source: trunk/MagicSoft/Mars/ganymed.rc@ 8415

Last change on this file since 8415 was 8017, checked in by tbretz, 18 years ago
*** empty log message ***
File size: 7.5 KB
Line 
1# ==========================================================================
2#############################################################################
3# ==========================================================================
4# General
5# ==========================================================================
6#############################################################################
7# ==========================================================================
8
9# -------------------------------------------------------------------------
10# Use this if you want to setup the logging stream for the jobs
11# (overwrites command line options)
12# -------------------------------------------------------------------------
13#MLog.VerbosityLevel: 2
14#MLog.DebugLevel: 1
15#MLog.NoColors: yes
16
17# ==========================================================================
18#############################################################################
19# ==========================================================================
20# Cuts
21# ==========================================================================
22#############################################################################
23# ==========================================================================
24
25# -------------------------------------------------------------------------
26# Use this if you want to write output to somewhere here you can give
27# the output path
28# -------------------------------------------------------------------------
29#MJCuts.PathOut: .
30
31# -------------------------------------------------------------------------
32# Use this to setup binnings. For more details see: MBinning::ReadEnv
33# -------------------------------------------------------------------------
34BinningAlpha.Raw: 36 0 90
35BinningFalseSource.Raw: 91 -1.5 1.5
36#BinningTheta.Raw: 50 0 60 cos
37BinningWidth.Raw: 50 0 1
38BinningLength.Raw: 25 0 1
39BinningDist.Raw: 25 0 2
40BinningMaxDist.Raw: 25 0 2
41
42# -------------------------------------------------------------------------
43# Using the starguider for pointing correction.
44# To switch it off use "MPointingDevCalc.MaxAbsDev: -1"
45# -------------------------------------------------------------------------
46#MPointingDevCalc.MaxAbsDev: 15
47#MPointingDevCalc.NumMinStars: 8
48#MPointingDevCalc.NsbLevel: 3.0
49#MPointingDevCalc.NsbMin: 30
50#MPointingDevCalc.NsbMax: 60
51#MPointingDevCalc.Dx -7
52#MPointingDevCalc.Dy 16
53#MPointingDevCalc.MaxAge 1.0
54
55# -------------------------------------------------------------------------
56# Setup the misfocussing correction
57# -------------------------------------------------------------------------
58#MSrcPosCorrect.Dx: 0
59#MSrcPosCorrect.Dy: 0
60
61# -------------------------------------------------------------------------
62# Setup fit mode and ranges
63# -------------------------------------------------------------------------
64#MAlphaFitter.SignalIntegralMax: 15
65#MAlphaFitter.SignalFitMax: 25
66#MAlphaFitter.BackgroundFitMin: 35
67#MAlphaFitter.BackgroundFitMax: 75
68#MAlphaFitter.ScaleMin: 35
69#MAlphaFitter.ScaleMax: 80
70#MAlphaFitter.PolynomOrder: 2
71#MAlphaFitter.ScaleMode: None
72
73# -------------------------------------------------------------------------
74# Define here which histogram class to use to determin the signal.
75# Currently availyble: MHAlpha, MHTheta <default>
76# -------------------------------------------------------------------------
77#MJCut.NameHist: MHAlpha
78
79# Be carefull: The spectrum might be done with a different binning
80# This might change the scale factor
81#MHThetaSq.NumBinsSignal: 3
82#MHThetaSq.NumBinsTotal: 75
83
84# -------------------------------------------------------------------------
85# To get a meaningfull false source plot in wobble mode use magic cuts
86# and the following two lines.
87# -------------------------------------------------------------------------
88MJCut.NameHistFS: MHDisp
89
90MHDisp.Smearing: 0.06
91#MHDisp.Wobble: Yes
92#MHDisp.ScaleMin: 0.325
93#MHDisp.ScaleMax: 0.475
94
95# -------------------------------------------------------------------------
96# To get use a random source position in the off data with the distribution
97# in the camera of the on-data
98# -------------------------------------------------------------------------
99#MJCut.RandomSourcePosition: Yes
100
101# -------------------------------------------------------------------------
102# There are three cuts:
103# Cut0: After energy estimation, before writing summary file
104# Cut1: After writing summary file before filling false source plots
105# Cut2: After filling false source plots before filling alpha plots
106# Cut3: After filling alpha plots (eg. Alpha cuts) for image parameter
107# display
108# -------------------------------------------------------------------------
109Cut0.Inverted: Yes
110Cut1.Inverted: Yes
111Cut2.Inverted: Yes
112Cut3.Inverted: Yes
113
114# Get rid of triangular events...
115Cut0.Condition: ({0} || {1}) && {2} && {3} && {4} && {5} && {6}
116Cut0.0: MImagePar.fNumSatPixelsHG < 1
117Cut0.1: MHillas.GetArea*(MGeomCam.fConvMm2Deg^2) > (0.003*MImagePar.fNumSatPixelsHG) + 0.0325
118Cut0.2: MNewImagePar.fNumUsedPixels>5
119Cut0.3: MNewImagePar.fLeakage1 < 0.3
120Cut0.4: MImagePar.fNumSatPixelsLG<2
121Cut0.5: MImagePar.fNumIslands<3
122Cut0.6: log10(MNewImagePar.fConc1) < (-0.371)*log10(MHillas.fSize) + 0.596
123
124# ---------- SETUP FOR ONOFF-MODE -----------
125MAlphaFitter.ScaleMin: 0.137
126MAlphaFitter.ScaleMax: 0.640
127MAlphaFitter.BackgroundFitMin: 0.137
128MAlphaFitter.BackgroundFitMax: 1.000
129MAlphaFitter.PolynomOrder: 1
130MAlphaFitter.ScaleMode: OffRegion
131MAlphaFitter.SignalFunction: ThetaSq
132
133# For more details on the magic cuts see its class reference
134Cut1.Condition: MFMagicCuts
135Cut1.ThetaCut: None
136# Parametrization of Disp
137Cut1.Param0: 1.3245
138Cut1.Param6: 8.2957
139Cut1.Param7: 0.8677
140# Parametrization for sign of disp (m3long)
141Cut1.Param5: -0.07
142# ThetaSq-Cut
143Cut1.Param1: 0.22
144# Area-Cut
145Cut1.Param2: 0.215
146Cut1.Param3: 5.486
147Cut1.Param4: 0.0897
148
149# ---------- SETUP FOR WOBBLE-MODE -----------
150#MAlphaFitter.ScaleMode: none
151#MAlphaFitter.BackgroundFitMin: 0.09
152#MAlphaFitter.BackgroundFitMax: 0.25
153#MAlphaFitter.PolynomOrder: 1
154#MAlphaFitter.SignalFunction: ThetaSq
155
156# For more details on the magic cuts see its class reference
157#Cut1.Condition: MFMagicCuts
158#Cut1.ThetaCut: Off
159# Parametrization of Disp
160#Cut1.Param0: 1.221
161#Cut1.Param6: 13.425
162#Cut1.Param7: 1.04343
163# Parametrization for sign of disp (m3long)
164#Cut1.Param5: -0.07
165# ThetaSq-Cut
166#Cut1.Param1: 0.22
167# Area-Cut
168#Cut1.Param2: 0.222
169#Cut1.Param3: 5.524
170#Cut1.Param4: 0.0878
171
172# ---------- SETUP TO USE RANDOM FOREST -----------
173
174# To switch on random forest uncomment the following lines
175#Cut1.HadronnessCut: Hadronness
176#Cut1.Param8: 0.5
177#Cut1.Param9: 100
178
179# To use both, hadronness and area cut do
180#Cut1.HadronnessCut: All
181
182
183# -------------------------------------------------------------------------
184# Use this to executa a task (eg to calc hadronness) before Cut1
185# -------------------------------------------------------------------------
186# CalcHadronness: MRanForestCalc
187# CalcHadronness.FileName: rf-separation.root
188# CalcHadronness.NameOutput: Hadronness
189# CalcHadronness.Debug: No
190
191# -------------------------------------------------------------------------
192# Use this to executa a task (eg to calc disp) before Cut1
193# -------------------------------------------------------------------------
194# CalcDisp: MRanForestCalc
195# CalcDisp.FileName: rf-disp.root
196# CalcDisp.NameOutput: Disp
197# CalcDisp.Debug: No
198# Cut1.CalcDisp: No
199
Note: See TracBrowser for help on using the repository browser.