source: trunk/MagicSoft/Mars/NEWS@ 6965

Last change on this file since 6965 was 6964, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 32.0 KB
Line 
1 -*-*- END -*-*-
2 *** Version <cvs>
3
4 - added a full featured spectrum program (sponde) which reads
5 ganymed output and monte carlos and compiles a spectrum
6
7 - added new histograms for image parameters versus size (MHVsSize)
8
9 - support for cc file versions newer than V200504130. Added
10 support for active loads (MCameraActiveLoad) and central pixel
11 (MCameraCentralPixel)
12
13 - fixed a bug in the recognition of the calibration bit pattern.
14 Concerns only intensity calibration. (The strength of the
15 intensity has been updated in some cases)
16
17 - add a filter against PIN Diode events when running over calibration
18 runs since some of the recent calibration runs have been taken
19 with Pin Diode.
20
21 - Changed the default paths for calibrated data and image files.
22 (The implemented access to these files doesn't yet exist)
23
24
25
26 *** Version 0.9.1 (2005/04/14)
27
28 - Fix bug on the arrival time reconstruction when using Digital
29 Filter (in some marginal cases (10%) times were reconstructed shifted
30 by 0.2 slices)
31
32 - all executables now return 2 where in previous versions -1 has
33 been returned (gave problems with shell-scripts)
34
35 - the Hi-/Lo-Gain intercalibration for monte carlo files is now
36 also done with a intercalibration input file
37
38 - a bug in the time fine adjustment of the digital filter has been fixed
39
40 - a lot of small fixes to calling TPad::Divide with a margin==0
41
42 - MStatusDisplay now shows the memory usage
43
44 - added a memory leak statistic after the eventloop
45
46 - MHadronness replaced by MParameterD
47
48 - MEnergyEst replaced by MParameterD
49
50 - wobble mode can now be switched on from the data-set
51
52 - switched on bad pixel detection for a pedestal level
53 which is more than 5 times the variance
54
55 - Fixed default paths to be correct for the new data center
56
57 - Fixed handling of drive data. The pointing position in now
58 copied to MPointingPos inside star for real and MC events
59
60 - made sure, that the sequences in a dataset are sorted by
61 their number to ensure the correct synchronization
62
63 - added all resource files necessary to handle spline extraction
64 of signal for the late 2004 and the early 2005 data
65
66 - update the reference lines for the december data
67
68 - changed default for fgHiGainFirst from 2 to 0 in spline extractor
69 This is important for the Dec. and Jan. data where the calibration
70 pulse position changes much.
71
72 - changed default for fgOffsetFromLogain from -1.8 to -2.8 in digital
73 filter. This corrects only an defective extraction of the MC at low-gain
74 signals lower than 90 phes.
75
76 - fixed some slowdown in calibrating data with interleaved events from
77 Jan and Dec. As a workaround made the pretty palette the default.
78 The inverse Deep Blue Sea has a bug which slows down long calibration
79 runs a lot.
80
81 - implemented new values from new starguider report as defined
82 in TDAS00-07 V7.1 (eg SkyBrighness)
83
84 - Fixed the formerly wrong unit of azimuth and zenith angle deviation
85 in starguider report (If you merpp the same reports with this version
86 you'll get the correct units (arcmin) but a different result
87 than with old versions (wrong units))
88
89 - Now the status display can also write PNG, JPEG and XPM (other file
90 formats are still unsupported by root)
91
92 - added a lot of scripts and macros in directory datacenter used
93 for automatic processing
94
95
96
97 *** Version 0.9 (2005/03/23)
98
99 - Calibration is now done autmatically into photo-electrons like
100 decided by the Collaboration Board
101
102 - Reference lines in the display can be read from resource file
103
104 - Interlaced calibration events can be handled by callisto
105
106 - Hi-Gain vs. Lo-Gain calibration constants can be calculated
107 and applied in callisto.
108
109 - class MJCalibTest can be called by callisto
110
111 - callisto can now run with three data types: rawdata, rootdata, MC
112
113 - added two classes mreport/MReportStarguider.cc and
114 mreport/MReportStarguider.h for implementing starguider-data
115
116 - the output of merpp-update now contains starguider information:
117 MReportStarguider and MTimeStarguider
118
119 - Fixed bug in MHHadronness.cc which made that the displayed Q-factor
120 values were lower than they should. This was more visible for high
121 energy (Size) events.
122
123 - Made MExtractTimeAndChargeDigitalFilter the default for callisto
124
125 - added a new loop to callisto to support the correct extraction of
126 the pedestal and pedestal rms through the signal extractor
127
128 - added class to perform fourier tranformation of a hexagonal structure
129 (MHexagonalFT)
130
131 - added class to perform fourier tranformation of a hexagonal structure
132 in a tasklist (MHexagonalFTCalc) example: hft.C
133
134 - added class to enhance the MCerPhotEvt from the Magic camera geometry
135 MGeomCamMagic to a enhanced geometry MGeomCamMagicXT having only
136 small pixels, example: extendcam.C
137
138 - added possibility to write data to memory (TTree) using MWriteRootFile
139
140 - added possibility to read a TTree stored only in memory by MReadTree
141
142 - new classes to deal with the interleaved calibration events:
143 MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern
144
145 - implemented filters to callisto to skip calibration events
146
147 - changed callisto to calculate three kinds of pedestals and pedestal rms:
148 + fundamental pedestal (MPedPhotFundamental): extracted directly from
149 the slices by statistics
150 + pedestal from extractor (MPedPhotFromExtractor): extracted with the
151 signal extractor without randomization
152 + random pedestal from extractor (MPedPhotFromExtractorRndm): extracted
153 with the signal extractor with randomization (extraction window is
154 randomly fixed)
155 The three kind of pedestal is not yet implemented (for speed reasons) as
156 long as nobody really needs it:
157 + pedestal from extractor with randomizatiuon (MPedPhotFromExtractorRndm):
158 extracted with the signal extractor with randomization
159
160 - callisto now finds the pulse position in the data automatically
161
162 - implemented data reduction in calibrated data by reducing the precision
163 of the stored floating point values (pedestal, rms and signal) to
164 roughly 0.5%
165
166 - fixed showplot to make file format conversion (eg. converting a
167 status display stored in a root file into a postscript file) in
168 batch mode possible:
169 showplot -b --save-as-ps[=outfile.ps] infile.root
170
171 - Allow class names as part of filter rules, eg
172 (MFSupercuts) && (MHillas.fSize>100)
173
174 - fixed a lot of stuff to allow all programs to process MonteCarlo
175 camera files.
176
177 - enhanced possibility to debug reading of resource file
178
179 - MDataChain should handle priorities of operator more
180 accurate now
181
182 - completely revised the container in which the signal is stored
183 MCerPhotEvt/Pix, MArrivalTime --> MSignalCam/Pix
184 * the new implementation is faster and
185 * needs less storage space
186
187 - FIRST version which can process Monte Carlos through the
188 whole chain of programs (callisto, star, etc)
189
190 - implemented new image parameters for the border length of
191 the shower image (MNewImagePar2)
192
193 - implemented wobble-mode in ganymed
194
195 - new class (MJOptimize) taking care of all optimization processes
196
197
198
199 *** Version 0.8.6 (2004/10/05)
200
201 - New combined signal and time extractor
202 MExtractTimeAndChargeDigitalFilter
203
204 - The Report for the trigger section in the CC run summary has been
205 updated, and now the IPRs (Individual Pixel Rates) are available.
206
207 - new macros for database interaction: filldotrun.C, filldotrbk.C
208
209 - added new program which can convert colored output which was redirected
210 into a file back into colored text (for example to display it with
211 more): showlog
212
213 - added new program to display an MStatusArray of plots (stored with
214 MStatusDisplay) from a file: showplot
215
216 - Added support for Sequences (MSequence). Sequences are blocks of run
217 files containing the same calibration and belonging to the same
218 source
219
220 - Added a new task (MTaskEnv) which can be used in setup files to switch
221 between different tasks (for example to choose a signal extractor)
222
223 - Implemented automatic file splitting in MWriteRootFile
224
225 - After image cleaning an island index is assigned to all used pixels.
226 The index corresponds to the order of the islands in size.
227
228 - added a cleaning which takes signal height _and_ arrival time into
229 account: probability cleaning (for more details see MImgCleanStd)
230
231 - added a cleaning which takes takes the absolute number of photons
232 times the area ratio as cleaning level
233 (for more details see MImgCleanStd)
234
235 - Changed calculation of image parameters such, that it can be done
236 for all used pixels or the pixels with a defined island index only
237
238 - implemented new image parameters displaying the number of islands,
239 saturated hi-gain and lo-gain pixels (MImagePar, MHImagePar)
240
241 - event display in executable changed to support also calibrated files
242 (done with MJCalibrateSignal)
243
244 - added program doing the calibration and the signal extraction
245 and signal calibration: callisto Most part of the setup is done
246 by a resource file: callisto.rc
247
248 - implemented support for pixels with negative IDs (Raw file format
249 version 4)
250
251 - implemented an new option in merpp (--auto-time) to get the time
252 range for cc and/or caco data from the run header of the raw data
253
254 - New star-program (star and MJStar). Taking calibrated data from
255 callisto/MJCalibrateSignal as input. The setup is done through
256 a resource file: star.rc
257
258 - Added possibility to setup the eventloop in the mars-executable
259 Camera Display by a resource file: mars.rc
260
261 - The the mars-executable Camera Display can now also read
262 calibrated data files written by callisto/MJCalibrateSignal
263
264 - Added a new class which can calculate the source position in
265 the camera from a pointing model known to be correct and
266 the pointing model used for observations (MSrcPosFromModel)
267
268 - added a new version of the class calculating the effective on-time
269 MHEffectiveOnTime. It unifies the old classes MHEffOnTime,
270 MHEffOnTimeTime, MHEffOnTimeTheta, MHTimeDiff, MHTimeDiffTime and
271 MHTimeDiffTheta.
272
273 - added the possibility to count how often a signal is above (or
274 below) a certain threshold in MHCamEvent and MHCamEventRot (this
275 can replace MHTriggerLvl0)
276
277 - added ore convinient ways to set the axis-titles of your histograms
278 in your macro to some MH-classes like: MH3, MHVsTime, MHSectorVsTime,
279 MHPixVsTime, MHVsTime, MHCamEvent and MHCamEventRot
280
281
282
283 *** Version 0.8.5 (2004/08/06)
284
285 - new Signal Extractors: MExtractFixedWindowSpline
286 and MExtractAmplitudeSpline
287
288 - implementes interleave in merpp to be able to merpp parts of a file
289
290 - implemented force-functionality to merpp
291
292 - star display to display star catalogs (MAstroCatalog)
293
294 - star display to 'mirror' stars to the camera (MAstroCamera)
295
296 - implemented a new cleaning option which allows cleaning scaled with
297 the real ratio of the rms depending on the pixel size, not only the
298 square root of the pixelsize (MImgCleanStd, MCameraData)
299
300 - removed obsolete MBlind* classes
301
302 - Signal extractor taking the AB flag into account implemented (this makes
303 an odd number of slices for signal extraction possible
304 (MExtractSignalABcorr)
305
306 - implemented a class extracting the pedestal from the raw-data (events)
307 itself using empty lo-gain (MpedCalcFromLoGain)
308
309 - Added mean values to MPedPhotCam
310
311 - Added Makefile for Darwin (this OS is NOT officially supported!)
312
313
314
315 *** Version 0.8.4 (2004/04/19)
316
317 - new fast arrival time extractor using cubic splines:
318 MExtractTimeFastSpline
319
320 - implementes multi-argument support in MDataChain
321 ("pow(a, b)")
322
323 - implemented double reference support in MDataChain
324 ("MCameraLV.fPowerSupplyA.fVoltagePos5V")
325
326 - added support in MF for expressiond like
327 "MHillas.fWidth<2*<MHillas.fLength"
328
329 - MDataChain is now able to support variables like [0], [1], ...
330 which can be used in fit functions as parameters. The interface
331 is implemented through the new virtual function
332 MParContainer::SetVariables
333
334 - added new class MArrivalTimeCam/MArrivalTimePix:
335 Storage containers to hold the ArrivalTime of the camera/pixel
336
337 - added new classes for the calibration of relative arrival times:
338 MCalibrationRelTimePix and MCalibrationRelTimeCam
339
340 - added new classes to extract the signal of the blind pixel and the
341 PIN Diode separately: MExtractBlindPixel and MExtractPINDiode
342
343 - added new classes for the bad-pixels treatment (MBadPixels*)
344 which are more powerfull than the old ones (MBlindPixel*)
345 and will replace them.
346
347 - added filter against cosmics: MFCosmics
348
349 - added new class MArrivalTimeCalc2:
350 Calculates the arrival time as the signal weighted mean of the time
351 slices in the maximum window
352
353 - added a new macro call pointspreadfucntion.C that fits with a 2D
354 gaussian the DC spot for an star. It gives you the RMS of
355 the PSF and the center of the star, very useful for misspointing
356 studies.
357
358 - added support for multi-telescope camera files. Added classes
359 MStereoCalc and MStereoPar, classes to calculate and store shower
360 parameters calculated from the data of two telescopes, for the MC
361 studies regarding the MAGIC clone.
362
363 - added MMcCalibrationCalc, MMcCalibrationUpdate, classes to obtain
364 MC data calibrated in photons instead of ADC counts.
365
366 - added three macros to show the calibration and analysis chain of
367 MC data. The macro starmc.C does both calibration and analysis, producing
368 an output containing Hillas parameters for each event. The macro
369 mccalibrate.C does just the calibration and writes out a file containing
370 pixel information in photons instead of FADC data. The macro starmc2.C
371 reads in such a file and produces an output with Hillas parameters.
372
373 - added MPedPhotCalc to compute pedestals in units of photons, see
374 macro pedphotcalc.C
375
376 - added all class to perform the calibration, see macro calibration.C
377
378 - added class MFFT to perform Fast Fourier Transforms
379
380 - added class MSimulatedAnnealing to perform simulated annealing
381 minimizations
382
383 - added new macro bootcampstandardanalysis.C which holds the skeleton
384 of the analysis chain discussed in the december bootcamp.
385
386 - added support for DAQ raw data file format V2
387
388 - implemented an arbitrary time stamp for the events from raw-data
389 files with file version<3. It is calculated from the run number,
390 the date of start and the FADC clock tick from the first module
391
392 - implemented the correct decoding of the event time-stamp
393 coming from the DAQ for raw-data files with file-version>2
394
395 - added a new classes storing the pedestals in units of photons:
396 MPedPhotPix, MPedPhotCam
397
398 - added support for DC current files from the camera control
399
400 - added support for start- and stop-time when merpping report files
401
402 - added MReportCC storing the weather data from the CC-REPORT
403
404 - added class to fill trainings and test matrices (MTFillMatrix)
405
406 - added a filter performing a software trigger (MFSoftwareTrigger)
407
408 - Added classes to perform parts of the standard analysis (Jobs):
409 + MJPedestals
410 + MJCalibration
411 + MJExtractSignal
412 Note: All of them are preliminary!
413
414 - Added Iterator to iterate over files giving only the run-number
415
416 - Added class (MHSectorVsTime) and example (sectorvstime.C) to plot
417 the evolution of a sector vs time
418
419
420
421 *** Version 0.8.3 (2003/12/05)
422
423 - adapted Random Forest classes to allow the use with MC
424 multi-telescope files which can be produced with the coming
425 camera version 0.7.
426
427 - added classes to read and interprete central control report files
428 (Directory: mreport, Base-Class: MReport, Reader: MReportFileRead, ...)
429
430 - enhanced merpp (the executable) to support .raw and .rep files.
431
432 - added classes for light calibration (MCalibration* and
433 MHCalibration*) by Markus Gaug. Further work has to be and will
434 be done soon.
435
436 - Added a preliminary 'synchronizer' (MReadReports) which will
437 replace MReadMarsFile as soon as it is finished.
438
439 - Added a tutorial macro demonstrating how report files are merpped
440 and how they can be read from the root file in the correct order
441 of time (readrep.C)
442
443 - Added a generalized histogram (similar to MH3) called MVsTime
444 which allows to plot variables (or rules - MDataChain - of
445 variables) vs time. For an example have a look at tempvstime.C.
446
447 - Changed the name of the event trees:
448 + Events --> Events
449 + PedEvents --> Pedestals
450 + CalEvents --> Calibration
451
452 - changed name of MTime in the event trees from MRawEvtTime to MTime
453
454 - added displaying the sector indices to the mars event display
455
456 - Magic Online Analysis (MOnA) implemented in a first version
457 (see mona.cc, MOnlineDump and MOnlineDisplay)
458
459 - added classes to calculate event rate
460 (preliminary: MEventRateCalc, MEventRate)
461
462 - added new executable 'readdaq' to read *.raw files from the DAQ directly
463
464 - added classes dealing with the telescope pointing position (MPointing*)
465
466 - implemented the 'final' Mars time stamp based on some experiences with
467 the new 'Synchonizer'
468
469
470
471 *** Version 0.8.2 (2003/11/10)
472
473 - accelerated standard analysis by a factor of 6-8 ...
474 + doing precalculations in MGeomCam for the pixel area ratio
475 + creating a look up table for the single pixels in MCerPhotEvt
476
477 - added task to calculates weights in case you want to 'change'
478 the energy spectrum of a monte carlo file
479 (MMcWeightEnergySpecCalc - Great work from Marcos Lopez Moya)
480
481 - added a new executable star which implements the
482 star.C macro as precompiled executable. Currently a flexible
483 setup is not possible, but a 'input card' setup will follow.
484
485 - Starting to implement Multi-Telescope-Support based on the
486 upcomming camera version 0.7. The base for a general support
487 is implemented and the star-functionality is proven to work.
488
489 - Replaced Event-Display in and Camera-Display in the Mars GUI
490 executable by a more convinient display base on MStatusDisplay.
491
492 - fixed the algorithm for the blind pixel treatment (MBlindPixelCalc)
493
494
495
496 *** Version 0.8.1 (2003/10/20)
497
498 - added signal subtraction for pure on data by means of fitting
499 the background in the off region or by performing a combined
500 signal/background fit. Provides necessary histograms for
501 obtaining energy spectra and a light curve.
502
503 - added classes to perform and study the selection of the
504 2nd Level Trigger on MC data (example in triglvl2.C macro)
505
506 - added pedestal calculation
507
508 - implemented "democratic cleaning" (tail cut value proportional
509 to pixel area) according to Wolfgang's suggestion.
510
511 - added Sigmabar treatment (calculation and basic histogramming)
512
513 - added basic routines to apply padding
514
515 - added first implementation of MARS-based source visibility plotter
516 (needs to be linked against slalib, preliminary version)
517
518 - enhanced functionality of data chains: random numbers, conversion
519 functions and access to MHMatrix objects
520
521 - fixed some bugs in the CT1 Preproc file reader, which gave wrong
522 numbers under certain circumstances (runs with 0 events included)
523
524 - fixed a bug in the general filter MF (didn't work on some systems
525 at all)
526
527 - fixed a bug in chaining files, which caused the analysis to crash or
528 ignore files
529
530 - implemented more geometry classes describing the parameters used
531 to simulate the PMT camera
532
533 - added new Monte Carlo classes containing the setup of the different
534 programs in the MC chain.
535
536 - added a (preliminary) general task to evaluate chi-square of a given
537 parameter in an eventloop.
538
539 - first implementation of a container describing the observatory
540 location (Long, Lat, etc)
541
542 - added Random Forest - method for g/h-separation
543
544 - made compatible with the latest PRO version of root (3.04/02 and 3.05/07)
545 (this means, that it is compiling, but not yet fully tested)
546
547 - added a new status display which can show the present status
548 of histograms while an eventloop is running (MStatusDisplay,
549 an example can be found at status.C)
550
551 - reorganized directories:
552 classes describing the image --> mimage
553 classes containing Monte Carlo Histograms --> mhistmc
554 classes for Random Forest method --> mranforest
555
556 - added (event-)weights to fill histograms
557
558 - colors in logging output to screen
559
560 - changes to the Image Parameter declaration:
561 + moved fConc, fConc1 from MHillasSrc to MNewImagePar
562 + moved fNumUsedPix, fNumCorePix from MHillas to MNewImagePar
563 + MHillasExt now derives from MParContainer instead of MHillas
564 --> Files written with the old definition are more or less unreadable
565
566 - reading of reflector files
567
568 - display data from reflector files in the camera
569
570 - implemented currents (and display them in the camera)
571
572 - logarithmic scale in camera
573
574 - added class to iterate through directory contents (MDirIter)
575
576
577
578 *** Version 0.8 (2002/11/18)
579
580 - added all subdirectories as Include-Paths for ACLIC (s. rootlogon.C)
581
582 - corrected 48(!) wrong entries in the Next Neighbor table of the
583 Magic Camera (all in the inner part of the outer ring, mostly
584 missing a single NN)
585
586 - Fixed a bug in the table describing the Next Neighbours of the
587 CT1 camera (a pixel 127 doesn't exist and the pixel 126 didn't
588 have any neighbour)
589
590 - changed trigrate.C: now it calculates the pure NSB triggers from
591 a camera file (generated with no showers), so there is no need
592 to introduce them by hand in the BgR array (for more details
593 please ask Abelardo)
594
595 - added MHHadronness (and MHadronness) as a general facility to evaluate
596 the quality of a gamma-hadron seperation method
597
598 - changed MWriteAsciiFile to accept rules (MDataChain)
599
600 - Calls to MWriteAsciiFile::AddContainer and MWriteAsciiFile::AddRule
601 must be replaced by calles to MWriteAsciiFile::AddColumn and
602 MWriteAsciiFile::AddColumns. Be carefull, the arguments have slightly
603 changed.
604
605 - Implemented generalized event-matrices (one row per event)
606 (MHMatrix)
607
608 - implemented the one dimensional composite probabilities
609 (MHCompProb, MCompProbCalc, comprob.C)
610
611 - implemented the Multidimensional Distances (Next Neighbours, Kernel)
612 (MMultiDimDistCalc, multidimdist.C, multidimdist2.C, MHMatrix)
613
614 - Added a camera display displaying the pixel numbers to the
615 event display gui.
616
617 - Added Monte Carlo Informations to event display gui
618
619 - Changed the camera display to display the pixel numbering
620
621 - Added three buttons to the camera display to change the palette
622
623 - Added the number of used and core pixels after image cleaning
624 to MHillas
625
626 - Changed the algorithm used in MHillas according to TDAS 02-03
627
628 - Changed the Alpha range according to TDAS 02-03 to [-90°,90°]
629
630 - Changed the algorithm used in MHillasSrc according to TDAS 02-03
631
632 - Added fCosDeltaAlpha to MHillasSrc
633
634 - The numbers of photons used to calculate fConc and fConc1 in
635 MHillasExt are now scaled with the pixel size, so that one get
636 a four times smaller value for the bigger pixels in the outer ring.
637
638 - added new task to smooth the camera contents (MCameraSmooth)
639
640 - added possibility to use interpolated pixel values for blind pixels
641 instead of removing it completely from the analysis
642
643 - Implemented the possibility to save the whole eventloop with
644 its setup to a file. This information can be read and from
645 it you can (re)create a Macro. See MEvtLoop::Read, MEvtLoop::Write
646 and MEvtLoop::MakeMacro. If you find something not working, please
647 report - this stuff is still in a beta phase.
648
649 - MBlindPixelCalc set all Ceta-Tauri pixels to unused not only for the
650 file having crab starfield, but also for all following files - fixed
651
652 - MTaskList::PrintStatistics can now be instructud to print also the
653 title, too: use PrintStatistics(0, kTRUE)
654
655 - Changed the image cleaning so that pixels with to many 'used'
656 neighbors are left used (to get rid of 'holes' in events)
657
658 - Introduced more output to the camera displays
659
660 - Added an array of histograms (eg one hist per run), MHArray
661
662 - Added a _preliminary_ version of the reader for CT1 PreProc files
663 (MCT1ReadPreProc)
664
665 - Fixed the error calculation of MHMCollectionArea and MHMcIntRate
666 (thanks to Raquel)
667
668 - added the first energy estimator (MEnergyEstParam, estimate.C,
669 estfit.C) using a parametrization
670
671 - Added some new Monte Carlo paremeter containers used to store
672 setup information from the MC chain (MMcConfigRunHeader,
673 MMcCorsikaRunHeader, MGeomPMT, MGeomMirror)
674
675
676
677 *** Version 0.7 (2002/04/30)
678
679 - added a bugfix to MCerPhotCalc. In older camera versions (<=40)
680 the pedestal mean value was saved incorrectly. For files from
681 this versions we substract 0.5 from the pedestal mean.
682 WARNING: This may effect your results, so don't wonder...
683
684 - First implementation of an algorithm using only triggered events
685 for the collection area calculation
686
687 - Ascii Output can now also be used for parameter containers which
688 doesn't overload MParCointainer::AsciiWrite
689
690 - The Ascii Output is now also capable of writing single data members
691 of one container
692
693 - You are now able to change the order of the values written to the
694 ascii file
695
696 - You can now specify a conversion factor for each data member written
697 to an ascii file. This may be usefull to change the units of the
698 data member (eg. degrees instead of millimeters in case of the
699 hillas parameters)
700
701 - Replaced old MHillas by a new structure which allows you to extend
702 the parameters stored in MHillas very easily:
703 see MHillas and MHillasExt
704
705 - Added classes to handle source dependancy of image parameters:
706 see MHillasSrc
707
708 - Added container (MBinning) to have a standard input for the binning
709 in different histograms (eg. the Energy bins should be the same in
710 all histograms)
711
712 - Changed Hillas histograms from mm to deg
713
714 - Added the flexible binning to the hillas histograms
715
716 - Added a filter for the alpha parameter (MFAlpha)
717
718 - It is now possible to write single data members of a class object to
719 an output stream instead of the whole container only
720
721 - Added a generalized filter for a data member:
722 MFDataMember filter("MHillas.fWidth", '<', 0.5);
723
724 - Added a generalized Filter parser for more difficult filter rules
725 MF filter("MHillas.fWidth<0.5 && MHillas.fLength>0.5");
726
727 - Added new Monte Carlo histograms:
728 MHMcEnergyImpact and MHMcEfficiency
729
730 - Added many new histograms needed for the flux calculation.
731
732 - Added a generalized histograms which can fill and show up to three
733 data members in either a one-, two- or three-dimensional histogram, eg:
734 MH3 mh3("MHillas.fWidth", "MHillas.fLength");
735
736 - Added:
737 * calculation of <Theta> as a function of Theta (MHThetabarTheta)
738 * calculation of <Theta> as a function of time (MHThetabarTime)
739 they are needed in the flux calculation in
740 order to select for a given bin in Theta (or time) the appropriate
741 effective collection area, which is assumed to be given as a function
742 of Theta and the true energy
743
744 - Added calculation of the migration matrix in the energy
745 (MHMcEnergyMigration):
746 the migration matrix describes the migration from the true (E_true)
747 to the estimated energy (E_est); it is needed to determine the
748 distribution of E_true from the measured distribution of E_est
749 by unfolding
750
751 - changed the color palette in the camera display to DeapSea.
752
753
754
755 *** Version 0.6 (2002/01/15)
756
757 - Introduce the option of disable pixels (MBlindPixels and
758 MBlindPixelCalc) for the analysis (eg MHillasCalc) to be
759 able to deal with Star Field NSB.
760
761 - Fixed a bug in the pedestals substraction
762
763 - Introduced verbosity levels
764
765 - Introduced a task (MReadMarsFile) which reads the RunHeader tree, too.
766
767 - Fixed several bugs in MFTriggerLvl1 which caused to filter not to
768 work correctly (thanks to Abelardo)
769
770 - Introduced correct treatment of the diffuse Night Sky Background
771 and NSB (MMcPedestalNSB)
772
773 - Corrected treatment of the electronic noise (MMcPedestalCopy)
774
775 - Introduced MMcRunHeaders which contains monte carlo run informations
776
777 - Added a 'Print'-Task (MPrint) which calls the Print function
778 of a parameter container for each event
779
780 - Removed MHtml (was replaced by THtml of root 3.02) in dohtml.C
781
782 - changes to be more efficient with root 3.02/06
783
784 - root 3.02/06 fixes:
785 + the memory leak when reading MRawEvtData
786 + loosing more time than necessary to update the progress bar
787
788 - MWriteAsciiFile is now capable of writing more than one container
789 in a line. For example: To be able to write Monte Carlo and
790 Hillas values (energy and alpha) in one line.
791
792
793
794 *** Version 0.5 (2001/11/06)
795
796 - Added new GUI functionality (Analysis)
797
798 - Added a camera display to be able to display events in the camera
799 together with the calculated hillas ellipse
800
801 - Added a 'Clone'-Task (MClone) which can clone a parameter container
802 object at any state of the analysis, so that the output are several
803 states
804
805 - Fixed a bug in the collection area error calculation
806 (Thanks to Ciro and Abelardo)
807
808 - Fixed a bug which causes merpp to crash in some environments
809
810 - Implemented auto enabling scheme for Branches to speed up reading
811 a lot (see MReadTree and MTask)
812
813 - Fixed a bug in the Histogram classes which caused histograms to
814 be written to a file by MWriteRootFile without request
815
816 - changed the object I/O from the old stylish root I/O to the new
817 'auto evolution scheme' This was done only for classes which are not
818 yet used in Monte Carlo files, so that these files are still readable.
819
820 - Added support for a progress bar in MEvtLoop and MReadTree
821 (see the Analysis Window in Mars for an example)
822
823 - Fixed a bug in the package creation which disturbed the conversion
824 between a mars version unpacked from a tar file and the repository.
825
826 - Changed the code to writer merpped (converted into root format)
827 raw files, to get faster (around 10%)
828
829
830
831 *** Version 0.4 (2001/09/20)
832
833 - This release is made to compile on a root version >= 3.00
834
835 - Fixed a bug which causes MReadTree to read the first file only
836
837 - Added a task to compute the trigger rate (MMcTriggerRateCalc)
838
839 - Added a task to write a container to an Ascii file (MWriteAsciiFile)
840
841 - Added a task to write several container to a root file (MWriteRootFile)
842
843 - Added calculation of the Enegry Threshold (MMcThresholdCalc)
844
845 - Added calculation of the collection area (MMcCollectionAreaCalc)
846
847 - fixed some bugs in the Hillas calculation
848
849 - added filters to be able to control the task execution dependent on
850 a parameter (for example: the number of level 1 triggers in a MC-file)
851
852
853
854 *** Version 0.3 (2001/04/23)
855
856 - Many demo macros added
857
858 - MCT1ReadAscii is now able to handle more than one file (s. ::AddFile)
859
860 - Hillas Calculation added
861
862 - Standard image cleaning available
863
864 - MReadTree is now able to handle more than one file
865 (Remark: of the same structure)
866
867 - Now we are able to display events in a first version of the
868 Camera event display. To do this we must run the macro
869 "macros/readCT1.C" to read data from CT1.
870
871
872
873 *** Version 0.2 (2001/01/24)
874
875 - First Implementation of a Gui to read the raw data. Start the
876 gui with the command mars.
877
878
879
880 *** Version 0.1 (2000/12/20)
881
882 - First official release 0.1
883
884 - Changes:
885
886 + changed calling style of MRawPixelIterator from do...while to
887 while-loop
888
Note: See TracBrowser for help on using the repository browser.