C
2076 - minor changes, deleted unnecessary code
2077 - implemented if clause for HiLo-Parameters. Instead of
2078 seqno<200000 the fAmplFadcKEY is queried in the mcdb for each
2079 sequence. For MUX MCs the HiLo-Parameters are not calculated.
2080
2081
2082
2083 2009/01/15 Thomas Bretz
2084
2085 * callisto.cc:
2086 - cosmetics to output
2087
2088 * mcorsika/MCorsikaRunHeader.cc:
2089 - cosmetics (removed a ;;)
2090
2091 * mhist/MHEvent.[h,cc]:
2092 - ReInit to allow the change of the camera geoemtry in ReInit
2093
2094
2095
2096 2009/01/15 Stefan Ruegamer
2097
2098 * datacenter/scripts/dodatacheck:
2099 - removed the _E in the find command; files from 2008/06/04 on do
2100 not have it any more
2101
2102
2103
2104 2009/01/14 Daniel Hoehne-Moench
2105
2106 * datacenter/scripts/sourcefile:
2107 - extended errorcoding on mc run process status
2108
2109 * datacenter/scripts/runmccallisto, runmcstar:
2110 - deleted unnecessary lines, adapted to primary structure
2111
2112 * datacenter/macros/fillmcsignal.C, fillmccalib.C, fillmcstar.C:
2113 - added
2114
2115 * datacenter/scripts/fillmccallisto, fillmcstar:
2116 - added
2117
2118
2119
2120 2009/01/14 Thomas Bretz
2121
2122 * readraw.cc:
2123 - check first whether the file exist before adding the extension
2124
2125 * mbase/MMath.[h,cc]:
2126 - added function to Re-sort an array
2127
2128 * mfileio/MReadMarsFile.cc, mfileio/MWriteRootFile.cc:
2129 - Improved output
2130
2131 * mfileio/MWriteRootFile.cc:
2132 - fixed a problem which prevented to open more than one /dev/null
2133 devices independantly
2134
2135 * mgeom/MGeomCam.cc:
2136 - cosmetics
2137
2138 * mgeom/MGeomCamDwarf.h:
2139 - fixed a typo in an ifdef
2140
2141 * mgeom/MGeomPix.[h,cc]:
2142 - added funtion to return positon as TVector2
2143 - slightly improved the algorithm to check IsInside
2144 - fixed the conditional signs for the orientation of pixels
2145 in GetDirection
2146
2147 * mmain/MEventDisplay.cc:
2148 - Give different names to the MPedestalSubtract tasks
2149 - fixed buttons
2150 - call AddGeometryTags after ReInit to allow reading new geometries in
2151 ReInit
2152
2153 * mmc/MMcEvtBasic.h:
2154 - added a new primary type kNightSky
2155
2156 * mraw/MRawEvtPixelIter.h:
2157 - replaced type of the number of bytes by UInt_t
2158
2159 * mraw/MRawRunHeader.h:
2160 - allow to validate the magic-number from outside (for MCs)
2161
2162 * datacenter/scripts/runcorsika:
2163 - added a lot of comments
2164 - reordered values in input card
2165 - switched off a lot of obsolete output
2166 - changed the Magnetic field to a value corresponding to the location of
2167 MAGIC at 2200m height valid for January 2009. (The old value never took
2168 place there?!) The value was taken from www.noaa.gov/geomagmodels
2169
2170
2171
2172 2009/01/12 Daniel Hoehne-Moench
2173
2174 * datacenter/db/menu.php:
2175 - bugfix: now the SumTriggerFlag is correctly displayed in the web
2176 interface
2177
2178
2179
2180 2009/01/09 Daniel Hoehne-Moench
2181
2182 * datacenter/macros/fillcamera.C
2183 - implemented new variables: zbinmin, zbinmax, number of
2184 sumtriggers, sum trigger flag
2185 - bugfix: for P and C runs the mirror fraction and the impact
2186 parameter had unreasonable values (negative) which were filled
2187 into the mcdb, now->0
2188
2189 * datacenter/scripts/fillcamera, mcsequences:
2190 - implemented call of getdbsetup
2191
2192
2193
2194 2009/01/09 Stefan Ruegamer
2195
2196 * datacenter/scripts/buildsequenceentries
2197 - corrected IFS argument
2198
2199
2200
2201 2009/01/08 Stefan Ruegamer
2202
2203 * datacenter/scripts/filesondisk
2204 - added S and N runs
2205
2206
2207
2208 2009/01/07 Daniel Hoehne-Moench
2209
2210 * datacenter/macros/filldotrun.C:
2211 - updated column counting numbers
2212 - included a check for the number of columns in the runfiles
2213
2214 * datacenter/macros/buildsequenceentries.C:
2215 - implemented SumTriggerFlagKEY for sequence building
2216
2217
2218
2219 2009/01/06 Thomas Bretz
2220
2221 * mbase/MArrayB.h, mbase/MArrayD.h, mbase/MArrayF.h,
2222 mbase/MArrayI.h, mbase/MArrayS.h:
2223 - removed GetSize
2224
2225 * mbase/MArrayF.h:
2226 - added Add()
2227 - added AddClipped
2228
2229 * mbase/MMath.[h,cc]:
2230 - implemented ReSort
2231
2232 * mcorsika/MCorsikaEvtHeader.cc:
2233 - removed obsolete comments
2234
2235 * mcorsika/MCorsikaRead.cc:
2236 - cosmetics
2237
2238 * mcorsika/MCorsikaRunHeader.[h,cc]:
2239 - added comments about file contents
2240 - added fWavelengthMin/Max
2241
2242 * mextralgo/MExtralgoSpline.[h,cc]:
2243 - renamed SearchY to SearchYdn
2244 - fixed a problem in SearchYup (must be ++i instead of i++)
2245 (this is relatively unimportant because it was only used
2246 in the determination of the pulse width which we never
2247 really used)
2248 - added a sanity/range-check to SearchYup and SearchYdn
2249 - added a comment
2250 - changed the order of arguments in EvalDeriv1
2251 - changed the order of arguments in EvalDeriv2
2252 - accelerated EvalDeriv1 (one multiplication less)
2253 - added Deriv1 function
2254 - made SearchYup and SearchYdn public
2255
2256 * mjobs/MDataSet.cc:
2257 - removed an obsolete return statement
2258
2259 * mraw/MRawEvtData.[h,cc]:
2260 - changed pointer in AddPixel to reference
2261 - added a Set function
2262
2263 * mraw/MRawRunHeader.[h,cc]:
2264 - added a lot of fixes for wrong run numbers written by Arehucas
2265 - added a fix for strange file numbers written by Arehucas
2266 - added functions as monta carlo interface to set contents
2267
2268 * msignal/MSignalCam.cc:
2269 - defined a case 9
2270
2271
2272
2273 2009/01/05 Thomas Bretz
2274
2275 * mhbase/MH.h:
2276 - commited missing changes from last year
2277
2278 * merpp.cc:
2279 - fixed a description
2280
2281 * sponde.cc:
2282 - added "Multiple dataset at once"
2283
2284 * star.cc:
2285 - removed obsolete -ff option from output
2286
2287 * mbase/MTime.[h,cc]:
2288 - added GetBinary
2289 - added WriteBinary
2290
2291 * mbase/MEvtLoop.cc:
2292 - display paused status in status line
2293 - improved pause handling
Note: See TracBrowser for help on using the repository browser.