source: trunk/MagicSoft/Mars/NEWS@ 6206

Last change on this file since 6206 was 6193, checked in by gaug, 20 years ago
*** empty log message ***
File size: 27.8 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - Reference lines in the display can be read from conf. file
5
6 - Interlaced cal. events are now handled correctly by callisto.
7
8 - High-Gain vs. Low-Gain calibration constants can be calculated (but not
9 yet applied) in callisto.
10
11 - class MJCalibTest can be called by callisto
12
13 - interpolated pointing positions are now in Tree "Events" after calibration
14
15 - callisto can now run with three data types: rawdata, rootdata, MC
16
17 - added two classes mreport/MReportStarguider.cc and
18 mreport/MReportStarguider.h for implementing starguider-data
19
20 - For implementing the starguider-data the class MReportStarguider has
21 been added to mreport/ReportLinkDef.h and to mreport/Makefile
22
23 - added two containers ( MReportStarguider, MTimeStarguider ) and
24 added MReportStarguider to the list in merpp.cc
25
26 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
27 values were lower than they should. This was more visible for high
28 energy (Size) events.
29
30 - Made MExtractTimeAndChargeDigital Filter the default for callisto
31
32 - added a new loop to callisto to support the correct extraction of
33 the pedestal and pedestal rms through the signal extractor
34
35 - added class to perform fourier tranformation of a hexagonal structure
36 (MHexagonalFT)
37
38 - added class to perform fourier tranformation of a hexagonal structure
39 in a tasklist (MHexagonalFTCalc) example: hft.C
40
41 - added class to enhance the MCerPhotEvt from the Magic camera geometry
42 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
43 small pixels, example: extendcam.C
44
45 - added possibility to write data to memory (TTree) using MReadTree
46
47 - added possibility to read a TTree stored only in memory by MReadTree
48
49 - new classes to deal with the interleaved calibration events:
50 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
51
52 - implemented filters to callisto to skip calibration events
53
54 - changed callisto to calculate three kinds of pedestals and pedestal rms:
55 + fundamental pedestal (MPedPhotFundamental): extracted directly from
56 the slices by statistics
57 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
58 signal extractor without randomization
59 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
60 with the signal extractor with randomization (extraction window is
61 randomly fixed)
62 The thir kind of pedestal is not yet implemented (for speed reasons) as
63 long as nobody really needs it:
64 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
65 extracted with the signal extractor with randomization
66
67 - implemented data reduction in calibrated data by reducing the precision
68 of the stored floating point values (pedestal, rms and signal) to
69 roughly 0.5%
70
71 - fixed showplot to make file format conversion (eg. converting a
72 status display stored in a root file into a postscript file) in
73 batch mode possible:
74 showplot -b --save-as-ps[=outfile.ps] infile.root
75
76
77
78 *** Version 0.8.6 (2004/10/05)
79
80 - New combined signal and time extractor
81 MExtractTimeAndChargeDigitalFilter
82
83 - The Report for the trigger section in the CC run summary has been
84 updated, and now the IPRs (Individual Pixel Rates) are available.
85
86 - new macros for database interaction: filldotrun.C, filldotrbk.C
87
88 - added new program which can convert colored output which was redirected
89 into a file back into colored text (for example to display it with
90 more): showlog
91
92 - added new program to display an MStatusArray of plots (stored with
93 MStatusDisplay) from a file: showplot
94
95 - Added support for Sequences (MSequence). Sequences are blocks of run
96 files containing the same calibration and belonging to the same
97 source
98
99 - Added a new task (MTaskEnv) which can be used in setup files to switch
100 between different tasks (for example to choose a signal extractor)
101
102 - Implemented automatic file splitting in MWriteRootFile
103
104 - After image cleaning an island index is assigned to all used pixels.
105 The index corresponds to the order of the islands in size.
106
107 - added a cleaning which takes signal height _and_ arrival time into
108 account: probability cleaning (for more details see MImgCleanStd)
109
110 - added a cleaning which takes takes the absolute number of photons
111 times the area ratio as cleaning level
112 (for more details see MImgCleanStd)
113
114 - Changed calculation of image parameters such, that it can be done
115 for all used pixels or the pixels with a defined island index only
116
117 - implemented new image parameters displaying the number of islands,
118 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
119
120 - event display in executable changed to support also calibrated files
121 (done with MJCalibrateSignal)
122
123 - added program doing the calibration and the signal extraction
124 and signal calibration: callisto Most part of the setup is done
125 by a resource file: callisto.rc
126
127 - implemented support for pixels with negative IDs (Raw file format
128 version 4)
129
130 - implemented an new option in merpp (--auto-time) to get the time
131 range for cc and/or caco data from the run header of the raw data
132
133 - New star-program (star and MJStar). Taking calibrated data from
134 callisto/MJCalibrateSignal as input. The setup is done through
135 a resource file: star.rc
136
137 - Added possibility to setup the eventloop in the mars-executable
138 Camera Display by a resource file: mars.rc
139
140 - The the mars-executable Camera Display can now also read
141 calibrated data files written by callisto/MJCalibrateSignal
142
143 - Added a new class which can calculate the source position in
144 the camera from a pointing model known to be correct and
145 the pointing model used for observations (MSrcPosFromModel)
146
147 - added a new version of the class calculating the effective on-time
148 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
149 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
150 MHTimeDiffTheta.
151
152 - added the possibility to count how often a signal is above (or
153 below) a certain threshold in MHCamEvent and MHCamEventRot (this
154 can replace MHTriggerLvl0)
155
156 - added ore convinient ways to set the axis-titles of your histograms
157 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
158 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
159
160
161
162 *** Version 0.8.5 (2004/08/06)
163
164 - new Signal Extractors: MExtractFixedWindowSpline
165 and MExtractAmplitudeSpline
166
167 - implementes interleave in merpp to be able to merpp parts of a file
168
169 - implemented force-functionality to merpp
170
171 - star display to display star catalogs (MAstroCatalog)
172
173 - star display to 'mirror' stars to the camera (MAstroCamera)
174
175 - implemented a new cleaning option which allows cleaning scaled with
176 the real ratio of the rms depending on the pixel size, not only the
177 square root of the pixelsize (MImgCleanStd, MCameraData)
178
179 - removed obsolete MBlind* classes
180
181 - Signal extractor taking the AB flag into account implemented (this makes
182 an odd number of slices for signal extraction possible
183 (MExtractSignalABcorr)
184
185 - implemented a class extracting the pedestal from the raw-data (events)
186 itself using empty lo-gain (MpedCalcFromLoGain)
187
188 - Added mean values to MPedPhotCam
189
190 - Added Makefile for Darwin (this OS is NOT officially supported!)
191
192
193
194 *** Version 0.8.4 (2004/04/19)
195
196 - new fast arrival time extractor using cubic splines:
197 MExtractTimeFastSpline
198
199 - implementes multi-argument support in MDataChain
200 ("pow(a, b)")
201
202 - implemented double reference support in MDataChain
203 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
204
205 - added support in MF for expressiond like
206 "MHillas.fWidth<2*<MHillas.fLength"
207
208 - MDataChain is now able to support variables like [0], [1], ...
209 which can be used in fit functions as parameters. The interface
210 is implemented through the new virtual function
211 MParContainer::SetVariables
212
213 - added new class MArrivalTimeCam/MArrivalTimePix:
214 Storage containers to hold the ArrivalTime of the camera/pixel
215
216 - added new classes for the calibration of relative arrival times:
217 MCalibrationRelTimePix and MCalibrationRelTimeCam
218
219 - added new classes to extract the signal of the blind pixel and the
220 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
221
222 - added new classes for the bad-pixels treatment (MBadPixels*)
223 which are more powerfull than the old ones (MBlindPixel*)
224 and will replace them.
225
226 - added filter against cosmics: MFCosmics
227
228 - added new class MArrivalTimeCalc2:
229 Calculates the arrival time as the signal weighted mean of the time
230 slices in the maximum window
231
232 - added a new macro call pointspreadfucntion.C that fits with a 2D
233 gaussian the DC spot for an star. It gives you the RMS of
234 the PSF and the center of the star, very useful for misspointing
235 studies.
236
237 - added support for multi-telescope camera files. Added classes
238 MStereoCalc and MStereoPar, classes to calculate and store shower
239 parameters calculated from the data of two telescopes, for the MC
240 studies regarding the MAGIC clone.
241
242 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
243 MC data calibrated in photons instead of ADC counts.
244
245 - added three macros to show the calibration and analysis chain of
246 MC data. The macro starmc.C does both calibration and analysis, producing
247 an output containing Hillas parameters for each event. The macro
248 mccalibrate.C does just the calibration and writes out a file containing
249 pixel information in photons instead of FADC data. The macro starmc2.C
250 reads in such a file and produces an output with Hillas parameters.
251
252 - added MPedPhotCalc to compute pedestals in units of photons, see
253 macro pedphotcalc.C
254
255 - added all class to perform the calibration, see macro calibration.C
256
257 - added class MFFT to perform Fast Fourier Transforms
258
259 - added class MSimulatedAnnealing to perform simulated annealing
260 minimizations
261
262 - added new macro bootcampstandardanalysis.C which holds the skeleton
263 of the analysis chain discussed in the december bootcamp.
264
265 - added support for DAQ raw data file format V2
266
267 - implemented an arbitrary time stamp for the events from raw-data
268 files with file version<3. It is calculated from the run number,
269 the date of start and the FADC clock tick from the first module
270
271 - implemented the correct decoding of the event time-stamp
272 coming from the DAQ for raw-data files with file-version>2
273
274 - added a new classes storing the pedestals in units of photons:
275 MPedPhotPix, MPedPhotCam
276
277 - added support for DC current files from the camera control
278
279 - added support for start- and stop-time when merpping report files
280
281 - added MReportCC storing the weather data from the CC-REPORT
282
283 - added class to fill trainings and test matrices (MTFillMatrix)
284
285 - added a filter performing a software trigger (MFSoftwareTrigger)
286
287 - Added classes to perform parts of the standard analysis (Jobs):
288 + MJPedestals
289 + MJCalibration
290 + MJExtractSignal
291 Note: All of them are preliminary!
292
293 - Added Iterator to iterate over files giving only the run-number
294
295 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
296 the evolution of a sector vs time
297
298
299
300 *** Version 0.8.3 (2003/12/05)
301
302 - adapted Random Forest classes to allow the use with MC
303 multi-telescope files which can be produced with the coming
304 camera version 0.7.
305
306 - added classes to read and interprete central control report files
307 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
308
309 - enhanced merpp (the executable) to support .raw and .rep files.
310
311 - added classes for light calibration (MCalibration* and
312 MHCalibration*) by Markus Gaug. Further work has to be and will
313 be done soon.
314
315 - Added a preliminary 'synchronizer' (MReadReports) which will
316 replace MReadMarsFile as soon as it is finished.
317
318 - Added a tutorial macro demonstrating how report files are merpped
319 and how they can be read from the root file in the correct order
320 of time (readrep.C)
321
322 - Added a generalized histogram (similar to MH3) called MVsTime
323 which allows to plot variables (or rules - MDataChain - of
324 variables) vs time. For an example have a look at tempvstime.C.
325
326 - Changed the name of the event trees:
327 + Events --> Events
328 + PedEvents --> Pedestals
329 + CalEvents --> Calibration
330
331 - changed name of MTime in the event trees from MRawEvtTime to MTime
332
333 - added displaying the sector indices to the mars event display
334
335 - Magic Online Analysis (MOnA) implemented in a first version
336 (see mona.cc, MOnlineDump and MOnlineDisplay)
337
338 - added classes to calculate event rate
339 (preliminary: MEventRateCalc, MEventRate)
340
341 - added new executable 'readdaq' to read *.raw files from the DAQ directly
342
343 - added classes dealing with the telescope pointing position (MPointing*)
344
345 - implemented the 'final' Mars time stamp based on some experiences with
346 the new 'Synchonizer'
347
348
349
350 *** Version 0.8.2 (2003/11/10)
351
352 - accelerated standard analysis by a factor of 6-8 ...
353 + doing precalculations in MGeomCam for the pixel area ratio
354 + creating a look up table for the single pixels in MCerPhotEvt
355
356 - added task to calculates weights in case you want to 'change'
357 the energy spectrum of a monte carlo file
358 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
359
360 - added a new executable star which implements the
361 star.C macro as precompiled executable. Currently a flexible
362 setup is not possible, but a 'input card' setup will follow.
363
364 - Starting to implement Multi-Telescope-Support based on the
365 upcomming camera version 0.7. The base for a general support
366 is implemented and the star-functionality is proven to work.
367
368 - Replaced Event-Display in and Camera-Display in the Mars GUI
369 executable by a more convinient display base on MStatusDisplay.
370
371 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
372
373
374
375 *** Version 0.8.1 (2003/10/20)
376
377 - added signal subtraction for pure on data by means of fitting
378 the background in the off region or by performing a combined
379 signal/background fit. Provides necessary histograms for
380 obtaining energy spectra and a light curve.
381
382 - added classes to perform and study the selection of the
383 2nd Level Trigger on MC data (example in triglvl2.C macro)
384
385 - added pedestal calculation
386
387 - implemented "democratic cleaning" (tail cut value proportional
388 to pixel area) according to Wolfgang's suggestion.
389
390 - added Sigmabar treatment (calculation and basic histogramming)
391
392 - added basic routines to apply padding
393
394 - added first implementation of MARS-based source visibility plotter
395 (needs to be linked against slalib, preliminary version)
396
397 - enhanced functionality of data chains: random numbers, conversion
398 functions and access to MHMatrix objects
399
400 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
401 numbers under certain circumstances (runs with 0 events included)
402
403 - fixed a bug in the general filter MF (didn't work on some systems
404 at all)
405
406 - fixed a bug in chaining files, which caused the analysis to crash or
407 ignore files
408
409 - implemented more geometry classes describing the parameters used
410 to simulate the PMT camera
411
412 - added new Monte Carlo classes containing the setup of the different
413 programs in the MC chain.
414
415 - added a (preliminary) general task to evaluate chi-square of a given
416 parameter in an eventloop.
417
418 - first implementation of a container describing the observatory
419 location (Long, Lat, etc)
420
421 - added Random Forest - method for g/h-separation
422
423 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
424 (this means, that it is compiling, but not yet fully tested)
425
426 - added a new status display which can show the present status
427 of histograms while an eventloop is running (MStatusDisplay,
428 an example can be found at status.C)
429
430 - reorganized directories:
431 classes describing the image --> mimage
432 classes containing Monte Carlo Histograms --> mhistmc
433 classes for Random Forest method --> mranforest
434
435 - added (event-)weights to fill histograms
436
437 - colors in logging output to screen
438
439 - changes to the Image Parameter declaration:
440 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
441 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
442 + MHillasExt now derives from MParContainer instead of MHillas
443 --> Files written with the old definition are more or less unreadable
444
445 - reading of reflector files
446
447 - display data from reflector files in the camera
448
449 - implemented currents (and display them in the camera)
450
451 - logarithmic scale in camera
452
453 - added class to iterate through directory contents (MDirIter)
454
455
456
457 *** Version 0.8 (2002/11/18)
458
459 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
460
461 - corrected 48(!) wrong entries in the Next Neighbor table of the
462 Magic Camera (all in the inner part of the outer ring, mostly
463 missing a single NN)
464
465 - Fixed a bug in the table describing the Next Neighbours of the
466 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
467 have any neighbour)
468
469 - changed trigrate.C: now it calculates the pure NSB triggers from
470 a camera file (generated with no showers), so there is no need
471 to introduce them by hand in the BgR array (for more details
472 please ask Abelardo)
473
474 - added MHHadronness (and MHadronness) as a general facility to evaluate
475 the quality of a gamma-hadron seperation method
476
477 - changed MWriteAsciiFile to accept rules (MDataChain)
478
479 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
480 must be replaced by calles to MWriteAsciiFile::AddColumn and
481 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
482 changed.
483
484 - Implemented generalized event-matrices (one row per event)
485 (MHMatrix)
486
487 - implemented the one dimensional composite probabilities
488 (MHCompProb, MCompProbCalc, comprob.C)
489
490 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
491 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
492
493 - Added a camera display displaying the pixel numbers to the
494 event display gui.
495
496 - Added Monte Carlo Informations to event display gui
497
498 - Changed the camera display to display the pixel numbering
499
500 - Added three buttons to the camera display to change the palette
501
502 - Added the number of used and core pixels after image cleaning
503 to MHillas
504
505 - Changed the algorithm used in MHillas according to TDAS 02-03
506
507 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
508
509 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
510
511 - Added fCosDeltaAlpha to MHillasSrc
512
513 - The numbers of photons used to calculate fConc and fConc1 in
514 MHillasExt are now scaled with the pixel size, so that one get
515 a four times smaller value for the bigger pixels in the outer ring.
516
517 - added new task to smooth the camera contents (MCameraSmooth)
518
519 - added possibility to use interpolated pixel values for blind pixels
520 instead of removing it completely from the analysis
521
522 - Implemented the possibility to save the whole eventloop with
523 its setup to a file. This information can be read and from
524 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
525 and MEvtLoop::MakeMacro. If you find something not working, please
526 report - this stuff is still in a beta phase.
527
528 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
529 file having crab starfield, but also for all following files - fixed
530
531 - MTaskList::PrintStatistics can now be instructud to print also the
532 title, too: use PrintStatistics(0, kTRUE)
533
534 - Changed the image cleaning so that pixels with to many 'used'
535 neighbors are left used (to get rid of 'holes' in events)
536
537 - Introduced more output to the camera displays
538
539 - Added an array of histograms (eg one hist per run), MHArray
540
541 - Added a _preliminary_ version of the reader for CT1 PreProc files
542 (MCT1ReadPreProc)
543
544 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
545 (thanks to Raquel)
546
547 - added the first energy estimator (MEnergyEstParam, estimate.C,
548 estfit.C) using a parametrization
549
550 - Added some new Monte Carlo paremeter containers used to store
551 setup information from the MC chain (MMcConfigRunHeader,
552 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
553
554
555
556 *** Version 0.7 (2002/04/30)
557
558 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
559 the pedestal mean value was saved incorrectly. For files from
560 this versions we substract 0.5 from the pedestal mean.
561 WARNING: This may effect your results, so don't wonder...
562
563 - First implementation of an algorithm using only triggered events
564 for the collection area calculation
565
566 - Ascii Output can now also be used for parameter containers which
567 doesn't overload MParCointainer::AsciiWrite
568
569 - The Ascii Output is now also capable of writing single data members
570 of one container
571
572 - You are now able to change the order of the values written to the
573 ascii file
574
575 - You can now specify a conversion factor for each data member written
576 to an ascii file. This may be usefull to change the units of the
577 data member (eg. degrees instead of millimeters in case of the
578 hillas parameters)
579
580 - Replaced old MHillas by a new structure which allows you to extend
581 the parameters stored in MHillas very easily:
582 see MHillas and MHillasExt
583
584 - Added classes to handle source dependancy of image parameters:
585 see MHillasSrc
586
587 - Added container (MBinning) to have a standard input for the binning
588 in different histograms (eg. the Energy bins should be the same in
589 all histograms)
590
591 - Changed Hillas histograms from mm to deg
592
593 - Added the flexible binning to the hillas histograms
594
595 - Added a filter for the alpha parameter (MFAlpha)
596
597 - It is now possible to write single data members of a class object to
598 an output stream instead of the whole container only
599
600 - Added a generalized filter for a data member:
601 MFDataMember filter("MHillas.fWidth", '<', 0.5);
602
603 - Added a generalized Filter parser for more difficult filter rules
604 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
605
606 - Added new Monte Carlo histograms:
607 MHMcEnergyImpact and MHMcEfficiency
608
609 - Added many new histograms needed for the flux calculation.
610
611 - Added a generalized histograms which can fill and show up to three
612 data members in either a one-, two- or three-dimensional histogram, eg:
613 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
614
615 - Added:
616 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
617 * calculation of <Theta> as a function of time (MHThetabarTime)
618 they are needed in the flux calculation in
619 order to select for a given bin in Theta (or time) the appropriate
620 effective collection area, which is assumed to be given as a function
621 of Theta and the true energy
622
623 - Added calculation of the migration matrix in the energy
624 (MHMcEnergyMigration):
625 the migration matrix describes the migration from the true (E_true)
626 to the estimated energy (E_est); it is needed to determine the
627 distribution of E_true from the measured distribution of E_est
628 by unfolding
629
630 - changed the color palette in the camera display to DeapSea.
631
632
633
634 *** Version 0.6 (2002/01/15)
635
636 - Introduce the option of disable pixels (MBlindPixels and
637 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
638 able to deal with Star Field NSB.
639
640 - Fixed a bug in the pedestals substraction
641
642 - Introduced verbosity levels
643
644 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
645
646 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
647 work correctly (thanks to Abelardo)
648
649 - Introduced correct treatment of the diffuse Night Sky Background
650 and NSB (MMcPedestalNSB)
651
652 - Corrected treatment of the electronic noise (MMcPedestalCopy)
653
654 - Introduced MMcRunHeaders which contains monte carlo run informations
655
656 - Added a 'Print'-Task (MPrint) which calls the Print function
657 of a parameter container for each event
658
659 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
660
661 - changes to be more efficient with root 3.02/06
662
663 - root 3.02/06 fixes:
664 + the memory leak when reading MRawEvtData
665 + loosing more time than necessary to update the progress bar
666
667 - MWriteAsciiFile is now capable of writing more than one container
668 in a line. For example: To be able to write Monte Carlo and
669 Hillas values (energy and alpha) in one line.
670
671
672
673 *** Version 0.5 (2001/11/06)
674
675 - Added new GUI functionality (Analysis)
676
677 - Added a camera display to be able to display events in the camera
678 together with the calculated hillas ellipse
679
680 - Added a 'Clone'-Task (MClone) which can clone a parameter container
681 object at any state of the analysis, so that the output are several
682 states
683
684 - Fixed a bug in the collection area error calculation
685 (Thanks to Ciro and Abelardo)
686
687 - Fixed a bug which causes merpp to crash in some environments
688
689 - Implemented auto enabling scheme for Branches to speed up reading
690 a lot (see MReadTree and MTask)
691
692 - Fixed a bug in the Histogram classes which caused histograms to
693 be written to a file by MWriteRootFile without request
694
695 - changed the object I/O from the old stylish root I/O to the new
696 'auto evolution scheme' This was done only for classes which are not
697 yet used in Monte Carlo files, so that these files are still readable.
698
699 - Added support for a progress bar in MEvtLoop and MReadTree
700 (see the Analysis Window in Mars for an example)
701
702 - Fixed a bug in the package creation which disturbed the conversion
703 between a mars version unpacked from a tar file and the repository.
704
705 - Changed the code to writer merpped (converted into root format)
706 raw files, to get faster (around 10%)
707
708
709
710 *** Version 0.4 (2001/09/20)
711
712 - This release is made to compile on a root version >= 3.00
713
714 - Fixed a bug which causes MReadTree to read the first file only
715
716 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
717
718 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
719
720 - Added a task to write several container to a root file (MWriteRootFile)
721
722 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
723
724 - Added calculation of the collection area (MMcCollectionAreaCalc)
725
726 - fixed some bugs in the Hillas calculation
727
728 - added filters to be able to control the task execution dependent on
729 a parameter (for example: the number of level 1 triggers in a MC-file)
730
731
732
733 *** Version 0.3 (2001/04/23)
734
735 - Many demo macros added
736
737 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
738
739 - Hillas Calculation added
740
741 - Standard image cleaning available
742
743 - MReadTree is now able to handle more than one file
744 (Remark: of the same structure)
745
746 - Now we are able to display events in a first version of the
747 Camera event display. To do this we must run the macro
748 "macros/readCT1.C" to read data from CT1.
749
750
751
752 *** Version 0.2 (2001/01/24)
753
754 - First Implementation of a Gui to read the raw data. Start the
755 gui with the command mars.
756
757
758
759 *** Version 0.1 (2000/12/20)
760
761 - First official release 0.1
762
763 - Changes:
764
765 + changed calling style of MRawPixelIterator from do...while to
766 while-loop
767
Note: See TracBrowser for help on using the repository browser.