#!/bin/sh
#
# ========================================================================
#
# *
# * This file is part of MARS, the MAGIC Analysis and Reconstruction
# * Software. It is distributed to you in the hope that it can be a useful
# * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
# * It is distributed WITHOUT ANY WARRANTY.
# *
# * Permission to use, copy, modify and distribute this software and its
# * documentation for any purpose is hereby granted without fee,
# * provided that the above copyright notice appear in all copies and
# * that both that copyright notice and this permission notice appear
# * in supporting documentation. It is provided "as is" without express
# * or implied warranty.
# *
#
#
#   Author(s): Daniela Dorner  08/2004 <mailto:dorner@astro.uni-wuerzburg.de>
#
#   Copyright: MAGIC Software Development, 2000-2006
#
#
# ========================================================================
#
# This script launches the datacheck for all runs, which are not yet 
# checked
#
# After checking, if the script is already running, the todolist is 
# written by using the macro getdolist.C
# Then for each run the following steps are done: 
#  - filldotraw.C
#  - sinope (once for data and once for calibration events)
#  - fillsinope
#  - reset ExclusionsDone, so that the result from the datacheck can be 
#    taken into account when doexclusions is running the next time
# If this was successful, the status is inserted into the database using 
# the macro setstatus.C
#

user=`whoami`
program=datacheck
source /home/$user/Mars/datacenter/scripts/sourcefile

set -C

cd $mars

table=RunProcessStatus
column=fDataCheckDone

todofile=$listpath/ToDo-$table-$column
lockfile=$lockpath/lock-getting-$program-list.txt

scriptlogpath=$logpath/run/$program/`date +%Y/%m`
makedir $scriptlogpath
scriptlog=$scriptlogpath/$program-$datetime.log

date >> $scriptlog 2>&1

# check if there are already todo files
echo "checking if other todo-files are there" >> $scriptlog 2>&1
if  ls $todofile-[1-9]*.txt >> $scriptlog 2>&1
then 
   echo "other file(s) on disk " >> $scriptlog 2>&1
   echo " -> choose one file and start $program " >> $scriptlog 2>&1
else
   # check if getting of list is already running
   checklock "getting list of" >> $scriptlog 2>&1
   # get todo list
   getdolist  >> $scriptlog 2>&1
   rm -v $lockfile >> $scriptlog 2>&1
fi


# finding a todo file
nr=bla
echo "finding the right todo-file" >> $scriptlog 2>&1
todofiles=`ls -r $listpath/ToDo-$table-$column-*`

echo "todofiles: "${todofiles[@]} >> $scriptlog 2>&1
for todofile in ${todofiles[@]}
do 
   if ! ls $todofile >> $scriptlog 2>&1
   then 
      echo "file is not on disk -> continue" >> $scriptlog 2>&1
      continue
   fi
   lockfile=`echo $todofile | sed -e 's/lists/locks/' -e 's/ToDo/lock/'`
   date > $lockfile >> $scriptlog 2>&1
   checklock=$?
   case $checklock in 
       0)   echo "checklock=$checklock -> setting number" >> $scriptlog 2>&1
            nr=${i}
            break;;
       1)   echo "checklock=$checklock -> file exists -> continue" >> $scriptlog 2>&1;;
       *)   echo "checklock=$checklock -> something went completely wrong" >> $scriptlog 2>&1;;
   esac
done

case $nr in
   bla)      echo "everything is beeing processed -> exit" >> $scriptlog 2>&1
             date  >> $scriptlog 2>&1
             exit;;
   12345678) echo "process nr: "$nr >> $scriptlog 2>&1;;
esac


# get run(s) from todo file
runs=(`cat $todofile`)
if [ "$runs" = "" ]
then 
   echo "nothing to do -> exit"  >> $scriptlog 2>&1
   finish >> $scriptlog 2>&1
fi

# processing run(s)
echo "runs: "${runs[@]} >> $scriptlog 2>&1
for run in ${runs[@]}
do 
   echo "do $program for run "$run >> $scriptlog 2>&1
   no=`printf %08d $run | cut -c 0-2`
   no2=`printf %08d $run`
   var1=$date
   var2=$no2
   rawfile=`find /magic/data/rawfiles/ -name *${run}_[D,P,C,S]_*_E.raw`
   echo "rawfile: "$rawfile >> $scriptlog 2>&1
   date=`find /magic/data/rawfiles/ -name *${run}_[D,P,C,S]_*_E.raw | cut -c 22-31`
   echo "date: "$date >> $scriptlog 2>&1
   # for sinope the date is needed in the format YYYY-MM-DD
   date2=`echo $date | sed -e 's/\//-/g'`
   echo "date2: "$date2 >> $scriptlog 2>&1

   # running filldotraw
   filldotrawpath=$logpath/filldotraw/$date
   makedir $filldotrawpath >> $scriptlog 2>&1
   filldotrawlogfile=$filldotrawpath/filldotraw-$no2.log

   echo "doing filldotraw..." >> $scriptlog 2>&1
   setstatus "start" >> $scriptlog 2>&1

   check1=`root -q -b $macrospath/filldotraw.C+\("\"$rawfile\""\,kFALSE\) | tee $filldotrawlogfile | grep int | sed -e 's/.*(int)//'`

   case $check1 in 
      1)   echo "check1=$check1 -> everything ok -> go on with $program..." >> $scriptlog 2>&1
           ;;
      0)   echo "check1=$check1 -> no connection to db -> continue..." >> $scriptlog 2>&1 
           check="no"
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
      *)   echo "check1=$check1 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
           com=$Ffillraw
           check=$check1
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
   esac
   
   # running sinope 
   sinopepath=$datapath/sinope/$date
   makedir $sinopepath >> $scriptlog 2>&1
   
   sins=( "-dat"  "-cal")
   echo ${sins[@]} >> $scriptlog 2>&1
   for sin in ${sins[@]}
   do 
      sinopefile=sinope$sin$no2
      echo $sinopefile >> $scriptlog 2>&1
      
      echo "running sinope $sin..." >> $scriptlog 2>&1
      ./sinope -b -q -v4 -f $sin --outf=$sinopefile --out=$sinopepath --log=$sinopepath/$sinopefile.log --html=$sinopepath/$sinopefile.html --run=$run --date=$date2  2>> $scriptlog > /dev/null
      check2=$?
      
      case $check2 in 
          0)   echo "check2=$check2 -> everything ok -> go on with $program..." >> $scriptlog 2>&1
               ;;
          *)   echo "check2=$check2 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
               com=$Fsinope
#               comadd=
               check=$check2
               setstatus "stop" >> $scriptlog 2>&1
               continue 2;;
      esac
      check2=1
   done
   
   # running fillsinope
   fillsinopepath=$logpath/fillsinope/$date
   makedir $fillsinopepath >> $scriptlog 2>&1
   fillsinopelogfile=$fillsinopepath/fillsinope-$no2.log

   echo "doing fillsinope..." >> $scriptlog 2>&1
   check3=`root -q -b $macrospath/fillsinope.C+\($run\,"\"$datapath\""\,kFALSE\) | tee $fillsinopelogfile | grep int | sed -e 's/.*(int)//'`

   case $check3 in 
      1)   echo "check3=$check3 -> everything ok -> set status..." >> $scriptlog 2>&1
           ;;
      0)   echo "check3=$check3 -> no connection to db -> continue..." >> $scriptlog 2>&1 
           check="no"
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
      *)   echo "check3=$check3 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
           com=$Ffillsinope
           check=$check3
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
   esac

   # resetting the status for exclusions
   echo "resetting the status for fExclusionsDone for date $date2" >> $scriptlog 2>&1
   resetlogpath=$logpath/resetexclusions/$date
   echo "resetlogpath: $resetlogpath" >> $scriptlog 2>&1
   makedir $resetlogpath >> $scriptlog 2>&1
   resetlog=$resetlogpath/reset-exclusions-$no2-$date2.log

   check5=`root -q -b $macrospath/resetcolumn.C+\("\"fExclusionsDone\""\,"\"SequenceBuildStatus\""\,"\"$date2\""\,"\"$date2\""\,kFALSE\) | tee $resetlog | grep int | sed -e 's/(int)//'`
   case $check5 in
      1)   echo "check5=$check5 -> everything ok, fExclusions have been reset " >> $scriptlog 2>&1
           ;;
      0)   echo "check5=$check5 -> no connection to db -> continue..." >> $scriptlog 2>&1 
           check="no"
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
      *)   echo "check5=$check5 -> ERROR -> step could not be resetted -> repeat step " >> $scriptlog 2>&1
           com=$Fresetexcl
           comadd=`echo $date2 | sed -e 's/-//g'`
           check=$check5
           setstatus "stop" >> $scriptlog 2>&1
           continue ;;
   esac

   # set status
   echo "inserting the status for the $program for run $run into the db" >> $scriptlog 2>&1
   statustime="Now()"
   failed="NULL"
   starttime="NULL"
   failedtime="NULL"
   var1=$date
   var2=$no2
   setstatus "stop" >> $scriptlog 2>&1
done

finish >> $scriptlog 2>&1