source: trunk/MagicSoft/Mars/NEWS@ 5825

Last change on this file since 5825 was 5796, checked in by riegel, 20 years ago
*** empty log message ***
File size: 26.8 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - added two classes mreport/MReportStarguider.cc and
5 mreport/MReportStarguider.h for implementing starguider-data
6
7 - For implementing the starguider-data the class MReportStarguider has
8 been added to mreport/ReportLinkDef.h and to mreport/Makefile
9
10 - added two containers ( MReportStarguider, MTimeStarguider ) and
11 added MReportStarguider to the list in merpp.cc
12
13 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
14 values were lower than they should. This was more visible for high
15 energy (Size) events.
16
17 - Made MExtractTimeAndChargeDigital Filter the default for callisto
18
19 - added a new loop to callisto to support the correct extraction of
20 the pedestal and pedestal rms through the signal extractor
21
22 - added class to perform fourier tranformation of a hexagonal structure
23 (MHexagonalFT)
24
25 - added class to perform fourier tranformation of a hexagonal structure
26 in a tasklist (MHexagonalFTCalc) example: hft.C
27
28 - added class to enhance the MCerPhotEvt from the Magic camera geometry
29 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
30 small pixels, example: extendcam.C
31
32 - added possibility to write data to memory (TTree) using MReadTree
33
34 - added possibility to read a TTree stored only in memory by MReadTree
35
36 - new classes to deal with the interleaved calibration events:
37 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
38
39 - changed callisto to calculate two kinds of pedestals and pedestal rms:
40 + fundamental pedestal (MPedPhotFundamental): extracted directly from
41 the slices by statistics
42 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
43 signal extractor without randomization
44 The thir kind of pedestal is not yet implemented (for speed reasons) as
45 long as nobody really needs it:
46 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
47 extracted with the signal extractor with randomization
48
49
50
51 *** Version 0.8.6 (2004/10/05)
52
53 - New combined signal and time extractor
54 MExtractTimeAndChargeDigitalFilter
55
56 - The Report for the trigger section in the CC run summary has been
57 updated, and now the IPRs (Individual Pixel Rates) are available.
58
59 - new macros for database interaction: filldotrun.C, filldotrbk.C
60
61 - added new program which can convert colored output which was redirected
62 into a file back into colored text (for example to display it with
63 more): showlog
64
65 - added new program to display an MStatusArray of plots (stored with
66 MStatusDisplay) from a file: showplot
67
68 - Added support for Sequences (MSequence). Sequences are blocks of run
69 files containing the same calibration and belonging to the same
70 source
71
72 - Added a new task (MTaskEnv) which can be used in setup files to switch
73 between different tasks (for example to choose a signal extractor)
74
75 - Implemented automatic file splitting in MWriteRootFile
76
77 - After image cleaning an island index is assigned to all used pixels.
78 The index corresponds to the order of the islands in size.
79
80 - added a cleaning which takes signal height _and_ arrival time into
81 account: probability cleaning (for more details see MImgCleanStd)
82
83 - added a cleaning which takes takes the absolute number of photons
84 times the area ratio as cleaning level
85 (for more details see MImgCleanStd)
86
87 - Changed calculation of image parameters such, that it can be done
88 for all used pixels or the pixels with a defined island index only
89
90 - implemented new image parameters displaying the number of islands,
91 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
92
93 - event display in executable changed to support also calibrated files
94 (done with MJCalibrateSignal)
95
96 - added program doing the calibration and the signal extraction
97 and signal calibration: callisto Most part of the setup is done
98 by a resource file: callisto.rc
99
100 - implemented support for pixels with negative IDs (Raw file format
101 version 4)
102
103 - implemented an new option in merpp (--auto-time) to get the time
104 range for cc and/or caco data from the run header of the raw data
105
106 - New star-program (star and MJStar). Taking calibrated data from
107 callisto/MJCalibrateSignal as input. The setup is done through
108 a resource file: star.rc
109
110 - Added possibility to setup the eventloop in the mars-executable
111 Camera Display by a resource file: mars.rc
112
113 - The the mars-executable Camera Display can now also read
114 calibrated data files written by callisto/MJCalibrateSignal
115
116 - Added a new class which can calculate the source position in
117 the camera from a pointing model known to be correct and
118 the pointing model used for observations (MSrcPosFromModel)
119
120 - added a new version of the class calculating the effective on-time
121 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
122 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
123 MHTimeDiffTheta.
124
125 - added the possibility to count how often a signal is above (or
126 below) a certain threshold in MHCamEvent and MHCamEventRot (this
127 can replace MHTriggerLvl0)
128
129 - added ore convinient ways to set the axis-titles of your histograms
130 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
131 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
132
133
134
135 *** Version 0.8.5 (2004/08/06)
136
137 - new Signal Extractors: MExtractFixedWindowSpline
138 and MExtractAmplitudeSpline
139
140 - implementes interleave in merpp to be able to merpp parts of a file
141
142 - implemented force-functionality to merpp
143
144 - star display to display star catalogs (MAstroCatalog)
145
146 - star display to 'mirror' stars to the camera (MAstroCamera)
147
148 - implemented a new cleaning option which allows cleaning scaled with
149 the real ratio of the rms depending on the pixel size, not only the
150 square root of the pixelsize (MImgCleanStd, MCameraData)
151
152 - removed obsolete MBlind* classes
153
154 - Signal extractor taking the AB flag into account implemented (this makes
155 an odd number of slices for signal extraction possible
156 (MExtractSignalABcorr)
157
158 - implemented a class extracting the pedestal from the raw-data (events)
159 itself using empty lo-gain (MpedCalcFromLoGain)
160
161 - Added mean values to MPedPhotCam
162
163 - Added Makefile for Darwin (this OS is NOT officially supported!)
164
165
166
167 *** Version 0.8.4 (2004/04/19)
168
169 - new fast arrival time extractor using cubic splines:
170 MExtractTimeFastSpline
171
172 - implementes multi-argument support in MDataChain
173 ("pow(a, b)")
174
175 - implemented double reference support in MDataChain
176 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
177
178 - added support in MF for expressiond like
179 "MHillas.fWidth<2*<MHillas.fLength"
180
181 - MDataChain is now able to support variables like [0], [1], ...
182 which can be used in fit functions as parameters. The interface
183 is implemented through the new virtual function
184 MParContainer::SetVariables
185
186 - added new class MArrivalTimeCam/MArrivalTimePix:
187 Storage containers to hold the ArrivalTime of the camera/pixel
188
189 - added new classes for the calibration of relative arrival times:
190 MCalibrationRelTimePix and MCalibrationRelTimeCam
191
192 - added new classes to extract the signal of the blind pixel and the
193 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
194
195 - added new classes for the bad-pixels treatment (MBadPixels*)
196 which are more powerfull than the old ones (MBlindPixel*)
197 and will replace them.
198
199 - added filter against cosmics: MFCosmics
200
201 - added new class MArrivalTimeCalc2:
202 Calculates the arrival time as the signal weighted mean of the time
203 slices in the maximum window
204
205 - added a new macro call pointspreadfucntion.C that fits with a 2D
206 gaussian the DC spot for an star. It gives you the RMS of
207 the PSF and the center of the star, very useful for misspointing
208 studies.
209
210 - added support for multi-telescope camera files. Added classes
211 MStereoCalc and MStereoPar, classes to calculate and store shower
212 parameters calculated from the data of two telescopes, for the MC
213 studies regarding the MAGIC clone.
214
215 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
216 MC data calibrated in photons instead of ADC counts.
217
218 - added three macros to show the calibration and analysis chain of
219 MC data. The macro starmc.C does both calibration and analysis, producing
220 an output containing Hillas parameters for each event. The macro
221 mccalibrate.C does just the calibration and writes out a file containing
222 pixel information in photons instead of FADC data. The macro starmc2.C
223 reads in such a file and produces an output with Hillas parameters.
224
225 - added MPedPhotCalc to compute pedestals in units of photons, see
226 macro pedphotcalc.C
227
228 - added all class to perform the calibration, see macro calibration.C
229
230 - added class MFFT to perform Fast Fourier Transforms
231
232 - added class MSimulatedAnnealing to perform simulated annealing
233 minimizations
234
235 - added new macro bootcampstandardanalysis.C which holds the skeleton
236 of the analysis chain discussed in the december bootcamp.
237
238 - added support for DAQ raw data file format V2
239
240 - implemented an arbitrary time stamp for the events from raw-data
241 files with file version<3. It is calculated from the run number,
242 the date of start and the FADC clock tick from the first module
243
244 - implemented the correct decoding of the event time-stamp
245 coming from the DAQ for raw-data files with file-version>2
246
247 - added a new classes storing the pedestals in units of photons:
248 MPedPhotPix, MPedPhotCam
249
250 - added support for DC current files from the camera control
251
252 - added support for start- and stop-time when merpping report files
253
254 - added MReportCC storing the weather data from the CC-REPORT
255
256 - added class to fill trainings and test matrices (MTFillMatrix)
257
258 - added a filter performing a software trigger (MFSoftwareTrigger)
259
260 - Added classes to perform parts of the standard analysis (Jobs):
261 + MJPedestals
262 + MJCalibration
263 + MJExtractSignal
264 Note: All of them are preliminary!
265
266 - Added Iterator to iterate over files giving only the run-number
267
268 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
269 the evolution of a sector vs time
270
271
272
273 *** Version 0.8.3 (2003/12/05)
274
275 - adapted Random Forest classes to allow the use with MC
276 multi-telescope files which can be produced with the coming
277 camera version 0.7.
278
279 - added classes to read and interprete central control report files
280 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
281
282 - enhanced merpp (the executable) to support .raw and .rep files.
283
284 - added classes for light calibration (MCalibration* and
285 MHCalibration*) by Markus Gaug. Further work has to be and will
286 be done soon.
287
288 - Added a preliminary 'synchronizer' (MReadReports) which will
289 replace MReadMarsFile as soon as it is finished.
290
291 - Added a tutorial macro demonstrating how report files are merpped
292 and how they can be read from the root file in the correct order
293 of time (readrep.C)
294
295 - Added a generalized histogram (similar to MH3) called MVsTime
296 which allows to plot variables (or rules - MDataChain - of
297 variables) vs time. For an example have a look at tempvstime.C.
298
299 - Changed the name of the event trees:
300 + Events --> Events
301 + PedEvents --> Pedestals
302 + CalEvents --> Calibration
303
304 - changed name of MTime in the event trees from MRawEvtTime to MTime
305
306 - added displaying the sector indices to the mars event display
307
308 - Magic Online Analysis (MOnA) implemented in a first version
309 (see mona.cc, MOnlineDump and MOnlineDisplay)
310
311 - added classes to calculate event rate
312 (preliminary: MEventRateCalc, MEventRate)
313
314 - added new executable 'readdaq' to read *.raw files from the DAQ directly
315
316 - added classes dealing with the telescope pointing position (MPointing*)
317
318 - implemented the 'final' Mars time stamp based on some experiences with
319 the new 'Synchonizer'
320
321
322
323 *** Version 0.8.2 (2003/11/10)
324
325 - accelerated standard analysis by a factor of 6-8 ...
326 + doing precalculations in MGeomCam for the pixel area ratio
327 + creating a look up table for the single pixels in MCerPhotEvt
328
329 - added task to calculates weights in case you want to 'change'
330 the energy spectrum of a monte carlo file
331 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
332
333 - added a new executable star which implements the
334 star.C macro as precompiled executable. Currently a flexible
335 setup is not possible, but a 'input card' setup will follow.
336
337 - Starting to implement Multi-Telescope-Support based on the
338 upcomming camera version 0.7. The base for a general support
339 is implemented and the star-functionality is proven to work.
340
341 - Replaced Event-Display in and Camera-Display in the Mars GUI
342 executable by a more convinient display base on MStatusDisplay.
343
344 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
345
346
347
348 *** Version 0.8.1 (2003/10/20)
349
350 - added signal subtraction for pure on data by means of fitting
351 the background in the off region or by performing a combined
352 signal/background fit. Provides necessary histograms for
353 obtaining energy spectra and a light curve.
354
355 - added classes to perform and study the selection of the
356 2nd Level Trigger on MC data (example in triglvl2.C macro)
357
358 - added pedestal calculation
359
360 - implemented "democratic cleaning" (tail cut value proportional
361 to pixel area) according to Wolfgang's suggestion.
362
363 - added Sigmabar treatment (calculation and basic histogramming)
364
365 - added basic routines to apply padding
366
367 - added first implementation of MARS-based source visibility plotter
368 (needs to be linked against slalib, preliminary version)
369
370 - enhanced functionality of data chains: random numbers, conversion
371 functions and access to MHMatrix objects
372
373 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
374 numbers under certain circumstances (runs with 0 events included)
375
376 - fixed a bug in the general filter MF (didn't work on some systems
377 at all)
378
379 - fixed a bug in chaining files, which caused the analysis to crash or
380 ignore files
381
382 - implemented more geometry classes describing the parameters used
383 to simulate the PMT camera
384
385 - added new Monte Carlo classes containing the setup of the different
386 programs in the MC chain.
387
388 - added a (preliminary) general task to evaluate chi-square of a given
389 parameter in an eventloop.
390
391 - first implementation of a container describing the observatory
392 location (Long, Lat, etc)
393
394 - added Random Forest - method for g/h-separation
395
396 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
397 (this means, that it is compiling, but not yet fully tested)
398
399 - added a new status display which can show the present status
400 of histograms while an eventloop is running (MStatusDisplay,
401 an example can be found at status.C)
402
403 - reorganized directories:
404 classes describing the image --> mimage
405 classes containing Monte Carlo Histograms --> mhistmc
406 classes for Random Forest method --> mranforest
407
408 - added (event-)weights to fill histograms
409
410 - colors in logging output to screen
411
412 - changes to the Image Parameter declaration:
413 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
414 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
415 + MHillasExt now derives from MParContainer instead of MHillas
416 --> Files written with the old definition are more or less unreadable
417
418 - reading of reflector files
419
420 - display data from reflector files in the camera
421
422 - implemented currents (and display them in the camera)
423
424 - logarithmic scale in camera
425
426 - added class to iterate through directory contents (MDirIter)
427
428
429
430 *** Version 0.8 (2002/11/18)
431
432 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
433
434 - corrected 48(!) wrong entries in the Next Neighbor table of the
435 Magic Camera (all in the inner part of the outer ring, mostly
436 missing a single NN)
437
438 - Fixed a bug in the table describing the Next Neighbours of the
439 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
440 have any neighbour)
441
442 - changed trigrate.C: now it calculates the pure NSB triggers from
443 a camera file (generated with no showers), so there is no need
444 to introduce them by hand in the BgR array (for more details
445 please ask Abelardo)
446
447 - added MHHadronness (and MHadronness) as a general facility to evaluate
448 the quality of a gamma-hadron seperation method
449
450 - changed MWriteAsciiFile to accept rules (MDataChain)
451
452 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
453 must be replaced by calles to MWriteAsciiFile::AddColumn and
454 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
455 changed.
456
457 - Implemented generalized event-matrices (one row per event)
458 (MHMatrix)
459
460 - implemented the one dimensional composite probabilities
461 (MHCompProb, MCompProbCalc, comprob.C)
462
463 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
464 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
465
466 - Added a camera display displaying the pixel numbers to the
467 event display gui.
468
469 - Added Monte Carlo Informations to event display gui
470
471 - Changed the camera display to display the pixel numbering
472
473 - Added three buttons to the camera display to change the palette
474
475 - Added the number of used and core pixels after image cleaning
476 to MHillas
477
478 - Changed the algorithm used in MHillas according to TDAS 02-03
479
480 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
481
482 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
483
484 - Added fCosDeltaAlpha to MHillasSrc
485
486 - The numbers of photons used to calculate fConc and fConc1 in
487 MHillasExt are now scaled with the pixel size, so that one get
488 a four times smaller value for the bigger pixels in the outer ring.
489
490 - added new task to smooth the camera contents (MCameraSmooth)
491
492 - added possibility to use interpolated pixel values for blind pixels
493 instead of removing it completely from the analysis
494
495 - Implemented the possibility to save the whole eventloop with
496 its setup to a file. This information can be read and from
497 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
498 and MEvtLoop::MakeMacro. If you find something not working, please
499 report - this stuff is still in a beta phase.
500
501 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
502 file having crab starfield, but also for all following files - fixed
503
504 - MTaskList::PrintStatistics can now be instructud to print also the
505 title, too: use PrintStatistics(0, kTRUE)
506
507 - Changed the image cleaning so that pixels with to many 'used'
508 neighbors are left used (to get rid of 'holes' in events)
509
510 - Introduced more output to the camera displays
511
512 - Added an array of histograms (eg one hist per run), MHArray
513
514 - Added a _preliminary_ version of the reader for CT1 PreProc files
515 (MCT1ReadPreProc)
516
517 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
518 (thanks to Raquel)
519
520 - added the first energy estimator (MEnergyEstParam, estimate.C,
521 estfit.C) using a parametrization
522
523 - Added some new Monte Carlo paremeter containers used to store
524 setup information from the MC chain (MMcConfigRunHeader,
525 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
526
527
528
529 *** Version 0.7 (2002/04/30)
530
531 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
532 the pedestal mean value was saved incorrectly. For files from
533 this versions we substract 0.5 from the pedestal mean.
534 WARNING: This may effect your results, so don't wonder...
535
536 - First implementation of an algorithm using only triggered events
537 for the collection area calculation
538
539 - Ascii Output can now also be used for parameter containers which
540 doesn't overload MParCointainer::AsciiWrite
541
542 - The Ascii Output is now also capable of writing single data members
543 of one container
544
545 - You are now able to change the order of the values written to the
546 ascii file
547
548 - You can now specify a conversion factor for each data member written
549 to an ascii file. This may be usefull to change the units of the
550 data member (eg. degrees instead of millimeters in case of the
551 hillas parameters)
552
553 - Replaced old MHillas by a new structure which allows you to extend
554 the parameters stored in MHillas very easily:
555 see MHillas and MHillasExt
556
557 - Added classes to handle source dependancy of image parameters:
558 see MHillasSrc
559
560 - Added container (MBinning) to have a standard input for the binning
561 in different histograms (eg. the Energy bins should be the same in
562 all histograms)
563
564 - Changed Hillas histograms from mm to deg
565
566 - Added the flexible binning to the hillas histograms
567
568 - Added a filter for the alpha parameter (MFAlpha)
569
570 - It is now possible to write single data members of a class object to
571 an output stream instead of the whole container only
572
573 - Added a generalized filter for a data member:
574 MFDataMember filter("MHillas.fWidth", '<', 0.5);
575
576 - Added a generalized Filter parser for more difficult filter rules
577 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
578
579 - Added new Monte Carlo histograms:
580 MHMcEnergyImpact and MHMcEfficiency
581
582 - Added many new histograms needed for the flux calculation.
583
584 - Added a generalized histograms which can fill and show up to three
585 data members in either a one-, two- or three-dimensional histogram, eg:
586 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
587
588 - Added:
589 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
590 * calculation of <Theta> as a function of time (MHThetabarTime)
591 they are needed in the flux calculation in
592 order to select for a given bin in Theta (or time) the appropriate
593 effective collection area, which is assumed to be given as a function
594 of Theta and the true energy
595
596 - Added calculation of the migration matrix in the energy
597 (MHMcEnergyMigration):
598 the migration matrix describes the migration from the true (E_true)
599 to the estimated energy (E_est); it is needed to determine the
600 distribution of E_true from the measured distribution of E_est
601 by unfolding
602
603 - changed the color palette in the camera display to DeapSea.
604
605
606
607 *** Version 0.6 (2002/01/15)
608
609 - Introduce the option of disable pixels (MBlindPixels and
610 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
611 able to deal with Star Field NSB.
612
613 - Fixed a bug in the pedestals substraction
614
615 - Introduced verbosity levels
616
617 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
618
619 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
620 work correctly (thanks to Abelardo)
621
622 - Introduced correct treatment of the diffuse Night Sky Background
623 and NSB (MMcPedestalNSB)
624
625 - Corrected treatment of the electronic noise (MMcPedestalCopy)
626
627 - Introduced MMcRunHeaders which contains monte carlo run informations
628
629 - Added a 'Print'-Task (MPrint) which calls the Print function
630 of a parameter container for each event
631
632 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
633
634 - changes to be more efficient with root 3.02/06
635
636 - root 3.02/06 fixes:
637 + the memory leak when reading MRawEvtData
638 + loosing more time than necessary to update the progress bar
639
640 - MWriteAsciiFile is now capable of writing more than one container
641 in a line. For example: To be able to write Monte Carlo and
642 Hillas values (energy and alpha) in one line.
643
644
645
646 *** Version 0.5 (2001/11/06)
647
648 - Added new GUI functionality (Analysis)
649
650 - Added a camera display to be able to display events in the camera
651 together with the calculated hillas ellipse
652
653 - Added a 'Clone'-Task (MClone) which can clone a parameter container
654 object at any state of the analysis, so that the output are several
655 states
656
657 - Fixed a bug in the collection area error calculation
658 (Thanks to Ciro and Abelardo)
659
660 - Fixed a bug which causes merpp to crash in some environments
661
662 - Implemented auto enabling scheme for Branches to speed up reading
663 a lot (see MReadTree and MTask)
664
665 - Fixed a bug in the Histogram classes which caused histograms to
666 be written to a file by MWriteRootFile without request
667
668 - changed the object I/O from the old stylish root I/O to the new
669 'auto evolution scheme' This was done only for classes which are not
670 yet used in Monte Carlo files, so that these files are still readable.
671
672 - Added support for a progress bar in MEvtLoop and MReadTree
673 (see the Analysis Window in Mars for an example)
674
675 - Fixed a bug in the package creation which disturbed the conversion
676 between a mars version unpacked from a tar file and the repository.
677
678 - Changed the code to writer merpped (converted into root format)
679 raw files, to get faster (around 10%)
680
681
682
683 *** Version 0.4 (2001/09/20)
684
685 - This release is made to compile on a root version >= 3.00
686
687 - Fixed a bug which causes MReadTree to read the first file only
688
689 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
690
691 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
692
693 - Added a task to write several container to a root file (MWriteRootFile)
694
695 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
696
697 - Added calculation of the collection area (MMcCollectionAreaCalc)
698
699 - fixed some bugs in the Hillas calculation
700
701 - added filters to be able to control the task execution dependent on
702 a parameter (for example: the number of level 1 triggers in a MC-file)
703
704
705
706 *** Version 0.3 (2001/04/23)
707
708 - Many demo macros added
709
710 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
711
712 - Hillas Calculation added
713
714 - Standard image cleaning available
715
716 - MReadTree is now able to handle more than one file
717 (Remark: of the same structure)
718
719 - Now we are able to display events in a first version of the
720 Camera event display. To do this we must run the macro
721 "macros/readCT1.C" to read data from CT1.
722
723
724
725 *** Version 0.2 (2001/01/24)
726
727 - First Implementation of a Gui to read the raw data. Start the
728 gui with the command mars.
729
730
731
732 *** Version 0.1 (2000/12/20)
733
734 - First official release 0.1
735
736 - Changes:
737
738 + changed calling style of MRawPixelIterator from do...while to
739 while-loop
740
Note: See TracBrowser for help on using the repository browser.