-*-*- END -*-*- *** Version - Reference lines in the display can be read from conf. file - Interlaced cal. events are now handled correctly by callisto. - High-Gain vs. Low-Gain calibration constants can be calculated (but not yet applied) in callisto. - class MJCalibTest can be called by callisto - interpolated pointing positions are now in Tree "Events" after calibration - callisto can now run with three data types: rawdata, rootdata, MC - added two classes mreport/MReportStarguider.cc and mreport/MReportStarguider.h for implementing starguider-data - For implementing the starguider-data the class MReportStarguider has been added to mreport/ReportLinkDef.h and to mreport/Makefile - added two containers ( MReportStarguider, MTimeStarguider ) and added MReportStarguider to the list in merpp.cc - Fixed bug in MHHadronness.cc which made that the displayed Q-factor values were lower than they should. This was more visible for high energy (Size) events. - Made MExtractTimeAndChargeDigital Filter the default for callisto - added a new loop to callisto to support the correct extraction of the pedestal and pedestal rms through the signal extractor - added class to perform fourier tranformation of a hexagonal structure (MHexagonalFT) - added class to perform fourier tranformation of a hexagonal structure in a tasklist (MHexagonalFTCalc) example: hft.C - added class to enhance the MCerPhotEvt from the Magic camera geometry MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only small pixels, example: extendcam.C - added possibility to write data to memory (TTree) using MReadTree - added possibility to read a TTree stored only in memory by MReadTree - new classes to deal with the interleaved calibration events: MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern - implemented filters to callisto to skip calibration events - changed callisto to calculate three kinds of pedestals and pedestal rms: + fundamental pedestal (MPedPhotFundamental): extracted directly from the slices by statistics + pedestal from extractor (MPedPhotFromExtractor): extracted with the signal extractor without randomization + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted with the signal extractor with randomization (extraction window is randomly fixed) The thir kind of pedestal is not yet implemented (for speed reasons) as long as nobody really needs it: + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm): extracted with the signal extractor with randomization - implemented data reduction in calibrated data by reducing the precision of the stored floating point values (pedestal, rms and signal) to roughly 0.5% - fixed showplot to make file format conversion (eg. converting a status display stored in a root file into a postscript file) in batch mode possible: showplot -b --save-as-ps[=outfile.ps] infile.root *** Version 0.8.6 (2004/10/05) - New combined signal and time extractor MExtractTimeAndChargeDigitalFilter - The Report for the trigger section in the CC run summary has been updated, and now the IPRs (Individual Pixel Rates) are available. - new macros for database interaction: filldotrun.C, filldotrbk.C - added new program which can convert colored output which was redirected into a file back into colored text (for example to display it with more): showlog - added new program to display an MStatusArray of plots (stored with MStatusDisplay) from a file: showplot - Added support for Sequences (MSequence). Sequences are blocks of run files containing the same calibration and belonging to the same source - Added a new task (MTaskEnv) which can be used in setup files to switch between different tasks (for example to choose a signal extractor) - Implemented automatic file splitting in MWriteRootFile - After image cleaning an island index is assigned to all used pixels. The index corresponds to the order of the islands in size. - added a cleaning which takes signal height _and_ arrival time into account: probability cleaning (for more details see MImgCleanStd) - added a cleaning which takes takes the absolute number of photons times the area ratio as cleaning level (for more details see MImgCleanStd) - Changed calculation of image parameters such, that it can be done for all used pixels or the pixels with a defined island index only - implemented new image parameters displaying the number of islands, saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar) - event display in executable changed to support also calibrated files (done with MJCalibrateSignal) - added program doing the calibration and the signal extraction and signal calibration: callisto Most part of the setup is done by a resource file: callisto.rc - implemented support for pixels with negative IDs (Raw file format version 4) - implemented an new option in merpp (--auto-time) to get the time range for cc and/or caco data from the run header of the raw data - New star-program (star and MJStar). Taking calibrated data from callisto/MJCalibrateSignal as input. The setup is done through a resource file: star.rc - Added possibility to setup the eventloop in the mars-executable Camera Display by a resource file: mars.rc - The the mars-executable Camera Display can now also read calibrated data files written by callisto/MJCalibrateSignal - Added a new class which can calculate the source position in the camera from a pointing model known to be correct and the pointing model used for observations (MSrcPosFromModel) - added a new version of the class calculating the effective on-time MHEffectiveOnTime. It unifies the old classes MHEffOnTime, MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and MHTimeDiffTheta. - added the possibility to count how often a signal is above (or below) a certain threshold in MHCamEvent and MHCamEventRot (this can replace MHTriggerLvl0) - added ore convinient ways to set the axis-titles of your histograms in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime, MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot *** Version 0.8.5 (2004/08/06) - new Signal Extractors: MExtractFixedWindowSpline and MExtractAmplitudeSpline - implementes interleave in merpp to be able to merpp parts of a file - implemented force-functionality to merpp - star display to display star catalogs (MAstroCatalog) - star display to 'mirror' stars to the camera (MAstroCamera) - implemented a new cleaning option which allows cleaning scaled with the real ratio of the rms depending on the pixel size, not only the square root of the pixelsize (MImgCleanStd, MCameraData) - removed obsolete MBlind* classes - Signal extractor taking the AB flag into account implemented (this makes an odd number of slices for signal extraction possible (MExtractSignalABcorr) - implemented a class extracting the pedestal from the raw-data (events) itself using empty lo-gain (MpedCalcFromLoGain) - Added mean values to MPedPhotCam - Added Makefile for Darwin (this OS is NOT officially supported!) *** Version 0.8.4 (2004/04/19) - new fast arrival time extractor using cubic splines: MExtractTimeFastSpline - implementes multi-argument support in MDataChain ("pow(a, b)") - implemented double reference support in MDataChain ("MCameraLV.fPowerSupplyA.fVoltagePos5V") - added support in MF for expressiond like "MHillas.fWidth<2*2 - added a new classes storing the pedestals in units of photons: MPedPhotPix, MPedPhotCam - added support for DC current files from the camera control - added support for start- and stop-time when merpping report files - added MReportCC storing the weather data from the CC-REPORT - added class to fill trainings and test matrices (MTFillMatrix) - added a filter performing a software trigger (MFSoftwareTrigger) - Added classes to perform parts of the standard analysis (Jobs): + MJPedestals + MJCalibration + MJExtractSignal Note: All of them are preliminary! - Added Iterator to iterate over files giving only the run-number - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot the evolution of a sector vs time *** Version 0.8.3 (2003/12/05) - adapted Random Forest classes to allow the use with MC multi-telescope files which can be produced with the coming camera version 0.7. - added classes to read and interprete central control report files (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...) - enhanced merpp (the executable) to support .raw and .rep files. - added classes for light calibration (MCalibration* and MHCalibration*) by Markus Gaug. Further work has to be and will be done soon. - Added a preliminary 'synchronizer' (MReadReports) which will replace MReadMarsFile as soon as it is finished. - Added a tutorial macro demonstrating how report files are merpped and how they can be read from the root file in the correct order of time (readrep.C) - Added a generalized histogram (similar to MH3) called MVsTime which allows to plot variables (or rules - MDataChain - of variables) vs time. For an example have a look at tempvstime.C. - Changed the name of the event trees: + Events --> Events + PedEvents --> Pedestals + CalEvents --> Calibration - changed name of MTime in the event trees from MRawEvtTime to MTime - added displaying the sector indices to the mars event display - Magic Online Analysis (MOnA) implemented in a first version (see mona.cc, MOnlineDump and MOnlineDisplay) - added classes to calculate event rate (preliminary: MEventRateCalc, MEventRate) - added new executable 'readdaq' to read *.raw files from the DAQ directly - added classes dealing with the telescope pointing position (MPointing*) - implemented the 'final' Mars time stamp based on some experiences with the new 'Synchonizer' *** Version 0.8.2 (2003/11/10) - accelerated standard analysis by a factor of 6-8 ... + doing precalculations in MGeomCam for the pixel area ratio + creating a look up table for the single pixels in MCerPhotEvt - added task to calculates weights in case you want to 'change' the energy spectrum of a monte carlo file (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya) - added a new executable star which implements the star.C macro as precompiled executable. Currently a flexible setup is not possible, but a 'input card' setup will follow. - Starting to implement Multi-Telescope-Support based on the upcomming camera version 0.7. The base for a general support is implemented and the star-functionality is proven to work. - Replaced Event-Display in and Camera-Display in the Mars GUI executable by a more convinient display base on MStatusDisplay. - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc) *** Version 0.8.1 (2003/10/20) - added signal subtraction for pure on data by means of fitting the background in the off region or by performing a combined signal/background fit. Provides necessary histograms for obtaining energy spectra and a light curve. - added classes to perform and study the selection of the 2nd Level Trigger on MC data (example in triglvl2.C macro) - added pedestal calculation - implemented "democratic cleaning" (tail cut value proportional to pixel area) according to Wolfgang's suggestion. - added Sigmabar treatment (calculation and basic histogramming) - added basic routines to apply padding - added first implementation of MARS-based source visibility plotter (needs to be linked against slalib, preliminary version) - enhanced functionality of data chains: random numbers, conversion functions and access to MHMatrix objects - fixed some bugs in the CT1 Preproc file reader, which gave wrong numbers under certain circumstances (runs with 0 events included) - fixed a bug in the general filter MF (didn't work on some systems at all) - fixed a bug in chaining files, which caused the analysis to crash or ignore files - implemented more geometry classes describing the parameters used to simulate the PMT camera - added new Monte Carlo classes containing the setup of the different programs in the MC chain. - added a (preliminary) general task to evaluate chi-square of a given parameter in an eventloop. - first implementation of a container describing the observatory location (Long, Lat, etc) - added Random Forest - method for g/h-separation - made compatible with the latest PRO version of root (3.04/02 and 3.05/07) (this means, that it is compiling, but not yet fully tested) - added a new status display which can show the present status of histograms while an eventloop is running (MStatusDisplay, an example can be found at status.C) - reorganized directories: classes describing the image --> mimage classes containing Monte Carlo Histograms --> mhistmc classes for Random Forest method --> mranforest - added (event-)weights to fill histograms - colors in logging output to screen - changes to the Image Parameter declaration: + moved fConc, fConc1 from MHillasSrc to MNewImagePar + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar + MHillasExt now derives from MParContainer instead of MHillas --> Files written with the old definition are more or less unreadable - reading of reflector files - display data from reflector files in the camera - implemented currents (and display them in the camera) - logarithmic scale in camera - added class to iterate through directory contents (MDirIter) *** Version 0.8 (2002/11/18) - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C) - corrected 48(!) wrong entries in the Next Neighbor table of the Magic Camera (all in the inner part of the outer ring, mostly missing a single NN) - Fixed a bug in the table describing the Next Neighbours of the CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't have any neighbour) - changed trigrate.C: now it calculates the pure NSB triggers from a camera file (generated with no showers), so there is no need to introduce them by hand in the BgR array (for more details please ask Abelardo) - added MHHadronness (and MHadronness) as a general facility to evaluate the quality of a gamma-hadron seperation method - changed MWriteAsciiFile to accept rules (MDataChain) - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule must be replaced by calles to MWriteAsciiFile::AddColumn and MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly changed. - Implemented generalized event-matrices (one row per event) (MHMatrix) - implemented the one dimensional composite probabilities (MHCompProb, MCompProbCalc, comprob.C) - implemented the Multidimensional Distances (Next Neighbours, Kernel) (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix) - Added a camera display displaying the pixel numbers to the event display gui. - Added Monte Carlo Informations to event display gui - Changed the camera display to display the pixel numbering - Added three buttons to the camera display to change the palette - Added the number of used and core pixels after image cleaning to MHillas - Changed the algorithm used in MHillas according to TDAS 02-03 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°] - Changed the algorithm used in MHillasSrc according to TDAS 02-03 - Added fCosDeltaAlpha to MHillasSrc - The numbers of photons used to calculate fConc and fConc1 in MHillasExt are now scaled with the pixel size, so that one get a four times smaller value for the bigger pixels in the outer ring. - added new task to smooth the camera contents (MCameraSmooth) - added possibility to use interpolated pixel values for blind pixels instead of removing it completely from the analysis - Implemented the possibility to save the whole eventloop with its setup to a file. This information can be read and from it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write and MEvtLoop::MakeMacro. If you find something not working, please report - this stuff is still in a beta phase. - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the file having crab starfield, but also for all following files - fixed - MTaskList::PrintStatistics can now be instructud to print also the title, too: use PrintStatistics(0, kTRUE) - Changed the image cleaning so that pixels with to many 'used' neighbors are left used (to get rid of 'holes' in events) - Introduced more output to the camera displays - Added an array of histograms (eg one hist per run), MHArray - Added a _preliminary_ version of the reader for CT1 PreProc files (MCT1ReadPreProc) - Fixed the error calculation of MHMCollectionArea and MHMcIntRate (thanks to Raquel) - added the first energy estimator (MEnergyEstParam, estimate.C, estfit.C) using a parametrization - Added some new Monte Carlo paremeter containers used to store setup information from the MC chain (MMcConfigRunHeader, MMcCorsikaRunHeader, MGeomPMT, MGeomMirror) *** Version 0.7 (2002/04/30) - added a bugfix to MCerPhotCalc. In older camera versions (<=40) the pedestal mean value was saved incorrectly. For files from this versions we substract 0.5 from the pedestal mean. WARNING: This may effect your results, so don't wonder... - First implementation of an algorithm using only triggered events for the collection area calculation - Ascii Output can now also be used for parameter containers which doesn't overload MParCointainer::AsciiWrite - The Ascii Output is now also capable of writing single data members of one container - You are now able to change the order of the values written to the ascii file - You can now specify a conversion factor for each data member written to an ascii file. This may be usefull to change the units of the data member (eg. degrees instead of millimeters in case of the hillas parameters) - Replaced old MHillas by a new structure which allows you to extend the parameters stored in MHillas very easily: see MHillas and MHillasExt - Added classes to handle source dependancy of image parameters: see MHillasSrc - Added container (MBinning) to have a standard input for the binning in different histograms (eg. the Energy bins should be the same in all histograms) - Changed Hillas histograms from mm to deg - Added the flexible binning to the hillas histograms - Added a filter for the alpha parameter (MFAlpha) - It is now possible to write single data members of a class object to an output stream instead of the whole container only - Added a generalized filter for a data member: MFDataMember filter("MHillas.fWidth", '<', 0.5); - Added a generalized Filter parser for more difficult filter rules MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5"); - Added new Monte Carlo histograms: MHMcEnergyImpact and MHMcEfficiency - Added many new histograms needed for the flux calculation. - Added a generalized histograms which can fill and show up to three data members in either a one-, two- or three-dimensional histogram, eg: MH3 mh3("MHillas.fWidth", "MHillas.fLength"); - Added: * calculation of as a function of Theta (MHThetabarTheta) * calculation of as a function of time (MHThetabarTime) they are needed in the flux calculation in order to select for a given bin in Theta (or time) the appropriate effective collection area, which is assumed to be given as a function of Theta and the true energy - Added calculation of the migration matrix in the energy (MHMcEnergyMigration): the migration matrix describes the migration from the true (E_true) to the estimated energy (E_est); it is needed to determine the distribution of E_true from the measured distribution of E_est by unfolding - changed the color palette in the camera display to DeapSea. *** Version 0.6 (2002/01/15) - Introduce the option of disable pixels (MBlindPixels and MBlindPixelCalc) for the analysis (eg MHillasCalc) to be able to deal with Star Field NSB. - Fixed a bug in the pedestals substraction - Introduced verbosity levels - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too. - Fixed several bugs in MFTriggerLvl1 which caused to filter not to work correctly (thanks to Abelardo) - Introduced correct treatment of the diffuse Night Sky Background and NSB (MMcPedestalNSB) - Corrected treatment of the electronic noise (MMcPedestalCopy) - Introduced MMcRunHeaders which contains monte carlo run informations - Added a 'Print'-Task (MPrint) which calls the Print function of a parameter container for each event - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C - changes to be more efficient with root 3.02/06 - root 3.02/06 fixes: + the memory leak when reading MRawEvtData + loosing more time than necessary to update the progress bar - MWriteAsciiFile is now capable of writing more than one container in a line. For example: To be able to write Monte Carlo and Hillas values (energy and alpha) in one line. *** Version 0.5 (2001/11/06) - Added new GUI functionality (Analysis) - Added a camera display to be able to display events in the camera together with the calculated hillas ellipse - Added a 'Clone'-Task (MClone) which can clone a parameter container object at any state of the analysis, so that the output are several states - Fixed a bug in the collection area error calculation (Thanks to Ciro and Abelardo) - Fixed a bug which causes merpp to crash in some environments - Implemented auto enabling scheme for Branches to speed up reading a lot (see MReadTree and MTask) - Fixed a bug in the Histogram classes which caused histograms to be written to a file by MWriteRootFile without request - changed the object I/O from the old stylish root I/O to the new 'auto evolution scheme' This was done only for classes which are not yet used in Monte Carlo files, so that these files are still readable. - Added support for a progress bar in MEvtLoop and MReadTree (see the Analysis Window in Mars for an example) - Fixed a bug in the package creation which disturbed the conversion between a mars version unpacked from a tar file and the repository. - Changed the code to writer merpped (converted into root format) raw files, to get faster (around 10%) *** Version 0.4 (2001/09/20) - This release is made to compile on a root version >= 3.00 - Fixed a bug which causes MReadTree to read the first file only - Added a task to compute the trigger rate (MMcTriggerRateCalc) - Added a task to write a container to an Ascii file (MWriteAsciiFile) - Added a task to write several container to a root file (MWriteRootFile) - Added calculation of the Enegry Threshold (MMcThresholdCalc) - Added calculation of the collection area (MMcCollectionAreaCalc) - fixed some bugs in the Hillas calculation - added filters to be able to control the task execution dependent on a parameter (for example: the number of level 1 triggers in a MC-file) *** Version 0.3 (2001/04/23) - Many demo macros added - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile) - Hillas Calculation added - Standard image cleaning available - MReadTree is now able to handle more than one file (Remark: of the same structure) - Now we are able to display events in a first version of the Camera event display. To do this we must run the macro "macros/readCT1.C" to read data from CT1. *** Version 0.2 (2001/01/24) - First Implementation of a Gui to read the raw data. Start the gui with the command mars. *** Version 0.1 (2000/12/20) - First official release 0.1 - Changes: + changed calling style of MRawPixelIterator from do...while to while-loop