#!/bin/sh
#
# ========================================================================
#
# *
# * This file is part of MARS, the MAGIC Analysis and Reconstruction
# * Software. It is distributed to you in the hope that it can be a useful
# * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
# * It is distributed WITHOUT ANY WARRANTY.
# *
# * Permission to use, copy, modify and distribute this software and its
# * documentation for any purpose is hereby granted without fee,
# * provided that the above copyright notice appear in all copies and
# * that both that copyright notice and this permission notice appear
# * in supporting documentation. It is provided "as is" without express
# * or implied warranty.
# *
#
#
#   Author(s): Daniela Dorner  08/2004 <mailto:dorner@astro.uni-wuerzburg.de>
#
#   Copyright: MAGIC Software Development, 2000-2007
#
#
# ========================================================================
#
# This script launches the datacheck for all runs, which are not yet 
# checked
#
# Get todo file
# Then for each run the following steps are done: 
#  - filldotraw.C
#  - sinope (once for data and once for calibration events)
#  - fillsinope
#  - reset ExclusionsDone, so that the result from the datacheck can be 
#    taken into account when doexclusions is running the next time
# If this was successful, the status is inserted into the database using 
# the function setstatus.
#

source `dirname $0`/sourcefile
printprocesslog "INFO starting $0"
echo "This script has not been adapted to the new file structure (MAGIC II). "
echo "Only the usage of getodo has been adapted, but not tested."
echo "Please adapt it before using it."
exit

program=datacheck
column=fDataCheckDone

set -C

scriptlog=$runlogpath/$program-$datetime.log
date >> $scriptlog 2>&1

# get run # 
gettodo "1" >> $scriptlog 2>&1
run=${primaries[0]}
telnum=${primaries[1]}
filenum=${primaries[2]}

# lock sequ
lockfile=$lockpath/lock-$table-$column-$run.txt
checklock >> $scriptlog 2>&1

cd $mars

echo "do $program for run "$run >> $scriptlog 2>&1
printprocesslog "INFO do $program for run $run"
no=`printf %08d $run | cut -c 0-2`
no2=`printf %08d $run`
query="SELECT DATE_FORMAT(ADDDATE(fRunStart, INTERVAL +13 HOUR), '%Y/%m/%d') FROM RunData where fRunNumber="$run
date=`sendquery`
rawfile=`find /magic/data/rawfiles/$date -name *${run}_[D,P,C,S]_*_E.raw -o -name *${run}_[DPCS]_*_E.raw.gz`
echo "rawfile: "$rawfile >> $scriptlog 2>&1
# for sinope the date is needed in the format YYYY-MM-DD
date2=`echo $date | sed -e 's/\//-/g'`

#primvar=$no2
setstatus "start" >> $scriptlog 2>&1

# running filldotraw
echo "doing filldotraw..." >> $scriptlog 2>&1
filldotrawpath=$logpath/filldotraw/$date
makedir $filldotrawpath >> $scriptlog 2>&1
filldotrawlogfile=$filldotrawpath/filldotraw-$no2.log

check1=`root -q -b $macrospath/filldotraw.C+\("\"$rawfile\""\,kFALSE\) | tee $filldotrawlogfile | intgrep`

case $check1 in 
   1)   echo " check1=$check1 -> everything ok -> go on with $program..." >> $scriptlog 2>&1
        printprocesslog "INFO finished filldotraw.C sucessfully for $rawfile"
        ;;
   0)   echo " check1=$check1 -> no connection to db -> continue..." >> $scriptlog 2>&1 
        printprocesslog "WARN connection to DB failed"
        check="no"
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
   *)   echo " check1=$check1 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
        printprocesslog "ERROR filldotraw.C failed for $rawfile"
        com=$Ffillraw
        check=$check1
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
esac

# running sinope 
printprocesslog "INFO running sinope for $run"
sinopepath=$datapath/sinope/$date
makedir $sinopepath >> $scriptlog 2>&1

sins=( "-dat"  "-cal")
for sin in ${sins[@]}
do 
   sinopefile=sinope$sin$no2
   
   echo "running sinope $sin..." >> $scriptlog 2>&1
   ./sinope -b -q -v4 -f $sin --outf=$sinopefile --out=$sinopepath --log=$sinopepath/$sinopefile.log --html=$sinopepath/$sinopefile.html --run=$run --date=$date2  2>> $scriptlog > /dev/null
   check2=$?
   
   case $check2 in 
      0)   echo " check2=$check2 -> everything ok -> go on with $program..." >> $scriptlog 2>&1
           ;;
      *)   echo " check2=$check2 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
           printprocesslog "ERROR sinope $sin failed for $rawfile"
           com=$Fsinope
#           comadd=
           check=$check2
           setstatus "stop" >> $scriptlog 2>&1
           continue 2;;
   esac
   check2=1
done

# running fillsinope
fillsinopepath=$logpath/fillsinope/$date
makedir $fillsinopepath >> $scriptlog 2>&1
fillsinopelogfile=$fillsinopepath/fillsinope-$no2.log

echo "doing fillsinope..." >> $scriptlog 2>&1
check3=`root -q -b $macrospath/fillsinope.C+\($run\,"\"$datapath\""\,kFALSE\) | tee $fillsinopelogfile | intgrep`

case $check3 in 
   1)   echo " check3=$check3 -> everything ok -> set status..." >> $scriptlog 2>&1
        printprocesslog "INFO finished fillsinope.C sucessfully for run $run"
        ;;
   0)   echo " check3=$check3 -> no connection to db -> continue..." >> $scriptlog 2>&1 
        printprocesslog "WARN connection to DB failed"
        check="no"
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
   *)   echo " check3=$check3 -> ERROR -> step has to be repeated" >> $scriptlog 2>&1
        printprocesslog "ERROR fillsinope.C failed for run $run"
        com=$Ffillsinope
        check=$check3
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
esac

# resetting the status for exclusions
echo "resetting the status for fExclusionsDone for date $date2" >> $scriptlog 2>&1
printprocesslog "INFO resetting fExclusions done for $date2"
resetlogpath=$logpath/resetexclusions/$date
makedir $resetlogpath >> $scriptlog 2>&1
resetlog=$resetlogpath/reset-exclusions-$no2-$date2.log

check5=`root -q -b $macrospath/resetcolumn.C+\("\"fExclusionsDone\""\,"\"SequenceBuildStatus\""\,"\"$date2\""\,"\"$date2\""\,kFALSE\) | tee $resetlog | intgrep`
case $check5 in
   1)   echo " check5=$check5 -> everything ok, fExclusions have been reset " >> $scriptlog 2>&1
        printprocesslog "INFO resetted fExclusions done for $date2 successfully"
        ;;
   0)   echo " check5=$check5 -> no connection to db -> continue..." >> $scriptlog 2>&1 
        printprocesslog "WARN connection to DB failed"
        check="no"
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
   *)   echo " check5=$check5 -> ERROR -> step could not be resetted -> repeat step " >> $scriptlog 2>&1
        printprocesslog "ERROR resetcolumn.C failed for date $date2"
        com=$Fresetexcl
        comadd=`echo $date2 | sed -e 's/-//g'`
        check=$check5
        setstatus "stop" >> $scriptlog 2>&1
        continue ;;
esac

# set status
statustime="Now()"
failed="NULL"
starttime="NULL"
failedtime="NULL"
setstatus "stop" >> $scriptlog 2>&1

finish >> $scriptlog 2>&1