| 1 | # ==========================================================================
|
|---|
| 2 | #############################################################################
|
|---|
| 3 | # ==========================================================================
|
|---|
| 4 | # General
|
|---|
| 5 | # ==========================================================================
|
|---|
| 6 | #############################################################################
|
|---|
| 7 | # ==========================================================================
|
|---|
| 8 |
|
|---|
| 9 | # -------------------------------------------------------------------------
|
|---|
| 10 | # Use this if you want to setup the logging stream for the jobs
|
|---|
| 11 | # (overwrites command line options)
|
|---|
| 12 | # -------------------------------------------------------------------------
|
|---|
| 13 | #MLog.VerbosityLevel: 2
|
|---|
| 14 | #MLog.DebugLevel: 1
|
|---|
| 15 | #MLog.NoColors: yes
|
|---|
| 16 |
|
|---|
| 17 | # ==========================================================================
|
|---|
| 18 | #############################################################################
|
|---|
| 19 | # ==========================================================================
|
|---|
| 20 | # Calibration
|
|---|
| 21 | # ==========================================================================
|
|---|
| 22 | #############################################################################
|
|---|
| 23 | # ==========================================================================
|
|---|
| 24 |
|
|---|
| 25 | # -------------------------------------------------------------------------
|
|---|
| 26 | # Use this if you want to write the MJPedestal output somewhere
|
|---|
| 27 | # If you don't want it, it is written to the calibration output anyhow.
|
|---|
| 28 | # -------------------------------------------------------------------------
|
|---|
| 29 | #MJPedestalC1.PathOut: .
|
|---|
| 30 | #MJPedestalC2.PathOut: .
|
|---|
| 31 | #MJPedestalC1.BadPixelsFile: mjobs/badpixels_0_559.rc
|
|---|
| 32 | #MJPedestalC1.ReferenceFile: mjobs/pedestalref.rc
|
|---|
| 33 | #MJPedestalC2.ReferenceFile: mjobs/pedestalref.rc
|
|---|
| 34 | MJCalibration.ReferenceFile: mjobs/calibrationref_Nov04.rc
|
|---|
| 35 | MJCalibration.MHCalibrationRelTimeCam.ReferenceFile: mjobs/calibrationref_Nov04.rc
|
|---|
| 36 | MJCalibration.MHCalibrationChargeCam.ReferenceFile: mjobs/calibrationref_Nov04.rc
|
|---|
| 37 |
|
|---|
| 38 | # -------------------------------------------------------------------------
|
|---|
| 39 | # Use this to define where the calibration output is stored. The filename
|
|---|
| 40 | # is created from the sequence number. If nothing is specified '.' is
|
|---|
| 41 | # assumed. (overwrites command line options)
|
|---|
| 42 | # -------------------------------------------------------------------------
|
|---|
| 43 | #MJCalibration.PathOut: calped
|
|---|
| 44 |
|
|---|
| 45 | # -------------------------------------------------------------------------
|
|---|
| 46 | # Define here which signal extractor you are going to use for the
|
|---|
| 47 | # whole calibration chain
|
|---|
| 48 | # -------------------------------------------------------------------------
|
|---|
| 49 | MJPedestalC1.ExtractSignal: MExtractTimeAndChargeDigitalFilter
|
|---|
| 50 | # -------------------------------------------------------------------------
|
|---|
| 51 | # Define here an extractor which can be used for the December 04 data.
|
|---|
| 52 | # -------------------------------------------------------------------------
|
|---|
| 53 | #MJPedestalC1.ExtractSignal: MExtractTimeAndChargeSpline, MExtractTimeAndChargeDigitalFilterPeakSearch, MExtractTimeAndChargeSlidingWindow
|
|---|
| 54 | # -------------------------------------------------------------------------
|
|---|
| 55 | # Define here parameters valid for all extractors above
|
|---|
| 56 | # -------------------------------------------------------------------------
|
|---|
| 57 | #MJPedestalC1.ExtractSignal.HiGainFirst: 0
|
|---|
| 58 | #MJPedestalC1.ExtractSignal.HiGainLast: 15
|
|---|
| 59 | #MJPedestalC1.ExtractSignal.LoGainFirst: 3
|
|---|
| 60 | #MJPedestalC1.ExtractSignal.LoGainLast: 14
|
|---|
| 61 | #MJPedestalC1.ExtractSignal.SaturationLimit: 250
|
|---|
| 62 | #MJPedestalC1.ExtractSignal.OffsetLoGain: 1.51
|
|---|
| 63 | #MJPedestalC1.ExtractSignal.LoGainSwitch: 150
|
|---|
| 64 | #MJPedestalC1.ExtractSignal.LoGainStartShift: -2.8
|
|---|
| 65 | # -------------------------------------------------------------------------
|
|---|
| 66 | # Define here parameters valid for the spline:
|
|---|
| 67 | # -------------------------------------------------------------------------
|
|---|
| 68 | #MJPedestalC1.ExtractSignal.Resolution: 0.05
|
|---|
| 69 | #MJPedestalC1.ExtractSignal.RiseTimeHiGain: 0.5
|
|---|
| 70 | #MJPedestalC1.ExtractSignal.FallTimeHiGain: 1.5
|
|---|
| 71 | #MJPedestalC1.ExtractSignal.LoGainStretch: 1.5
|
|---|
| 72 | #MJPedestalC1.ExtractSignal.ExtractionType: Integral <default>
|
|---|
| 73 | #MJPedestalC1.ExtractSignal.ExtractionType: Amplitude
|
|---|
| 74 |
|
|---|
| 75 | # -------------------------------------------------------------------------
|
|---|
| 76 | # In the case of the Digital filter you have to overwrite the default
|
|---|
| 77 | # weights file depending on what you are extracting
|
|---|
| 78 | # -------------------------------------------------------------------------
|
|---|
| 79 | MJPedestalC2.ExtractSignal.WeightsFile: msignal/calibration_weights_UV46.dat
|
|---|
| 80 | MJPedestalY2.ExtractSignal.WeightsFile: msignal/cosmics_weights46.dat
|
|---|
| 81 | MJPedestalY3.ExtractSignal.WeightsFile: msignal/cosmics_weights46.dat
|
|---|
| 82 | MJCalibration.ExtractSignal.WeightsFile: msignal/calibration_weights_UV46.dat
|
|---|
| 83 | MJCalibrateSignal.ExtractSignal.WeightsFile: msignal/cosmics_weights46.dat
|
|---|
| 84 | MJCalibrateSignal.ExtractInterlaced.WeightsFile: msignal/calibration_weights_UV46.dat
|
|---|
| 85 |
|
|---|
| 86 | #MJPedestalC2.ExtractSignal.AutomaticWeightsFile: On
|
|---|
| 87 | #MJPedestalY2.ExtractSignal.AutomaticWeightsFile: On
|
|---|
| 88 | #MJPedestalY3.ExtractSignal.AutomaticWeightsFile: On
|
|---|
| 89 | #MJCalibration.ExtractSignal.AutomaticWeightsFile: On
|
|---|
| 90 | #MJCalibrateSignal.ExtractSignal.AutomaticWeightsFile: On
|
|---|
| 91 | #MJCalibrateSignal.ExtractInterlaced.AutomaticWeightsFile: On
|
|---|
| 92 |
|
|---|
| 93 | # -------------------------------------------------------------------------
|
|---|
| 94 | # Configure MJCalibration
|
|---|
| 95 | # -------------------------------------------------------------------------
|
|---|
| 96 |
|
|---|
| 97 | # Switch on relative time calibration
|
|---|
| 98 | #MJCalibration.RelTimeCalibration: Yes
|
|---|
| 99 | # Type of used data format: raw, root, mc
|
|---|
| 100 | #MJCalibration.DataType: Root
|
|---|
| 101 | # Type of displayed plots: Full,DataCheck,Normal
|
|---|
| 102 | #MJCalibration.Display: datacheck
|
|---|
| 103 | # Write additinal debug output
|
|---|
| 104 | #MJCalibration.Debug: No
|
|---|
| 105 | # Use blind pixel
|
|---|
| 106 | #MJCalibration.UseBlindPixel: No
|
|---|
| 107 | # Use pin diode
|
|---|
| 108 | #MJCalibration.UsePINDiode: No
|
|---|
| 109 | # Use pixel check option
|
|---|
| 110 | #MJCalibration.PixelCheck: Yes
|
|---|
| 111 | #MJCalibTest.PixelCheck: Yes
|
|---|
| 112 |
|
|---|
| 113 | # -------------------------------------------------------------------------
|
|---|
| 114 | # Individual events check for calibration results
|
|---|
| 115 | # -------------------------------------------------------------------------
|
|---|
| 116 |
|
|---|
| 117 | #ContCosmics.MaxEmptyPixels: 0.2
|
|---|
| 118 | #ContCosmics.MaxExcludedFraction: 1
|
|---|
| 119 | #ContCosmics.MinAcceptedFraction: 0
|
|---|
| 120 |
|
|---|
| 121 | # -------------------------------------------------------------------------
|
|---|
| 122 | # You can choose the pedestal extraction algorithm/task. To use
|
|---|
| 123 | # MPedCalcPedRun use the lines below. Be carefull, a pedestal file
|
|---|
| 124 | # could be (if no pedestal file available) a data-file, too.
|
|---|
| 125 | # -------------------------------------------------------------------------
|
|---|
| 126 | #MJPedestalC1.ExtractPedestal: MPedCalcPedRun
|
|---|
| 127 | #MJPedestalC1.ExtractPedestal.ExtractWinFirst: 0
|
|---|
| 128 | #MJPedestalC1.ExtractPedestal.ExtractWinSize: 6
|
|---|
| 129 | #MJPedestalC1.ExtractPedestal.PedestalUpdate: no
|
|---|
| 130 | #MJPedestalC1.ExtractPedestal.CheckWinFirst: 0
|
|---|
| 131 | #MJPedestalC1.ExtractPedestal.CheckWinSize: 29
|
|---|
| 132 |
|
|---|
| 133 | #MJPedestalC2.ExtractPedestal: MPedCalcPedRun
|
|---|
| 134 | #MJPedestalC2.ExtractPedestal.ExtractWinFirst: 0
|
|---|
| 135 | #MJPedestalC2.ExtractPedestal.ExtractWinSize: 6
|
|---|
| 136 | #MJPedestalC2.ExtractPedestal.PedestalUpdate: no
|
|---|
| 137 | #MJPedestalC2.ExtractPedestal.CheckWinFirst: 0
|
|---|
| 138 | #MJPedestalC2.ExtractPedestal.CheckWinSize: 29
|
|---|
| 139 |
|
|---|
| 140 | # -------------------------------------------------------------------------
|
|---|
| 141 | # You can choose the pedestal extraction algorithm/task. To use
|
|---|
| 142 | # MPedCalcFromLoGain use the lines below. Be carefull, a pedestal file
|
|---|
| 143 | # could be (if no pedestal file available) a data-file, too.
|
|---|
| 144 | # -------------------------------------------------------------------------
|
|---|
| 145 | #MJPedestalC1.ExtractPedestal: MPedCalcFromLoGain
|
|---|
| 146 | #MJPedestalC1.ExtractPedestal.ExtractWinFirst: 0
|
|---|
| 147 | #MJPedestalC1.ExtractPedestal.ExtractWinSize: 6
|
|---|
| 148 | #MJPedestalC1.ExtractPedestal.PedestalUpdate: no
|
|---|
| 149 | #MJPedestalC1.ExtractPedestal.CheckWinFirst: 0
|
|---|
| 150 | #MJPedestalC1.ExtractPedestal.CheckWinSize: 29
|
|---|
| 151 | #MJPedestalC1.ExtractPedestal.MaxSignalVar: 40
|
|---|
| 152 |
|
|---|
| 153 | #MJPedestalC2.ExtractPedestal: MPedCalcFromLoGain
|
|---|
| 154 | #MJPedestalC2.ExtractPedestal.ExtractWinFirst: 0
|
|---|
| 155 | #MJPedestalC2.ExtractPedestal.ExtractWinSize: 6
|
|---|
| 156 | #MJPedestalC2.ExtractPedestal.PedestalUpdate: no
|
|---|
| 157 | #MJPedestalC2.ExtractPedestal.CheckWinFirst: 0
|
|---|
| 158 | #MJPedestalC2.ExtractPedestal.CheckWinSize: 29
|
|---|
| 159 | #MJPedestalC2.ExtractPedestal.MaxSignalVar: 40
|
|---|
| 160 |
|
|---|
| 161 | # -------------------------------------------------------------------------
|
|---|
| 162 | # Configure MJPedestalC1 and MJPedestalC2
|
|---|
| 163 | # -------------------------------------------------------------------------
|
|---|
| 164 | # Possible data type: Raw,Root,MC
|
|---|
| 165 | #MJPedestalC1.DataType: Root
|
|---|
| 166 | #MJPedestalC2.DataType: Root
|
|---|
| 167 | #MJPedestalC3.DataType: Root
|
|---|
| 168 | # Type of displayed plots: Full,DataCheck,None
|
|---|
| 169 | #MJPedestalC1.Display: datacheck
|
|---|
| 170 | #MJPedestalC2.Display: datacheck
|
|---|
| 171 | #MJPedestalC3.Display: datacheck
|
|---|
| 172 | # Maximum number of event processed in the loop
|
|---|
| 173 | #MJPedestalC1.MaxEvents: 1000
|
|---|
| 174 | #MJPedestalC2.MaxEvents: 1000
|
|---|
| 175 | # Allow to overwrite existing files with the output file
|
|---|
| 176 | #MJPedestalC1.AllowOverwrite: No
|
|---|
| 177 | #MJPedestalC2.AllowOverwrite: No
|
|---|
| 178 | # Use data runs from the sequence instead of calibration runs
|
|---|
| 179 | #MJPedestalC1.UseData: No
|
|---|
| 180 | #MJPedestalC2.UseData: No
|
|---|
| 181 | # Switch off DeadPixelCheck with "No"
|
|---|
| 182 | #MJPedestalY2.DeadPixelCheck: yes
|
|---|
| 183 |
|
|---|
| 184 |
|
|---|
| 185 | # -------------------------------------------------------------------------
|
|---|
| 186 | # Use this if you want to change the software low-gain switch in the
|
|---|
| 187 | # calibration
|
|---|
| 188 | # -------------------------------------------------------------------------
|
|---|
| 189 | MJCalibration.ExtractSignal.LoGainSwitch: 170
|
|---|
| 190 |
|
|---|
| 191 | # -------------------------------------------------------------------------
|
|---|
| 192 | # Use this if you want to change the higain-vs. logain intercalibration
|
|---|
| 193 | # -------------------------------------------------------------------------
|
|---|
| 194 | #MJCalibration.HiLoCalibFile: mjobs/hilocalib_df46.root
|
|---|
| 195 |
|
|---|
| 196 | # -------------------------------------------------------------------------
|
|---|
| 197 | # Use this if you want to change the time extractor for the calibration
|
|---|
| 198 | # and automatically the data extraction
|
|---|
| 199 | # -------------------------------------------------------------------------
|
|---|
| 200 | #MJCalibration.ExtractTime: <dummy>
|
|---|
| 201 | #MJCalibration.ExtractTime: MExtractTimeFastSpline
|
|---|
| 202 | #MJCalibration.ExtractTime.HiGainFirst: 0
|
|---|
| 203 | #MJCalibration.ExtractTime.HiGainLast: 7
|
|---|
| 204 | #MJCalibration.ExtractTime.LoGainFirst: 3
|
|---|
| 205 | #MJCalibration.ExtractTime.LoGainLast: 8
|
|---|
| 206 | #MJCalibration.ExtractTime.WindowSizeHiGain: 6
|
|---|
| 207 | #MJCalibration.ExtractTime.WindowSizeLoGain: 6
|
|---|
| 208 | #MJCalibration.ExtractTime.OffsetLoGain: 1.51
|
|---|
| 209 |
|
|---|
| 210 | # -------------------------------------------------------------------------
|
|---|
| 211 | # Use this to change the behaviour of the calibration
|
|---|
| 212 | # -------------------------------------------------------------------------
|
|---|
| 213 | # Type if you set a colour explicitely from outside (TEST purposes!!)
|
|---|
| 214 | #MJCalibration.MCalibColorSet.ExplicitColor: green,blue,uv,ct1
|
|---|
| 215 |
|
|---|
| 216 | #MJCalibration.MCalibrationChargeCalc.ArrTimeRmsLimit: 3.5
|
|---|
| 217 | #MJCalibration.MCalibrationChargeCalc.ChargeLimit: 2.5
|
|---|
| 218 | #MJCalibration.MCalibrationChargeCalc.ChargeErrLimit: 0
|
|---|
| 219 | #MJCalibration.MCalibrationChargeCalc.ChargeRelErrLimit: 1
|
|---|
| 220 | #MJCalibration.MCalibrationChargeCalc.Debug: no
|
|---|
| 221 |
|
|---|
| 222 | #MJCalibration.MCalibrationChargeCalc.FFactorErrLimit: 4.5
|
|---|
| 223 | #MJCalibration.MCalibrationChargeCalc.LambdaErrLimit: 0.2
|
|---|
| 224 | #MJCalibration.MCalibrationChargeCalc.LambdaCheckLimit: 0.5
|
|---|
| 225 | #MJCalibration.MCalibrationChargeCalc.PheErrLowerLimit: 9.0
|
|---|
| 226 | #MJCalibration.MCalibrationChargeCalc.PheErrUpperLimit: 5.5
|
|---|
| 227 |
|
|---|
| 228 | #MJCalibration.MHCalibrationChargeCam.Debug: no
|
|---|
| 229 | #MJCalibration.MHCalibrationChargeCam.LoGain: yes
|
|---|
| 230 | #MJCalibration.MHCalibrationChargeCam.Oscillations: yes
|
|---|
| 231 | #MJCalibration.MHCalibrationChargeCam.SizeCheck: yes
|
|---|
| 232 | #MJCalibration.MHCalibrationChargeCam.Averageing: yes
|
|---|
| 233 | #MJCalibration.MHCalibrationChargeCam.HiGainNbins: 500
|
|---|
| 234 | #MJCalibration.MHCalibrationChargeCam.HiGainFirst: -98.
|
|---|
| 235 | #MJCalibration.MHCalibrationChargeCam.HiGainLast: 1902.
|
|---|
| 236 | #MJCalibration.MHCalibrationChargeCam.LoGainNbins: 500
|
|---|
| 237 | #MJCalibration.MHCalibrationChargeCam.LoGainFirst: -99.
|
|---|
| 238 | #MJCalibration.MHCalibrationChargeCam.LoGainLast: 901.
|
|---|
| 239 | #MJCalibration.MHCalibrationChargeCam.TimeLowerLimit: 1.
|
|---|
| 240 | #MJCalibration.MHCalibrationChargeCam.TimeUpperLimit: 3.
|
|---|
| 241 | #MJCalibration.MHCalibrationChargeCam.NumHiGainSaturationLimit: 0.02
|
|---|
| 242 | #MJCalibration.MHCalibrationChargeCam.NumLoGainSaturationLimit: 0.005
|
|---|
| 243 | #MJCalibration.MHCalibrationChargeCam.ProbLimit: 0.00000001
|
|---|
| 244 | #MJCalibration.MHCalibrationChargeCam.OverflowLimit: 0.005
|
|---|
| 245 | #MJCalibration.MHCalibrationChargeCam.PulserFrequency: 500
|
|---|
| 246 |
|
|---|
| 247 | #MJCalibration.MHCalibrationRelTimeCam.Debug: no
|
|---|
| 248 | #MJCalibration.MHCalibrationRelTimeCam.LoGain: no
|
|---|
| 249 | #MJCalibration.MHCalibrationRelTimeCam.Oscillations: yes
|
|---|
| 250 | #MJCalibration.MHCalibrationRelTimeCam.SizeCheck: yes
|
|---|
| 251 | #MJCalibration.MHCalibrationRelTimeCam.Averageing: yes
|
|---|
| 252 | #MJCalibration.MHCalibrationRelTimeCam.Nbins: 210
|
|---|
| 253 | #MJCalibration.MHCalibrationRelTimeCam.First: -5.
|
|---|
| 254 | #MJCalibration.MHCalibrationRelTimeCam.Last: 10.
|
|---|
| 255 | #MJCalibration.MHCalibrationRelTimeCam.NumHiGainSaturationLimit: 0.25
|
|---|
| 256 | #MJCalibration.MHCalibrationRelTimeCam.ProbLimit: 0.00001
|
|---|
| 257 | #MJCalibration.MHCalibrationRelTimeCam.OverflowLimit: 0.005
|
|---|
| 258 | #MJCalibration.MHCalibrationRelTimeCam.PulserFrequency: 500
|
|---|
| 259 |
|
|---|
| 260 |
|
|---|
| 261 | # ==========================================================================
|
|---|
| 262 | #############################################################################
|
|---|
| 263 | # ==========================================================================
|
|---|
| 264 | # Signal extraction
|
|---|
| 265 | # ==========================================================================
|
|---|
| 266 | #############################################################################
|
|---|
| 267 | # ==========================================================================
|
|---|
| 268 |
|
|---|
| 269 | # -------------------------------------------------------------------------
|
|---|
| 270 | # Use a OutputPath if you want to write the results to a file
|
|---|
| 271 | # -------------------------------------------------------------------------
|
|---|
| 272 | #MJCalibrateSignal.PathOut: .
|
|---|
| 273 | #MJPedestalY1.PathOut: .
|
|---|
| 274 | #MJPedestalY2.PathOut: .
|
|---|
| 275 | #MJPedestalY3.PathOut: .
|
|---|
| 276 | #MJCalibrateSignal.PathIn: .
|
|---|
| 277 |
|
|---|
| 278 | # -------------------------------------------------------------------------
|
|---|
| 279 | # If you want to change the behaviour of the pedestal extraction...
|
|---|
| 280 | # -------------------------------------------------------------------------
|
|---|
| 281 | # Possible data type: Raw,Root,MC
|
|---|
| 282 | #MJPedestalY1.DataType: Root
|
|---|
| 283 | #MJPedestalY2.DataType: Root
|
|---|
| 284 | #MJPedestalY3.DataType: Root
|
|---|
| 285 | #MJPedestalY1.UseData: Yes
|
|---|
| 286 | #MJPedestalY2.UseData: Yes
|
|---|
| 287 | #MJPedestalY3.UseData: Yes
|
|---|
| 288 | MJPedestalY1.MaxEvents: 500
|
|---|
| 289 | MJPedestalY2.MaxEvents: 5000
|
|---|
| 290 | MJPedestalY3.MaxEvents: 500
|
|---|
| 291 |
|
|---|
| 292 | # -------------------------------------------------------------------------
|
|---|
| 293 | # When the starting pedestal is extracted from the first events of
|
|---|
| 294 | # the data run also the average pulse position of these events
|
|---|
| 295 | # is determined. If the pulse position check is switched on (default)
|
|---|
| 296 | # the extraction window of the hi- and lo-gain extractor for the
|
|---|
| 297 | # determined average pulse position is not allowed to exceed the
|
|---|
| 298 | # extractors search region. In this scenario we assume that the
|
|---|
| 299 | # start of the extraction window is at least similar to the
|
|---|
| 300 | # rising edge of the pulse.
|
|---|
| 301 | # To make sure that the search region and the extraction window
|
|---|
| 302 | # does not touch increase the values.
|
|---|
| 303 | # -------------------------------------------------------------------------
|
|---|
| 304 | #MJPedestalY2.PulsePosCheck: yes
|
|---|
| 305 | #MJPedestalY2.ExtractWinLeft: 0.0
|
|---|
| 306 | #MJPedestalY2.ExtractWinRight: 0.0
|
|---|
| 307 |
|
|---|
| 308 |
|
|---|
| 309 | # -------------------------------------------------------------------------
|
|---|
| 310 | # Define the Pulse Position check parameters:
|
|---|
| 311 | # -------------------------------------------------------------------------
|
|---|
| 312 | #MJPedestalY2.MHCalibrationPulseTimeCam.SaturationLimit: 255
|
|---|
| 313 | #MJPedestalY2.MHCalibrationPulseTimeCam.LowerSignalLimit: 100
|
|---|
| 314 | #MJPedestalY2.MHCalibrationPulseTimeCam.NumPixelsRequired: 2
|
|---|
| 315 | #MJPedestalY2.PixelCheck: no
|
|---|
| 316 |
|
|---|
| 317 | #MJPedestalY.ExtractPedestal: MPedCalcFromLoGain
|
|---|
| 318 | #MJPedestalY.ExtractPedestal.PedestalUpdate: no
|
|---|
| 319 |
|
|---|
| 320 | # -------------------------------------------------------------------------
|
|---|
| 321 | # Setup pedestal extractor for running through data
|
|---|
| 322 | # -------------------------------------------------------------------------
|
|---|
| 323 | #MJCalibrateSignal.MPedCalcFundamental.PedestalUpdate: yes
|
|---|
| 324 | #MJCalibrateSignal.MPedCalcFundamental.NumDump: 500
|
|---|
| 325 | #MJCalibrateSignal.MPedCalcFundamental.NumEventsDump: 500
|
|---|
| 326 | #MJCalibrateSignal.MPedCalcFundamental.NumAreasDump: 500
|
|---|
| 327 | #MJCalibrateSignal.MPedCalcFundamental.NumSectorsDump: 500
|
|---|
| 328 | #MJCalibrateSignal.MPedCalcFundamental.ExtractWinFirst: 17
|
|---|
| 329 | #MJCalibrateSignal.MPedCalcFundamental.ExtractWinSize: 6
|
|---|
| 330 | #MJCalibrateSignal.MPedCalcFundamental.CheckWinFirst: 0
|
|---|
| 331 | #MJCalibrateSignal.MPedCalcFundamental.CheckWinSize: 29
|
|---|
| 332 | #MJCalibrateSignal.MPedCalcFundamental.MaxSignalVar: 40
|
|---|
| 333 |
|
|---|
| 334 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.PedestalUpdate: yes
|
|---|
| 335 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.NumDump: 500
|
|---|
| 336 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.NumEventsDump: 500
|
|---|
| 337 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.NumAreasDump: 500
|
|---|
| 338 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.NumSectorsDump: 500
|
|---|
| 339 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.ExtractWinFirst: 17
|
|---|
| 340 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.ExtractWinSize: 6
|
|---|
| 341 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.CheckWinFirst: 0
|
|---|
| 342 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.CheckWinSize: 29
|
|---|
| 343 | #MJCalibrateSignal.MPedCalcFromExtractorRndm.MaxSignalVar: 40
|
|---|
| 344 |
|
|---|
| 345 | #MJCalibrateSignal.MPedCalcFromExtractor.PedestalUpdate: yes
|
|---|
| 346 | #MJCalibrateSignal.MPedCalcFromExtractor.NumDump: 500
|
|---|
| 347 | #MJCalibrateSignal.MPedCalcFromExtractor.NumEventsDump: 500
|
|---|
| 348 | #MJCalibrateSignal.MPedCalcFromExtractor.NumAreasDump: 500
|
|---|
| 349 | #MJCalibrateSignal.MPedCalcFromExtractor.NumSectorsDump: 500
|
|---|
| 350 | #MJCalibrateSignal.MPedCalcFromExtractor.ExtractWinFirst: 17
|
|---|
| 351 | #MJCalibrateSignal.MPedCalcFromExtractor.ExtractWinSize: 6
|
|---|
| 352 | #MJCalibrateSignal.MPedCalcFromExtractor.CheckWinFirst: 0
|
|---|
| 353 | #MJCalibrateSignal.MPedCalcFromExtractor.CheckWinSize: 29
|
|---|
| 354 | #MJCalibrateSignal.MPedCalcFromExtractor.MaxSignalVar: 40
|
|---|
| 355 |
|
|---|
| 356 | # -------------------------------------------------------------------------
|
|---|
| 357 | # Configure the interlaced calibration updates
|
|---|
| 358 | # -------------------------------------------------------------------------
|
|---|
| 359 | #MJCalibrateSignal.MCalibCalcFromPast.UpdateWithFFactorMethod: yes
|
|---|
| 360 | #MJCalibrateSignal.MCalibCalcFromPast.NumEventsDump: 500
|
|---|
| 361 | #MJCalibrateSignal.MCalibCalcFromPast.UpdateNumPhes: yes
|
|---|
| 362 | #MJCalibrateSignal.MCalibCalcFromPast.NumPhesDump: 10
|
|---|
| 363 | #MJCalibrateSignal.MCalibrationChargeCalc.Debug: no
|
|---|
| 364 |
|
|---|
| 365 | # -------------------------------------------------------------------------
|
|---|
| 366 | # Use this if you want to change the signal extractor
|
|---|
| 367 | # -------------------------------------------------------------------------
|
|---|
| 368 | MJCalibrateSignal.ExtractSignal.LoGainSwitch: 150
|
|---|
| 369 | #MJCalibrateSignal.ExtractSignal.LoGainStretch: 1.5
|
|---|
| 370 | #MJCalibrateSignal.ExtractInterlaced.LoGainStretch: 1.5
|
|---|
| 371 |
|
|---|
| 372 | # -------------------------------------------------------------------------
|
|---|
| 373 | # Setup calibration of data
|
|---|
| 374 | # -------------------------------------------------------------------------
|
|---|
| 375 | # Type of used data format: raw,root,MC
|
|---|
| 376 | #MJCalibrateSignal.DataType: Root
|
|---|
| 377 | # Type if you set a colour explicitely from outside (only TESTS!!!)
|
|---|
| 378 | #MJCalibrateSignal.MCalibColorSet.ExpicitColor: green,blue,uv,ct1
|
|---|
| 379 | #MJCalibrateSignal.MCalibrateData.PedestalFlag: Event
|
|---|
| 380 | #MJCalibrateSignal.MCalibrateData.ScaleFactor: 1
|
|---|
| 381 | MJCalibrateSignal.MCalibrateData.FileNameScale: resources/calibration.rc
|
|---|
| 382 | #MJCalibrateSignal.MCalibrateData.CalibrationMode: Default
|
|---|
| 383 | #MJCalibrateSignal.MCalibrateData.CalibConvMinLimit: 0.01
|
|---|
| 384 | #MJCalibrateSignal.MCalibrateData.CalibConvMaxLimit: 5.
|
|---|
| 385 | #MJCalibrateSignal.Interlaced: yes
|
|---|
| 386 | #MJCalibrateSignal.RelTimesUpdate: no
|
|---|
| 387 | #MJCalibrateSignal.PulsePosCheck: yes
|
|---|
| 388 |
|
|---|
| 389 | # -------------------------------------------------------------------------
|
|---|
| 390 | # Setup level for determining of bad pixels
|
|---|
| 391 | # -------------------------------------------------------------------------
|
|---|
| 392 | #MJCalibrateSignal.MBadPixelsCalc.PedestalLevel: 3.0
|
|---|
| 393 | #MJCalibrateSignal.MBadPixelsCalc.PedestalLevelVariance: 3.0
|
|---|
| 394 | #MJCalibrateSignal.MBadPixelsTreat.NumMinNeighbors: 3
|
|---|
| 395 | #MJCalibrateSignal.MBadPixelsTreat.MaxArrivalTimeDiff: 1.0
|
|---|
| 396 | #MJCalibrateSignal.MBadPixelsTreat.UseInterpolation: yes
|
|---|
| 397 | #MJCalibrateSignal.MBadPixelsTreat.ProcessPedestalEvt: yes
|
|---|
| 398 | #MJCalibrateSignal.MBadPixelsTreat.ProcessPedestalRun: no
|
|---|
| 399 | #MJCalibrateSignal.MBadPixelsTreat.ProcessTimes: yes
|
|---|
| 400 | #MJCalibrateSignal.MBadPixelsTreat.UseCentralPixel: no
|
|---|
| 401 | #MJCalibrateSignal.MBadPixelsTreat.HardTreatment: no
|
|---|
| 402 |
|
|---|
| 403 | # -------------------------------------------------------------------------
|
|---|
| 404 | # Setup interlaced calibration events histogramming
|
|---|
| 405 | # -------------------------------------------------------------------------
|
|---|
| 406 | #MJCalibrateSignal.MHCalibrationChargeCam.Debug: no
|
|---|
| 407 | #MJCalibrateSignal.MHCalibrationChargeCam.LoGain: yes
|
|---|
| 408 | MJCalibrateSignal.MHCalibrationChargeCam.Oscillations: no
|
|---|
| 409 | #MJCalibrateSignal.MHCalibrationChargeCam.SizeCheck: yes
|
|---|
| 410 | #MJCalibrateSignal.MHCalibrationChargeCam.Averageing: yes
|
|---|
| 411 | #MJCalibrateSignal.MHCalibrationChargeCam.HiGainNbins: 500
|
|---|
| 412 | #MJCalibrateSignal.MHCalibrationChargeCam.HiGainFirst: -98.
|
|---|
| 413 | #MJCalibrateSignal.MHCalibrationChargeCam.HiGainLast: 1902.
|
|---|
| 414 | #MJCalibrateSignal.MHCalibrationChargeCam.HiGainLast: 1899.5
|
|---|
| 415 | MJCalibrateSignal.MHCalibrationChargeCam.LoGainNbins: 250
|
|---|
| 416 | MJCalibrateSignal.MHCalibrationChargeCam.LoGainFirst: -98
|
|---|
| 417 | MJCalibrateSignal.MHCalibrationChargeCam.LoGainLast: 902
|
|---|
| 418 | #MJCalibrateSignal.MHCalibrationChargeCam.TimeLowerLimit: 1.
|
|---|
| 419 | #MJCalibrateSignal.MHCalibrationChargeCam.TimeUpperLimit: 3.
|
|---|
| 420 | #MJCalibrateSignal.MHCalibrationChargeCam.NumHiGainSaturationLimit: 0.02
|
|---|
| 421 | #MJCalibrateSignal.MHCalibrationChargeCam.NumLoGainSaturationLimit: 0.005
|
|---|
| 422 | #MJCalibrateSignal.MHCalibrationChargeCam.ProbLimit: 0.0001
|
|---|
| 423 | #MJCalibrateSignal.MHCalibrationChargeCam.OverflowLimit: 0.005
|
|---|
| 424 | MJCalibrateSignal.MHCalibrationChargeCam.PulserFrequency: 50
|
|---|
| 425 |
|
|---|
| 426 | # -------------------------------------------------------------------------
|
|---|
| 427 | # Setup relative time interlaced calibration
|
|---|
| 428 | # -------------------------------------------------------------------------
|
|---|
| 429 | #MJCalibrateSignal.MHCalibrationRelTimeCam.Debug: no
|
|---|
| 430 | #MJCalibrateSignal.MHCalibrationRelTimeCam.LoGain: no
|
|---|
| 431 | MJCalibrateSignal.MHCalibrationRelTimeCam.Oscillations: no
|
|---|
| 432 | #MJCalibrateSignal.MHCalibrationRelTimeCam.SizeCheck: yes
|
|---|
| 433 | #MJCalibrateSignal.MHCalibrationRelTimeCam.Averageing: yes
|
|---|
| 434 | #MJCalibrateSignal.MHCalibrationRelTimeCam.Nbins: 210
|
|---|
| 435 | #MJCalibrateSignal.MHCalibrationRelTimeCam.First: -5.
|
|---|
| 436 | #MJCalibrateSignal.MHCalibrationRelTimeCam.Last: 10.
|
|---|
| 437 | #MJCalibrateSignal.MHCalibrationRelTimeCam.NumHiGainSaturationLimit: 0.25
|
|---|
| 438 | #MJCalibrateSignal.MHCalibrationRelTimeCam.ProbLimit: 0.00001
|
|---|
| 439 | #MJCalibrateSignal.MHCalibrationRelTimeCam.OverflowLimit: 0.005
|
|---|
| 440 | MJCalibrateSignal.MHCalibrationRelTimeCam.PulserFrequency: 50
|
|---|
| 441 |
|
|---|
| 442 | # -------------------------------------------------------------------------
|
|---|
| 443 | # Resource for movie encoding. For more details see IACT wiki
|
|---|
| 444 | # -------------------------------------------------------------------------
|
|---|
| 445 | #MMoviePrepare.FirstSlice: 0
|
|---|
| 446 | #MMoviePrepare.LastSlice: 15
|
|---|
| 447 | #MovieFilter.Condition: MMovieData.fMax>5*MMovieData.fMedianPedestalRms
|
|---|
| 448 | #MImgCleanStd.CleanLevel1: 8.0
|
|---|
| 449 | #MImgCleanStd.CleanLevel2: 4.5
|
|---|
| 450 | #MFEvtNumber.FileName: ganymed00001218.root
|
|---|
| 451 | #MFEvtNumber.Selector: ThetaSquared.fVal<0.04 && DataType.fVal>0.5
|
|---|
| 452 | #MMovieWrite.TargetLength: 5
|
|---|
| 453 | #MMovieWrite.NumEvents: 10
|
|---|
| 454 | #MMovieWrite.Threshold: 3
|
|---|
| 455 | #MMovieWrite.Filename: movie.mpg
|
|---|
| 456 |
|
|---|
| 457 | # -------------------------------------------------------------------------
|
|---|
| 458 | # This is a special option for the datacheck. A task executed as last
|
|---|
| 459 | # task in the event processing task list - in the standard software it
|
|---|
| 460 | # is skipped
|
|---|
| 461 | # -------------------------------------------------------------------------
|
|---|
| 462 | #MJCalibrateSignal.FinalFantasy: MHCamFlorian
|
|---|
