source: trunk/MagicSoft/Mars/manalysis/MPedCalcPedRun.cc@ 3158

/* ======================================================================== *\
!
! *
! * This file is part of MARS, the MAGIC Analysis and Reconstruction
! * Software. It is distributed to you in the hope that it can be a useful
! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
! * It is distributed WITHOUT ANY WARRANTY.
! *
! * Permission to use, copy, modify and distribute this software and its
! * documentation for any purpose is hereby granted without fee,
! * provided that the above copyright notice appear in all copies and
! * that both that copyright notice and this permission notice appear
! * in supporting documentation. It is provided "as is" without express
! * or implied warranty.
! *
!
!
!   Author(s): Josep Flix 04/2001 <mailto:jflix@ifae.es>
!   Author(s): Thomas Bretz 05/2001 <mailto:tbretz@astro.uni-wuerzburg.de>
!   Author(s): Sebastian Commichau 12/2003 
!   Author(s): Javier Rico 01/2004 <mailto:jrico@ifae.es>
!   Author(s): Markus Gaug 01/2004 <mailto:markus@ifae.es>
!
!   Copyright: MAGIC Software Development, 2000-2004
!
!
\* ======================================================================== */

/////////////////////////////////////////////////////////////////////////////
//
//   MPedCalcPedRun
//
// This task takes a pedestal run file and fills MPedestalCam during
// the Process() with the pedestal and rms computed in an event basis.
// In the PostProcess() MPedestalCam is finally filled with the pedestal
// mean and rms computed in a run basis.
// More than one run (file) can be merged
//
//
// Actually, MPedCalcPedRun applies the following formula (1):
// 
// PedRMS = Sqrt(  (sum(x_i^2) - sum(x_i)^2/n) / n-1 / 14 )
// 
// where x_i is the sum of 14 FADC slices and sum means the sum over all
// events, n is the number of events.
// 
// For a high number of events, this formula is equivalent to formula (2):
// 
// PedRMS = Sqrt(  (<x_i*x_i> - <x_i>*<x_i>) / 14  )
// 
// where <> is the mean over all events and x_i again the sum over the 14
// slices.
// 
// If you assume statistical equivalence of all slices (say, all have equal
// offset and are not correlated and fluctuate Gaussian), it should also be
// equivalent to (old formula) (3):
// 
// PedRMS = Sqrt(  (<p_i*p_i> - <p_i>*<p_i>) ) 
// 
// which is the RMS per slice of a single slice (p_i) and 
// <> the mean over the total number of measurements, i.e. n*14.
// 
// If we assume that at least our pairs fluctuate independently and Gaussian,
// then we can use the actual formula (1) in order to get 
// fluctuations of pairs by the transformation:
// 
// PedRMS/pair = PedRMS (form. (3)) * Sqrt(2)
// 
// (However, we know that our slice-to-slice fluctuations are not Gaussian
// (and moreover asymmetric) and that they are also correlated.)
// 
// 
//  Input Containers:
//   MRawEvtData
//
//  Output Containers:
//   MPedestalCam
//
//
/////////////////////////////////////////////////////////////////////////////
#include "MPedCalcPedRun.h"

#include "MParList.h"

#include "MLog.h"
#include "MLogManip.h"

#include "MRawRunHeader.h"  
#include "MRawEvtPixelIter.h"
#include "MRawEvtData.h"

#include "MPedestalPix.h"
#include "MPedestalCam.h"

#include "MExtractedSignalPix.h"
#include "MExtractedSignalCam.h"


#include "MGeomCamMagic.h"

ClassImp(MPedCalcPedRun);

using namespace std;

// --------------------------------------------------------------------------
//
// default constructor
//
MPedCalcPedRun::MPedCalcPedRun(const char *name, const char *title)
    : fRawEvt(NULL), fPedestals(NULL), fSignals(NULL)
{
    fName  = name  ? name  : "MPedCalcPedRun";
    fTitle = title ? title : "Task to calculate pedestals from pedestal runs raw data";

    AddToBranchList("fHiGainPixId");
    AddToBranchList("fHiGainFadcSamples");

    Clear();
}

void MPedCalcPedRun::Clear(const Option_t *o)
{

  fNumHiGainSamples = 0;
  fNumPixels        = 0;
  fNumSamplesTot    = 0;
  
  fRawEvt    = NULL;
  fPedestals = NULL;
  fSignals   = NULL;

  return;
  
}


// --------------------------------------------------------------------------
//
// Look for the following input containers:
//
//  - MRawEvtData
// 
// The following output containers are also searched and created if
// they were not found:
//
//  - MPedestalCam
//
Int_t MPedCalcPedRun::PreProcess( MParList *pList )
{
    fRawEvt = (MRawEvtData*)pList->FindObject("MRawEvtData");
    if (!fRawEvt)
    {
        *fLog << err << "MRawEvtData not found... aborting." << endl;
        return kFALSE;
    }

    fPedestals = (MPedestalCam*)pList->FindCreateObj("MPedestalCam");
    if (!fPedestals)
        return kFALSE;

    fSignals = (MExtractedSignalCam*)pList->FindObject("MExtractedSignalCam");

    fNumSamplesTot=0;

    return kTRUE;
}

// --------------------------------------------------------------------------
//
// The ReInit searches for the following input containers:
//  - MRawRunHeader
//
// It also initializes the data arrays fSumx and fSumx2 
// (only for the first read file)
// 
Bool_t MPedCalcPedRun::ReInit(MParList *pList)
{
    const MRawRunHeader *runheader = (MRawRunHeader*)pList->FindObject("MRawRunHeader");
    if (!runheader)
    {
        *fLog << warn << dbginf;
        *fLog << "Warning - cannot check file type, MRawRunHeader not found." << endl;
    }
    else
        if (runheader->GetRunType() == kRTMonteCarlo)
            return kTRUE;

    fNumPixels = fPedestals->GetSize();

    if(fSumx.GetSize()==0)
      {
        fSumx.Set(fNumPixels);
        fSumx2.Set(fNumPixels);

        fSumx.Reset();
        fSumx2.Reset();
      }

    // Calculate an even number for the hi gain samples to avoid
    // biases due to the fluctuation in pedestal from one slice to
    // the other one
    fNumHiGainSamples = runheader->GetNumSamplesHiGain() & ~1;

    return kTRUE;
}
// --------------------------------------------------------------------------
//
// Fill the MPedestalCam container with the signal mean and rms for the event.
// Store the measured signal in arrays fSumx and fSumx2 so that we can 
// calculate the overall mean and rms in the PostProcess()
//
Int_t MPedCalcPedRun::Process()
{
    MRawEvtPixelIter pixel(fRawEvt);

    while (pixel.Next())
    {
              Byte_t *ptr = pixel.GetHiGainSamples();
        const Byte_t *end = ptr + fNumHiGainSamples;

        UInt_t sum = 0;
        UInt_t sqr = 0;
        
        do
          {
            sum += *ptr;
            sqr += *ptr * *ptr;
          }
        while (++ptr != end);
        
        const Float_t msum = (Float_t)sum;

        const UInt_t idx = pixel.GetPixelId();
        //
        // These three lines have been uncommented by Markus Gaug
        // If anybody needs them, please contact me!!
        //
        //      const Float_t higainped = msum/fNumHiGainSamples;
        //      const Float_t higainrms = TMath::Sqrt((msqr-msum*msum/fNumHiGainSamples)/(fNumHiGainSamples-1.));
        //      (*fPedestals)[idx].Set(higainped, higainrms);
        
        fSumx[idx]  += msum;
        //
        // The old version:
        //
        //       const Float_t msqr = (Float_t)sqr;
        //      fSumx2[idx] += msqr;
        //
        // The new version:
        //
        fSumx2[idx] += msum*msum;

    }
    
    fPedestals->SetReadyToSave();
    fNumSamplesTot += fNumHiGainSamples;

    
    return kTRUE;
}

// --------------------------------------------------------------------------
//
// Compute signal mean and rms in the whole run and store it in MPedestalCam
//
Int_t MPedCalcPedRun::PostProcess()
{

  // Compute pedestals and rms from the whole run
  const ULong_t n     = fNumSamplesTot;
  const ULong_t nevts = GetNumExecutions();

  MRawEvtPixelIter pixel(fRawEvt);
  
  while (pixel.Next())
    {
      const Int_t pixid = pixel.GetPixelId();
      
      const Float_t sum  = fSumx.At(pixid);
      const Float_t sum2 = fSumx2.At(pixid);
      
      const Float_t higainped = sum/n;
      //
      // The old version:
      //
      //      const Float_t higainrms = TMath::Sqrt((sum2-sum*sum/n)/(n-1.));
      //
      // The new version:
      //
      // 1. Calculate the Variance of the sums:
      Float_t higainVar = (sum2-sum*sum/nevts)/(nevts-1.);
      // 2. Scale the variance to the number of slices:
      higainVar /= (Float_t)fNumHiGainSamples;
      // 3. Calculate the RMS from the Variance:
      const Float_t higainrms = TMath::Sqrt(higainVar);

      (*fPedestals)[pixid].Set(higainped, higainrms);

    }
  
  fPedestals->SetTotalEntries(fNumSamplesTot);

  return kTRUE;
}