source: trunk/MagicSoft/Mars/NEWS@ 6889

Last change on this file since 6889 was 6889, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 29.0 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4
5 - Fix bug on the arrival time reconstruction when using Digital
6 Filter
7
8 - all executables now return 2 where in previous versions -1 has
9 been returned (gave problems with shell-scripts)
10
11 - the Hi-/Lo-Gain intercalibration for monte carlo files is now
12 also done with a intercalibration input file
13
14 - a bug in the time fine adjustment of the digital filter has been fixed
15
16
17
18 *** Version 0.9 (2005/03/23)
19
20 - Calibration is now done autmatically into photo-electrons like
21 decided by the Collaboration Board
22
23 - Reference lines in the display can be read from resource file
24
25 - Interlaced calibration events can be handled by callisto
26
27 - Hi-Gain vs. Lo-Gain calibration constants can be calculated
28 and applied in callisto.
29
30 - class MJCalibTest can be called by callisto
31
32 - callisto can now run with three data types: rawdata, rootdata, MC
33
34 - added two classes mreport/MReportStarguider.cc and
35 mreport/MReportStarguider.h for implementing starguider-data
36
37 - the output of merpp-update now contains starguider information:
38 MReportStarguider and MTimeStarguider
39
40 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
41 values were lower than they should. This was more visible for high
42 energy (Size) events.
43
44 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
45
46 - added a new loop to callisto to support the correct extraction of
47 the pedestal and pedestal rms through the signal extractor
48
49 - added class to perform fourier tranformation of a hexagonal structure
50 (MHexagonalFT)
51
52 - added class to perform fourier tranformation of a hexagonal structure
53 in a tasklist (MHexagonalFTCalc) example: hft.C
54
55 - added class to enhance the MCerPhotEvt from the Magic camera geometry
56 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
57 small pixels, example: extendcam.C
58
59 - added possibility to write data to memory (TTree) using MWriteRootFile
60
61 - added possibility to read a TTree stored only in memory by MReadTree
62
63 - new classes to deal with the interleaved calibration events:
64 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
65
66 - implemented filters to callisto to skip calibration events
67
68 - changed callisto to calculate three kinds of pedestals and pedestal rms:
69 + fundamental pedestal (MPedPhotFundamental): extracted directly from
70 the slices by statistics
71 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
72 signal extractor without randomization
73 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
74 with the signal extractor with randomization (extraction window is
75 randomly fixed)
76 The three kind of pedestal is not yet implemented (for speed reasons) as
77 long as nobody really needs it:
78 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
79 extracted with the signal extractor with randomization
80
81 - callisto now finds the pulse position in the data automatically
82
83 - implemented data reduction in calibrated data by reducing the precision
84 of the stored floating point values (pedestal, rms and signal) to
85 roughly 0.5%
86
87 - fixed showplot to make file format conversion (eg. converting a
88 status display stored in a root file into a postscript file) in
89 batch mode possible:
90 showplot -b --save-as-ps[=outfile.ps] infile.root
91
92 - Allow class names as part of filter rules, eg
93 (MFSupercuts) && (MHillas.fSize>100)
94
95 - fixed a lot of stuff to allow all programs to process MonteCarlo
96 camera files.
97
98 - enhanced possibility to debug reading of resource file
99
100 - MDataChain should handle priorities of operator more
101 accurate now
102
103 - completely revised the container in which the signal is stored
104 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
105 * the new implementation is faster and
106 * needs less storage space
107
108 - FIRST version which can process Monte Carlos through the
109 whole chain of programs (callisto, star, etc)
110
111 - implemented new image parameters for the border length of
112 the shower image (MNewImagePar2)
113
114 - implemented wobble-mode in ganymed
115
116 - new class (MJOptimize) taking care of all optimization processes
117
118
119
120 *** Version 0.8.6 (2004/10/05)
121
122 - New combined signal and time extractor
123 MExtractTimeAndChargeDigitalFilter
124
125 - The Report for the trigger section in the CC run summary has been
126 updated, and now the IPRs (Individual Pixel Rates) are available.
127
128 - new macros for database interaction: filldotrun.C, filldotrbk.C
129
130 - added new program which can convert colored output which was redirected
131 into a file back into colored text (for example to display it with
132 more): showlog
133
134 - added new program to display an MStatusArray of plots (stored with
135 MStatusDisplay) from a file: showplot
136
137 - Added support for Sequences (MSequence). Sequences are blocks of run
138 files containing the same calibration and belonging to the same
139 source
140
141 - Added a new task (MTaskEnv) which can be used in setup files to switch
142 between different tasks (for example to choose a signal extractor)
143
144 - Implemented automatic file splitting in MWriteRootFile
145
146 - After image cleaning an island index is assigned to all used pixels.
147 The index corresponds to the order of the islands in size.
148
149 - added a cleaning which takes signal height _and_ arrival time into
150 account: probability cleaning (for more details see MImgCleanStd)
151
152 - added a cleaning which takes takes the absolute number of photons
153 times the area ratio as cleaning level
154 (for more details see MImgCleanStd)
155
156 - Changed calculation of image parameters such, that it can be done
157 for all used pixels or the pixels with a defined island index only
158
159 - implemented new image parameters displaying the number of islands,
160 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
161
162 - event display in executable changed to support also calibrated files
163 (done with MJCalibrateSignal)
164
165 - added program doing the calibration and the signal extraction
166 and signal calibration: callisto Most part of the setup is done
167 by a resource file: callisto.rc
168
169 - implemented support for pixels with negative IDs (Raw file format
170 version 4)
171
172 - implemented an new option in merpp (--auto-time) to get the time
173 range for cc and/or caco data from the run header of the raw data
174
175 - New star-program (star and MJStar). Taking calibrated data from
176 callisto/MJCalibrateSignal as input. The setup is done through
177 a resource file: star.rc
178
179 - Added possibility to setup the eventloop in the mars-executable
180 Camera Display by a resource file: mars.rc
181
182 - The the mars-executable Camera Display can now also read
183 calibrated data files written by callisto/MJCalibrateSignal
184
185 - Added a new class which can calculate the source position in
186 the camera from a pointing model known to be correct and
187 the pointing model used for observations (MSrcPosFromModel)
188
189 - added a new version of the class calculating the effective on-time
190 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
191 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
192 MHTimeDiffTheta.
193
194 - added the possibility to count how often a signal is above (or
195 below) a certain threshold in MHCamEvent and MHCamEventRot (this
196 can replace MHTriggerLvl0)
197
198 - added ore convinient ways to set the axis-titles of your histograms
199 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
200 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
201
202
203
204 *** Version 0.8.5 (2004/08/06)
205
206 - new Signal Extractors: MExtractFixedWindowSpline
207 and MExtractAmplitudeSpline
208
209 - implementes interleave in merpp to be able to merpp parts of a file
210
211 - implemented force-functionality to merpp
212
213 - star display to display star catalogs (MAstroCatalog)
214
215 - star display to 'mirror' stars to the camera (MAstroCamera)
216
217 - implemented a new cleaning option which allows cleaning scaled with
218 the real ratio of the rms depending on the pixel size, not only the
219 square root of the pixelsize (MImgCleanStd, MCameraData)
220
221 - removed obsolete MBlind* classes
222
223 - Signal extractor taking the AB flag into account implemented (this makes
224 an odd number of slices for signal extraction possible
225 (MExtractSignalABcorr)
226
227 - implemented a class extracting the pedestal from the raw-data (events)
228 itself using empty lo-gain (MpedCalcFromLoGain)
229
230 - Added mean values to MPedPhotCam
231
232 - Added Makefile for Darwin (this OS is NOT officially supported!)
233
234
235
236 *** Version 0.8.4 (2004/04/19)
237
238 - new fast arrival time extractor using cubic splines:
239 MExtractTimeFastSpline
240
241 - implementes multi-argument support in MDataChain
242 ("pow(a, b)")
243
244 - implemented double reference support in MDataChain
245 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
246
247 - added support in MF for expressiond like
248 "MHillas.fWidth<2*<MHillas.fLength"
249
250 - MDataChain is now able to support variables like [0], [1], ...
251 which can be used in fit functions as parameters. The interface
252 is implemented through the new virtual function
253 MParContainer::SetVariables
254
255 - added new class MArrivalTimeCam/MArrivalTimePix:
256 Storage containers to hold the ArrivalTime of the camera/pixel
257
258 - added new classes for the calibration of relative arrival times:
259 MCalibrationRelTimePix and MCalibrationRelTimeCam
260
261 - added new classes to extract the signal of the blind pixel and the
262 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
263
264 - added new classes for the bad-pixels treatment (MBadPixels*)
265 which are more powerfull than the old ones (MBlindPixel*)
266 and will replace them.
267
268 - added filter against cosmics: MFCosmics
269
270 - added new class MArrivalTimeCalc2:
271 Calculates the arrival time as the signal weighted mean of the time
272 slices in the maximum window
273
274 - added a new macro call pointspreadfucntion.C that fits with a 2D
275 gaussian the DC spot for an star. It gives you the RMS of
276 the PSF and the center of the star, very useful for misspointing
277 studies.
278
279 - added support for multi-telescope camera files. Added classes
280 MStereoCalc and MStereoPar, classes to calculate and store shower
281 parameters calculated from the data of two telescopes, for the MC
282 studies regarding the MAGIC clone.
283
284 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
285 MC data calibrated in photons instead of ADC counts.
286
287 - added three macros to show the calibration and analysis chain of
288 MC data. The macro starmc.C does both calibration and analysis, producing
289 an output containing Hillas parameters for each event. The macro
290 mccalibrate.C does just the calibration and writes out a file containing
291 pixel information in photons instead of FADC data. The macro starmc2.C
292 reads in such a file and produces an output with Hillas parameters.
293
294 - added MPedPhotCalc to compute pedestals in units of photons, see
295 macro pedphotcalc.C
296
297 - added all class to perform the calibration, see macro calibration.C
298
299 - added class MFFT to perform Fast Fourier Transforms
300
301 - added class MSimulatedAnnealing to perform simulated annealing
302 minimizations
303
304 - added new macro bootcampstandardanalysis.C which holds the skeleton
305 of the analysis chain discussed in the december bootcamp.
306
307 - added support for DAQ raw data file format V2
308
309 - implemented an arbitrary time stamp for the events from raw-data
310 files with file version<3. It is calculated from the run number,
311 the date of start and the FADC clock tick from the first module
312
313 - implemented the correct decoding of the event time-stamp
314 coming from the DAQ for raw-data files with file-version>2
315
316 - added a new classes storing the pedestals in units of photons:
317 MPedPhotPix, MPedPhotCam
318
319 - added support for DC current files from the camera control
320
321 - added support for start- and stop-time when merpping report files
322
323 - added MReportCC storing the weather data from the CC-REPORT
324
325 - added class to fill trainings and test matrices (MTFillMatrix)
326
327 - added a filter performing a software trigger (MFSoftwareTrigger)
328
329 - Added classes to perform parts of the standard analysis (Jobs):
330 + MJPedestals
331 + MJCalibration
332 + MJExtractSignal
333 Note: All of them are preliminary!
334
335 - Added Iterator to iterate over files giving only the run-number
336
337 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
338 the evolution of a sector vs time
339
340
341
342 *** Version 0.8.3 (2003/12/05)
343
344 - adapted Random Forest classes to allow the use with MC
345 multi-telescope files which can be produced with the coming
346 camera version 0.7.
347
348 - added classes to read and interprete central control report files
349 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
350
351 - enhanced merpp (the executable) to support .raw and .rep files.
352
353 - added classes for light calibration (MCalibration* and
354 MHCalibration*) by Markus Gaug. Further work has to be and will
355 be done soon.
356
357 - Added a preliminary 'synchronizer' (MReadReports) which will
358 replace MReadMarsFile as soon as it is finished.
359
360 - Added a tutorial macro demonstrating how report files are merpped
361 and how they can be read from the root file in the correct order
362 of time (readrep.C)
363
364 - Added a generalized histogram (similar to MH3) called MVsTime
365 which allows to plot variables (or rules - MDataChain - of
366 variables) vs time. For an example have a look at tempvstime.C.
367
368 - Changed the name of the event trees:
369 + Events --> Events
370 + PedEvents --> Pedestals
371 + CalEvents --> Calibration
372
373 - changed name of MTime in the event trees from MRawEvtTime to MTime
374
375 - added displaying the sector indices to the mars event display
376
377 - Magic Online Analysis (MOnA) implemented in a first version
378 (see mona.cc, MOnlineDump and MOnlineDisplay)
379
380 - added classes to calculate event rate
381 (preliminary: MEventRateCalc, MEventRate)
382
383 - added new executable 'readdaq' to read *.raw files from the DAQ directly
384
385 - added classes dealing with the telescope pointing position (MPointing*)
386
387 - implemented the 'final' Mars time stamp based on some experiences with
388 the new 'Synchonizer'
389
390
391
392 *** Version 0.8.2 (2003/11/10)
393
394 - accelerated standard analysis by a factor of 6-8 ...
395 + doing precalculations in MGeomCam for the pixel area ratio
396 + creating a look up table for the single pixels in MCerPhotEvt
397
398 - added task to calculates weights in case you want to 'change'
399 the energy spectrum of a monte carlo file
400 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
401
402 - added a new executable star which implements the
403 star.C macro as precompiled executable. Currently a flexible
404 setup is not possible, but a 'input card' setup will follow.
405
406 - Starting to implement Multi-Telescope-Support based on the
407 upcomming camera version 0.7. The base for a general support
408 is implemented and the star-functionality is proven to work.
409
410 - Replaced Event-Display in and Camera-Display in the Mars GUI
411 executable by a more convinient display base on MStatusDisplay.
412
413 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
414
415
416
417 *** Version 0.8.1 (2003/10/20)
418
419 - added signal subtraction for pure on data by means of fitting
420 the background in the off region or by performing a combined
421 signal/background fit. Provides necessary histograms for
422 obtaining energy spectra and a light curve.
423
424 - added classes to perform and study the selection of the
425 2nd Level Trigger on MC data (example in triglvl2.C macro)
426
427 - added pedestal calculation
428
429 - implemented "democratic cleaning" (tail cut value proportional
430 to pixel area) according to Wolfgang's suggestion.
431
432 - added Sigmabar treatment (calculation and basic histogramming)
433
434 - added basic routines to apply padding
435
436 - added first implementation of MARS-based source visibility plotter
437 (needs to be linked against slalib, preliminary version)
438
439 - enhanced functionality of data chains: random numbers, conversion
440 functions and access to MHMatrix objects
441
442 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
443 numbers under certain circumstances (runs with 0 events included)
444
445 - fixed a bug in the general filter MF (didn't work on some systems
446 at all)
447
448 - fixed a bug in chaining files, which caused the analysis to crash or
449 ignore files
450
451 - implemented more geometry classes describing the parameters used
452 to simulate the PMT camera
453
454 - added new Monte Carlo classes containing the setup of the different
455 programs in the MC chain.
456
457 - added a (preliminary) general task to evaluate chi-square of a given
458 parameter in an eventloop.
459
460 - first implementation of a container describing the observatory
461 location (Long, Lat, etc)
462
463 - added Random Forest - method for g/h-separation
464
465 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
466 (this means, that it is compiling, but not yet fully tested)
467
468 - added a new status display which can show the present status
469 of histograms while an eventloop is running (MStatusDisplay,
470 an example can be found at status.C)
471
472 - reorganized directories:
473 classes describing the image --> mimage
474 classes containing Monte Carlo Histograms --> mhistmc
475 classes for Random Forest method --> mranforest
476
477 - added (event-)weights to fill histograms
478
479 - colors in logging output to screen
480
481 - changes to the Image Parameter declaration:
482 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
483 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
484 + MHillasExt now derives from MParContainer instead of MHillas
485 --> Files written with the old definition are more or less unreadable
486
487 - reading of reflector files
488
489 - display data from reflector files in the camera
490
491 - implemented currents (and display them in the camera)
492
493 - logarithmic scale in camera
494
495 - added class to iterate through directory contents (MDirIter)
496
497
498
499 *** Version 0.8 (2002/11/18)
500
501 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
502
503 - corrected 48(!) wrong entries in the Next Neighbor table of the
504 Magic Camera (all in the inner part of the outer ring, mostly
505 missing a single NN)
506
507 - Fixed a bug in the table describing the Next Neighbours of the
508 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
509 have any neighbour)
510
511 - changed trigrate.C: now it calculates the pure NSB triggers from
512 a camera file (generated with no showers), so there is no need
513 to introduce them by hand in the BgR array (for more details
514 please ask Abelardo)
515
516 - added MHHadronness (and MHadronness) as a general facility to evaluate
517 the quality of a gamma-hadron seperation method
518
519 - changed MWriteAsciiFile to accept rules (MDataChain)
520
521 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
522 must be replaced by calles to MWriteAsciiFile::AddColumn and
523 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
524 changed.
525
526 - Implemented generalized event-matrices (one row per event)
527 (MHMatrix)
528
529 - implemented the one dimensional composite probabilities
530 (MHCompProb, MCompProbCalc, comprob.C)
531
532 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
533 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
534
535 - Added a camera display displaying the pixel numbers to the
536 event display gui.
537
538 - Added Monte Carlo Informations to event display gui
539
540 - Changed the camera display to display the pixel numbering
541
542 - Added three buttons to the camera display to change the palette
543
544 - Added the number of used and core pixels after image cleaning
545 to MHillas
546
547 - Changed the algorithm used in MHillas according to TDAS 02-03
548
549 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
550
551 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
552
553 - Added fCosDeltaAlpha to MHillasSrc
554
555 - The numbers of photons used to calculate fConc and fConc1 in
556 MHillasExt are now scaled with the pixel size, so that one get
557 a four times smaller value for the bigger pixels in the outer ring.
558
559 - added new task to smooth the camera contents (MCameraSmooth)
560
561 - added possibility to use interpolated pixel values for blind pixels
562 instead of removing it completely from the analysis
563
564 - Implemented the possibility to save the whole eventloop with
565 its setup to a file. This information can be read and from
566 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
567 and MEvtLoop::MakeMacro. If you find something not working, please
568 report - this stuff is still in a beta phase.
569
570 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
571 file having crab starfield, but also for all following files - fixed
572
573 - MTaskList::PrintStatistics can now be instructud to print also the
574 title, too: use PrintStatistics(0, kTRUE)
575
576 - Changed the image cleaning so that pixels with to many 'used'
577 neighbors are left used (to get rid of 'holes' in events)
578
579 - Introduced more output to the camera displays
580
581 - Added an array of histograms (eg one hist per run), MHArray
582
583 - Added a _preliminary_ version of the reader for CT1 PreProc files
584 (MCT1ReadPreProc)
585
586 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
587 (thanks to Raquel)
588
589 - added the first energy estimator (MEnergyEstParam, estimate.C,
590 estfit.C) using a parametrization
591
592 - Added some new Monte Carlo paremeter containers used to store
593 setup information from the MC chain (MMcConfigRunHeader,
594 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
595
596
597
598 *** Version 0.7 (2002/04/30)
599
600 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
601 the pedestal mean value was saved incorrectly. For files from
602 this versions we substract 0.5 from the pedestal mean.
603 WARNING: This may effect your results, so don't wonder...
604
605 - First implementation of an algorithm using only triggered events
606 for the collection area calculation
607
608 - Ascii Output can now also be used for parameter containers which
609 doesn't overload MParCointainer::AsciiWrite
610
611 - The Ascii Output is now also capable of writing single data members
612 of one container
613
614 - You are now able to change the order of the values written to the
615 ascii file
616
617 - You can now specify a conversion factor for each data member written
618 to an ascii file. This may be usefull to change the units of the
619 data member (eg. degrees instead of millimeters in case of the
620 hillas parameters)
621
622 - Replaced old MHillas by a new structure which allows you to extend
623 the parameters stored in MHillas very easily:
624 see MHillas and MHillasExt
625
626 - Added classes to handle source dependancy of image parameters:
627 see MHillasSrc
628
629 - Added container (MBinning) to have a standard input for the binning
630 in different histograms (eg. the Energy bins should be the same in
631 all histograms)
632
633 - Changed Hillas histograms from mm to deg
634
635 - Added the flexible binning to the hillas histograms
636
637 - Added a filter for the alpha parameter (MFAlpha)
638
639 - It is now possible to write single data members of a class object to
640 an output stream instead of the whole container only
641
642 - Added a generalized filter for a data member:
643 MFDataMember filter("MHillas.fWidth", '<', 0.5);
644
645 - Added a generalized Filter parser for more difficult filter rules
646 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
647
648 - Added new Monte Carlo histograms:
649 MHMcEnergyImpact and MHMcEfficiency
650
651 - Added many new histograms needed for the flux calculation.
652
653 - Added a generalized histograms which can fill and show up to three
654 data members in either a one-, two- or three-dimensional histogram, eg:
655 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
656
657 - Added:
658 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
659 * calculation of <Theta> as a function of time (MHThetabarTime)
660 they are needed in the flux calculation in
661 order to select for a given bin in Theta (or time) the appropriate
662 effective collection area, which is assumed to be given as a function
663 of Theta and the true energy
664
665 - Added calculation of the migration matrix in the energy
666 (MHMcEnergyMigration):
667 the migration matrix describes the migration from the true (E_true)
668 to the estimated energy (E_est); it is needed to determine the
669 distribution of E_true from the measured distribution of E_est
670 by unfolding
671
672 - changed the color palette in the camera display to DeapSea.
673
674
675
676 *** Version 0.6 (2002/01/15)
677
678 - Introduce the option of disable pixels (MBlindPixels and
679 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
680 able to deal with Star Field NSB.
681
682 - Fixed a bug in the pedestals substraction
683
684 - Introduced verbosity levels
685
686 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
687
688 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
689 work correctly (thanks to Abelardo)
690
691 - Introduced correct treatment of the diffuse Night Sky Background
692 and NSB (MMcPedestalNSB)
693
694 - Corrected treatment of the electronic noise (MMcPedestalCopy)
695
696 - Introduced MMcRunHeaders which contains monte carlo run informations
697
698 - Added a 'Print'-Task (MPrint) which calls the Print function
699 of a parameter container for each event
700
701 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
702
703 - changes to be more efficient with root 3.02/06
704
705 - root 3.02/06 fixes:
706 + the memory leak when reading MRawEvtData
707 + loosing more time than necessary to update the progress bar
708
709 - MWriteAsciiFile is now capable of writing more than one container
710 in a line. For example: To be able to write Monte Carlo and
711 Hillas values (energy and alpha) in one line.
712
713
714
715 *** Version 0.5 (2001/11/06)
716
717 - Added new GUI functionality (Analysis)
718
719 - Added a camera display to be able to display events in the camera
720 together with the calculated hillas ellipse
721
722 - Added a 'Clone'-Task (MClone) which can clone a parameter container
723 object at any state of the analysis, so that the output are several
724 states
725
726 - Fixed a bug in the collection area error calculation
727 (Thanks to Ciro and Abelardo)
728
729 - Fixed a bug which causes merpp to crash in some environments
730
731 - Implemented auto enabling scheme for Branches to speed up reading
732 a lot (see MReadTree and MTask)
733
734 - Fixed a bug in the Histogram classes which caused histograms to
735 be written to a file by MWriteRootFile without request
736
737 - changed the object I/O from the old stylish root I/O to the new
738 'auto evolution scheme' This was done only for classes which are not
739 yet used in Monte Carlo files, so that these files are still readable.
740
741 - Added support for a progress bar in MEvtLoop and MReadTree
742 (see the Analysis Window in Mars for an example)
743
744 - Fixed a bug in the package creation which disturbed the conversion
745 between a mars version unpacked from a tar file and the repository.
746
747 - Changed the code to writer merpped (converted into root format)
748 raw files, to get faster (around 10%)
749
750
751
752 *** Version 0.4 (2001/09/20)
753
754 - This release is made to compile on a root version >= 3.00
755
756 - Fixed a bug which causes MReadTree to read the first file only
757
758 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
759
760 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
761
762 - Added a task to write several container to a root file (MWriteRootFile)
763
764 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
765
766 - Added calculation of the collection area (MMcCollectionAreaCalc)
767
768 - fixed some bugs in the Hillas calculation
769
770 - added filters to be able to control the task execution dependent on
771 a parameter (for example: the number of level 1 triggers in a MC-file)
772
773
774
775 *** Version 0.3 (2001/04/23)
776
777 - Many demo macros added
778
779 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
780
781 - Hillas Calculation added
782
783 - Standard image cleaning available
784
785 - MReadTree is now able to handle more than one file
786 (Remark: of the same structure)
787
788 - Now we are able to display events in a first version of the
789 Camera event display. To do this we must run the macro
790 "macros/readCT1.C" to read data from CT1.
791
792
793
794 *** Version 0.2 (2001/01/24)
795
796 - First Implementation of a Gui to read the raw data. Start the
797 gui with the command mars.
798
799
800
801 *** Version 0.1 (2000/12/20)
802
803 - First official release 0.1
804
805 - Changes:
806
807 + changed calling style of MRawPixelIterator from do...while to
808 while-loop
809
Note: See TracBrowser for help on using the repository browser.