source: trunk/MagicSoft/Mars/NEWS@ 6332

Last change on this file since 6332 was 6252, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 27.9 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - Calibration is now done autmatically into equiv. photo-electrons like
5 decided by the Collaboration Board
6
7 - Reference lines in the display can be read from resource file
8
9 - Interlaced calibration events can be handled by callisto
10
11 - High-Gain vs. Low-Gain calibration constants can be calculated
12 (but not yet applied) in callisto.
13
14 - class MJCalibTest can be called by callisto
15
16 - interpolated pointing positions are now in Tree "Events" after
17 calibration
18
19 - callisto can now run with three data types: rawdata, rootdata, MC
20
21 - added two classes mreport/MReportStarguider.cc and
22 mreport/MReportStarguider.h for implementing starguider-data
23
24 - the output of merpp-update now contains starguider information:
25 MReportStarguider and MTimeStarguider
26
27 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
28 values were lower than they should. This was more visible for high
29 energy (Size) events.
30
31 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
32
33 - added a new loop to callisto to support the correct extraction of
34 the pedestal and pedestal rms through the signal extractor
35
36 - added class to perform fourier tranformation of a hexagonal structure
37 (MHexagonalFT)
38
39 - added class to perform fourier tranformation of a hexagonal structure
40 in a tasklist (MHexagonalFTCalc) example: hft.C
41
42 - added class to enhance the MCerPhotEvt from the Magic camera geometry
43 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
44 small pixels, example: extendcam.C
45
46 - added possibility to write data to memory (TTree) using MWriteRootFile
47
48 - added possibility to read a TTree stored only in memory by MReadTree
49
50 - new classes to deal with the interleaved calibration events:
51 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
52
53 - implemented filters to callisto to skip calibration events
54
55 - changed callisto to calculate three kinds of pedestals and pedestal rms:
56 + fundamental pedestal (MPedPhotFundamental): extracted directly from
57 the slices by statistics
58 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
59 signal extractor without randomization
60 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
61 with the signal extractor with randomization (extraction window is
62 randomly fixed)
63 The three kind of pedestal is not yet implemented (for speed reasons) as
64 long as nobody really needs it:
65 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
66 extracted with the signal extractor with randomization
67
68 - implemented data reduction in calibrated data by reducing the precision
69 of the stored floating point values (pedestal, rms and signal) to
70 roughly 0.5%
71
72 - fixed showplot to make file format conversion (eg. converting a
73 status display stored in a root file into a postscript file) in
74 batch mode possible:
75 showplot -b --save-as-ps[=outfile.ps] infile.root
76
77 - Allow class names as part of filter rules, eg
78 (MFSupercuts) && (MHillas.fSize>100)
79
80
81
82 *** Version 0.8.6 (2004/10/05)
83
84 - New combined signal and time extractor
85 MExtractTimeAndChargeDigitalFilter
86
87 - The Report for the trigger section in the CC run summary has been
88 updated, and now the IPRs (Individual Pixel Rates) are available.
89
90 - new macros for database interaction: filldotrun.C, filldotrbk.C
91
92 - added new program which can convert colored output which was redirected
93 into a file back into colored text (for example to display it with
94 more): showlog
95
96 - added new program to display an MStatusArray of plots (stored with
97 MStatusDisplay) from a file: showplot
98
99 - Added support for Sequences (MSequence). Sequences are blocks of run
100 files containing the same calibration and belonging to the same
101 source
102
103 - Added a new task (MTaskEnv) which can be used in setup files to switch
104 between different tasks (for example to choose a signal extractor)
105
106 - Implemented automatic file splitting in MWriteRootFile
107
108 - After image cleaning an island index is assigned to all used pixels.
109 The index corresponds to the order of the islands in size.
110
111 - added a cleaning which takes signal height _and_ arrival time into
112 account: probability cleaning (for more details see MImgCleanStd)
113
114 - added a cleaning which takes takes the absolute number of photons
115 times the area ratio as cleaning level
116 (for more details see MImgCleanStd)
117
118 - Changed calculation of image parameters such, that it can be done
119 for all used pixels or the pixels with a defined island index only
120
121 - implemented new image parameters displaying the number of islands,
122 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
123
124 - event display in executable changed to support also calibrated files
125 (done with MJCalibrateSignal)
126
127 - added program doing the calibration and the signal extraction
128 and signal calibration: callisto Most part of the setup is done
129 by a resource file: callisto.rc
130
131 - implemented support for pixels with negative IDs (Raw file format
132 version 4)
133
134 - implemented an new option in merpp (--auto-time) to get the time
135 range for cc and/or caco data from the run header of the raw data
136
137 - New star-program (star and MJStar). Taking calibrated data from
138 callisto/MJCalibrateSignal as input. The setup is done through
139 a resource file: star.rc
140
141 - Added possibility to setup the eventloop in the mars-executable
142 Camera Display by a resource file: mars.rc
143
144 - The the mars-executable Camera Display can now also read
145 calibrated data files written by callisto/MJCalibrateSignal
146
147 - Added a new class which can calculate the source position in
148 the camera from a pointing model known to be correct and
149 the pointing model used for observations (MSrcPosFromModel)
150
151 - added a new version of the class calculating the effective on-time
152 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
153 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
154 MHTimeDiffTheta.
155
156 - added the possibility to count how often a signal is above (or
157 below) a certain threshold in MHCamEvent and MHCamEventRot (this
158 can replace MHTriggerLvl0)
159
160 - added ore convinient ways to set the axis-titles of your histograms
161 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
162 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
163
164
165
166 *** Version 0.8.5 (2004/08/06)
167
168 - new Signal Extractors: MExtractFixedWindowSpline
169 and MExtractAmplitudeSpline
170
171 - implementes interleave in merpp to be able to merpp parts of a file
172
173 - implemented force-functionality to merpp
174
175 - star display to display star catalogs (MAstroCatalog)
176
177 - star display to 'mirror' stars to the camera (MAstroCamera)
178
179 - implemented a new cleaning option which allows cleaning scaled with
180 the real ratio of the rms depending on the pixel size, not only the
181 square root of the pixelsize (MImgCleanStd, MCameraData)
182
183 - removed obsolete MBlind* classes
184
185 - Signal extractor taking the AB flag into account implemented (this makes
186 an odd number of slices for signal extraction possible
187 (MExtractSignalABcorr)
188
189 - implemented a class extracting the pedestal from the raw-data (events)
190 itself using empty lo-gain (MpedCalcFromLoGain)
191
192 - Added mean values to MPedPhotCam
193
194 - Added Makefile for Darwin (this OS is NOT officially supported!)
195
196
197
198 *** Version 0.8.4 (2004/04/19)
199
200 - new fast arrival time extractor using cubic splines:
201 MExtractTimeFastSpline
202
203 - implementes multi-argument support in MDataChain
204 ("pow(a, b)")
205
206 - implemented double reference support in MDataChain
207 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
208
209 - added support in MF for expressiond like
210 "MHillas.fWidth<2*<MHillas.fLength"
211
212 - MDataChain is now able to support variables like [0], [1], ...
213 which can be used in fit functions as parameters. The interface
214 is implemented through the new virtual function
215 MParContainer::SetVariables
216
217 - added new class MArrivalTimeCam/MArrivalTimePix:
218 Storage containers to hold the ArrivalTime of the camera/pixel
219
220 - added new classes for the calibration of relative arrival times:
221 MCalibrationRelTimePix and MCalibrationRelTimeCam
222
223 - added new classes to extract the signal of the blind pixel and the
224 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
225
226 - added new classes for the bad-pixels treatment (MBadPixels*)
227 which are more powerfull than the old ones (MBlindPixel*)
228 and will replace them.
229
230 - added filter against cosmics: MFCosmics
231
232 - added new class MArrivalTimeCalc2:
233 Calculates the arrival time as the signal weighted mean of the time
234 slices in the maximum window
235
236 - added a new macro call pointspreadfucntion.C that fits with a 2D
237 gaussian the DC spot for an star. It gives you the RMS of
238 the PSF and the center of the star, very useful for misspointing
239 studies.
240
241 - added support for multi-telescope camera files. Added classes
242 MStereoCalc and MStereoPar, classes to calculate and store shower
243 parameters calculated from the data of two telescopes, for the MC
244 studies regarding the MAGIC clone.
245
246 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
247 MC data calibrated in photons instead of ADC counts.
248
249 - added three macros to show the calibration and analysis chain of
250 MC data. The macro starmc.C does both calibration and analysis, producing
251 an output containing Hillas parameters for each event. The macro
252 mccalibrate.C does just the calibration and writes out a file containing
253 pixel information in photons instead of FADC data. The macro starmc2.C
254 reads in such a file and produces an output with Hillas parameters.
255
256 - added MPedPhotCalc to compute pedestals in units of photons, see
257 macro pedphotcalc.C
258
259 - added all class to perform the calibration, see macro calibration.C
260
261 - added class MFFT to perform Fast Fourier Transforms
262
263 - added class MSimulatedAnnealing to perform simulated annealing
264 minimizations
265
266 - added new macro bootcampstandardanalysis.C which holds the skeleton
267 of the analysis chain discussed in the december bootcamp.
268
269 - added support for DAQ raw data file format V2
270
271 - implemented an arbitrary time stamp for the events from raw-data
272 files with file version<3. It is calculated from the run number,
273 the date of start and the FADC clock tick from the first module
274
275 - implemented the correct decoding of the event time-stamp
276 coming from the DAQ for raw-data files with file-version>2
277
278 - added a new classes storing the pedestals in units of photons:
279 MPedPhotPix, MPedPhotCam
280
281 - added support for DC current files from the camera control
282
283 - added support for start- and stop-time when merpping report files
284
285 - added MReportCC storing the weather data from the CC-REPORT
286
287 - added class to fill trainings and test matrices (MTFillMatrix)
288
289 - added a filter performing a software trigger (MFSoftwareTrigger)
290
291 - Added classes to perform parts of the standard analysis (Jobs):
292 + MJPedestals
293 + MJCalibration
294 + MJExtractSignal
295 Note: All of them are preliminary!
296
297 - Added Iterator to iterate over files giving only the run-number
298
299 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
300 the evolution of a sector vs time
301
302
303
304 *** Version 0.8.3 (2003/12/05)
305
306 - adapted Random Forest classes to allow the use with MC
307 multi-telescope files which can be produced with the coming
308 camera version 0.7.
309
310 - added classes to read and interprete central control report files
311 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
312
313 - enhanced merpp (the executable) to support .raw and .rep files.
314
315 - added classes for light calibration (MCalibration* and
316 MHCalibration*) by Markus Gaug. Further work has to be and will
317 be done soon.
318
319 - Added a preliminary 'synchronizer' (MReadReports) which will
320 replace MReadMarsFile as soon as it is finished.
321
322 - Added a tutorial macro demonstrating how report files are merpped
323 and how they can be read from the root file in the correct order
324 of time (readrep.C)
325
326 - Added a generalized histogram (similar to MH3) called MVsTime
327 which allows to plot variables (or rules - MDataChain - of
328 variables) vs time. For an example have a look at tempvstime.C.
329
330 - Changed the name of the event trees:
331 + Events --> Events
332 + PedEvents --> Pedestals
333 + CalEvents --> Calibration
334
335 - changed name of MTime in the event trees from MRawEvtTime to MTime
336
337 - added displaying the sector indices to the mars event display
338
339 - Magic Online Analysis (MOnA) implemented in a first version
340 (see mona.cc, MOnlineDump and MOnlineDisplay)
341
342 - added classes to calculate event rate
343 (preliminary: MEventRateCalc, MEventRate)
344
345 - added new executable 'readdaq' to read *.raw files from the DAQ directly
346
347 - added classes dealing with the telescope pointing position (MPointing*)
348
349 - implemented the 'final' Mars time stamp based on some experiences with
350 the new 'Synchonizer'
351
352
353
354 *** Version 0.8.2 (2003/11/10)
355
356 - accelerated standard analysis by a factor of 6-8 ...
357 + doing precalculations in MGeomCam for the pixel area ratio
358 + creating a look up table for the single pixels in MCerPhotEvt
359
360 - added task to calculates weights in case you want to 'change'
361 the energy spectrum of a monte carlo file
362 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
363
364 - added a new executable star which implements the
365 star.C macro as precompiled executable. Currently a flexible
366 setup is not possible, but a 'input card' setup will follow.
367
368 - Starting to implement Multi-Telescope-Support based on the
369 upcomming camera version 0.7. The base for a general support
370 is implemented and the star-functionality is proven to work.
371
372 - Replaced Event-Display in and Camera-Display in the Mars GUI
373 executable by a more convinient display base on MStatusDisplay.
374
375 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
376
377
378
379 *** Version 0.8.1 (2003/10/20)
380
381 - added signal subtraction for pure on data by means of fitting
382 the background in the off region or by performing a combined
383 signal/background fit. Provides necessary histograms for
384 obtaining energy spectra and a light curve.
385
386 - added classes to perform and study the selection of the
387 2nd Level Trigger on MC data (example in triglvl2.C macro)
388
389 - added pedestal calculation
390
391 - implemented "democratic cleaning" (tail cut value proportional
392 to pixel area) according to Wolfgang's suggestion.
393
394 - added Sigmabar treatment (calculation and basic histogramming)
395
396 - added basic routines to apply padding
397
398 - added first implementation of MARS-based source visibility plotter
399 (needs to be linked against slalib, preliminary version)
400
401 - enhanced functionality of data chains: random numbers, conversion
402 functions and access to MHMatrix objects
403
404 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
405 numbers under certain circumstances (runs with 0 events included)
406
407 - fixed a bug in the general filter MF (didn't work on some systems
408 at all)
409
410 - fixed a bug in chaining files, which caused the analysis to crash or
411 ignore files
412
413 - implemented more geometry classes describing the parameters used
414 to simulate the PMT camera
415
416 - added new Monte Carlo classes containing the setup of the different
417 programs in the MC chain.
418
419 - added a (preliminary) general task to evaluate chi-square of a given
420 parameter in an eventloop.
421
422 - first implementation of a container describing the observatory
423 location (Long, Lat, etc)
424
425 - added Random Forest - method for g/h-separation
426
427 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
428 (this means, that it is compiling, but not yet fully tested)
429
430 - added a new status display which can show the present status
431 of histograms while an eventloop is running (MStatusDisplay,
432 an example can be found at status.C)
433
434 - reorganized directories:
435 classes describing the image --> mimage
436 classes containing Monte Carlo Histograms --> mhistmc
437 classes for Random Forest method --> mranforest
438
439 - added (event-)weights to fill histograms
440
441 - colors in logging output to screen
442
443 - changes to the Image Parameter declaration:
444 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
445 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
446 + MHillasExt now derives from MParContainer instead of MHillas
447 --> Files written with the old definition are more or less unreadable
448
449 - reading of reflector files
450
451 - display data from reflector files in the camera
452
453 - implemented currents (and display them in the camera)
454
455 - logarithmic scale in camera
456
457 - added class to iterate through directory contents (MDirIter)
458
459
460
461 *** Version 0.8 (2002/11/18)
462
463 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
464
465 - corrected 48(!) wrong entries in the Next Neighbor table of the
466 Magic Camera (all in the inner part of the outer ring, mostly
467 missing a single NN)
468
469 - Fixed a bug in the table describing the Next Neighbours of the
470 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
471 have any neighbour)
472
473 - changed trigrate.C: now it calculates the pure NSB triggers from
474 a camera file (generated with no showers), so there is no need
475 to introduce them by hand in the BgR array (for more details
476 please ask Abelardo)
477
478 - added MHHadronness (and MHadronness) as a general facility to evaluate
479 the quality of a gamma-hadron seperation method
480
481 - changed MWriteAsciiFile to accept rules (MDataChain)
482
483 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
484 must be replaced by calles to MWriteAsciiFile::AddColumn and
485 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
486 changed.
487
488 - Implemented generalized event-matrices (one row per event)
489 (MHMatrix)
490
491 - implemented the one dimensional composite probabilities
492 (MHCompProb, MCompProbCalc, comprob.C)
493
494 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
495 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
496
497 - Added a camera display displaying the pixel numbers to the
498 event display gui.
499
500 - Added Monte Carlo Informations to event display gui
501
502 - Changed the camera display to display the pixel numbering
503
504 - Added three buttons to the camera display to change the palette
505
506 - Added the number of used and core pixels after image cleaning
507 to MHillas
508
509 - Changed the algorithm used in MHillas according to TDAS 02-03
510
511 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
512
513 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
514
515 - Added fCosDeltaAlpha to MHillasSrc
516
517 - The numbers of photons used to calculate fConc and fConc1 in
518 MHillasExt are now scaled with the pixel size, so that one get
519 a four times smaller value for the bigger pixels in the outer ring.
520
521 - added new task to smooth the camera contents (MCameraSmooth)
522
523 - added possibility to use interpolated pixel values for blind pixels
524 instead of removing it completely from the analysis
525
526 - Implemented the possibility to save the whole eventloop with
527 its setup to a file. This information can be read and from
528 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
529 and MEvtLoop::MakeMacro. If you find something not working, please
530 report - this stuff is still in a beta phase.
531
532 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
533 file having crab starfield, but also for all following files - fixed
534
535 - MTaskList::PrintStatistics can now be instructud to print also the
536 title, too: use PrintStatistics(0, kTRUE)
537
538 - Changed the image cleaning so that pixels with to many 'used'
539 neighbors are left used (to get rid of 'holes' in events)
540
541 - Introduced more output to the camera displays
542
543 - Added an array of histograms (eg one hist per run), MHArray
544
545 - Added a _preliminary_ version of the reader for CT1 PreProc files
546 (MCT1ReadPreProc)
547
548 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
549 (thanks to Raquel)
550
551 - added the first energy estimator (MEnergyEstParam, estimate.C,
552 estfit.C) using a parametrization
553
554 - Added some new Monte Carlo paremeter containers used to store
555 setup information from the MC chain (MMcConfigRunHeader,
556 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
557
558
559
560 *** Version 0.7 (2002/04/30)
561
562 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
563 the pedestal mean value was saved incorrectly. For files from
564 this versions we substract 0.5 from the pedestal mean.
565 WARNING: This may effect your results, so don't wonder...
566
567 - First implementation of an algorithm using only triggered events
568 for the collection area calculation
569
570 - Ascii Output can now also be used for parameter containers which
571 doesn't overload MParCointainer::AsciiWrite
572
573 - The Ascii Output is now also capable of writing single data members
574 of one container
575
576 - You are now able to change the order of the values written to the
577 ascii file
578
579 - You can now specify a conversion factor for each data member written
580 to an ascii file. This may be usefull to change the units of the
581 data member (eg. degrees instead of millimeters in case of the
582 hillas parameters)
583
584 - Replaced old MHillas by a new structure which allows you to extend
585 the parameters stored in MHillas very easily:
586 see MHillas and MHillasExt
587
588 - Added classes to handle source dependancy of image parameters:
589 see MHillasSrc
590
591 - Added container (MBinning) to have a standard input for the binning
592 in different histograms (eg. the Energy bins should be the same in
593 all histograms)
594
595 - Changed Hillas histograms from mm to deg
596
597 - Added the flexible binning to the hillas histograms
598
599 - Added a filter for the alpha parameter (MFAlpha)
600
601 - It is now possible to write single data members of a class object to
602 an output stream instead of the whole container only
603
604 - Added a generalized filter for a data member:
605 MFDataMember filter("MHillas.fWidth", '<', 0.5);
606
607 - Added a generalized Filter parser for more difficult filter rules
608 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
609
610 - Added new Monte Carlo histograms:
611 MHMcEnergyImpact and MHMcEfficiency
612
613 - Added many new histograms needed for the flux calculation.
614
615 - Added a generalized histograms which can fill and show up to three
616 data members in either a one-, two- or three-dimensional histogram, eg:
617 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
618
619 - Added:
620 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
621 * calculation of <Theta> as a function of time (MHThetabarTime)
622 they are needed in the flux calculation in
623 order to select for a given bin in Theta (or time) the appropriate
624 effective collection area, which is assumed to be given as a function
625 of Theta and the true energy
626
627 - Added calculation of the migration matrix in the energy
628 (MHMcEnergyMigration):
629 the migration matrix describes the migration from the true (E_true)
630 to the estimated energy (E_est); it is needed to determine the
631 distribution of E_true from the measured distribution of E_est
632 by unfolding
633
634 - changed the color palette in the camera display to DeapSea.
635
636
637
638 *** Version 0.6 (2002/01/15)
639
640 - Introduce the option of disable pixels (MBlindPixels and
641 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
642 able to deal with Star Field NSB.
643
644 - Fixed a bug in the pedestals substraction
645
646 - Introduced verbosity levels
647
648 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
649
650 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
651 work correctly (thanks to Abelardo)
652
653 - Introduced correct treatment of the diffuse Night Sky Background
654 and NSB (MMcPedestalNSB)
655
656 - Corrected treatment of the electronic noise (MMcPedestalCopy)
657
658 - Introduced MMcRunHeaders which contains monte carlo run informations
659
660 - Added a 'Print'-Task (MPrint) which calls the Print function
661 of a parameter container for each event
662
663 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
664
665 - changes to be more efficient with root 3.02/06
666
667 - root 3.02/06 fixes:
668 + the memory leak when reading MRawEvtData
669 + loosing more time than necessary to update the progress bar
670
671 - MWriteAsciiFile is now capable of writing more than one container
672 in a line. For example: To be able to write Monte Carlo and
673 Hillas values (energy and alpha) in one line.
674
675
676
677 *** Version 0.5 (2001/11/06)
678
679 - Added new GUI functionality (Analysis)
680
681 - Added a camera display to be able to display events in the camera
682 together with the calculated hillas ellipse
683
684 - Added a 'Clone'-Task (MClone) which can clone a parameter container
685 object at any state of the analysis, so that the output are several
686 states
687
688 - Fixed a bug in the collection area error calculation
689 (Thanks to Ciro and Abelardo)
690
691 - Fixed a bug which causes merpp to crash in some environments
692
693 - Implemented auto enabling scheme for Branches to speed up reading
694 a lot (see MReadTree and MTask)
695
696 - Fixed a bug in the Histogram classes which caused histograms to
697 be written to a file by MWriteRootFile without request
698
699 - changed the object I/O from the old stylish root I/O to the new
700 'auto evolution scheme' This was done only for classes which are not
701 yet used in Monte Carlo files, so that these files are still readable.
702
703 - Added support for a progress bar in MEvtLoop and MReadTree
704 (see the Analysis Window in Mars for an example)
705
706 - Fixed a bug in the package creation which disturbed the conversion
707 between a mars version unpacked from a tar file and the repository.
708
709 - Changed the code to writer merpped (converted into root format)
710 raw files, to get faster (around 10%)
711
712
713
714 *** Version 0.4 (2001/09/20)
715
716 - This release is made to compile on a root version >= 3.00
717
718 - Fixed a bug which causes MReadTree to read the first file only
719
720 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
721
722 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
723
724 - Added a task to write several container to a root file (MWriteRootFile)
725
726 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
727
728 - Added calculation of the collection area (MMcCollectionAreaCalc)
729
730 - fixed some bugs in the Hillas calculation
731
732 - added filters to be able to control the task execution dependent on
733 a parameter (for example: the number of level 1 triggers in a MC-file)
734
735
736
737 *** Version 0.3 (2001/04/23)
738
739 - Many demo macros added
740
741 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
742
743 - Hillas Calculation added
744
745 - Standard image cleaning available
746
747 - MReadTree is now able to handle more than one file
748 (Remark: of the same structure)
749
750 - Now we are able to display events in a first version of the
751 Camera event display. To do this we must run the macro
752 "macros/readCT1.C" to read data from CT1.
753
754
755
756 *** Version 0.2 (2001/01/24)
757
758 - First Implementation of a Gui to read the raw data. Start the
759 gui with the command mars.
760
761
762
763 *** Version 0.1 (2000/12/20)
764
765 - First official release 0.1
766
767 - Changes:
768
769 + changed calling style of MRawPixelIterator from do...while to
770 while-loop
771
Note: See TracBrowser for help on using the repository browser.