source: trunk/MagicSoft/Mars/callisto.cc@ 9275

Last change on this file since 9275 was 9224, checked in by tbretz, 16 years ago
*** empty log message ***
File size: 23.5 KB
Line 
1#include <TROOT.h>
2#include <TClass.h>
3#include <TSystem.h>
4#include <TGClient.h>
5#include <TApplication.h>
6#include <TObjectTable.h>
7
8#include "MLog.h"
9#include "MLogManip.h"
10
11#include "MEnv.h"
12#include "MArgs.h"
13#include "MArray.h"
14#include "MDirIter.h"
15
16#include "MStatusDisplay.h"
17
18#include "MSequence.h"
19#include "MJPedestal.h"
20#include "MJCalibration.h"
21#include "MJCalibrateSignal.h"
22#include "MJCalibTest.h"
23
24using namespace std;
25
26static void StartUpMessage()
27{
28 gLog << all << endl;
29
30 // 1 2 3 4 5
31 // 12345678901234567890123456789012345678901234567890
32 gLog << "========================================================" << endl;
33 gLog << " Callisto - MARS V" << MARSVER << endl;
34 gLog << " MARS -- CALibrate LIght Signals and Time Offsets" << endl;
35 gLog << " Compiled with ROOT v" << ROOT_RELEASE << " on <" << __DATE__ << ">" << endl;
36 gLog << "========================================================" << endl;
37 gLog << endl;
38}
39
40static void Usage()
41{
42 // 1 2 3 4 5 6 7 8
43 // 12345678901234567890123456789012345678901234567890123456789012345678901234567890
44 gLog << all << endl;
45 gLog << "Sorry the usage is:" << endl;
46 gLog << " callisto [-c] [-y] [options] sequence.txt|[tel:]number" << endl << endl;
47 gLog << " Arguments:" << endl;
48 gLog << " sequence.txt: ASCII file defining a sequence of runs" << endl;
49 gLog << " number: The sequence number (using file in the datacenter)" << endl;
50 gLog << " For more details see MSequence" << endl;
51 gLog << " Root Options:" << endl;
52 gLog << " -b Batch mode (no graphical output to screen)" << endl<<endl;
53 gLog << " Operation Modes:" << endl;
54 gLog << " -c Calculate the calibration constants" << endl;
55 gLog << " -y Extract and calibrate signal" << endl << endl;
56 gLog << " Data Type (exclusive):" << endl;
57 gLog << " -mc Input root-files are monte carlo files" << endl;
58 gLog << " Options:" << endl;
59 gLog.Usage();
60 gLog << " --debug-env=0 Disable debugging setting resources <default>" << endl;
61 gLog << " --debug-env[=1] Display untouched resources after program execution" << endl;
62 gLog << " --debug-env=2 Display untouched resources after eventloop setup" << endl;
63 gLog << " --debug-env=3 Debug setting resources from resource file and" << endl;
64 gLog << " command line" << endl;
65 gLog << " --debug-mem Debug memory usage" << endl << endl;
66 gLog << " --rc=Name:option Set or overwrite a resource of the resource file." << endl;
67 gLog << " (Note, that this option can be used multiple times." << endl;
68 gLog << endl;
69 gLog << " -q Quit when job is finished" << endl;
70 gLog << " -f Force overwrite of existing files" << endl;
71 gLog << " --ind=path Path where to search for the data files" << endl;
72 gLog << " [default=standard path in datacenter]" << endl;
73 gLog << " --iny=path Path where to search for the calibration files" << endl;
74 gLog << " [default=local path or output path of Mode-C]" << endl;
75 gLog << " --outc=path Path to write Mode-C result to [def=local path]" << endl;
76 gLog << " --outy=path Path to write Mode-Y result to [def=local path]" << endl;
77 gLog << " --out=path Path to write the all results to [def=local path]" << endl;
78 gLog << " (overwrites --outc and --outy)" << endl;
79 gLog << " --path=path Path to write the all results to [def=local path]" << endl;
80 gLog << " (overwrites --iny, --outc and --outy)" << endl;
81 gLog << " --dev-null Suppress output of Y-files (for test purpose)" << endl;
82 gLog << " --print-seq Print Sequence information" << endl;
83 gLog << " --print-files Print Files taken from Sequence" << endl;
84 gLog << " --print-found Print Files found from Sequence" << endl;
85// gLog << " --use-test Apply calibration constants to same calibration" << endl;
86// gLog << " file (for testing, calibration mode only)" << endl;
87 gLog << " --movie Write a movie in addition to Mode-Y (this might " << endl;
88 gLog << " stop the eventloop before all evts are processed)" << endl;
89// gLog << " --moon Force using pedestal fits instead of calculated RMS" << endl;
90 gLog << " --config=callisto.rc Resource file [default=callisto.rc]" << endl;
91 gLog << endl;
92 gLog << " --version, -V Show startup message with version number" << endl;
93 gLog << " -?, -h, --help This help" << endl << endl;
94 gLog << " Setup of the two jobs run by callisto (MJPedestal and MJCalibration)" << endl;
95 gLog << " can be done with the resource file. See MJPedestal and MJCalibration" << endl;
96 gLog << " especially CheckEnv() for more details. Command line options might" << endl;
97 gLog << " be overwritten by the resource file." << endl << endl;
98 gLog << " If running in Mode-C and Mode-Y --iny= is obsolete, instead --outc=" << endl;
99 gLog << " is used." << endl << endl;
100 gLog << " Using --iny=, --outc=, --outy=, --out= or --path= automatically" << endl;
101 gLog << " enables the corresponding modes. In this case -c/-y are obsolete." << endl << endl;
102 gLog << "Description:" << endl;
103 gLog << " callisto will calculate pedestals from pedestal-files defined in a" << endl;
104 gLog << " sequence-file. This pedestals are used to calculate the calibration" << endl;
105 gLog << " constants. These constants are stored in a so called calibration-file" << endl;
106 gLog << " together with some datacheck plots which can be viewed using either" << endl;
107 gLog << " showplot or MStatusDisplay in the interpreter. A description of a" << endl;
108 gLog << " sequence-file can be found in the class reference of MSequence." << endl << endl;
109 gLog << "Background:" << endl;
110 gLog << " Callisto is a large, icy, dark-colored, low-density outer moon of" << endl;
111 gLog << " Jupiter that is scarred with impact craters and ejecta. It has a" << endl;
112 gLog << " diameter of about 4800km, the second-largest moon of Jupiter; it is" << endl;
113 gLog << " roughly the size of Mercury. Callisto has the largest-known impact" << endl;
114 gLog << " crater in the Solar System, Valhalla, which has a bright patch 600km" << endl;
115 gLog << " across and rings that go out to almost 3000km. Callisto orbits" << endl;
116 gLog << " Jupiter at a mean distance of 1,883,000km. Its mass is 1.1e23 kg. It" << endl;
117 gLog << " takes Callisto 16.7 days to orbit Jupiter in a synchronous orbit." << endl;
118 gLog << " Jupiter's moon Callisto was discovered independently by Galileo and" << endl;
119 gLog << " S.Marius in 1610." << endl << endl;
120 gLog << "Example:" << endl;
121 gLog << " callisto -f --outc=mycal/ --outy=mysignal/ --log sequence02345.txt" << endl;
122 gLog << endl;
123}
124
125static void PrintFiles(const MSequence &seq, const TString &kInpathD, Bool_t showall)
126{
127 const char *prep = showall ? "Found" : "Scheduled";
128
129 MDirIter Next1, Next2, Next3;
130 seq.GetRuns(Next1, MSequence::kRawPed, kInpathD);
131 seq.GetRuns(Next2, MSequence::kRawCal, kInpathD);
132 seq.GetRuns(Next3, MSequence::kRawDat, kInpathD);
133
134 gLog << all;
135 gLog.Separator(Form("%s Pedestal Files", prep));
136 Next1.Print(showall?"all":"");
137 gLog << endl;
138 gLog.Separator(Form("%s Calibration Files", prep));
139 Next2.Print(showall?"all":"");
140 gLog << endl;
141 gLog.Separator(Form("%s Data Files", prep));
142 Next3.Print(showall?"all":"");
143 gLog << endl;
144}
145
146int main(int argc, char **argv)
147{
148 if (!MARS::CheckRootVer())
149 return 0xff;
150
151 MLog::RedirectErrorHandler(MLog::kColor);
152
153 //
154 // Evaluate arguments
155 //
156 MArgs arg(argc, argv);
157 gLog.Setup(arg);
158
159 StartUpMessage();
160
161 if (arg.HasOnly("-V") || arg.HasOnly("--version"))
162 return 0;
163
164 if (arg.HasOnly("-?") || arg.HasOnly("-h") || arg.HasOnly("--help"))
165 {
166 Usage();
167 return 2;
168 }
169
170 const TString kConfig = arg.GetStringAndRemove("--config=", "callisto.rc");
171
172 const Bool_t kPrintSeq = arg.HasOnlyAndRemove("--print-seq");
173 const Bool_t kPrintFiles = arg.HasOnlyAndRemove("--print-files");
174 const Bool_t kPrintFound = arg.HasOnlyAndRemove("--print-found");
175// const Bool_t kUseTest = arg.HasOnlyAndRemove("--use-test");
176 const Bool_t kMovie = arg.HasOnlyAndRemove("--movie");
177 const Bool_t kDebugMem = arg.HasOnlyAndRemove("--debug-mem");
178 const Bool_t kNullOut = arg.HasOnlyAndRemove("--dev-null");
179// Bool_t kMoon = arg.HasOnlyAndRemove("--moon");
180 Int_t kDebugEnv = arg.HasOnlyAndRemove("--debug-env") ? 1 : 0;
181 kDebugEnv = arg.GetIntAndRemove("--debug-env=", kDebugEnv);
182
183 const Bool_t kQuit = arg.HasOnlyAndRemove("-q");
184 const Bool_t kBatch = arg.HasOnlyAndRemove("-b");
185 const Bool_t kOverwrite = arg.HasOnlyAndRemove("-f");
186 //const Bool_t kForceExec = arg.HasOnlyAndRemove("-ff");
187
188 const TString kInpathD = arg.GetStringAndRemove("--ind=", "");
189 TString kInpathY = arg.GetStringAndRemove("--iny=", "");
190 TString kOutpathY = arg.GetStringAndRemove("--outy=", "");
191 TString kOutpathC = arg.GetStringAndRemove("--outc=", "");
192 const TString kOutpath = arg.GetStringAndRemove("--out=", "");
193 const TString kPath = arg.GetStringAndRemove("--path=", "");
194
195 Bool_t kModeC = arg.HasOnlyAndRemove("-c");
196 Bool_t kModeY = arg.HasOnlyAndRemove("-y");
197 const Bool_t kIsMC = arg.HasOnlyAndRemove("-mc");
198
199 if (!kInpathY.IsNull() || !kOutpathY.IsNull() || !kOutpath.IsNull() || !kPath.IsNull())
200 kModeY = kTRUE;
201 if (!kOutpathC.IsNull() || !kOutpath.IsNull() || !kPath.IsNull())
202 kModeC = kTRUE;
203
204 //
205 // check for the right usage of the program (number of arguments)
206 //
207 if (arg.GetNumArguments()!=1)
208 {
209 gLog << warn << "WARNING - Wrong number of arguments..." << endl;
210 Usage();
211 return 2;
212 }
213
214 //
215 // Now we access/read the resource file. This will remove all
216 // --rc= from the list of arguments.
217 //
218 MEnv env(kConfig);
219 if (!env.IsValid())
220 {
221 gLog << err << "ERROR - Reading resource file " << kConfig << "." << endl;
222 return 0xfe;
223 }
224
225 // And move the resource options from the command line to the MEnv
226 if (!env.TakeEnv(arg, kDebugEnv>2))
227 return 0xfd;
228
229 //
230 // check for the right usage of the program (number of options)
231 //
232 if (arg.GetNumOptions()>0)
233 {
234 gLog << warn << "WARNING - Unknown commandline options..." << endl;
235 arg.Print("options");
236 gLog << endl;
237 return 2;
238 }
239
240 if (!kModeC && !kModeY /*&& !kUseTest*/)
241 {
242 gLog << err << "Neither calibration (-c), signal extraction (-y) or test-mode (--use-test)" << endl;
243 gLog << "specified! You can also give the operation mode by the options defining the" << endl;
244 gLog << "output path --outc, --outy or --out." << endl;
245 Usage();
246 return 2;
247 }
248 if (!kModeY && kMovie)
249 {
250 gLog << err << "Signal extraction mode (-y) not switched on but movie requested." << endl;
251 Usage();
252 return 2;
253 }
254
255 if ((kModeC/* || kUseTest*/) && kOutpathC.IsNull())
256 kOutpathC = ".";
257 if (kModeY)
258 {
259 if (kInpathY.IsNull())
260 kInpathY = ".";
261 if (kOutpathY.IsNull())
262 kOutpathY = ".";
263 }
264 if (!kOutpath.IsNull())
265 {
266 kOutpathC = kOutpath;
267 kOutpathY = kOutpath;
268 }
269 if (!kPath.IsNull())
270 {
271 kOutpathC = kOutpath;
272 kOutpathY = kOutpath;
273 kInpathY = kOutpath;
274 }
275
276 if (kModeC && kModeY)
277 kInpathY = kOutpathC;
278
279 //
280 // Setup sequence file and check for its existance
281 //
282 TString kSequence = arg.GetArgumentStr(0);
283
284 if (!MSequence::InflateSeq(kSequence, kIsMC))
285 return 3;
286
287 if (kDebugMem)
288 TObject::SetObjectStat(kTRUE);
289
290 //
291 // Setup sequence and check its validity
292 //
293 MSequence seq(kSequence, kInpathD);
294 if (!seq.IsMonteCarlo())
295 seq.SetMonteCarlo(kIsMC);
296 if (kPrintSeq)
297 {
298 gLog << all;
299 gLog.Separator(kSequence);
300 seq.Print();
301 gLog << endl;
302 }
303 if (!seq.IsValid())
304 {
305 gLog << err << "Sequence read but not valid!" << endl << endl;
306 return 5;
307 }
308
309 //
310 // Process print options
311 //
312 if (kPrintFiles)
313 PrintFiles(seq, kInpathD, kFALSE);
314 if (kPrintFound)
315 PrintFiles(seq, kInpathD, kTRUE);
316
317// if (seq.HasMoon())
318// kMoon = kTRUE;
319
320
321 /*
322 //
323 // Check for existance of all files
324 //
325 MDirIter iter;
326 const Int_t n0 = seq.SetupAllRuns(iter, kInpathD, "[DPC]");
327 const Int_t n1 = seq.GetNumAllRuns();
328 if (n0 != n1)
329 {
330 if (kForceExec)
331 gLog << warn << "WARNING";
332 else
333 gLog << err << "ERROR";
334 gLog << " - " << n1 << " files in sequence defined, but " << n0 << " found in ";
335 gLog << (kInpathD.IsNull() ? "<defaultpath>" : kInpathD.Data()) << endl;
336 if (!kForceExec)
337 return 2;
338 }
339
340 if (kPrintOnly)
341 return 0;
342 */
343 //
344 // Initialize root
345 //
346 MArray::Class()->IgnoreTObjectStreamer();
347 MParContainer::Class()->IgnoreTObjectStreamer();
348
349 // FIXME: Remove all non-root arguments and options from argc, argv
350
351 TApplication app("callisto", &argc, argv);
352 if (!gROOT->IsBatch() && !gClient || gROOT->IsBatch() && !kBatch)
353 {
354 gLog << err << "Bombing... maybe your DISPLAY variable is not set correctly!" << endl;
355 return 1;
356 }
357
358 //
359 // Update frequency by default = 1Hz
360 //
361 MStatusDisplay *d = new MStatusDisplay;
362
363 // From now on each 'Exit' means: Terminate the application
364 d->SetBit(MStatusDisplay::kExitLoopOnExit);
365 d->SetTitle(Form("-- Callisto: %s --", kSequence.Data()));
366
367 if (kModeC/* || kUseTest*/)
368 {
369 //
370 // Calculate pedestal for pedestal-calculation and calibration
371 //
372 MJPedestal job1(Form("MJPedestalC1 #%d", seq.GetSequence()));
373 job1.SetNoStorage();
374 job1.SetSequence(seq);
375 job1.SetEnv(&env);
376 job1.SetEnvDebug(kDebugEnv);
377 job1.SetDisplay(d);
378 job1.SetOverwrite(kOverwrite);
379// job1.SetUseHists(kMoon);
380
381
382 job1.SetExtractionFundamental();
383 // job1.SetPathOut(kOutpathC); // not yet needed
384 // job1.SetPathIn(kInpathC); // DO NOT CALL IT. IT WOULD READ THE XEXTRACTOR FROM calib-file
385
386 if (!job1.Process())
387 {
388 gLog << err << "Calculation of pedestal failed." << endl << endl;
389 return 6;
390 }
391
392 if (!job1.GetDisplay())
393 {
394 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
395 return 1;
396 }
397
398 //
399 // Calculate pedestal and pedestal resolution
400 //
401 MJPedestal job2(Form("MJPedestalC2 #%d", seq.GetSequence()));
402 job2.SetNoStorage();
403 job2.SetSequence(seq);
404 job2.SetEnv(&env);
405 job2.SetEnvDebug(kDebugEnv);
406 job2.SetDisplay(d);;
407 job2.SetOverwrite(kOverwrite);
408// job2.SetUseHists(kMoon);
409 job2.SetDeadPixelCheck();
410 // job1.SetPathOut(kOutpathC); // not yet needed
411 // job1.SetPathIn(kInpathC); // DO NOT CALL IT. IT WOULD READ THE XEXTRACTOR FROM calib-file
412
413 //job2.SetExtractorResolution();
414 job2.SetExtractionWithExtractorRndm();
415 job2.SetExtractor(job1.GetExtractor());
416 job2.SetPedestals(job1.GetPedestalCam());
417 job2.SetBadPixels(job1.GetBadPixels());
418
419 // Please check the Changelog of 2005/04/20 about further deatils of the next comment
420 //if (job1.GetExtractor().InheritsFrom("MExtractTimeAndCharge"))
421 if (!job2.Process())
422 {
423 gLog << err << "Calculation of pedestal resolution failed." << endl << endl;
424 return 7;
425 }
426
427 if (!job2.GetDisplay())
428 {
429 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
430 return 1;
431 }
432
433 //
434 // Do calibration
435 //
436 MJCalibration job3(Form("MJCalibration #%d", seq.GetSequence()));
437 job3.SetSequence(seq);
438 job3.SetEnv(&env);
439 job3.SetEnvDebug(kDebugEnv);
440 job3.SetDisplay(d);
441 job3.SetOverwrite(kOverwrite);
442 job3.SetPathOut(kOutpathC);
443 // job2.SetPathIn(kInpathC); // not yet needed
444
445 job3.SetBadPixels(job2.GetBadPixels());
446 job3.SetExtractor(job2.GetExtractor());
447 job3.SetExtractorCam(job2.GetPedestalCam());
448
449 if (!job3.Process(job1.GetPedestalCam()))
450 {
451 gLog << err << "Calculation of calibration failed." << endl << endl;
452 return 8;
453 }
454
455 if (kDebugEnv>0)
456 env.PrintUntouched();
457
458 if (!job3.GetDisplay())
459 {
460 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
461 return 1;
462 }
463/*
464 if (kUseTest)
465 {
466 MJCalibTest job4(Form("MJCalibTest #%d", seq.GetSequence()));
467 job4.SetBadPixels(job2.GetBadPixels());
468 job4.SetSequence(seq);
469 job4.SetEnv(&env);
470 job4.SetEnvDebug(kDebugEnv);
471 job4.SetDisplay(d);;
472 job4.SetOverwrite(kOverwrite);
473 job4.SetPathOut(kOutpathC);
474
475 if (!job4.Process(job1.GetPedestalCam()))
476 {
477 gLog << err << "Calibration of calibration failed." << endl << endl;
478 return 9;
479 }
480
481 if (kDebugEnv>0)
482 env.PrintUntouched();
483
484 if (!job4.GetDisplay())
485 {
486 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
487 return 1;
488 }
489 }*/
490 }
491
492 if (kModeY)
493 {
494 d->Reset();
495
496 //
497 // Calculate starting pedestal for data extraction
498 //
499 MJPedestal job1(Form("MJPedestalY1 #%d", seq.GetSequence()));
500 job1.SetNoStorage();
501 job1.SetSequence(seq);
502 job1.SetEnv(&env);
503 job1.SetEnvDebug(kDebugEnv);
504 job1.SetDisplay(d);
505 job1.SetNoDisplay();
506 job1.SetOverwrite(kOverwrite);
507 job1.SetPathIn(kInpathY); // --> READ Extractor from calib-file
508 //job1.SetPathOut(kOutpathY); // not yet needed
509 job1.SetUseData();
510 job1.SetExtractionFundamental();
511// job1.SetUseHists(kMoon);
512
513 if (!job1.Process())
514 {
515 gLog << err << "Calculation of fundamental pedestal failed." << endl << endl;
516 return 10;
517 }
518
519 if (!job1.GetDisplay())
520 {
521 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
522 return 1;
523 }
524
525 //
526 // Calculate pedestal and pedestal resolution
527 //
528 MJPedestal job2(Form("MJPedestalY2 #%d", seq.GetSequence()));
529 job2.SetNoStorage(kMovie);
530 job2.SetSequence(seq);
531 job2.SetEnv(&env);
532 job2.SetEnvDebug(kDebugEnv);
533 job2.SetDisplay(d);
534 job2.SetNoDisplay();
535 job2.SetOverwrite(kOverwrite);
536 job2.SetPathIn(kInpathY);
537 job2.SetPulsePosCheck(!seq.IsMonteCarlo());
538 job2.SetPathOut(kOutpathY); // for updating the extractor
539
540 job2.SetUseData();
541 job2.SetExtractionWithExtractorRndm();
542 job2.SetExtractor(job1.GetExtractor());
543 job2.SetPedestals(job1.GetPedestalCam());
544 job2.SetBadPixels(job1.GetBadPixels());
545// job2.SetUseHists(kMoon);
546
547 // Please check the Changelog of 2005/04/20 about further deatils of the next comment
548 //if (job1.GetExtractor().InheritsFrom("MExtractTimeAndCharge"))
549 const Int_t rc = job2.Process();
550 if (rc<=0)
551 {
552 // rc==0: Error
553 // rc==-1: too much to the left
554 // rc==-2: too much to the right
555 // rc==-3: too much to the right (beyond limits)
556
557 gLog << err << "Calculation of pedestal from extractor (random) failed." << endl << endl;
558
559 //error coding for the automatic analysis (to be filled into the database)
560 switch (rc)
561 {
562 case 0:
563 return 11;
564 case -1:
565 return 12;
566 case -2:
567 return 13;
568 case -3:
569 return 14;
570 }
571 return 2;
572 }
573
574 if (!job2.GetDisplay())
575 {
576 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
577 return 1;
578 }
579
580 //
581 // Calculate pedestal and pedestal resolution
582 //
583 MJPedestal job3(Form("MJPedestalY3 #%d", seq.GetSequence()));
584 job3.SetNoStorage();
585 job3.SetSequence(seq);
586 job3.SetEnv(&env);
587 job3.SetEnvDebug(kDebugEnv);
588 job3.SetDisplay(d);
589 job3.SetNoDisplay();
590 job3.SetOverwrite(kOverwrite);
591 job3.SetPathIn(kInpathY);
592 // job1.SetPathOut(kOutpathC); // not yet needed
593 // job1.SetPathIn(kInpathC); // not yet needed
594
595 job3.SetUseData();
596 job3.SetExtractionWithExtractor();
597 job3.SetExtractor(job2.GetExtractor());
598 job3.SetPedestals(job1.GetPedestalCam());
599 job3.SetBadPixels(job1.GetBadPixels());
600// job3.SetUseHists(kMoon);
601
602 if (!job3.Process())
603 {
604 gLog << err << "Calculation of pedestal from extractor failed." << endl << endl;
605 return 15;
606 }
607
608 if (!job3.GetDisplay())
609 {
610 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
611 return 1;
612 }
613
614 //
615 // Extract signal and calibrate it
616 //
617 MJCalibrateSignal job4(Form("MJCalibrateSignal #%d", seq.GetSequence()));
618 job4.SetSequence(seq);
619 job4.SetDisplay(d);;
620 job4.SetEnv(&env);
621 job4.SetEnvDebug(kDebugEnv);
622 job4.SetOverwrite(kOverwrite);
623 job4.SetPathIn(kInpathY);
624 job4.SetPathOut(kOutpathY);
625 job4.SetMovieMode(kMovie);
626 job4.SetNullOut(kNullOut);
627 if (!seq.IsMonteCarlo())
628 job4.SetExtractor(job2.GetExtractor());
629
630 // Where to search for calibration files
631 if (!job4.Process(job1.GetPedestalCam(), job3.GetPedestalCam(), job2.GetPedestalCam()))
632 return 16;
633
634 if (kDebugEnv>0)
635 env.PrintUntouched();
636
637 if (!job4.GetDisplay())
638 {
639 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
640 return 1;
641 }
642 }
643
644 if (kBatch || kQuit)
645 delete d;
646 else
647 {
648 // From now on each 'Close' means: Terminate the application
649 d->SetBit(MStatusDisplay::kExitLoopOnClose);
650
651 // Wait until the user decides to exit the application
652 app.Run(kFALSE);
653 }
654
655 if (TObject::GetObjectStat())
656 {
657 TObject::SetObjectStat(kFALSE);
658 gObjectTable->Print();
659 }
660
661 return 0;
662}
663
Note: See TracBrowser for help on using the repository browser.