source: trunk/MagicSoft/Mars/NEWS@ 5972

Last change on this file since 5972 was 5841, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 27.0 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - added two classes mreport/MReportStarguider.cc and
5 mreport/MReportStarguider.h for implementing starguider-data
6
7 - For implementing the starguider-data the class MReportStarguider has
8 been added to mreport/ReportLinkDef.h and to mreport/Makefile
9
10 - added two containers ( MReportStarguider, MTimeStarguider ) and
11 added MReportStarguider to the list in merpp.cc
12
13 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
14 values were lower than they should. This was more visible for high
15 energy (Size) events.
16
17 - Made MExtractTimeAndChargeDigital Filter the default for callisto
18
19 - added a new loop to callisto to support the correct extraction of
20 the pedestal and pedestal rms through the signal extractor
21
22 - added class to perform fourier tranformation of a hexagonal structure
23 (MHexagonalFT)
24
25 - added class to perform fourier tranformation of a hexagonal structure
26 in a tasklist (MHexagonalFTCalc) example: hft.C
27
28 - added class to enhance the MCerPhotEvt from the Magic camera geometry
29 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
30 small pixels, example: extendcam.C
31
32 - added possibility to write data to memory (TTree) using MReadTree
33
34 - added possibility to read a TTree stored only in memory by MReadTree
35
36 - new classes to deal with the interleaved calibration events:
37 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
38
39 - implemented filters to callisto to skip calibration events
40
41 - changed callisto to calculate three kinds of pedestals and pedestal rms:
42 + fundamental pedestal (MPedPhotFundamental): extracted directly from
43 the slices by statistics
44 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
45 signal extractor without randomization
46 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
47 with the signal extractor with randomization (extraction window is
48 randomly fixed)
49 The thir kind of pedestal is not yet implemented (for speed reasons) as
50 long as nobody really needs it:
51 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
52 extracted with the signal extractor with randomization
53
54
55
56 *** Version 0.8.6 (2004/10/05)
57
58 - New combined signal and time extractor
59 MExtractTimeAndChargeDigitalFilter
60
61 - The Report for the trigger section in the CC run summary has been
62 updated, and now the IPRs (Individual Pixel Rates) are available.
63
64 - new macros for database interaction: filldotrun.C, filldotrbk.C
65
66 - added new program which can convert colored output which was redirected
67 into a file back into colored text (for example to display it with
68 more): showlog
69
70 - added new program to display an MStatusArray of plots (stored with
71 MStatusDisplay) from a file: showplot
72
73 - Added support for Sequences (MSequence). Sequences are blocks of run
74 files containing the same calibration and belonging to the same
75 source
76
77 - Added a new task (MTaskEnv) which can be used in setup files to switch
78 between different tasks (for example to choose a signal extractor)
79
80 - Implemented automatic file splitting in MWriteRootFile
81
82 - After image cleaning an island index is assigned to all used pixels.
83 The index corresponds to the order of the islands in size.
84
85 - added a cleaning which takes signal height _and_ arrival time into
86 account: probability cleaning (for more details see MImgCleanStd)
87
88 - added a cleaning which takes takes the absolute number of photons
89 times the area ratio as cleaning level
90 (for more details see MImgCleanStd)
91
92 - Changed calculation of image parameters such, that it can be done
93 for all used pixels or the pixels with a defined island index only
94
95 - implemented new image parameters displaying the number of islands,
96 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
97
98 - event display in executable changed to support also calibrated files
99 (done with MJCalibrateSignal)
100
101 - added program doing the calibration and the signal extraction
102 and signal calibration: callisto Most part of the setup is done
103 by a resource file: callisto.rc
104
105 - implemented support for pixels with negative IDs (Raw file format
106 version 4)
107
108 - implemented an new option in merpp (--auto-time) to get the time
109 range for cc and/or caco data from the run header of the raw data
110
111 - New star-program (star and MJStar). Taking calibrated data from
112 callisto/MJCalibrateSignal as input. The setup is done through
113 a resource file: star.rc
114
115 - Added possibility to setup the eventloop in the mars-executable
116 Camera Display by a resource file: mars.rc
117
118 - The the mars-executable Camera Display can now also read
119 calibrated data files written by callisto/MJCalibrateSignal
120
121 - Added a new class which can calculate the source position in
122 the camera from a pointing model known to be correct and
123 the pointing model used for observations (MSrcPosFromModel)
124
125 - added a new version of the class calculating the effective on-time
126 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
127 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
128 MHTimeDiffTheta.
129
130 - added the possibility to count how often a signal is above (or
131 below) a certain threshold in MHCamEvent and MHCamEventRot (this
132 can replace MHTriggerLvl0)
133
134 - added ore convinient ways to set the axis-titles of your histograms
135 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
136 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
137
138
139
140 *** Version 0.8.5 (2004/08/06)
141
142 - new Signal Extractors: MExtractFixedWindowSpline
143 and MExtractAmplitudeSpline
144
145 - implementes interleave in merpp to be able to merpp parts of a file
146
147 - implemented force-functionality to merpp
148
149 - star display to display star catalogs (MAstroCatalog)
150
151 - star display to 'mirror' stars to the camera (MAstroCamera)
152
153 - implemented a new cleaning option which allows cleaning scaled with
154 the real ratio of the rms depending on the pixel size, not only the
155 square root of the pixelsize (MImgCleanStd, MCameraData)
156
157 - removed obsolete MBlind* classes
158
159 - Signal extractor taking the AB flag into account implemented (this makes
160 an odd number of slices for signal extraction possible
161 (MExtractSignalABcorr)
162
163 - implemented a class extracting the pedestal from the raw-data (events)
164 itself using empty lo-gain (MpedCalcFromLoGain)
165
166 - Added mean values to MPedPhotCam
167
168 - Added Makefile for Darwin (this OS is NOT officially supported!)
169
170
171
172 *** Version 0.8.4 (2004/04/19)
173
174 - new fast arrival time extractor using cubic splines:
175 MExtractTimeFastSpline
176
177 - implementes multi-argument support in MDataChain
178 ("pow(a, b)")
179
180 - implemented double reference support in MDataChain
181 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
182
183 - added support in MF for expressiond like
184 "MHillas.fWidth<2*<MHillas.fLength"
185
186 - MDataChain is now able to support variables like [0], [1], ...
187 which can be used in fit functions as parameters. The interface
188 is implemented through the new virtual function
189 MParContainer::SetVariables
190
191 - added new class MArrivalTimeCam/MArrivalTimePix:
192 Storage containers to hold the ArrivalTime of the camera/pixel
193
194 - added new classes for the calibration of relative arrival times:
195 MCalibrationRelTimePix and MCalibrationRelTimeCam
196
197 - added new classes to extract the signal of the blind pixel and the
198 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
199
200 - added new classes for the bad-pixels treatment (MBadPixels*)
201 which are more powerfull than the old ones (MBlindPixel*)
202 and will replace them.
203
204 - added filter against cosmics: MFCosmics
205
206 - added new class MArrivalTimeCalc2:
207 Calculates the arrival time as the signal weighted mean of the time
208 slices in the maximum window
209
210 - added a new macro call pointspreadfucntion.C that fits with a 2D
211 gaussian the DC spot for an star. It gives you the RMS of
212 the PSF and the center of the star, very useful for misspointing
213 studies.
214
215 - added support for multi-telescope camera files. Added classes
216 MStereoCalc and MStereoPar, classes to calculate and store shower
217 parameters calculated from the data of two telescopes, for the MC
218 studies regarding the MAGIC clone.
219
220 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
221 MC data calibrated in photons instead of ADC counts.
222
223 - added three macros to show the calibration and analysis chain of
224 MC data. The macro starmc.C does both calibration and analysis, producing
225 an output containing Hillas parameters for each event. The macro
226 mccalibrate.C does just the calibration and writes out a file containing
227 pixel information in photons instead of FADC data. The macro starmc2.C
228 reads in such a file and produces an output with Hillas parameters.
229
230 - added MPedPhotCalc to compute pedestals in units of photons, see
231 macro pedphotcalc.C
232
233 - added all class to perform the calibration, see macro calibration.C
234
235 - added class MFFT to perform Fast Fourier Transforms
236
237 - added class MSimulatedAnnealing to perform simulated annealing
238 minimizations
239
240 - added new macro bootcampstandardanalysis.C which holds the skeleton
241 of the analysis chain discussed in the december bootcamp.
242
243 - added support for DAQ raw data file format V2
244
245 - implemented an arbitrary time stamp for the events from raw-data
246 files with file version<3. It is calculated from the run number,
247 the date of start and the FADC clock tick from the first module
248
249 - implemented the correct decoding of the event time-stamp
250 coming from the DAQ for raw-data files with file-version>2
251
252 - added a new classes storing the pedestals in units of photons:
253 MPedPhotPix, MPedPhotCam
254
255 - added support for DC current files from the camera control
256
257 - added support for start- and stop-time when merpping report files
258
259 - added MReportCC storing the weather data from the CC-REPORT
260
261 - added class to fill trainings and test matrices (MTFillMatrix)
262
263 - added a filter performing a software trigger (MFSoftwareTrigger)
264
265 - Added classes to perform parts of the standard analysis (Jobs):
266 + MJPedestals
267 + MJCalibration
268 + MJExtractSignal
269 Note: All of them are preliminary!
270
271 - Added Iterator to iterate over files giving only the run-number
272
273 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
274 the evolution of a sector vs time
275
276
277
278 *** Version 0.8.3 (2003/12/05)
279
280 - adapted Random Forest classes to allow the use with MC
281 multi-telescope files which can be produced with the coming
282 camera version 0.7.
283
284 - added classes to read and interprete central control report files
285 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
286
287 - enhanced merpp (the executable) to support .raw and .rep files.
288
289 - added classes for light calibration (MCalibration* and
290 MHCalibration*) by Markus Gaug. Further work has to be and will
291 be done soon.
292
293 - Added a preliminary 'synchronizer' (MReadReports) which will
294 replace MReadMarsFile as soon as it is finished.
295
296 - Added a tutorial macro demonstrating how report files are merpped
297 and how they can be read from the root file in the correct order
298 of time (readrep.C)
299
300 - Added a generalized histogram (similar to MH3) called MVsTime
301 which allows to plot variables (or rules - MDataChain - of
302 variables) vs time. For an example have a look at tempvstime.C.
303
304 - Changed the name of the event trees:
305 + Events --> Events
306 + PedEvents --> Pedestals
307 + CalEvents --> Calibration
308
309 - changed name of MTime in the event trees from MRawEvtTime to MTime
310
311 - added displaying the sector indices to the mars event display
312
313 - Magic Online Analysis (MOnA) implemented in a first version
314 (see mona.cc, MOnlineDump and MOnlineDisplay)
315
316 - added classes to calculate event rate
317 (preliminary: MEventRateCalc, MEventRate)
318
319 - added new executable 'readdaq' to read *.raw files from the DAQ directly
320
321 - added classes dealing with the telescope pointing position (MPointing*)
322
323 - implemented the 'final' Mars time stamp based on some experiences with
324 the new 'Synchonizer'
325
326
327
328 *** Version 0.8.2 (2003/11/10)
329
330 - accelerated standard analysis by a factor of 6-8 ...
331 + doing precalculations in MGeomCam for the pixel area ratio
332 + creating a look up table for the single pixels in MCerPhotEvt
333
334 - added task to calculates weights in case you want to 'change'
335 the energy spectrum of a monte carlo file
336 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
337
338 - added a new executable star which implements the
339 star.C macro as precompiled executable. Currently a flexible
340 setup is not possible, but a 'input card' setup will follow.
341
342 - Starting to implement Multi-Telescope-Support based on the
343 upcomming camera version 0.7. The base for a general support
344 is implemented and the star-functionality is proven to work.
345
346 - Replaced Event-Display in and Camera-Display in the Mars GUI
347 executable by a more convinient display base on MStatusDisplay.
348
349 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
350
351
352
353 *** Version 0.8.1 (2003/10/20)
354
355 - added signal subtraction for pure on data by means of fitting
356 the background in the off region or by performing a combined
357 signal/background fit. Provides necessary histograms for
358 obtaining energy spectra and a light curve.
359
360 - added classes to perform and study the selection of the
361 2nd Level Trigger on MC data (example in triglvl2.C macro)
362
363 - added pedestal calculation
364
365 - implemented "democratic cleaning" (tail cut value proportional
366 to pixel area) according to Wolfgang's suggestion.
367
368 - added Sigmabar treatment (calculation and basic histogramming)
369
370 - added basic routines to apply padding
371
372 - added first implementation of MARS-based source visibility plotter
373 (needs to be linked against slalib, preliminary version)
374
375 - enhanced functionality of data chains: random numbers, conversion
376 functions and access to MHMatrix objects
377
378 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
379 numbers under certain circumstances (runs with 0 events included)
380
381 - fixed a bug in the general filter MF (didn't work on some systems
382 at all)
383
384 - fixed a bug in chaining files, which caused the analysis to crash or
385 ignore files
386
387 - implemented more geometry classes describing the parameters used
388 to simulate the PMT camera
389
390 - added new Monte Carlo classes containing the setup of the different
391 programs in the MC chain.
392
393 - added a (preliminary) general task to evaluate chi-square of a given
394 parameter in an eventloop.
395
396 - first implementation of a container describing the observatory
397 location (Long, Lat, etc)
398
399 - added Random Forest - method for g/h-separation
400
401 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
402 (this means, that it is compiling, but not yet fully tested)
403
404 - added a new status display which can show the present status
405 of histograms while an eventloop is running (MStatusDisplay,
406 an example can be found at status.C)
407
408 - reorganized directories:
409 classes describing the image --> mimage
410 classes containing Monte Carlo Histograms --> mhistmc
411 classes for Random Forest method --> mranforest
412
413 - added (event-)weights to fill histograms
414
415 - colors in logging output to screen
416
417 - changes to the Image Parameter declaration:
418 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
419 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
420 + MHillasExt now derives from MParContainer instead of MHillas
421 --> Files written with the old definition are more or less unreadable
422
423 - reading of reflector files
424
425 - display data from reflector files in the camera
426
427 - implemented currents (and display them in the camera)
428
429 - logarithmic scale in camera
430
431 - added class to iterate through directory contents (MDirIter)
432
433
434
435 *** Version 0.8 (2002/11/18)
436
437 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
438
439 - corrected 48(!) wrong entries in the Next Neighbor table of the
440 Magic Camera (all in the inner part of the outer ring, mostly
441 missing a single NN)
442
443 - Fixed a bug in the table describing the Next Neighbours of the
444 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
445 have any neighbour)
446
447 - changed trigrate.C: now it calculates the pure NSB triggers from
448 a camera file (generated with no showers), so there is no need
449 to introduce them by hand in the BgR array (for more details
450 please ask Abelardo)
451
452 - added MHHadronness (and MHadronness) as a general facility to evaluate
453 the quality of a gamma-hadron seperation method
454
455 - changed MWriteAsciiFile to accept rules (MDataChain)
456
457 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
458 must be replaced by calles to MWriteAsciiFile::AddColumn and
459 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
460 changed.
461
462 - Implemented generalized event-matrices (one row per event)
463 (MHMatrix)
464
465 - implemented the one dimensional composite probabilities
466 (MHCompProb, MCompProbCalc, comprob.C)
467
468 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
469 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
470
471 - Added a camera display displaying the pixel numbers to the
472 event display gui.
473
474 - Added Monte Carlo Informations to event display gui
475
476 - Changed the camera display to display the pixel numbering
477
478 - Added three buttons to the camera display to change the palette
479
480 - Added the number of used and core pixels after image cleaning
481 to MHillas
482
483 - Changed the algorithm used in MHillas according to TDAS 02-03
484
485 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
486
487 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
488
489 - Added fCosDeltaAlpha to MHillasSrc
490
491 - The numbers of photons used to calculate fConc and fConc1 in
492 MHillasExt are now scaled with the pixel size, so that one get
493 a four times smaller value for the bigger pixels in the outer ring.
494
495 - added new task to smooth the camera contents (MCameraSmooth)
496
497 - added possibility to use interpolated pixel values for blind pixels
498 instead of removing it completely from the analysis
499
500 - Implemented the possibility to save the whole eventloop with
501 its setup to a file. This information can be read and from
502 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
503 and MEvtLoop::MakeMacro. If you find something not working, please
504 report - this stuff is still in a beta phase.
505
506 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
507 file having crab starfield, but also for all following files - fixed
508
509 - MTaskList::PrintStatistics can now be instructud to print also the
510 title, too: use PrintStatistics(0, kTRUE)
511
512 - Changed the image cleaning so that pixels with to many 'used'
513 neighbors are left used (to get rid of 'holes' in events)
514
515 - Introduced more output to the camera displays
516
517 - Added an array of histograms (eg one hist per run), MHArray
518
519 - Added a _preliminary_ version of the reader for CT1 PreProc files
520 (MCT1ReadPreProc)
521
522 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
523 (thanks to Raquel)
524
525 - added the first energy estimator (MEnergyEstParam, estimate.C,
526 estfit.C) using a parametrization
527
528 - Added some new Monte Carlo paremeter containers used to store
529 setup information from the MC chain (MMcConfigRunHeader,
530 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
531
532
533
534 *** Version 0.7 (2002/04/30)
535
536 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
537 the pedestal mean value was saved incorrectly. For files from
538 this versions we substract 0.5 from the pedestal mean.
539 WARNING: This may effect your results, so don't wonder...
540
541 - First implementation of an algorithm using only triggered events
542 for the collection area calculation
543
544 - Ascii Output can now also be used for parameter containers which
545 doesn't overload MParCointainer::AsciiWrite
546
547 - The Ascii Output is now also capable of writing single data members
548 of one container
549
550 - You are now able to change the order of the values written to the
551 ascii file
552
553 - You can now specify a conversion factor for each data member written
554 to an ascii file. This may be usefull to change the units of the
555 data member (eg. degrees instead of millimeters in case of the
556 hillas parameters)
557
558 - Replaced old MHillas by a new structure which allows you to extend
559 the parameters stored in MHillas very easily:
560 see MHillas and MHillasExt
561
562 - Added classes to handle source dependancy of image parameters:
563 see MHillasSrc
564
565 - Added container (MBinning) to have a standard input for the binning
566 in different histograms (eg. the Energy bins should be the same in
567 all histograms)
568
569 - Changed Hillas histograms from mm to deg
570
571 - Added the flexible binning to the hillas histograms
572
573 - Added a filter for the alpha parameter (MFAlpha)
574
575 - It is now possible to write single data members of a class object to
576 an output stream instead of the whole container only
577
578 - Added a generalized filter for a data member:
579 MFDataMember filter("MHillas.fWidth", '<', 0.5);
580
581 - Added a generalized Filter parser for more difficult filter rules
582 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
583
584 - Added new Monte Carlo histograms:
585 MHMcEnergyImpact and MHMcEfficiency
586
587 - Added many new histograms needed for the flux calculation.
588
589 - Added a generalized histograms which can fill and show up to three
590 data members in either a one-, two- or three-dimensional histogram, eg:
591 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
592
593 - Added:
594 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
595 * calculation of <Theta> as a function of time (MHThetabarTime)
596 they are needed in the flux calculation in
597 order to select for a given bin in Theta (or time) the appropriate
598 effective collection area, which is assumed to be given as a function
599 of Theta and the true energy
600
601 - Added calculation of the migration matrix in the energy
602 (MHMcEnergyMigration):
603 the migration matrix describes the migration from the true (E_true)
604 to the estimated energy (E_est); it is needed to determine the
605 distribution of E_true from the measured distribution of E_est
606 by unfolding
607
608 - changed the color palette in the camera display to DeapSea.
609
610
611
612 *** Version 0.6 (2002/01/15)
613
614 - Introduce the option of disable pixels (MBlindPixels and
615 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
616 able to deal with Star Field NSB.
617
618 - Fixed a bug in the pedestals substraction
619
620 - Introduced verbosity levels
621
622 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
623
624 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
625 work correctly (thanks to Abelardo)
626
627 - Introduced correct treatment of the diffuse Night Sky Background
628 and NSB (MMcPedestalNSB)
629
630 - Corrected treatment of the electronic noise (MMcPedestalCopy)
631
632 - Introduced MMcRunHeaders which contains monte carlo run informations
633
634 - Added a 'Print'-Task (MPrint) which calls the Print function
635 of a parameter container for each event
636
637 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
638
639 - changes to be more efficient with root 3.02/06
640
641 - root 3.02/06 fixes:
642 + the memory leak when reading MRawEvtData
643 + loosing more time than necessary to update the progress bar
644
645 - MWriteAsciiFile is now capable of writing more than one container
646 in a line. For example: To be able to write Monte Carlo and
647 Hillas values (energy and alpha) in one line.
648
649
650
651 *** Version 0.5 (2001/11/06)
652
653 - Added new GUI functionality (Analysis)
654
655 - Added a camera display to be able to display events in the camera
656 together with the calculated hillas ellipse
657
658 - Added a 'Clone'-Task (MClone) which can clone a parameter container
659 object at any state of the analysis, so that the output are several
660 states
661
662 - Fixed a bug in the collection area error calculation
663 (Thanks to Ciro and Abelardo)
664
665 - Fixed a bug which causes merpp to crash in some environments
666
667 - Implemented auto enabling scheme for Branches to speed up reading
668 a lot (see MReadTree and MTask)
669
670 - Fixed a bug in the Histogram classes which caused histograms to
671 be written to a file by MWriteRootFile without request
672
673 - changed the object I/O from the old stylish root I/O to the new
674 'auto evolution scheme' This was done only for classes which are not
675 yet used in Monte Carlo files, so that these files are still readable.
676
677 - Added support for a progress bar in MEvtLoop and MReadTree
678 (see the Analysis Window in Mars for an example)
679
680 - Fixed a bug in the package creation which disturbed the conversion
681 between a mars version unpacked from a tar file and the repository.
682
683 - Changed the code to writer merpped (converted into root format)
684 raw files, to get faster (around 10%)
685
686
687
688 *** Version 0.4 (2001/09/20)
689
690 - This release is made to compile on a root version >= 3.00
691
692 - Fixed a bug which causes MReadTree to read the first file only
693
694 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
695
696 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
697
698 - Added a task to write several container to a root file (MWriteRootFile)
699
700 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
701
702 - Added calculation of the collection area (MMcCollectionAreaCalc)
703
704 - fixed some bugs in the Hillas calculation
705
706 - added filters to be able to control the task execution dependent on
707 a parameter (for example: the number of level 1 triggers in a MC-file)
708
709
710
711 *** Version 0.3 (2001/04/23)
712
713 - Many demo macros added
714
715 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
716
717 - Hillas Calculation added
718
719 - Standard image cleaning available
720
721 - MReadTree is now able to handle more than one file
722 (Remark: of the same structure)
723
724 - Now we are able to display events in a first version of the
725 Camera event display. To do this we must run the macro
726 "macros/readCT1.C" to read data from CT1.
727
728
729
730 *** Version 0.2 (2001/01/24)
731
732 - First Implementation of a Gui to read the raw data. Start the
733 gui with the command mars.
734
735
736
737 *** Version 0.1 (2000/12/20)
738
739 - First official release 0.1
740
741 - Changes:
742
743 + changed calling style of MRawPixelIterator from do...while to
744 while-loop
745
Note: See TracBrowser for help on using the repository browser.