source: trunk/MagicSoft/Mars/NEWS@ 6893

Last change on this file since 6893 was 6892, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 29.4 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4
5 - Fix bug on the arrival time reconstruction when using Digital
6 Filter (in some marginal cases times were reconstructed shifted by one
7 or two slices)
8
9 - all executables now return 2 where in previous versions -1 has
10 been returned (gave problems with shell-scripts)
11
12 - the Hi-/Lo-Gain intercalibration for monte carlo files is now
13 also done with a intercalibration input file
14
15 - a bug in the time fine adjustment of the digital filter has been fixed
16
17 - a lot of small fixes to calling TPad::Divide with a margin==0
18
19 - MStatusDisplay now shows the memory usage
20
21 - added a memory leak statistic after the eventloop
22
23 - MHadronness replaced by MParameterD
24
25 - wobble mode can now be switched on from the data-set
26
27
28
29
30 *** Version 0.9 (2005/03/23)
31
32 - Calibration is now done autmatically into photo-electrons like
33 decided by the Collaboration Board
34
35 - Reference lines in the display can be read from resource file
36
37 - Interlaced calibration events can be handled by callisto
38
39 - Hi-Gain vs. Lo-Gain calibration constants can be calculated
40 and applied in callisto.
41
42 - class MJCalibTest can be called by callisto
43
44 - callisto can now run with three data types: rawdata, rootdata, MC
45
46 - added two classes mreport/MReportStarguider.cc and
47 mreport/MReportStarguider.h for implementing starguider-data
48
49 - the output of merpp-update now contains starguider information:
50 MReportStarguider and MTimeStarguider
51
52 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
53 values were lower than they should. This was more visible for high
54 energy (Size) events.
55
56 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
57
58 - added a new loop to callisto to support the correct extraction of
59 the pedestal and pedestal rms through the signal extractor
60
61 - added class to perform fourier tranformation of a hexagonal structure
62 (MHexagonalFT)
63
64 - added class to perform fourier tranformation of a hexagonal structure
65 in a tasklist (MHexagonalFTCalc) example: hft.C
66
67 - added class to enhance the MCerPhotEvt from the Magic camera geometry
68 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
69 small pixels, example: extendcam.C
70
71 - added possibility to write data to memory (TTree) using MWriteRootFile
72
73 - added possibility to read a TTree stored only in memory by MReadTree
74
75 - new classes to deal with the interleaved calibration events:
76 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
77
78 - implemented filters to callisto to skip calibration events
79
80 - changed callisto to calculate three kinds of pedestals and pedestal rms:
81 + fundamental pedestal (MPedPhotFundamental): extracted directly from
82 the slices by statistics
83 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
84 signal extractor without randomization
85 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
86 with the signal extractor with randomization (extraction window is
87 randomly fixed)
88 The three kind of pedestal is not yet implemented (for speed reasons) as
89 long as nobody really needs it:
90 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
91 extracted with the signal extractor with randomization
92
93 - callisto now finds the pulse position in the data automatically
94
95 - implemented data reduction in calibrated data by reducing the precision
96 of the stored floating point values (pedestal, rms and signal) to
97 roughly 0.5%
98
99 - fixed showplot to make file format conversion (eg. converting a
100 status display stored in a root file into a postscript file) in
101 batch mode possible:
102 showplot -b --save-as-ps[=outfile.ps] infile.root
103
104 - Allow class names as part of filter rules, eg
105 (MFSupercuts) && (MHillas.fSize>100)
106
107 - fixed a lot of stuff to allow all programs to process MonteCarlo
108 camera files.
109
110 - enhanced possibility to debug reading of resource file
111
112 - MDataChain should handle priorities of operator more
113 accurate now
114
115 - completely revised the container in which the signal is stored
116 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
117 * the new implementation is faster and
118 * needs less storage space
119
120 - FIRST version which can process Monte Carlos through the
121 whole chain of programs (callisto, star, etc)
122
123 - implemented new image parameters for the border length of
124 the shower image (MNewImagePar2)
125
126 - implemented wobble-mode in ganymed
127
128 - new class (MJOptimize) taking care of all optimization processes
129
130
131
132 *** Version 0.8.6 (2004/10/05)
133
134 - New combined signal and time extractor
135 MExtractTimeAndChargeDigitalFilter
136
137 - The Report for the trigger section in the CC run summary has been
138 updated, and now the IPRs (Individual Pixel Rates) are available.
139
140 - new macros for database interaction: filldotrun.C, filldotrbk.C
141
142 - added new program which can convert colored output which was redirected
143 into a file back into colored text (for example to display it with
144 more): showlog
145
146 - added new program to display an MStatusArray of plots (stored with
147 MStatusDisplay) from a file: showplot
148
149 - Added support for Sequences (MSequence). Sequences are blocks of run
150 files containing the same calibration and belonging to the same
151 source
152
153 - Added a new task (MTaskEnv) which can be used in setup files to switch
154 between different tasks (for example to choose a signal extractor)
155
156 - Implemented automatic file splitting in MWriteRootFile
157
158 - After image cleaning an island index is assigned to all used pixels.
159 The index corresponds to the order of the islands in size.
160
161 - added a cleaning which takes signal height _and_ arrival time into
162 account: probability cleaning (for more details see MImgCleanStd)
163
164 - added a cleaning which takes takes the absolute number of photons
165 times the area ratio as cleaning level
166 (for more details see MImgCleanStd)
167
168 - Changed calculation of image parameters such, that it can be done
169 for all used pixels or the pixels with a defined island index only
170
171 - implemented new image parameters displaying the number of islands,
172 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
173
174 - event display in executable changed to support also calibrated files
175 (done with MJCalibrateSignal)
176
177 - added program doing the calibration and the signal extraction
178 and signal calibration: callisto Most part of the setup is done
179 by a resource file: callisto.rc
180
181 - implemented support for pixels with negative IDs (Raw file format
182 version 4)
183
184 - implemented an new option in merpp (--auto-time) to get the time
185 range for cc and/or caco data from the run header of the raw data
186
187 - New star-program (star and MJStar). Taking calibrated data from
188 callisto/MJCalibrateSignal as input. The setup is done through
189 a resource file: star.rc
190
191 - Added possibility to setup the eventloop in the mars-executable
192 Camera Display by a resource file: mars.rc
193
194 - The the mars-executable Camera Display can now also read
195 calibrated data files written by callisto/MJCalibrateSignal
196
197 - Added a new class which can calculate the source position in
198 the camera from a pointing model known to be correct and
199 the pointing model used for observations (MSrcPosFromModel)
200
201 - added a new version of the class calculating the effective on-time
202 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
203 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
204 MHTimeDiffTheta.
205
206 - added the possibility to count how often a signal is above (or
207 below) a certain threshold in MHCamEvent and MHCamEventRot (this
208 can replace MHTriggerLvl0)
209
210 - added ore convinient ways to set the axis-titles of your histograms
211 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
212 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
213
214
215
216 *** Version 0.8.5 (2004/08/06)
217
218 - new Signal Extractors: MExtractFixedWindowSpline
219 and MExtractAmplitudeSpline
220
221 - implementes interleave in merpp to be able to merpp parts of a file
222
223 - implemented force-functionality to merpp
224
225 - star display to display star catalogs (MAstroCatalog)
226
227 - star display to 'mirror' stars to the camera (MAstroCamera)
228
229 - implemented a new cleaning option which allows cleaning scaled with
230 the real ratio of the rms depending on the pixel size, not only the
231 square root of the pixelsize (MImgCleanStd, MCameraData)
232
233 - removed obsolete MBlind* classes
234
235 - Signal extractor taking the AB flag into account implemented (this makes
236 an odd number of slices for signal extraction possible
237 (MExtractSignalABcorr)
238
239 - implemented a class extracting the pedestal from the raw-data (events)
240 itself using empty lo-gain (MpedCalcFromLoGain)
241
242 - Added mean values to MPedPhotCam
243
244 - Added Makefile for Darwin (this OS is NOT officially supported!)
245
246
247
248 *** Version 0.8.4 (2004/04/19)
249
250 - new fast arrival time extractor using cubic splines:
251 MExtractTimeFastSpline
252
253 - implementes multi-argument support in MDataChain
254 ("pow(a, b)")
255
256 - implemented double reference support in MDataChain
257 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
258
259 - added support in MF for expressiond like
260 "MHillas.fWidth<2*<MHillas.fLength"
261
262 - MDataChain is now able to support variables like [0], [1], ...
263 which can be used in fit functions as parameters. The interface
264 is implemented through the new virtual function
265 MParContainer::SetVariables
266
267 - added new class MArrivalTimeCam/MArrivalTimePix:
268 Storage containers to hold the ArrivalTime of the camera/pixel
269
270 - added new classes for the calibration of relative arrival times:
271 MCalibrationRelTimePix and MCalibrationRelTimeCam
272
273 - added new classes to extract the signal of the blind pixel and the
274 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
275
276 - added new classes for the bad-pixels treatment (MBadPixels*)
277 which are more powerfull than the old ones (MBlindPixel*)
278 and will replace them.
279
280 - added filter against cosmics: MFCosmics
281
282 - added new class MArrivalTimeCalc2:
283 Calculates the arrival time as the signal weighted mean of the time
284 slices in the maximum window
285
286 - added a new macro call pointspreadfucntion.C that fits with a 2D
287 gaussian the DC spot for an star. It gives you the RMS of
288 the PSF and the center of the star, very useful for misspointing
289 studies.
290
291 - added support for multi-telescope camera files. Added classes
292 MStereoCalc and MStereoPar, classes to calculate and store shower
293 parameters calculated from the data of two telescopes, for the MC
294 studies regarding the MAGIC clone.
295
296 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
297 MC data calibrated in photons instead of ADC counts.
298
299 - added three macros to show the calibration and analysis chain of
300 MC data. The macro starmc.C does both calibration and analysis, producing
301 an output containing Hillas parameters for each event. The macro
302 mccalibrate.C does just the calibration and writes out a file containing
303 pixel information in photons instead of FADC data. The macro starmc2.C
304 reads in such a file and produces an output with Hillas parameters.
305
306 - added MPedPhotCalc to compute pedestals in units of photons, see
307 macro pedphotcalc.C
308
309 - added all class to perform the calibration, see macro calibration.C
310
311 - added class MFFT to perform Fast Fourier Transforms
312
313 - added class MSimulatedAnnealing to perform simulated annealing
314 minimizations
315
316 - added new macro bootcampstandardanalysis.C which holds the skeleton
317 of the analysis chain discussed in the december bootcamp.
318
319 - added support for DAQ raw data file format V2
320
321 - implemented an arbitrary time stamp for the events from raw-data
322 files with file version<3. It is calculated from the run number,
323 the date of start and the FADC clock tick from the first module
324
325 - implemented the correct decoding of the event time-stamp
326 coming from the DAQ for raw-data files with file-version>2
327
328 - added a new classes storing the pedestals in units of photons:
329 MPedPhotPix, MPedPhotCam
330
331 - added support for DC current files from the camera control
332
333 - added support for start- and stop-time when merpping report files
334
335 - added MReportCC storing the weather data from the CC-REPORT
336
337 - added class to fill trainings and test matrices (MTFillMatrix)
338
339 - added a filter performing a software trigger (MFSoftwareTrigger)
340
341 - Added classes to perform parts of the standard analysis (Jobs):
342 + MJPedestals
343 + MJCalibration
344 + MJExtractSignal
345 Note: All of them are preliminary!
346
347 - Added Iterator to iterate over files giving only the run-number
348
349 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
350 the evolution of a sector vs time
351
352
353
354 *** Version 0.8.3 (2003/12/05)
355
356 - adapted Random Forest classes to allow the use with MC
357 multi-telescope files which can be produced with the coming
358 camera version 0.7.
359
360 - added classes to read and interprete central control report files
361 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
362
363 - enhanced merpp (the executable) to support .raw and .rep files.
364
365 - added classes for light calibration (MCalibration* and
366 MHCalibration*) by Markus Gaug. Further work has to be and will
367 be done soon.
368
369 - Added a preliminary 'synchronizer' (MReadReports) which will
370 replace MReadMarsFile as soon as it is finished.
371
372 - Added a tutorial macro demonstrating how report files are merpped
373 and how they can be read from the root file in the correct order
374 of time (readrep.C)
375
376 - Added a generalized histogram (similar to MH3) called MVsTime
377 which allows to plot variables (or rules - MDataChain - of
378 variables) vs time. For an example have a look at tempvstime.C.
379
380 - Changed the name of the event trees:
381 + Events --> Events
382 + PedEvents --> Pedestals
383 + CalEvents --> Calibration
384
385 - changed name of MTime in the event trees from MRawEvtTime to MTime
386
387 - added displaying the sector indices to the mars event display
388
389 - Magic Online Analysis (MOnA) implemented in a first version
390 (see mona.cc, MOnlineDump and MOnlineDisplay)
391
392 - added classes to calculate event rate
393 (preliminary: MEventRateCalc, MEventRate)
394
395 - added new executable 'readdaq' to read *.raw files from the DAQ directly
396
397 - added classes dealing with the telescope pointing position (MPointing*)
398
399 - implemented the 'final' Mars time stamp based on some experiences with
400 the new 'Synchonizer'
401
402
403
404 *** Version 0.8.2 (2003/11/10)
405
406 - accelerated standard analysis by a factor of 6-8 ...
407 + doing precalculations in MGeomCam for the pixel area ratio
408 + creating a look up table for the single pixels in MCerPhotEvt
409
410 - added task to calculates weights in case you want to 'change'
411 the energy spectrum of a monte carlo file
412 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
413
414 - added a new executable star which implements the
415 star.C macro as precompiled executable. Currently a flexible
416 setup is not possible, but a 'input card' setup will follow.
417
418 - Starting to implement Multi-Telescope-Support based on the
419 upcomming camera version 0.7. The base for a general support
420 is implemented and the star-functionality is proven to work.
421
422 - Replaced Event-Display in and Camera-Display in the Mars GUI
423 executable by a more convinient display base on MStatusDisplay.
424
425 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
426
427
428
429 *** Version 0.8.1 (2003/10/20)
430
431 - added signal subtraction for pure on data by means of fitting
432 the background in the off region or by performing a combined
433 signal/background fit. Provides necessary histograms for
434 obtaining energy spectra and a light curve.
435
436 - added classes to perform and study the selection of the
437 2nd Level Trigger on MC data (example in triglvl2.C macro)
438
439 - added pedestal calculation
440
441 - implemented "democratic cleaning" (tail cut value proportional
442 to pixel area) according to Wolfgang's suggestion.
443
444 - added Sigmabar treatment (calculation and basic histogramming)
445
446 - added basic routines to apply padding
447
448 - added first implementation of MARS-based source visibility plotter
449 (needs to be linked against slalib, preliminary version)
450
451 - enhanced functionality of data chains: random numbers, conversion
452 functions and access to MHMatrix objects
453
454 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
455 numbers under certain circumstances (runs with 0 events included)
456
457 - fixed a bug in the general filter MF (didn't work on some systems
458 at all)
459
460 - fixed a bug in chaining files, which caused the analysis to crash or
461 ignore files
462
463 - implemented more geometry classes describing the parameters used
464 to simulate the PMT camera
465
466 - added new Monte Carlo classes containing the setup of the different
467 programs in the MC chain.
468
469 - added a (preliminary) general task to evaluate chi-square of a given
470 parameter in an eventloop.
471
472 - first implementation of a container describing the observatory
473 location (Long, Lat, etc)
474
475 - added Random Forest - method for g/h-separation
476
477 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
478 (this means, that it is compiling, but not yet fully tested)
479
480 - added a new status display which can show the present status
481 of histograms while an eventloop is running (MStatusDisplay,
482 an example can be found at status.C)
483
484 - reorganized directories:
485 classes describing the image --> mimage
486 classes containing Monte Carlo Histograms --> mhistmc
487 classes for Random Forest method --> mranforest
488
489 - added (event-)weights to fill histograms
490
491 - colors in logging output to screen
492
493 - changes to the Image Parameter declaration:
494 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
495 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
496 + MHillasExt now derives from MParContainer instead of MHillas
497 --> Files written with the old definition are more or less unreadable
498
499 - reading of reflector files
500
501 - display data from reflector files in the camera
502
503 - implemented currents (and display them in the camera)
504
505 - logarithmic scale in camera
506
507 - added class to iterate through directory contents (MDirIter)
508
509
510
511 *** Version 0.8 (2002/11/18)
512
513 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
514
515 - corrected 48(!) wrong entries in the Next Neighbor table of the
516 Magic Camera (all in the inner part of the outer ring, mostly
517 missing a single NN)
518
519 - Fixed a bug in the table describing the Next Neighbours of the
520 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
521 have any neighbour)
522
523 - changed trigrate.C: now it calculates the pure NSB triggers from
524 a camera file (generated with no showers), so there is no need
525 to introduce them by hand in the BgR array (for more details
526 please ask Abelardo)
527
528 - added MHHadronness (and MHadronness) as a general facility to evaluate
529 the quality of a gamma-hadron seperation method
530
531 - changed MWriteAsciiFile to accept rules (MDataChain)
532
533 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
534 must be replaced by calles to MWriteAsciiFile::AddColumn and
535 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
536 changed.
537
538 - Implemented generalized event-matrices (one row per event)
539 (MHMatrix)
540
541 - implemented the one dimensional composite probabilities
542 (MHCompProb, MCompProbCalc, comprob.C)
543
544 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
545 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
546
547 - Added a camera display displaying the pixel numbers to the
548 event display gui.
549
550 - Added Monte Carlo Informations to event display gui
551
552 - Changed the camera display to display the pixel numbering
553
554 - Added three buttons to the camera display to change the palette
555
556 - Added the number of used and core pixels after image cleaning
557 to MHillas
558
559 - Changed the algorithm used in MHillas according to TDAS 02-03
560
561 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
562
563 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
564
565 - Added fCosDeltaAlpha to MHillasSrc
566
567 - The numbers of photons used to calculate fConc and fConc1 in
568 MHillasExt are now scaled with the pixel size, so that one get
569 a four times smaller value for the bigger pixels in the outer ring.
570
571 - added new task to smooth the camera contents (MCameraSmooth)
572
573 - added possibility to use interpolated pixel values for blind pixels
574 instead of removing it completely from the analysis
575
576 - Implemented the possibility to save the whole eventloop with
577 its setup to a file. This information can be read and from
578 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
579 and MEvtLoop::MakeMacro. If you find something not working, please
580 report - this stuff is still in a beta phase.
581
582 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
583 file having crab starfield, but also for all following files - fixed
584
585 - MTaskList::PrintStatistics can now be instructud to print also the
586 title, too: use PrintStatistics(0, kTRUE)
587
588 - Changed the image cleaning so that pixels with to many 'used'
589 neighbors are left used (to get rid of 'holes' in events)
590
591 - Introduced more output to the camera displays
592
593 - Added an array of histograms (eg one hist per run), MHArray
594
595 - Added a _preliminary_ version of the reader for CT1 PreProc files
596 (MCT1ReadPreProc)
597
598 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
599 (thanks to Raquel)
600
601 - added the first energy estimator (MEnergyEstParam, estimate.C,
602 estfit.C) using a parametrization
603
604 - Added some new Monte Carlo paremeter containers used to store
605 setup information from the MC chain (MMcConfigRunHeader,
606 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
607
608
609
610 *** Version 0.7 (2002/04/30)
611
612 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
613 the pedestal mean value was saved incorrectly. For files from
614 this versions we substract 0.5 from the pedestal mean.
615 WARNING: This may effect your results, so don't wonder...
616
617 - First implementation of an algorithm using only triggered events
618 for the collection area calculation
619
620 - Ascii Output can now also be used for parameter containers which
621 doesn't overload MParCointainer::AsciiWrite
622
623 - The Ascii Output is now also capable of writing single data members
624 of one container
625
626 - You are now able to change the order of the values written to the
627 ascii file
628
629 - You can now specify a conversion factor for each data member written
630 to an ascii file. This may be usefull to change the units of the
631 data member (eg. degrees instead of millimeters in case of the
632 hillas parameters)
633
634 - Replaced old MHillas by a new structure which allows you to extend
635 the parameters stored in MHillas very easily:
636 see MHillas and MHillasExt
637
638 - Added classes to handle source dependancy of image parameters:
639 see MHillasSrc
640
641 - Added container (MBinning) to have a standard input for the binning
642 in different histograms (eg. the Energy bins should be the same in
643 all histograms)
644
645 - Changed Hillas histograms from mm to deg
646
647 - Added the flexible binning to the hillas histograms
648
649 - Added a filter for the alpha parameter (MFAlpha)
650
651 - It is now possible to write single data members of a class object to
652 an output stream instead of the whole container only
653
654 - Added a generalized filter for a data member:
655 MFDataMember filter("MHillas.fWidth", '<', 0.5);
656
657 - Added a generalized Filter parser for more difficult filter rules
658 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
659
660 - Added new Monte Carlo histograms:
661 MHMcEnergyImpact and MHMcEfficiency
662
663 - Added many new histograms needed for the flux calculation.
664
665 - Added a generalized histograms which can fill and show up to three
666 data members in either a one-, two- or three-dimensional histogram, eg:
667 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
668
669 - Added:
670 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
671 * calculation of <Theta> as a function of time (MHThetabarTime)
672 they are needed in the flux calculation in
673 order to select for a given bin in Theta (or time) the appropriate
674 effective collection area, which is assumed to be given as a function
675 of Theta and the true energy
676
677 - Added calculation of the migration matrix in the energy
678 (MHMcEnergyMigration):
679 the migration matrix describes the migration from the true (E_true)
680 to the estimated energy (E_est); it is needed to determine the
681 distribution of E_true from the measured distribution of E_est
682 by unfolding
683
684 - changed the color palette in the camera display to DeapSea.
685
686
687
688 *** Version 0.6 (2002/01/15)
689
690 - Introduce the option of disable pixels (MBlindPixels and
691 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
692 able to deal with Star Field NSB.
693
694 - Fixed a bug in the pedestals substraction
695
696 - Introduced verbosity levels
697
698 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
699
700 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
701 work correctly (thanks to Abelardo)
702
703 - Introduced correct treatment of the diffuse Night Sky Background
704 and NSB (MMcPedestalNSB)
705
706 - Corrected treatment of the electronic noise (MMcPedestalCopy)
707
708 - Introduced MMcRunHeaders which contains monte carlo run informations
709
710 - Added a 'Print'-Task (MPrint) which calls the Print function
711 of a parameter container for each event
712
713 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
714
715 - changes to be more efficient with root 3.02/06
716
717 - root 3.02/06 fixes:
718 + the memory leak when reading MRawEvtData
719 + loosing more time than necessary to update the progress bar
720
721 - MWriteAsciiFile is now capable of writing more than one container
722 in a line. For example: To be able to write Monte Carlo and
723 Hillas values (energy and alpha) in one line.
724
725
726
727 *** Version 0.5 (2001/11/06)
728
729 - Added new GUI functionality (Analysis)
730
731 - Added a camera display to be able to display events in the camera
732 together with the calculated hillas ellipse
733
734 - Added a 'Clone'-Task (MClone) which can clone a parameter container
735 object at any state of the analysis, so that the output are several
736 states
737
738 - Fixed a bug in the collection area error calculation
739 (Thanks to Ciro and Abelardo)
740
741 - Fixed a bug which causes merpp to crash in some environments
742
743 - Implemented auto enabling scheme for Branches to speed up reading
744 a lot (see MReadTree and MTask)
745
746 - Fixed a bug in the Histogram classes which caused histograms to
747 be written to a file by MWriteRootFile without request
748
749 - changed the object I/O from the old stylish root I/O to the new
750 'auto evolution scheme' This was done only for classes which are not
751 yet used in Monte Carlo files, so that these files are still readable.
752
753 - Added support for a progress bar in MEvtLoop and MReadTree
754 (see the Analysis Window in Mars for an example)
755
756 - Fixed a bug in the package creation which disturbed the conversion
757 between a mars version unpacked from a tar file and the repository.
758
759 - Changed the code to writer merpped (converted into root format)
760 raw files, to get faster (around 10%)
761
762
763
764 *** Version 0.4 (2001/09/20)
765
766 - This release is made to compile on a root version >= 3.00
767
768 - Fixed a bug which causes MReadTree to read the first file only
769
770 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
771
772 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
773
774 - Added a task to write several container to a root file (MWriteRootFile)
775
776 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
777
778 - Added calculation of the collection area (MMcCollectionAreaCalc)
779
780 - fixed some bugs in the Hillas calculation
781
782 - added filters to be able to control the task execution dependent on
783 a parameter (for example: the number of level 1 triggers in a MC-file)
784
785
786
787 *** Version 0.3 (2001/04/23)
788
789 - Many demo macros added
790
791 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
792
793 - Hillas Calculation added
794
795 - Standard image cleaning available
796
797 - MReadTree is now able to handle more than one file
798 (Remark: of the same structure)
799
800 - Now we are able to display events in a first version of the
801 Camera event display. To do this we must run the macro
802 "macros/readCT1.C" to read data from CT1.
803
804
805
806 *** Version 0.2 (2001/01/24)
807
808 - First Implementation of a Gui to read the raw data. Start the
809 gui with the command mars.
810
811
812
813 *** Version 0.1 (2000/12/20)
814
815 - First official release 0.1
816
817 - Changes:
818
819 + changed calling style of MRawPixelIterator from do...while to
820 while-loop
821
Note: See TracBrowser for help on using the repository browser.